Playback problems and video freezes due to plugins being used on video clips?

I am editing with Premiere, and dealing with playback issues and video freezes as I apply plugins to each video clip. Not sure how to fix this problem. I am a mac user, but I cannot upgrade my graphics card, so I am wondering how to fix this issue.

Hi,
More info will be needed to help. Please refer to this post.
http://forums.adobe.com/message/4200840#4200840
Thanks!
Peter Garaway
Adobe
Premiere Pro

Similar Messages

I have an ipod that I have been using for iTunes, when I connect now to sync, and hit the eject ipod, I get a warning it can't eject due to applications being used in another program. I am having trouble disconnecting. Help!

I am having a problem with the new iTunes store. I can connect my ipod, and it will show that it is syncing. Once the sync is complete on iTunes, my ipod still shows that it is connected, do not eject. I have not had a problem with this until the new verision of iTunes. When I go to eject my ipod, it tells me that it can't eject due to application being used in another program. I did receive an ipad 2 for Christmas, that I also sync with iTunes, but only the ipad shows up in my devices on the site, what happened to my ipod device and how to add it back to devices? Help is greatly appreciated. Thanks.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

"No rates for 63021010 and Excise indicator 2; Normal rates being used"

Hi expert ,
When we create Excise order and save and then use va02 in change mode than show error " No rates for 63021010 and Excise indicator 2; Normal rates being used " we have all ready maintaind chapter id, and taxes and excise duty comes all well. but problam is showing msg , when we enter press then remove msg, its so tough for 100 items, plz give me soln for change status group.
REgards,
sohail

Hi,
Please check "Excise tax rate" in J1ID and check whether you have mantained Excise rate againts Chapter ID and Exe. Ind 1 or 2.
The final excise indicator for excise duty is maintained based on the excise classification of the company and vendor, company and customer. For each of the final indicators, the excise duty rates are maintained.
Regards,

Playback pauses and ipod freezes then unfreezes after 20 seconds

Description of the issue:
When playing continuously song after song, the ipod freezes and music stops about 5 seconds in to most songs. After about 20 seconds, playback resumes and the ipod is responsive again.
Symptoms:
Only happens after one song ends and the next one begins.
Doesn't happen every time
iPod freezes and won't accept commands from the click wheel.
Troubleshooting: Reset has not resolved the issue.
Background: Worked fine before last night, when I added some more files to my itunes library by convering them from wma to AAC. I received the message during synch that itunes couldn't copy all the files from itunes, since there's not enough room on the ipod.
Once I get home today, I'll try reformatting, etc.

Try a restore.
See: How to restore the iPod to factory settings.
What account are referring to? iTunes music store?

Incoming Video freezes after a few minutes Using S...

