Playback shows the beginning slide when selection is in the middle
Does anyone know why or how to change the playback timeline to stop showing the beginning slide when you let go from viewing a video recording ? Example. video record something go down to the time line, select the red playhead bar in the middle. you should be able to see the recording fine. then let go of the player head and it stops where you let go but shows the first slide. How are you to edit this? Why does it do this? Please help..
Thank you
Elle
Hi there
Let me put my psychic skills to the test. (Closing eyes here and saying hmmmmmmm)
You recorded the project using Full Motion Recording. (To confirm this, look at your Film Strip. You should see a video camera icon superimposed in the lower right corner of the slide thumbnail.)
Sorry, but that's not the mode we normally recommend for capturing. Yes, I know it's an option, but so is filling the back seat of your sedan with bags of concrete. Just because it's possible doesn't mean that in reality you should.
This is simply one of the issues you will have to deal with when working with this recording type. The only workaround is to scrub the playhead and observe, then position other elements as you desire. Rinse and repeat until placement works like you want.
Other than that, you may wish to consider switching to slide by slide recording mode. That's the mode where Captivate shines. Full motion isn't Captivate's forte.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks
Similar Messages
-
Is there anyone having an issue with the apple tv when selecting music from the home screen?
Is there anyone in the community having an issue playing music from the home screen of the apple tv? When selecting the music app my apple tv restarts. If anyone else is having the same issue and has corrected the problem please share the solution.
Working fine here, and have not seen any other reports. I would restore your unit
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?
Grateful pirate wrote:
Thanks but I think it's more of a setting thing.
Worked for years in 9 and know my the key commands. Just takes up lot of extra time. I know there must be a solution just can't find it myself.
Thanks again.
Oh, I see…….when I want something like this to happen I would just engage the >Go To Start< command (0 on the numeric keyboard in my case) and the play head will position at the beginning of a cycle area (if one is active of course)!
Hope this helps a bit…….. -
Report With Multiple Radio Button ,How to reset the values of when selected
Reaching out to the experts here. I have a report which i created a radio group which saves the value rownum when the radio buton is selected to a hidden item based on an on click event. There are currently 3 radio button , i need to be able to "reset" the value of the other items when more than of the button are selected .I.E. There are 3 buttons, user clicks button one , but then decides they need to click button two , then realizes they really wanted to perform button 3 , I want to be able to "reset" the value of the 1st two hidden items so the only value populated is the 3rd hidden item. I am new to working with these features and scenarios so any and help would be appreciated.
Here is the report
SELECT APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN1'').value=' || ROWNUM|| '"') UPDATE_RECORD
,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN2'').value=' || ROWNUM|| '"') DELETE_RECORD
,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN3'').value=' || ROWNUM|| '"') SET_PRIMARY
,papf.first_name
,papf.last_name
,hl.meaning
,pp.phone_number
,case when phone_type is not null then (select meaning from hr_lookups where lookup_type ='PHONE_TYPE' and pp.phone_type=lookup_code)
end as phone_type
,emrg.primary_contact_flag
from hr.per_all_people_f papf
,apps.hr_lookups hl
,apps.per_contact_relationships pcr
,apps.per_phones pp
,(select contact_person_id,primary_contact_flag
from apps.per_contact_relationships pcr
where pcr.person_id = :P5_PERSON_ID
and contact_type = 'EMRG') emrg
where pcr.contact_person_id in emrg.contact_person_id
and pcr.personal_flag='Y'
and contact_type <> 'EMRG'
and trunc(sysdate) between date_start and NVL(date_end,'31-DEC-4712')
and pcr.contact_type = hl.lookup_code
and hl.lookup_type='CONTACT'
and pcr.contact_person_id = papf.person_id
and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
and pcr.contact_person_id = pp.parent_id
and pp.phone_type in (select lookup_code from hr_lookups where lookup_type ='PHONE_TYPE')Related thread here How to Pass values from SQL Report into TEXT ITEM ?
Regards, -
I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.
