Playback speed doubles after render

Hey everyone, have this really weird issue. I have some clips I filmed at a conference recently. I put them into the time line and it gives me the spiel about changing the sequence to match the clip. I say yes. The clip plays back fine, until I render it, say with an effect or a title etc, then the clips doubles in speed.
The clips where all recorded through my Black Magic Card into FCP using ProRes.
Things I have tried to fix it with.
I have tried re-compressing the video files.
I have tried changing the render settings
I have tried exporting the video as a self contained video and also just straight from FCP to Compressor
But all with the same results. The file details look fine, but for some reason the play back doubles in speed.
Anyone have any thoughts on this? Cheers.

Actually just to add to that. I opened the original file in Quicktime 7 and it plays at double the speed too. I looked at the movie inspector and it says the frame rate is 25fps, but when I play it, the playback frame rate is 50?? How on earth do I fix that?

Similar Messages

Video playback speed in After Effects

           After importing QuickTime video into After Effects it plays back at about half (or even slower) the initial frame rate (13 fps or so instead of 29.97 fps). Also in the top right corner of the workspace (Info Panel) I'm getting a message that "...Layer 1 Retrieving Frame".
           Could you, please, give me an advise how to return video playback to normal speed?
           Thank you.
           Vasily

Eiss wrote:
          Sure, After Effects isn't a movie player. But it is possible to edit source footage in AE in order to make a coherent whole out of it, isn't it?
Technically possible, but not an ideal workflow. I can also cut through my filet mignon with a spoon, but I can do it a lot faster and with much less frustration if I use my steak knife.
I edit in Premiere and then use the Import>Adobe Premiere Pro Project option in After Effects to bring my edit into AE.

Very slow editing, playback sluggy even after render ...

I working on a movie, footage is mostly 1080p 50 fr. For the moment the movielenght on the timeline is only 8 minutes and editing is becoming so hard because of the slowness of some tasks...
I explain:
1) At start up loading this latest project is slow
2) Media asset pannel: thumbnails of footage is loading very slow when you go to another folder
3) Pre-viewing of (a part of) the footage already added to the timeline (expertmode) is sluggy, but sometimes even when pre-rendering with the renderbutton is done (the render markers are correct placed) !
Also a crash op PE sometimes happens (but not so frequent)
Final rendering to a format (dvd, mp4 etc) works well but ofcourse it's difficult to make a good movie if pre-viewing of the timelinefootage is not working well ...
So my question is if I replace my internal (ram) memory in my pc from 8 GB to 16 GB, would this fix all this 3 problems ?
I have only 2 memory banks, now with 2x4 gb so I would have to buy 2x8 that's more than 100 euro (more than PE itselfs thus ...).
My pc works well for a recent game like Far Cry 3 so I don't need the memory for other programs ... So I want to be shure if this will fix it.
Finally, my config: PC has a small ssd with win 7 home premium and PE 11 dutch, all other data on traditional HD, separate ghraphics card:
MEDION® AKOYA® PC P5368 E
bought in dec 2012
CPU-type
Intel Core i7 3770
ram
8GB
Geheugentype
DDR3
motherboardchipset
Intel H61
bus hd
SATA-600
Optische Drive Type
DVD+/-RW DL
Videochip
GeForce GTX 560
Opslagcapaciteit
64GB
Hardeschijftype
Solid State Disk
Opslagcap. tweede schijf
1,5TB
Hardeschijftype tweede schijf
7200rpm

John T Smith wrote:
What is the "normal way" is not what you need to do for Premiere Elements... the program will not ask you for your admin password, it will simply fail
This note is for a different program, but the steps are the same
Run as Administrator http://forums.adobe.com/thread/969395
That's almost the same as right-click and runas admin, the only difference is that you don't have to right-click. The problem with this solution I mentioned above already:
windows acts than like you are the admin and the admin documentsfolderlocations is the standard instead of yours folderlocations (so all your footage, pictures and all data you want to use in your project should be than in the admin documentsfolders instead of your own user folder ....
Than it's better to change the useraccountpermission in admin, that's what I did now. So I'm working with an account with full adminrights now. That's not very safe but I want to give it a try for the time of the project-in-use . I've updated also the graphic and audio drivers.
I've also disabled temporary AV.
All this didn't change anything for loading the thumbnails when you open a project. It still takes minutes to load and the first time after startup opening a subfolder in the assetspanel also takes again minutes (only the first time after startup, if you later go back in that subfolder thumbnails are showed almost directly).
Play-back of timeline seems almost ok now, but this was already yesterday the case (since the scratchlocations didn't change anymore)
In the manual I read that it is advised to defrag the scratchlocations from time to time. But win vista/7/8 have auto defrag ... ?