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

IChat v4.05 Video not working - "Camera is being used by another applicatio

The camera is connected... works in photobooth and skype but will not work in iChat. I have no other applications open yet it says its being used.
I opened up terminal and did this command that i read on the forum and got this:
IT317m3:~ ddyke$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
151853.459623 ER_AddFilter (0): Adding [Darren [email protected]]->[0]
151853.459676 setLocalUserName: Darren [email protected]
151853.462025 Creating a port mapping from 54469 to 16402...
151853.463633 Default video size is (640 x 480)
151853.464791 H264: (640 x 480) @ 20 fps
151853.466938 H264: (320 x 240) @ 30 fps
151853.467982 H264: (160 x 120) @ 30 fps
151853.469014 H263: (352 x 288) @ 30 fps
151853.470034 H263: (176 x 144) @ 30 fps
151853.470173 ######################################
151853.470187 # SoundDec_Create(81536 --> 393219) #
151853.470196 ######################################
151853.475062 Leaving SoundDec_Create
151853.475308 ### NEW STATE: to: VC_INIT, from: VC_INVALID
151853.475411 ### NEW STATE: to: VC_IDLE, from: VC_INIT
151853.475459 ++++++++ confStatusMapRemoveAll
151853.475520 ( ) -- mapUserIDToSecurityInfo cleared --
151853.475613 NATTraversal created
151853.475865 QT automatic setting = 16777216
151853.475938 Bandwidth based on QT prefs = 384
151853.521859 Selected microphone is the null device microphone.
151853.522025 vcCapabilitiesOfCPU returns: 0x00000fff
151853.522060 VCCapAudio
151853.522071 VCCapVideo
151853.522078 VCCapMultiAudio
151853.522085 VCCapMultiVideo
151853.522092 VCCapMultiAudioHost
151853.522151 VCCapMultiVideoHost
151853.522191 VCCapRDClient
151853.522203 VCCapRDServer
151853.522209 VCCapRecordAudio
151853.522216 VCCapRecordVideo
151853.522223 VCCapAuxVideoSend
151853.522230 VCCapAuxVideoRecv
151853.522476 BWD: GotBandwidth: 92651757/94003241 (up/down) @[166.7.39.10:0.255.255.255]
151853.522514 BWD bandwidth: 92651 kbits up, 94003 kbits down.
151853.522529 videoNetworkCapable: 1 -- 3 max participants.
151853.522566 audioNetworkCapable: 1 -- 9 max participants.
151853.522576 Supports PCMU wideband for audio: 1 / video: 1
151853.522643 vcCapabilitiesOfNetwork returns: 0x00000fff
151853.522655 VCCapAudio
151853.522693 VCCapVideo
151853.522702 VCCapMultiAudio
151853.522709 VCCapMultiVideo
151853.522716 VCCapMultiAudioHost
151853.522754 VCCapMultiVideoHost
151853.522767 VCCapRDClient
151853.522774 VCCapRDServer
151853.522814 VCCapRecordAudio
151853.522821 VCCapRecordVideo
151853.522827 VCCapAuxVideoSend
151853.522834 VCCapAuxVideoRecv
151853.522841 vcCapabilities returns: 0x00000fff
151853.522881 VCCapAudio
151853.522894 VCCapVideo
151853.522929 VCCapMultiAudio
151853.522940 VCCapMultiVideo
151853.522946 VCCapMultiAudioHost
151853.522953 VCCapMultiVideoHost
151853.522960 VCCapRDClient
151853.522966 VCCapRDServer
151853.522973 VCCapRecordAudio
151853.523011 VCCapRecordVideo
151853.523024 VCCapAuxVideoSend
151853.523060 VCCapAuxVideoRecv
151853.523635 Found 1 cameras:
151853.523735 Microsoft® LifeCam VX-7000 - 18446744073662365696
151853.528086 Microphone devices:
151853.528227 Line In
151853.528362 Microsoft® LifeCam VX-700
151853.528428 Selected microphone is the null device microphone.
151853.528513 vcCapabilitiesOfCPU returns: 0x00000fff
151853.528525 VCCapAudio
151853.528533 VCCapVideo
151853.528540 VCCapMultiAudio
151853.528547 VCCapMultiVideo
151853.528553 VCCapMultiAudioHost
151853.528560 VCCapMultiVideoHost
151853.528567 VCCapRDClient
151853.528574 VCCapRDServer
151853.528581 VCCapRecordAudio
