Playback problems on one single project

I'm having problems getting a project to playback on my external monitor.
I just tested another project and it played back fine, so it must be the project. Ack!
Any suggestions?

You won't get many suggestions unless you provide some better information. People shouldn't be expected to spend time guessing.
What version of FCP?
What type of external monitor?
What codec are you editing with?
What is the difference between the two projects... sequence settings etc.
How are you getting to the monitor?
Any I/O device or card being used?
And anything else that might be relevant.
rh

Similar Messages

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

JDBC communication stopped if problem with one single JDBC interface

Hello,
Can you please explain this phrase
"JDBC communication stopped if problem with one single JDBC interface"
THanks,
Soorya

If you are having a problem with a JDBC interface (lets consider this to be a communication channel) then the communication is stopped (via that channel) (only in the case of EOIO).
Hope this clarifies.
Cheers,
Sarath
Award if helpful.

Problem with ONE SINGLE site with WRT610N

Hello,
First, sorry for my very poor English
I have a Linksys WRT610N with firmware 1.00.03 B15 (latest I think)
Last three days I have trouble connecting to a single website. This site is www.bdgest.com
I can access all other sites I want, but that one is very difficult to access, very slow with timeouts and error 404 messages.
When I connect to my modem with a cable, everything is OK. If I connect with a cable or wifi to the Linksys router, the access is weak. The problem is not my PC because I have the same problem with my I-Pod touch.
I don't made any change to the Linksys configuration.
Can somebody help me ?

I found another site that goes weak. www.enviedeseduire.fr
The TRACERT informations for both sites are VERY interresting :
tracert enviedeseduire.fr
Détermination de l'itinéraire vers enviedeseduire.fr [91.121.76.160] avec un maximum de 30 sauts :
1 8 ms 1 ms 1 ms 172.16.1.1
2 14 ms 24 ms 15 ms 10.89.128.1
3 13 ms 8 ms 11 ms 78.129.127.113
4 17 ms 17 ms 12 ms 212.68.211.2
5 16 ms 16 ms 16 ms 212.68.211.29
6 36 ms 14 ms 22 ms 212.68.211.133
7 14 ms 11 ms 15 ms 195.219.227.5
8 14 ms 19 ms 13 ms 195.219.227.14
9 20 ms 20 ms 16 ms if-10-1-1-0.tcore1.PVU-Paris.as6453.net [80.231.153.69]
10 21 ms * 27 ms th2-5-6k.fr.eu [213.186.32.245]
11 * * * Délai d'attente de la demande dépassé.
12 29 ms 29 ms 105 ms rbx-g1-a9.fr.eu [91.121.215.133]
13 111 ms 22 ms * rbx-2-6k.fr.eu [213.186.32.234]
14 * * * Délai d'attente de la demande dépassé.
15 23 ms 24 ms 22 ms ns25848.ovh.net [91.121.76.160]
Itinéraire déterminé.
tracert bdgest.com
Détermination de l'itinéraire vers bdgest.com [87.98.152.92] avec un maximum de 30 sauts :
1 7 ms 1 ms 1 ms 172.16.1.1
2 11 ms 9 ms 11 ms 10.89.128.1
3 10 ms 12 ms 8 ms 78.129.127.113
4 18 ms 17 ms 17 ms 212.68.211.2
5 62 ms 9 ms 13 ms 212.68.211.29
6 19 ms 11 ms 17 ms 212.68.211.133
7 13 ms 16 ms 16 ms 195.219.227.5
8 91 ms 14 ms 15 ms 195.219.228.1
9 20 ms 21 ms 17 ms if-10-1-1-0.tcore1.PVU-Paris.as6453.net [80.231.153.69]
10 * * * Délai d'attente de la demande dépassé.
11 * * * Délai d'attente de la demande dépassé.
12 30 ms 29 ms 28 ms rbx-g2-a9.fr.eu [91.121.215.151]
13 38 ms 24 ms 24 ms rbx-s3-6k.fr.eu [213.186.32.166]
14 22 ms 30 ms 28 ms 87-98-152-92.ovh.net [87.98.152.92]
Itinéraire déterminé.
Everything goes wrong after both if-10-1-1-0.tcore1.PVU-Paris.as6453.net [80.231.153.69]
Any idea ?