Playback speeds up intermittently on first scene when played after build

Hi
I have a problem with playback on apple dvd player after completing the build? When I play the authored project on apple dvd player after the build, after clicking on the play button in the main menu, the first scene (about 1 min. long) playback speeds up intermittently-normal speed then fast for a second then normal then fast-jumpy I guess might describe it. This only happens on the first scene with all the other scenes after this point in the timeline playing fine. I placed 2 new clips (different assets-scenes) to replace the first scene & the same issue happens with different asset clips being used in the same position (first) in the track timeline.
The scenes I used are pans of a running deer, which play fine anywhere else in the track timeline except the first position. When I play the project it's fine in simulator mode & in the project itself...this only happens after the build when playing on apple dvd player from VIDEO_TS folder. This is a test project for some footage so it's only 10 minutes long with bit rates at 5-6 ave. & 6-7.4 max.
-2 pass VBR-best motion.
Any ideas on what is going on?
I'm using DVDSP 2 with Jaguar 10.2.8.
Thanks for any help.
Della

Della:
Not a clue about the problem, sorry, but can "imagine" a workaround just to fool the problem.
You must have a PLAY button that connect to that first scene (first chapter in the track, I guess). If you connect that button to the second chapter (just to try) that plays fine or again behaves as it was first?
If that way plays fine, you can add a "false" first scene (i.e. one second of black exported from FCP) and connect the PLAY button to the real first (now second in the track) chapter.
I told you, it's just a workaround to have in hand in case your dead line gets close!!

Why do my quicktime movies playback at double speed? Please help

Hello all, this is my first post.
For some reason all of the sudden my quicktime movies that are 2 months old or older playback at double speed although the sound plays back as normal. Any movies that are less than 2 months old are ok. All these videos have been taken with my digital cam which records files in mov. Also any of these files which i convert to flash also play back 2 time faster when i select the converted swf file. Please help as i have hundreds of files which are affeceted. Any new clips i record playback fine.
Also I copied and pasted a problematic video on my wifes newer pc and the clip still has the same problem.
Thanks in adavance

I think I figured it out.. didn't see that you could choose what type when importing.

How can I slow down the playback speed of selected parts of a captivate video?

Hi everybody,
I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
Thanks!

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

File size extremely high for .avi after render PE 9

I'm very new to PE and have tried to learn quick to redact info (faces etc) in .avi files for a government agency. I was able to open the file (in the trial version) and make the track matte by dragging the original file to the timeline then dragging it again to the video 2 timeline for the top layer, Question 1) is this the same as copy and paste or am I doubling the size already? Anyway, I was able to get the matte and everything done. Now, to Render and save... I choose computer/avi again (I need to keep it the same) and it took 1 hr 45 min to render it, that seemed long to me but maybe not... but mainly the file size was then 100,883 kb! Starting with a 29.7 kb file. This is what my question is about....could this be right? I can't use it if this is what I get. So, here are the particulars as I got G-spot and looked it up, as per serveral suggestions I saw here. I'm trying to understand the CODEC info but I fear I have a ways to go before I can figure out what I did wrong. (This is my test computer, the future work would be done on a newer, better computer). The videos I would be working with come from various sources and will vary in length but will probably all be a kind of avi.
Intel Pentium processor 1600 mhz
221 mhz, 2.00 gb ram
Microsoft windows xp sp3
video:
length: 0:27.261
frms: 817
Kbps: 28770
pic: 720x480
codec: dvsd dvc/dy
I appreciate any help you can give