151853.528588 VCCapRecordVideo
151853.528595 VCCapAuxVideoSend
151853.528602 VCCapAuxVideoRecv
151853.528751 BWD: GotBandwidth: 92651757/94003241 (up/down) @[166.7.39.10:0.255.255.255]
151853.528776 BWD bandwidth: 92651 kbits up, 94003 kbits down.
151853.528786 videoNetworkCapable: 1 -- 3 max participants.
151853.528793 audioNetworkCapable: 1 -- 9 max participants.
151853.528801 Supports PCMU wideband for audio: 1 / video: 1
151853.528828 vcCapabilitiesOfNetwork returns: 0x00000fff
151853.528838 VCCapAudio
151853.528845 VCCapVideo
151853.528851 VCCapMultiAudio
151853.528858 VCCapMultiVideo
151853.528865 VCCapMultiAudioHost
151853.528872 VCCapMultiVideoHost
151853.528878 VCCapRDClient
151853.528885 VCCapRDServer
151853.528892 VCCapRecordAudio
151853.528900 VCCapRecordVideo
151853.528907 VCCapAuxVideoSend
151853.528914 VCCapAuxVideoRecv
151853.528921 vcCapabilities returns: 0x00000fff
151853.528928 VCCapAudio
151853.528935 VCCapVideo
151853.528942 VCCapMultiAudio
151853.528949 VCCapMultiVideo
151853.528956 VCCapMultiAudioHost
151853.528963 VCCapMultiVideoHost
151853.528970 VCCapRDClient
151853.528977 VCCapRDServer
151853.528983 VCCapRecordAudio
151853.528991 VCCapRecordVideo
151853.528998 VCCapAuxVideoSend
151853.529005 VCCapAuxVideoRecv
151853.529174 Found 1 cameras:
151853.529200 Microsoft® LifeCam VX-7000 - 18446744073662365696
151853.529462 selectCameraByGUID: 18446744073662365696 returned 1
151853.533680 Microphone devices:
151853.533771 Line In
151853.533858 Microsoft® LifeCam VX-700
151853.533916 Selected mic: Microsoft® LifeCam VX-700
151853.608923 Selected microphone is Microsoft® LifeCam VX-7000.
151853.749143 SNATMAP Configuration: snatmap.mac.com:5678
151854.484457 Found 1 cameras:
151854.484515 Microsoft® LifeCam VX-7000 - 18446744073662365696
151854.484553 selectedCamera GUID returned Microsoft® LifeCam VX-7000
151854.488604 Microphone devices:
151854.488844 Line In
151854.489032 Microsoft® LifeCam VX-700
151854.489120 Selected mic: Microsoft® LifeCam VX-700
151854.501357 Selected microphone is Microsoft® LifeCam VX-7000.
151854.532566 Found 1 cameras:
151854.532633 Microsoft® LifeCam VX-7000 - 18446744073662365696
151854.532666 selectedCamera GUID returned Microsoft® LifeCam VX-7000
151854.536805 Microphone devices:
151854.536927 Line In
151854.537088 Microsoft® LifeCam VX-700
151854.537175 Selected mic: Microsoft® LifeCam VX-700
151854.549480 Selected microphone is Microsoft® LifeCam VX-7000.
151856.963348 in callback
151856.963371 -sdRef 0x15765400 ?
151856.963379 -flags = 00000000
151856.963388 -IFIndex 0 ?
151856.963395 -errorCode == 00000000
151856.963410 -publicAddr == 0.0.0.0
151856.963417 -proto == 16
151856.963424 -privPort == 16402
151856.963432 -publPort == 0
151856.963439 -ttl == 0
151908.750583 Comm reporting flags: 000000EC
151908.850644 CommNAT result:
External IP: 129.171.251.142
External Ports: 44957, 44958, 44959
CNAT_BADTEST ....... 0
CNAT_ISFULLCONE .... 0
CNAT_ISPAT ......... 1
CNAT_ISPATHOST ..... 1
CNAT_TRYPRESERVE ... 0
CNAT_PATINORDER .... 1
CNAT_BLOCKIP ....... 1
CNAT_BLOCKPORT ..... 1
CNAT_LOOPBACK ...... 0
151914.060800 vcCapabilitiesOfCPU returns: 0x00000fff
151914.060851 VCCapAudio
151914.060863 VCCapVideo
151914.060871 VCCapMultiAudio
151914.060878 VCCapMultiVideo
151914.060884 VCCapMultiAudioHost
151914.060891 VCCapMultiVideoHost
151914.060898 VCCapRDClient
151914.060905 VCCapRDServer
151914.060912 VCCapRecordAudio
151914.060918 VCCapRecordVideo
151914.060930 VCCapAuxVideoSend
151914.060937 VCCapAuxVideoRecv
151914.061105 BWD: GotBandwidth: 92651757/94003241 (up/down) @[166.7.39.10:0.255.255.255]
151914.061238 BWD bandwidth: 92651 kbits up, 94003 kbits down.