IMovie 09: How to export one single project

When I export as an mp4 or m4v, it actually exports ALL my projects. While viewing, if I click on the back button, it will switch to another video project. Only in QT can I export one at a time. I want to distribute only the one project not my whole repertoire. How do I do this?

Here's what I would do....
1) Drag all 25 clips to one sequence (5-10 seconds)
2) Right click on each clip, one at a time, and choose Nest (2-3 minutes)
3) Double-click on the first clip, which will open it's nested sequence on the timeline. Go to File>Export, then choose all your export settings and file-save location. Now click on Queue to start Adobe Media Encoder. After beginnig the export of the first clip, the export settings will remain the same for any clips you export after it, until you change the export settings again.
4) Repeat Step 3 for each remaining clip, excepting that you will not need to do export settings and file-save location again.
Total time: 15-20 minutes. Rendering time will vary.

Material for a single project spread across different locations

Dear Friends
my client is executinig trun key projects. One single project may be spread across different geographical locations. Say Project name is "PRJ001".
PRJ001 will be executed in Bombay, Hyderabad, Chennai.
There are 2 scenarios for procuring materail:
1. Since my these places are quite far away, I might procure material from a venodr near to these locations.
2. I might give PO to one single vendor to dispatch material to these different locations for project execution.
In the both the cases, how to handle material?
What will be best option? Should I create a storage location (my client stores material @ site as these projects run for years)?
I'm procurial material as Project Stock (Q).
Say Bomaby location needs 500 no. of material, Hyderabad location needs 700 no. of material, Chennai location needs 300 no. of material.
Now how do I ensure that the right material with right quantity is reaching respective project site?
In some cases, project runs in remote location. Where there won't be any connectivity/ access to system. In such cases, if the site engineer enters GR/ IR & activity confirmation in excel sheet & later on sends an e-mail with this excel sheet to the office. How can we upload it to the system so that it updates the required fields in the system?
Please give your suggestions.
I appreciate your support/suggestion .
Thanks

Hi Amaresh,
I think your Option no. 01 holds good for your requirement. You can define the corresponding Project sites in Chennai, Mumbai and other places as Storage locations. Better define Seperate storage locations for different site locations.
I think having a delivery schedule with the specific requirement quantities and the storage location should resolve your issue of handling different quantities for the same material. This you can discuss & sort it out with your MM consultant.
Hope this gives some idea.
Regards,
L.Balachandar

How can I combine three completed projects with text & sound to make one single movie?

How can I combine three completed imovie 09 projects (They all have text & sound) to make one single movie? Thank you for any help you can give.

If they are three separate projects than you will have to export all three as video files. Then you can reimport them into a new event, join them together as if they are ordinary clips, and export that.

Multiple Web Services in one Jdeveloper project

Hi all,
I'm currently trying to implement a series of web services, all relating to one application. I'm using the top-down approach, where I generate the web service from a WSDL file, and add my implementation to the generated classes. The WSDL file imports all sorts of XML Schemas (xsd-files) and Jdeveloper correctly generates all the necessary java-classes for me. Lets call the first web service I create WS-1.
This all works fine and I'm a happy panda. I can call the web service, it works, I can modif the wsdl and regenerate the web service to e.g. change the input etc. All this works.
Just until the point where I want to create a second web service (lets call this WS-2). This new web service doesn't use all the XML Schemas that the first web service does, it is more simple with regards to in-/output. The problem arises when I modify WS-2 and Jdeveloper regenerates the Web service files (.java and the files in the WEB-INF/wsdl-directory). When I do this, it deletes the imported xsd-files that WS-1 uses (removes them from WEB-INF/wsdl).
And when I regenerate WS-1 to get my xsd-files in again, then when I regenerate WS-2 it imports all the unnecessary xsd-files into the wsdl for WS-2.
Something tells me, that there is a connection or shared library between all web services in one Jdeveloper project. That they all imports and uses the xsd-files in WEB-INF/wsdl.
Is this true? Can't I have multiple web services (and wsdl-files) using different types (schema definitions) in the the same Jdeveloper project?
One solution I can think of, is to have all my web services in different projects under the same application. But is this really necessary?
I'm using Jdeveloper 10.1.3.3.0.

