Playback question on the touch

I have a 2nd generation with the most recent OS, for some backgroud info.
I want to know if there is a way to play back a whole artist in the order of the albums. Whan I choose play all songs on the Artist It's in alphabetical order. I dont want this and wonder if theres a way to change this.
Thanks

only by creating a playlist with the songs in album order

Similar Messages

A few questions about the Touch

Hi,
1. I use a router with WPA2-PSK security. I'm assuming the Touch supports WPA2 security, but exactly how safe is the Internet browser and email application? What about in a Wi-Fi hotspot, like Starbucks or Panera?
2. If the iPod will not be in use for about 6-10 hours, should I put it into sleep or totally power it down? What about if it's not in use for about 2 days?
3. If I should get a case and or screen protector, what would you recommend?
Thanks in advance.

RE: "One word of caution: you do get what you pay for at the lower end. I have seen some truly horrid cases from places like eBay over the years. I guess I shouldn't have expected too much from a $4 case including shipping."
Perhaps, perhaps not. I bought my silicon skin case (with screen protector) on eBay ($1.50 + $6 shipping from Hong Kong) in October '07 - mostly because at that time there were no cases available yet in the stores and I didn't want to scratch my new iPoT. Once cases became available I checked them out. The price range for what looks like the same silicon case - ranges from Belkin Silicone sleeve at $9.95 + $0.97 for shipping at Walmart.com up to around $25 in various stores. Spending $25 for a silicon skin case is silly. So I'm staying with my eBay bought case until something better comes out.
thx, gordo

Open question on lines TOUCHing or CONNECTing

posted as an open question/discussion:
the TOUCH mask for spatial operators between lines is both valid (among others) for
|
|
|--------------
|
Horizontal Line boundary intersecting with Vertical line interior
as
|
|
|__________
Horizontal Line boundary intersecting at Vertical line boundary
The question is:
could it be useful to have a specific operator distinction between the first and second situation, to distinguish those situation?
this could allow for quickly query/analyse lines that are CONNECTing excluding the first situation, using only sdo_relate with a CONNECT mask?
this means the following 9i element matrix cases (now all TOUCH) could be CONNECT:
10*0*1*11, allowing only 1 or both line boundaries intersecting at another line boundary(ies).
(I know an alternative is using sdo_relate with one of the spatial functions in the select clause.)

Luc,
Thanks.
I think that it would be a good idea. I am sure if I sat down and thought for a moment I would come up with a good business situation that it would help with.
My current client is a UK environment organisation and they capture certain environmental features as invidual lines which join together to make a feature. Within the Oracle table the component parts are stored in separate rows with attributes to piece them together. I am sure your proposal would help to provide another easy solution.
Ivan

HT201406 1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

Should I get the iPod Touch? (Also a question about the screen issue)

Hi,
I recently purchased the 8GB iPod Nano, and now i'm considering to add a $100 and get the iPod Touch 8GB. Would you guys recommend it?
Another question I had was that I heard about the iPod Touch having some Screen Issues, and read somewhere that if the Box has a picture of Macy Gray then its Bad. But I personally think the Macy Gray image is for the 8GB, and the other artist is for the 16GB.
Is there a 100% definite way for me to find out if it has a good screen or not?
Thanks in Advance!
Saeid.

Ok, I recommend the iPod Touch. 8GB is fine, and totally worth the $$.
The screen issue has been fixed by a firmware update, so as long as you update to the latest firmware, you should be in the clear.
I have a 16GB macy Gray and it is working perfectly so far (1 week of ownership)
However, you mentioned using your iPod in the rain. If you do so, the Touch is not for you! I would not want to get water even near it, because the technology could be very very sensitive to water. It was raining here the other day (in Los Angeles) and I was so scared to use the touch that I took my 8GB 3gen Nano with me instead. And I was still scared to use that.
You will have to take the touch out and look at it if you are going to operate it properly.
The good news:
you can make playlists on the go! That means you can, while it is still dry, set a nice playlist without connecting to your computer. But, if the volume needs to be adjusted, there is a shortcut that would take just a bit of memorization and careful skill. In your pocket, you can double tap the home button, and then the volume, pause and track forward/backward "buttons" pop up. If you can memorize their position and hit them right, the Touch can be operated in your pocket. But make sure your hands are dry!
So it's up to you. I think quality wise, the Touch has had most of its bugs worked out. The only things that will come in the future are additional features.
Good luck and I hope you get it.

I am from Germany. I have a Question to the iPod nano 1st gen replacement program: Can I upgrade to Ipod touch 8GB? The new Ipod nano Generation is too smal for my hands

I am from Germany. I have a Question to the iPod nano 1st gen replacement program: Can I upgrade to Ipod touch 8GB? The new Ipod nano Generation is too smal for my hands

Hello! Not a problem, because you will get a Ipod Nano 1st generation as a replacement, not a new / latest generation.