151914.061249 videoNetworkCapable: 1 -- 3 max participants.
151914.061256 audioNetworkCapable: 1 -- 9 max participants.
151914.061265 Supports PCMU wideband for audio: 1 / video: 1
151914.061295 vcCapabilitiesOfNetwork returns: 0x00000fff
151914.061307 VCCapAudio
151914.061315 VCCapVideo
151914.061321 VCCapMultiAudio
151914.061328 VCCapMultiVideo
151914.061335 VCCapMultiAudioHost
151914.061342 VCCapMultiVideoHost
151914.061349 VCCapRDClient
151914.061356 VCCapRDServer
151914.061362 VCCapRecordAudio
151914.061370 VCCapRecordVideo
151914.061377 VCCapAuxVideoSend
151914.061384 VCCapAuxVideoRecv
151914.061391 vcCapabilities returns: 0x00000fff
151914.061398 VCCapAudio
151914.061405 VCCapVideo
151914.061412 VCCapMultiAudio
151914.061419 VCCapMultiVideo
151914.061426 VCCapMultiAudioHost
151914.061433 VCCapMultiVideoHost
151914.061439 VCCapRDClient
151914.061446 VCCapRDServer
151914.061453 VCCapRecordAudio
151914.061460 VCCapRecordVideo
151914.061467 VCCapAuxVideoSend
151914.061473 VCCapAuxVideoRecv
151914.061485 Found 1 cameras:
151914.061515 Microsoft® LifeCam VX-7000 - 18446744073662365696
151914.177968 Conference_StartCamera for (Microsoft® LifeCam VX-7000) failed (80090010)
151914.290878 VCLocalVideoError
2008-09-19 15:19:14.290 iChat[873:10b] No iChat delegate set for vccLocalVideoError
151914.291525 startPreview returned -2
151914.291736 selectedCamera GUID returned Microsoft® LifeCam VX-7000
151915.244445 cancelPreview returned 0
conference_startcamera
154616.121039 vcCapabilitiesOfCPU returns: 0x00000fff
154616.121069 VCCapAudio
154616.121083 VCCapVideo
154616.121090 VCCapMultiAudio
154616.121098 VCCapMultiVideo
154616.121104 VCCapMultiAudioHost
154616.121111 VCCapMultiVideoHost
154616.121118 VCCapRDClient
154616.121125 VCCapRDServer
154616.121132 VCCapRecordAudio
154616.121139 VCCapRecordVideo
154616.121145 VCCapAuxVideoSend
154616.121152 VCCapAuxVideoRecv
154616.121318 BWD: GotBandwidth: 92651757/94003241 (up/down) @[166.7.39.10:0.255.255.255]
154616.121345 BWD bandwidth: 92651 kbits up, 94003 kbits down.
154616.121354 videoNetworkCapable: 1 -- 3 max participants.
154616.121362 audioNetworkCapable: 1 -- 9 max participants.
154616.121369 Supports PCMU wideband for audio: 1 / video: 1
154616.121397 vcCapabilitiesOfNetwork returns: 0x00000fff
154616.121407 VCCapAudio
154616.121413 VCCapVideo
154616.121420 VCCapMultiAudio
154616.121427 VCCapMultiVideo
154616.121433 VCCapMultiAudioHost
154616.121440 VCCapMultiVideoHost
154616.121447 VCCapRDClient
154616.121453 VCCapRDServer
154616.121460 VCCapRecordAudio
154616.121467 VCCapRecordVideo
154616.121476 VCCapAuxVideoSend
154616.121485 VCCapAuxVideoRecv
154616.121492 vcCapabilities returns: 0x00000fff
154616.121500 VCCapAudio
154616.121507 VCCapVideo
154616.121514 VCCapMultiAudio
154616.121521 VCCapMultiVideo
154616.121528 VCCapMultiAudioHost
154616.121535 VCCapMultiVideoHost
154616.121542 VCCapRDClient
154616.121549 VCCapRDServer
154616.121555 VCCapRecordAudio
154616.121562 VCCapRecordVideo
154616.121569 VCCapAuxVideoSend
154616.121576 VCCapAuxVideoRecv
154616.121587 Found 1 cameras:
154616.121612 Microsoft® LifeCam VX-7000 - 18446744073662365696
154616.233340 Conference_StartCamera for (Microsoft® LifeCam VX-7000) failed (80090010)
154616.345044 VCLocalVideoError
2008-09-19 15:46:16.345 iChat[873:10b] No iChat delegate set for vccLocalVideoError
154616.345574 startPreview returned -2
154616.345687 selectedCamera GUID returned Microsoft® LifeCam VX-7000
154618.231350 cancelPreview returned 0
Don't know what any of it means.. if somone can let me know what I have to do to make the iChat vid to work let me know. Thank you.