Hi,
pure from a coder instinct I think I would prefer them to be in separate projects for better reuse and clean separation. If I need project 1 to access aclass from Project 2, I can check the dependency check box in the project properties. Is there any business requirement that makes you think having all of these in a single project will help ?
Frank
Btw.: I agree that JDeveloper shouldn't constraint developers from doing what they want and if this is a limitation the feel free to file a bug

Multiple Agreement for Single Project

Hi All,
In our Implementation client generally gets multiple agreements for a single project. How to specify the Agreement Reference when we are creating an Event for billing? By the way have set up the funding option at the Project Level.
Thanks in Advance
Saptarshi

Hi
The problem you are raising has no solution by standard functionality.
Oracle promised to solve that for the first time in release 12.1 that should be available during 2009.
There could be customized solution which involve several parts:
Add a DFF on the event, so user can enter the agreement number.
Guide the user to run the GDI process for range of projects with the parameters - project number and agreement number
Develop a billing extension called on pre-processing of the GDI and another one called on the post processing step of the GDI.
The pre-process billing extension will put all project events that are not of the requested agreement on Hold, and any different agreement should also be "put aside in a non billable situation". The post process billing extension will release the hold from the events, and return the agreements to "normal".
I can admit such customization is ugly and risky. However, we have done it and it is working for us on production for several years. I have presented a paper regarding that on Collaborate 2007. You may look for the paper called: "Is it possible to invoice by contract using Projects Billing", on the OAUG web site.
Dina

No Playback on videos in the Project (PE9)

Hello
I need some help with a serious problem. I have been having some problems with Adobe Premiere Elements 9 for a while. Whenever I go to playback a video in the project the video won't play, but the audio will. This goes for what is in the timeline and the actual videos (not in the timeline) when trying to replay them in the program. Also whenever I move the marker (the thing that represents where you are in a video) if the video changes it is extremley choppy. Please help. I am running a Compaq Presario CQ56 Notebook PC with an Intel(P) Celeron(R) CPU 900 @ 2.20 GHz. I have 2.00 GB of Installed memory (RAM). I am running Windows 7 Home Premium. My system type is 64-bit. Please help.

1st, you need lots more memory... 2Gig is BARELY enough to load Win7 64bit... with nothing left over for programs
2nd, a notebook will usually have only one 5400rpm hard drive... you need a 2nd 7200rpm hard drive for all of your video files (see below)
3rd, depending on the type of file you are trying to edit, you may simply not be able to edit at all with a Celeron
4th, what is the type of video graphics adapter, and what is the driver version?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286

CS6 Playback problems with more then 3 Video Layers

I am having problems playing back a project with more then 3 HD video-layers (PIP and MultiCam).
After one second playback of video stops and I can only hear audio.
The same projecet in CS5.5 can be played with 8 !!!! active HD video layers without problems ...
Must have something to do with disk IO - I can play 9 HD streams with multicam if I use the same video on all 9 layers (each with a few frames offset)
I920,18GB RAM,GTX 680,9TB Raid5
regards
michael

Hi Jeff,
I allready deleted the cache and db files - even shift&alt startup didn´t change anything.
yes - MPE is enabled for the new CS6 project ;-)
In CS6 I can playback 9 HD streams with 3way-cc in multicam mode - as long as its the same clip 9 times - each with a few frames offset
as soon as I change the offset for each video to 30sec, playback gets choppy after 1 or 2 seconds and after 2-4 seconds it only shows 1 frame every 1 or 2 seconds (or stopps)
... tested with canon-hdv, canon-dslr and gopro2 material - no difference
Right now I cant even play 2 video streams in CS6 while CS5.5 still works with all 8 layers ....
regards michael

Burn multiple video files to one single DVD

I am converting a ton of old home videos to digital format, and I want to store them on DVDs. I'm using Elgato Video Capture to connect my VCR to my Mac which works fine for creating mp4s. I can then "right-click" on the mp4 file name in Finder and one of the options is "Burn [filename] to Disc". This is fine. But my problem is that many of these videos are fairly short clips and I don't want to use one single DVD for each one.
Does anyone know any way that I can burn multiple mp4 files onto one single DVD? Whenever I go to burn one of them to Disc, it seems to want a blank disc each time.
I suspect there is software out there that I could purchase, but I was hoping not to spend much money on this project. Any way of doing this in the standard Mac software? Or maybe a not too expensive DVD burner software I could buy which would allow this?
Thanks!