A few questions about the iPod Touch

Okay so I'm thinking about getting one of these because friends have recommended them and I have the money. First off I bought a 2nd gen ipod nano off ebay a couple of months ago but lost everything on my pc so I'll have to replace all of the songs before I can sync it. Does this happen with the ipod touch? Or are they actually stored on it? Also, what are the best features of the ipod touch over the nano? And is it really worth it? Another friend has an iphone and said I should touches are crap and I should get an iphone because they're so much better, but they cost like 3x more than touches. Why are iphones so much better? Help is appreciated.

vedderfan94 wrote:
First off I bought a 2nd gen ipod nano off ebay a couple of months ago but lost everything on my pc so I'll have to replace all of the songs before I can sync it. Does this happen with the ipod touch?
Does what happen?
Are you blaming the loss of files on your PC on the iPod? You should always backup your PC's files whether or not you have an iPod.
vedderfan94 wrote:
Or are they actually stored on it?
Of course the songs are actually stored on the iPod, how else would you be able to carry them around with you and play music?
vedderfan94 wrote:
Also, what are the best features of the ipod touch over the nano?
Touch screen and apps.
vedderfan94 wrote:
And is it really worth it?
Your call.
vedderfan94 wrote:
Another friend has an iphone and said I should touches are crap and I should get an iphone because they're so much better, but they cost like 3x more than touches. Why are iphones so much better?
The Touch does not contain a cell phone, camera, GPS, or compass but otherwise essentially the same as an iPhone and running the same O/S.

Some questions about the battery

I have a couple of questions about the battery in general.
Is it normal that my iPod Touch 4G charges very fast? It reaches 60% in only one hour and it's fully charged before it takes two hours. I know this is not bad but I'm just worried. How can I be sure if it's really loaded?
Is it normal that the battery is very quick empty when I'm gaming? For now I'm blaming this due to the quick charge.
Is it normal that for example my battery level is at 30% and when I put on standby or something or close a game, the battery starts rising for approx. 5% even 10% sometimes?
Those are my question, I hope they are clear enough. Thanks in advance.
Regards

1. The tech specs says:
Charging times: Fast charge in about 2 hours (80% capacity), full charge in about 4 hours
2. Heavy use like gaming drains the batery fater then other use. The tech specs say:
Video playback time: Up to 7 hours when fully charged
3.. Yes, the indicate capacity tends to rise after heary draining is stopped. The battery indicator is not that accurate is affected by temperature. Heavy use increases battery temperature and when it decreases battery temperature decreases.

The touch on my iphone 3gs does not work. the only time it works is when i slide it to turn it off. I've tried resetting it multiple times and it will still not work. I need help!

Hello, I've got a question about my Iphone 3gs. Well one day i woke up and i tried to slide to unlock my phone but the touch was unresponsive. So, i turned off my phone and back on, the unlock screen came back one and same problem happened. The only time the touch works is when I slide to turn off my phone. When people call me, i can't answer. When people text me, I can't answer. I do have the latest update for the phone. I've looked everywhere on the internet and have got no answers. I have dropped my phone a couple of times and it does have some cracks on the screen. Please help!

Your only chance besides getting it serviced would be setting it up as new device:
http://support.apple.com/kb/HT4137

How can I get the touching size from TouchPoint class

I built a WPF project
MainWindow.xaml:
<Window x:Class="TouchSize.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525" TouchMove="Window_TouchMove" WindowState="Maximized" TouchDown="Window_TouchMove">
<Grid>
<TextBox x:Name="TextBoxOutput" TextWrapping="Wrap" Text="TextBox" Padding="5" Margin="5" IsReadOnly="True" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto"/>
</Grid>
</Window>
MainWindow.xaml.cs:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
namespace TouchSize
/// <summary>
/// Interaction logic for MainWindow.xaml
/// </summary>
public partial class MainWindow : Window
public MainWindow()
InitializeComponent();
private void Window_TouchMove(object sender, TouchEventArgs e)
TouchPoint tp = e.TouchDevice.GetTouchPoint(this);
I got the TouchPoint while i touching the touch screen, and i want to get the size of the Touching point.
I tried tp.Size but is zero.
Thank you.

If the Size is always 0 in a TouchUp event handler, your touch screen hardware may be the issue. Appearantly some touch screens report sizes in a non-standard way and then you cannot really get the size of the TouchPoint. Please refer to the following
link for more information:
http://nuigroup.com/forums/viewthread/10979/#59933.
Please also remember to close your threads by marking all helpful posts as answer and then start a new thread if you have a new question.