If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again. -
I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
I got this phone a week ago and was able to put about 15 albums on it! Yesterday i went to add 10 more to my iphone 4s and all the albums show on the menu but when i click on the album tthe next sceen tells me i can buy this album at the apple store! All the albums are in my library i just cant get them back on my phone! And all the albums that were on my phone are also doing the same thing with the screen that says i can buy these from the apple store!
So after looking a bit closer i have noticed that when i have the phone plugged into the computer it shows the songs but when i dont have it plugged in and i go so the song icon on the bottom of the music menu screen it says i have no songs!
-
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
I've the iphone 4s, and My battery show me 40% than the phone shut down,some of my friends the same, from when i'll update the system os.
We've think that Apple do it for making the change of the phone!! :O
what will we have to do for making the downgrade of OS of the phone?
tks AndreaBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Apple has never supported downgrading of the iOS. -
By default, the 3d interface & dialog opens when the 3d option is selected. i forgot the question HA
by default, the 3d interface & dialog opens when the 3d option is selected. (ya know, the grid on the artboard; 3d tools...etc...) I must have checked the box for it to never appear, because it doesn't appear and I'm not skilled enough with CC to operate Photoshop without it. My question is how would i enable this manually?
I've noticed on FF29 that the "Save and Quit" "Quit" "Cancel" Option has disappeared. The normal changing of preferences in Firefox about:config below won't work.
Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Locate the preference browser.tabs.warnOnClose , if its value is set to false, double-click on it to change its value to true
Repeat this for these 3 preferences ''browser.warnOnQuit'', ''browser.warnOnRestart'' and '''browser.showQuitWarning''
To get the Save and Quit warning box back you have to Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Right click on an open space in the preferences settings field and select a new Boolean and enter ''browser.showQuitWarning'' and click on OK, then make sure that it's set to true -
By default, the 3d interface & dialog opens when the 3d option is selected. (ya know, the grid on th
by default, the 3d interface & dialog opens when the 3d option is selected. (ya know, the grid on the artboard; 3d tools...etc...) I must have checked the box for it to never appear, because it doesn't appear and I'm not skilled enough with CC to operate Photoshop without it.
I've noticed on FF29 that the "Save and Quit" "Quit" "Cancel" Option has disappeared. The normal changing of preferences in Firefox about:config below won't work.
Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Locate the preference browser.tabs.warnOnClose , if its value is set to false, double-click on it to change its value to true
Repeat this for these 3 preferences ''browser.warnOnQuit'', ''browser.warnOnRestart'' and '''browser.showQuitWarning''
To get the Save and Quit warning box back you have to Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Right click on an open space in the preferences settings field and select a new Boolean and enter ''browser.showQuitWarning'' and click on OK, then make sure that it's set to true -
I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas
You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan -
The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
The problem does not appear, if PH Elements 13 is executed in the administrator mode.
The available computer resources are rather large enough: CPU INTEL i7 4 cores, 16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
Please, advice how to solve this problem? Maybe, there is patch or updating available?Dear n_pane,
Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
I wish you all the best in the New Year 2015! -
Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense. -
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz
Maybe you are looking for
-
This did not happen on my laptop when I installed the Microsoft Office home & student edition, and my laptop also has Windows 7 and I use Firefox. Please help!
-
Issue with SSRS Loading Report from Definition From Assembly
I am using SharePoint 2010. I created web-part where there is report viewer control. On the page load of the control. I am writing below codes to load report from definition. Web part is not giving any error but also not lading report. I tried to mak
-
How to move ebooks from one account to another
I have some books bought on an old computer with an old email account. It seems that this adobe account doesn't exist anymore I have an new computer now and want to move the books to digital editions on this new computer. I haven a new adobe account
-
Contextual menu items remain after Bitcasa removal - why?
Hello there. I'm looking for a solution of Bitcasa context menu items that won't go away. After removing the app they still appear in the Finder context menus. I already searched the usual places like Keyboard Shortcuts, Services, etc. but couldn't f
-
Error - No update server found for context
Hi I'm trying to write a BSP page that sends E-mail via sap connect. I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work. When I try to send an E-mail, the program terminates with 500 SAP Internal Server Error Error messa