I have exactly the same problem! None of the above worked either. I have a logitech camera with iUSB installed which worked fine when I had 10.4.11, but after upgrading recently to 10.5.5 following a hard drive failure on my G5 imac and re-installing iUSBcam, all I get is that the camera is in use by another application! Again, as with the initial post, it works with photobooth and the logitech driver software fine.
I have seen on another post, that an "archive and install" from the original disk has solved the problem previously, but having just spent some considerable time re-building my system to where it was before the hard drive failed, I am a bit loathed to follow this route. Any ideas gratefully appreciated.

OFM 11.1.1.4 trying to write into jacob.dll, d2kwut60.dll and JNIsharedstubs.dll when these are being used by 10gAS

Hi All,
We are working on a 10g Application Server to Oracle Fusion Middleware upgrade project. We currently have more than one application in the 10gAS and the upgrade to OFM is being done one at a time. So, until all the applications gets upgraded to OFM, we will have few applications running on 10gAS and some on OFM. We access these applications through Citrix. The Citrix server has JRE 1.6.0_29 which is used by our 10gAS applications. This is the same JRE version that our future OFM apps will also be using. When we tried to test our OFM upgraded app in our development environment, we found that fusion is trying to update the above mentioned dll files. That said, I have two questions:
1. What is that Fusion is trying to wirte into these DLL files? Any idea?
2. Will Fusion changing these files have any impact on the applications that is running on 10GAS?
I would appreicate your response.
Thanks in Advance,
Prathap

These files are part of WEBUTIL and are downloaded to a client-location as configured in the webutil.cfg -file. If you use WEBUTIL in your 10G IAS, these files are also downloaded there. I guess that for 10G and 11G the dll's are different, but i can't tell you what happens when you have a 1=G and a 11G application running on one client at the same time. I'd suggest you try out a form which uses functionality where one of the dll's is used.

Firefox automatically crashes after 4 hours of use and only when a textbox is being used - problem now daily and getting worse