Basic Questions on the Syncing Process

I have a couple of questions about the syncing process.
First - does the syncing take place through MobileMe and the so called “cloud” or does it take place through the physical connection of the Touch to the iMac via the USB cable? When I connect the Touch to the iMac, I have
sync Address Book contacts
and
sync iCal calendars checked in iTunes
and there’s a little message in the same iTunes window under Bookmarks which tells me that the bookmarks are being synced over the air via MobileMe. So is the following assumption correct on my part that
Address Book
iCal
are being synced via the physical USB connection while the Bookmarks are being synced over the WiFi connection?
And finally, if I have contacts - let’s call them 1, 2, 3, 4, 5 on the Touch and only 1, 2, 3 on the iMac
what happens with the syncing process? Do the contacts on the Touch get reduced to 1, 2, 3 or do those on the iMac expand to 1, 2, 3, 4, 5 ? The question I guess is what syncs to what? Do changes on the iMac transfer over to the Touch during syncing or does it work the other way too?
Thanks
John
Thanks
John

1) If you have it to sync via Mobileme, then it sync via Mobileme. If you do not, then it does not.
2) It syncs both ways.
http://manuals.info.apple.com/enUS/iPod_touch_3.0_UserGuide.pdf

How to get CLEAR photos on the Touch?

I love my iPod touch, but there's one thing that has always bothered my - photos sync'd through iPhoto-->iTunes are grainy and have bad color. Until now, I've been unable to prove this - but finally I've found a way to prove that it's not just in my head. So, I'm wondering if anyone knows a way to get clear photos on the Touch ... ?
First of all, after using the app "PhoneView" to download my sync'd pictures from my iPod BACK to my Mac, I've noticed that the resolutions are different for pictures, depending on whether their orientation is portrait or landscape. For portrait 4x6 images, the resolution is indeed 480x320. However, for landscape orientation, the resolution is consistently 640x426. I think it's kind of odd that iTunes would be sizing photos differently depending on their orientation ... I usually have my full-resolution pictures in iPhoto and sync those images through iTunes, but today I also tried manually resizing my pictures to 640x426 (landscape) and 480x320 (portrait) and then syncing them as a folder, rather than through iPhoto. The results were the same as doing it through iPhoto: disappointing. I've put together a sample, below:
!http://www.mavisxp.com/ipod/iTunes_compression.png!
and another example here.
As you can see, even the manually resized images are turning out horribly grainy. What's even more disappointing than the image quality, however, is the file size: my original JPG is 84KB, but the iTunes' "optimized" JPG is five times as large (456KB) with inaccurate color and awful grain to boot. I mean, it looks like someone dribbled a basketball all over a glossy print (seriously, that grain's pattern is an exact match with the grain on a basketball) ... Is it supposed to look like that?
+After examining the EXIF data for both pictures, I've noticed another oddity which explains the bad color at least - when iTunes 'optimizes' pictures for the iPod, it apparently assigns them your monitor's color profile! Was this just an oversight that has yet to be corrected? When I export my pictures from Lightroom to iPhoto, I always use the sRGB profile because it's the most standard profile to use when sharing pictures (posting online, emailing, etc) ... My iMac's color profile is a custom Spyder2Pro profile, but that profile is only accurate for THIS MONITOR - certainly not my iPod! Anyway, I've uploaded the original pictures if anyone is interested in checking them out - you can download them in a zip archive here.+
This is the second iPod I've noticed grainy pictures with, so I know it's not just defective hardware. So I guess my question is simple: does anyone know of ANY way to get clear photos sync'd with the iPod Touch or iPhone? I've poked through plists in iTunes.app and preferences, etc - but I haven't found anything. Any ideas?

Thanks for the reply, Duddo.
I guess you're right, Apple probably just wanted to simplify the syncing process and make it consistent for all users. And no, most users probably won't notice that awful grain and poor color reproduction.
That said, I think it's a real shame to waste the capabilities of the iPhone/Touch like this. Wasting storage space is asinine (increasing file size 5X when 'optimizing'?!) not only due to the limited storage space available in the first place, but also due to the fact that smaller files are quicker and easier to load and manipulate. Overwriting color profiles is just sloppy coding, an oversight - hopefully one they'll soon fix. But the biggest problem for me is that the pinch/zoom functionality is USELESS because if you zoom in at all, the grain is so blatantly obvious. I found an old discussion thread on another forum which mentions this problem, according to several posters there, the grain problem was introduced AFTER the iPhone launched (meaning it can likely be corrected in a firmware update or an iTunes update) ... You can check out that discussion here, if you're interested:
http://www.everythingicafe.com/forum/iphone/not-optimize-photos-8264.html
Anyway thanks again for your reply. I'll keep my eye on this thread and if I hear anything about this issue (or a workaround) I'll be sure to post it!