Click here and follow the instructions.
(92775)

IOS Music Player MP3 Gapless Playback Problem

Hi,
I've been having this gapless playback issue on iOS now for the past few years, since at least iOS 6 if I can remember correctly. The number one reason I use an iPhone and iOS devices is for gapless playback in the iOS music player. For the last few years I've been experiencing a bug with the stock iOS music player on my iPhone 4S using iOS 6 and on my iPhone 5 using iOS 6 & 7, and currently on my new iPhone 6 running iOS 8.1.2. This only happens on my iPhones and using iOS, this bug is not found when I use my iPod classic or when playing the same albums through iTunes.
I thought it might have been spotted by other iOS users and fixed in iOS 7.1 or at least the current version of iOS 8, but instead it's gotten worse, albums that used to play smoothly between transitions now suddenly pause and jump for a split second when changing from track to track.
What's happening is, I listen to a lot of albums that are continuously DJ mixed and play straight through without any pauses between tracks, and I've been experiencing problems a lot now with random split second pauses between tracks and choppy transitions. These albums in question have been ripped from cd using the latest versions of iTunes.
For example,
I'd be listening to an album and it would play gapless and smooth for most of the album, but maybe one or two transitions on the album would have a split second pause between them, and the rest of the album would play perfectly with no pauses, skips or jumps at all.
This only happens on my iPhone, as I have a 160gb iPod classic and I've listened to all the same albums on it and never has a problem playing the album without any pauses, every album plays 100% smooth and gapless on it.
I mailed Apple about it through their feedback page on their site... https://www.apple.com/feedback/iphone.html
Hoping that they would take note of this and try and look into it and fix the issue. That was probably about a year ago now, never got fixed or got any confirmation back from them about this problem. Then last August, I'd had enough and contacted Apple support to notify them about this issue. They told me the usual story, "have you tried restoring the phone?", which I obliged and did. The problem was there on a freshly restored iPhone 5.
So they told me that they would put me in touch with someone higher in Apple to take the case further, "great" I thought.
I spoke with a senior care advisor and explained the problem and agreed to send detailed explanations of the issue and test files too so that they could hopefully hear what I was talking about. But after a few weeks of going back and forward, I finally got them to hear the issue with the random pauses, the first week they denied there was a problem and said the files played ok on their test iOS devices, so I myself tried the files on another iOS device and the same problem was there.
The last correspondence I had with the Apple care advisor was back in the end of August / start of September, and she told me that they spotted the issue and was told by the tech's that it would be fixed in a future update, I never got a when this would happen, I was just told to make sure my iOS device was up to date with the latest version of iOS. I couldn't speak to an actual technician, got no follow up support, just a vague "We'll look into it." Case Closed.
I got so sick of this problem that I sold my iPhone and iPad just after this last phone call with the Apple people, and switched over to Android. I'd being reading up on gapless playback music players and found out that there's a good few available for Android devices. I got myself a Sony Xperia Z3 Compact, twice as powerful as the iPhone 6 and half the price. I was using that for the last few months, and playing my music through Neutron Music Player app which is a great music player which plays gapless 100%
But I couldn't really take to Android OS, seeing as I've been using Apple products for around 10 years now and iOS since the iPhone 3G. So I decided to contact Apple again and see if they'd fixed the music player issue in iOS yet.
I wrote a long email explaining the problem, how it wasn't really looked at properly, and how I was a long time Apple customer and had to resort to switching over to Android because the basic music player functions on iOS devices have bugs. I took a chance in mailing this to Tim Cook's offices, I knew he wouldn't reply personally, just thought that it might get read by someone in his offices with a bit more say in the matter.
Just before Xmas, I got a call from someone from executive relations from my local Apple offices about this. He seemed nice and was aware of the problem from reading back through my emails and previous case notes from August when I opened this case originally.
We had a talk and he said he would get one of the tech's to call me too about this so that I could explain the bugs to someone more knowledgeable about iOS.
A few days later I received a call from one of the tech's at Apple and was chatting to him, explaining the problem. His response was that he thinks Apple doesn't support gapless playback on current iOS devices. From looking at the gapless playback information page on the Apple support site below, it looks like it hasn't been updated to show any iPhone models after the iPhone 3GS... http://support.apple.com/en-ie/HT201644
I was trying to explain to him how ridiculous this sounded, why would Apple stop supporting basic functions on their music player on iOS devices? It makes no sense at all? You can see that the amount of hardware devices and software that supports gapless playback today... http://en.wikipedia.org/wiki/Gapless_playback#Player_support