This has been going on for a few weeks and started of it's own accord. I have not recently installed any new plugins or scripts, and my PC is protected by two antivirus products and so my system (WinXP) is malware free.
I can browse firefox for up to 4 hours, and then it crashes. No matter what sites I am using, what I am doing or even if I'm at the PC... so long as there's a text box on the page then firefox will crash if the 4 hour time limit expires. I can be just about to save an hours worth of photo captions and lose all that work due to the crash, or can be in the middle of a background download but it'll still crash... daily.
I thought this was a plugin issue, as I have disabled all plugins for javascript handling, flashgot, etc, but still it crashes. (previously on startup Firefox would hang for 5 to 10 minutes and the system would "bing" at me if I tried to click on the firefox window... eventually a 'non responsive script' window would appear relating to a flashgot script). The crash used to go whereby suddenly the page would freeze for a few seconds, followed by a minute or two of safe working, then 2 minutes of freeze and 30 seconds of safe working, with the ratio of freeze-tim:working time working in 20 seconds increments until firefox crashed... now though there is no warning, the page freezes and then it's gone. I have updated firefox several times and still the problem persists. On a previous computer, Firefox degraded to the point where it froze for 4 minutes on any page with a Flash application... now on this computer it has degraded by itself to the point where it crashes after 4 hours of use.
I'm presently using Internet Explorer to type this question because firefox crashed again and I'm not going to sit waiting for it to reload just to get a few numbers from an information screen... therefore further info like crash ID's etc will be update in due time....

Cool, I'll try using the wall adaptor just as soon as I get a convertor for it to convert it to our socket type. It's nice to hear that someone else has experienced the same issue.
I am not using it as a phone in Australia, just the ipod and wifi.

The streaming video freeze down very frequently,e.g youtube videos.

I can not watch a streaming video uninterruptedly. It freezes down very frequently for 10-20 seconds and then again starts working.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

HELP! Video Freezes One Second before the end of the Clip!

I just started using iMovie about a month ago. So far so good.
All of sudden, whenever I put two clips together or edit out a section of a video, the end of the first clip always freezes for about 1 second and then goes on to the next clip.
Sometimes, one or two frames from the excised clip will pop up really fast between the two clips. When I try to edit the two frames out, it starts freezing the end of the first clip.
I've seen this asked a time or two on the forum but got no response.
Please help!

You should try trashing iMovie's preference file:
Close iMovie. Go YourUserName/Library/Preferences/com.apple.imovie.plist
Drag this plist file to the trash. Don't worry. iMovie will create a new fresh one when you reopen it.
Open iMovie. See if the problem with the clips has resolved.
Note: if you also have iMovie 8 on your computer, the plist for it will call it imovie7, so be sure to trash the appropriate file.

Problem Mac mini G4 with Panasonic 52" Plasma using s-video (composite)

I am upgrading my mac mini but until then I'd like to watch some movies on my new Panasonic 50" Plasma (TH50PZ80U). The first I connected them together using a DVI-to S-Video adapter it worked but with low resolution (can't remember). The resolution was fine for movies but not reading. When I tried to increase the resolution the screen became all grey and black (like when there's no the TV channel in the old days). I tried all of the following but nothing has worked:
1) Played with the mouse for an hour to try to change the resolution but kept starting new programs instead
2) Connected to my apple display cinema, change resolution to the minimum, and then reconnected it and nothing
3) Asked a friend to bring his laptop to do screen sharing but my OS 10.4.11 doesn't support this functionality
4) Tried starting in safe mode and it won't start in safe mode. It gets stock on the gray apple screen at launch
5) Tried getting an HDMI cable but this mac mini is not strong enough for the plasma screen. It kept going black after a few minutes
6) Tried using keyword shortcuts with SwitchResX but I couldn't seem to find the right sequence.
Remember that I tried to the above blind since the screen was all blurry.
Can someone help. Thanks

+I tried with an HDMI cble, through a DVI adapter, but it seems that my 1st generation mac mini is not powerful enough for that. It comes out at first but as soon as I start any application, it looses signal+
I'll ask again; what happens if you try starting in Safe mode connected by HDMI? I understand that with a normal start and running 1080p, the mini is not necessarily stable. But if you start safe, or start normally, and quickly change the resolution to something lower than 1080p, the mini should be "powerful enough" to run the Panasonic at 720p for example. That should not present a problem.
If you really just want to get back to using the S-Video interface at 640 x 480, you should be able to throw out the display preference files to get back to a clean start. That usually works. Try the following; in /Library/Preferences find the file com.apple.windowserver.plist and throw it in the trash or drag it to the desktop. Find also in /Users/yourusername/Library/Preferences/ByHost the file com.apple.windowserver.xxxxxxxx.plist where xxxxxxx is a string of letters and numbers and yourusername is the name on the main user account and throw that in the trash, too (or drag it to the Desktop). Then restart and see if function returns to S-Video when connected to the Panasonic.