Is there an easy way to adjust the touch screen on an Image Class MF7480?

When we try to hit the System Monitor button, the Special Features button activates. It used to be that if you put your fingernail on the very bottom of the screen, you could activate the System Monitor button. It's a great printer, but this is frustrating.

Hi Brooks!
It sounds like cleaning the touch panel might resolve the issue. Try powering the MF7480 off and cleaning it with a clean, dry, soft cloth. Be sure to get around the edges of the System Monitor button. If the Special Features button still activates, the MF7480 will likely require service. Call us at 1-800-OK CANON (652-2666), Monday - Friday, 8 AM to 8PM ET. We can give you some service options from there.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Is there a way to check if the touch screen and display works whilst iPod is apart?

Hi,
I pulled my iPod Touch 4G apart up to the circuit board in order to pull out the headphone socket.
Before I pulled it apart, the screen was cracked but everything was perfectly visible and the touch function worked perfectly.
Because the screen was cracked, when I pulled the iPod apart, I obviously lost small chunks of the screen.
Now when I plug the two plugs from the LCD screen into the circuit board and put the iPod together without screws, it looks like this:
http://s251.photobucket.com/user/matt9210/media/2013-06-19014523_zps86e6bc6e.jpg .html
So I'm not sure whether buying a new screen is the answer, because I'm worried it will still have the same effect on the new screen.
Another question: The headphone socket wasn't working. I had to hold the earphones in order to get any sound, and knocking them would lose the sound. I checked with other earphones before opening the iPod, so it's a problem with the iPod. What do I do with the headphone socket to avoid this problem?
Also, is this good enough to replace the iPod screen? A lot cheaper than I thought, thought I'd check what the catch is.
http://www.ebay.co.uk/itm/New-LCD-Display-Screen-Digitizer-Assembly-7-Tools-for- iPod-Touch-4G-4th-Gen-UK-/290908549993?pt=UK_Replacement_Parts_Tools&hash=item43 bb803369

Hi,
I pulled my iPod Touch 4G apart up to the circuit board in order to pull out the headphone socket.
Before I pulled it apart, the screen was cracked but everything was perfectly visible and the touch function worked perfectly.
Because the screen was cracked, when I pulled the iPod apart, I obviously lost small chunks of the screen.
Now when I plug the two plugs from the LCD screen into the circuit board and put the iPod together without screws, it looks like this:
http://s251.photobucket.com/user/matt9210/media/2013-06-19014523_zps86e6bc6e.jpg .html
So I'm not sure whether buying a new screen is the answer, because I'm worried it will still have the same effect on the new screen.
Another question: The headphone socket wasn't working. I had to hold the earphones in order to get any sound, and knocking them would lose the sound. I checked with other earphones before opening the iPod, so it's a problem with the iPod. What do I do with the headphone socket to avoid this problem?
Also, is this good enough to replace the iPod screen? A lot cheaper than I thought, thought I'd check what the catch is.
http://www.ebay.co.uk/itm/New-LCD-Display-Screen-Digitizer-Assembly-7-Tools-for- iPod-Touch-4G-4th-Gen-UK-/290908549993?pt=UK_Replacement_Parts_Tools&hash=item43 bb803369

Thank youbfor optimizing the touch input for scrolling on my HP Slate 500, why wont the others do the horizontal scrolling feature enables?

After testing all other available browsers the past month I have arrived at the conclusion that the Firefox browser is the only one that enables touch input for scrolling. Trying to navigate pages without this function using IE, Opera, Safari & Chrome is just tedious. I'm using the Slate as it was intended, business functions especially day to day charting for my patients in an online system.
The larger tabs for opening new searches & sites. If Microsoft plans on making W8 truly touch enabled they need to take note of what FF has done here. The touch input is limited on W7 but you've succeeded where others have failed.
3 cheers for FF! I couldn't do my job and document patient progress w/o your intuitive design. Brendan S. - Latham, NY
I guess the question is why are the others not developing these key features for Windows based slates...are they ignorant or is FF that much further ahead.

After testing all other available browsers the past month I have arrived at the conclusion that the Firefox browser is the only one that enables touch input for scrolling. Trying to navigate pages without this function using IE, Opera, Safari & Chrome is just tedious. I'm using the Slate as it was intended, business functions especially day to day charting for my patients in an online system.
The larger tabs for opening new searches & sites. If Microsoft plans on making W8 truly touch enabled they need to take note of what FF has done here. The touch input is limited on W7 but you've succeeded where others have failed.
3 cheers for FF! I couldn't do my job and document patient progress w/o your intuitive design. Brendan S. - Latham, NY
I guess the question is why are the others not developing these key features for Windows based slates...are they ignorant or is FF that much further ahead.

Playback question on the touch

Similar Messages

Maybe you are looking for