He couldn't explain either, he just said that because it's not listed there on the Apple support page.
Then the next day I got the follow up call from the Apple executive relations guy, he was stating that he was speaking to the tech guy that called me and it looks like Apple doesn't support gapless playback anymore, from looking at the documentation on site.
I told him how stupid this was, and how lots of music players have gapless playback as standard today. And if they don't support it now, then why does it play through some parts of the albums on iOS ok and then just randomly pause, or have jumpy / choppy transitions on the rest of the album. If it was the case, no albums would play gaplessly at all, it would be like when the first ever iPod's were released back in the day with no gapless playback and would pause for a split second between every transition.
He couldn't give me an answer and said that maybe down the line they would start supporting it again, and that I should request the feature to be added to future iOS versions via the iPhone feedback page... https://www.apple.com/feedback/iphone.html
He just kept on emphasising that it was "NOT A BUG OR ISSUE", trying to cover up the problem because the info on the site wasn't updated to show the current iOS devices. Which in itself is wrong, looking at the page it says "Supported iPod and iPhone models (make sure you have the latest iPod or iPhone software)"
iPhone, iPhone 3G, iPhone 3GS only go up to iOS 6, so that contradicts itself when the latest version is iOS 8.
The info is out of date and needs to be updated. So in August I was told, "we found the issue and will look into it" and a few months later, "it's not an issue", what's a cop out.
I was annoyed and taken back by this response, and really found it hard to believe that this was the case, Apple stopping supporting their music player on iOS devices. Seeing as iTunes plays everything smoothly and no gapless issues. I just went out and bought an iPhone 6 for €900 / $1060, and for that money you'd expect it's basic music player to work. It's total BS to think that a top computer software / hardware company would just decide to abandon basic functions in their devices, especially when we are talking about how much Apple takes pride in their products and how much more they charge for them over their competitors.
So this is my next step to try and get this problem seen and out in the open more. The more people who know about it and are aware of the issue, the better.
Hopefully more people can get the word around and get this noticed by Apple and finally fixed.
I've uploaded some test files below to show the problem. The files are mp3's and aac, and have been ripped from cd using the latest version of iTunes. The mp3's are the ones with the issue, but the aac play with no problem. If you listen to the transition at the end of track 2 (2-02 Colours (JH Re-Edit)) going into the start of track 3 (2-03 Your Body), you will notice the split second pause / jump. But listen to the aac version and compare it to the mp3 version and you will hear that it plays back fine, just as it's supposed to. Try them in iTunes too and both versions playback fine, no jumps or pauses.
You can download them here, all links have the same files, I just uploaded them to different hosts for other people's choosing...
http://s000.tinyupload.com/index.php?file_id=86512332626247919914
https://www.mediafire.com/?w5wvi50er96b14s
http://www42.zippyshare.com/v/37047710/file.html
https://www.sendspace.com/file/lubcmc
More files can be provided if needed to show the problem happening on various other albums.
I really hope that people can spot this issue too and help get this fixed, I know this gapless playback feature might not be important to some people, but like I said at the start, it's an essential function for me in a music player and I use it on a daily basis when I listen to music.
Thanks for reading this long rant of mine, appreciate it.
Ger

I believe this issue occurs only between songs that iTunes has converted to a lower bitrate for you during transfer to your iOS device and songs that it has not done this for. Take this Between the Buried and Me album, for instance. I have marked all of the transitions that should have been gapless but probably aren't in red. I know for sure that most of these marked transitions are indeed broken and that the most of the transitions not marked in red work flawlessly... I honestly can't remember whether or not some of these transitions were gapless or not, but the many transitions I do remember working or not working match up exactly with whether or not the songs on either side of the transition were also on other sides of the 256kbps threshold, the threshold at which I enabled iTunes to convert tracks to 256kbps AAC.
I'm going to try re-sync'ing my library with that "feature" disabled and see if it fixes my gapless playback problem. Will post the results once I test it out.

Can I create one single crystal report using 2 bex queries

HI all,
I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries and develope one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
Only problem is client is particular about one single report(either crystal or webi)
if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
Please let me know if I can link OLAp universes and go for 1 single webi report.
Any help is appreciated.
Thanks in advance,
Mahathi

You can use either CR or WebI.
In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
Regards,
Stratos
PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query?

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Playback problems on one single project

Similar Messages

Maybe you are looking for