HT1349 I had to uninstall and reinstall iTunes due to not being able to access it at all. I had had to do this once before (yrs ago) and it recovered my music. This time it didn't. I could import ONLY what was currently on my iPhone, but lost all else.

I had to uninstall and re-install iTunes on my PC (Windows XP). I had had to do this previously (yrs ago) and it recovered my music. This time it didn't and I only have the music that I had checked (which was on my iPhone 4S). None of the other songs were recovered (MANY). Any advice on how to restore? I know I can store it to iCloud (NOW). But it wasn't saved in iCloud previously. Thanks!

It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

Keyboard and trackpad freeze if I don't use them for 11 seconds

If I stop using input (either with the built-in keyboard or trackpad) for 11-12 seconds (it's consistent), I'm locked out of using the keyboard or trackpad for anywhere between 4 and 60 seconds. The computer continues to function normally (if a movie is playing, for instance, the movie continues un-interrupted).
I've reset PRAM, and disabled as much software as I could.
I left the macbook pro off all night last night, and the situation *may* have resolved itself. I thought it'd be good to ask here, in case it happens again.
Thanks!
Leopard: 10.5.8
2.4 GHz Intel Core Duo
All software up-to-date

I found a little more information here: http://lars-schenk.com/frozen-keyboard-and-touchpad-on-apple-macbook-pro/238

Why is the Video Filter "Shift Fields" Automatically being added to my clips?

In the timeline, I've been noticing that FCP is randomly adding the "Shift Field" video filter to about 75% of all my clips in the timeline.
Is this common?
JS

Rienk wrote:
I noticed that this Shift Field filter is going crazy if you copy footage from a sequence to another with different Field orders.
I don't think in my case FCP has ever wrongly applied the filter when I just was editing from the Viewer to the Canvas. Only when copying footage from sequence to sequence, I discoverd problems.
By the way. You can select all the 'faulty' clips and choose Conform to Sequence from the menu, and al should be right...
Rienk
Good points, all. Thanks for your contribution, Rienk.
"Conform to Sequence" is a function I have never used, did not know it even existed, thanks for that, too.
bogiesan

Moving and copying events and projects to an external hard drive using Imovie09-Source clip is missing

Some background on what I am doing is importing all of my home video into an event in IMovie. Since DVD's can only hold about 2 hours of footage, I am making a new project for each 2 hours so I can burn the footage onto a DVD. I want to make space on my internal hard drive so I am trying to move the projects that are completed to an external drive. Because I also don't want to lose any footage I have imported into the event I am also copying the home video event to the external drive. (didn't want to move it yet until I know what i am doing, just in case it is lost somehow).
I tried moving a project to the external drive (it was a slideshow for my daughters first birthday which contained photos and video clips from the event that was already copied to the external drive). The project did move to the external hard drive but on the video clips there is a yellow triangle that says source clip is missing. I am moving and copying from within Imovie and NOT the finder so I don't understand why it says the clip is missing when it is definitely a part of the event that is already on the external drive.
What is interesting is the source clip is missing error showed on the first birthday project but it did NOT show as an error when I moved the 2 hour home video project. (All of the video in these projects are coming from the same home video event)
I am trying to make sure that when I move the projects permanently off the internal hard drive and onto the external drive, that I am not losing any part of my projects. I want to be able to easily move them back and forth if needed without any missing files.
Any suggestions as to why I am still receiving the yellow triangle?

As I can't see what you are doing, I can't tell you what you might be doing wrong.
You could try trashing the preferences.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Playback problems and video freezes due to plugins being used on video clips?

Similar Messages

Maybe you are looking for