Thanks for you response and the information was very helpful. I was able to choose and output that gave me a good file size and I do want DV-AVI (I don't remember what I chose but it worked) but, I don't see an option for DV-AVI - is that a general DV output selection, because there seem to be numerous (AVCHD, NTSC, DV STANDARD) acronyms (I have tried to understand what each is) which do I want?
From: Bill Hunt <[email protected]>
To: Mid Century Modern <[email protected]>
Sent: Wednesday, September 28, 2011 6:07 PM
Subject: File size extremely high for .avi after render PE 9
Re: File size extremely high for .avi after render PE 9 created by Bill Hunt in Premiere Elements - View the full discussion
For the use of Track Matte Keying, with say a Gaussian Blur, or maybe Moasic Effect, if you have not altered the In & Out Points, then just dragging the Asset to both Video 1 and Video 2 will work fine. If you HAVE adjusted the In & Out Points, you can just click-drag from the Source Monitor, where you set those In & Out Points, and all is good. The Copy/Paste is just another way to do it.
As you are doing an "overlay," the output File Size will not be affected in any way. You are also limiting the Blur, or Effect on Video 2 to just the area "exposed" by the Track Matte, so the pixel count will not be altered.
As Steve points out, the output CODEC in the AVI will determine the output File Size. File Size is basically determined by the Timeline's Duration and by the Bit-Rate of the output file. With DV-AVI, that Bit-Rate is pretty well set, and your Timeline determines the Duration. At ~ 13GB/hour, a DV-AVI will be pretty large, but that is the nature of the beast. Also, and as Steve points out, if you are going to do additional editing, and will be Importing that file into a New Project, DV-AVI is about as good, as it gets.
Good luck,
Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3943683#3943683
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3943683#3943683. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Images that zoom and move jitter after render.

I have a bunch of pictures that I put to music. Some move across the screen or zoom slowly. The images move smoothly until I render them, then it's like the images are on some bumpy path or something. They jitter or bump as they move.
I have de-interlaced the images, have changed the image formats, added max flicker filter, ensured that my render settings were at 100%, have redone the motion, have doubled the resolution of the image file (just in case the pixels were conflicting or having trouble at that resolution), and have adjusted settings in the individual item's properties.
My project was supposed to be delivered to the customer yesterday, but there's no way I'm going to deliver a jittery video. The problem is also equally noticeable on the DVD I produced . I have never had this problem in the past. Like I say, when the render bar is green, everything is smooth. After render, bumpy motion. All the motion (for the most part) is perfectly horizontal or vertical.
Any input would be greatly appreciated.
Message was edited by: Joey Delli Gatti

I had the exact same problem and was able to overcome it using a hack... this seems to be a bug in FCE.
I fixed it by rotating all my original images 90 degrees, replacing them in the timeline, rotating them back, then applying the zoom effects. They look perfect now. (Strange but true.)
Anyone with a better solution to this issue?

Pixles/artifacts showing up after render?

Ok. so working on final cut 7. Cannon 5d footage, hootage is in H.264 (usaly edit in pro rez, but its happening with both formats)
Using magic bullet looks to get the grain and tilt shift look, looks good before i render, but as soon as i do render...well its looks like the image below. Any ideas?
before render...
after render
after render

Hi
Me just an amateur (FCP 6.0.6) thinking.
How did You set this - I do like this
Setting it to LOW and Quater - gives me a very bad playback - BUT it doesn't halt due to loss of frames.
Yours Bengt W

Canon HV10e and playback speed

After capturing in imovie from a Canon HV10e playback of the clips in imovie is slowed to about 80% of yhe original speed. After exporting to Quicktime the movie plays still too slow. Is it a bug in imovie?

That's the way the application works. When using HDV material you have to drive the camera or deck by hand. There is no FW control.

Jaggy Text after render in FCP

OK So I bring in my nice text animation that I did in Motion 2 into FCP 5. I park on it and it looks nice and clean. Then after I render it in FCP it looks jaggy as if the field order is reversed. So I went back into motion and to render out a field render with the animation codec. Place in the time line. Nice and sharp. Then after the render it gets jaggy and nasty. What am I not doing? Both Motion and FCP projects and DV 720 x 480 both are lower field. Both the Motion project and the animation QT look fine at first then jaggy after render.

The Spencer article. Be sure to match your field order, use a lossless codec, etc.
Yet this doesn't always solve the problem.
The answer is probably because FCP is just plain buggy.
The work around? Just go into Motion and change your project resolution... to anything that doesn't match the same screen res. Dumb huh? Just double the res, or reduce it by ONE PIXEL -- both seem to make the text SHARP.
Good luck!
Now tell me why the Motion text pops all over horizontally in preview mode but not not after it's rendered... (bugs.)

Quicktime 7 streaming playback speed problems.

Hello,
I am currently using QT 7.6.6 to stream asx/asf video files. As these files are lectures, I like to watch them between 1.5X and 2X. When I adjust the playback speed, the load speed stays the same. As a result, after less than a minute my playback stutters. Is there a way to have the stream load faster, so that I won't have to wait 20 minutes for enough of the file to load before I start my faster playback?
Thanks for all the help.

Having just updated my G4 with the new QuickTime 7.5.5, I can say that this fixed the problem I have been having- hoorah!
I appreciate the response from Sig, although I still can't seem to find the QT discussions page from the discussions home page on the Apple site, which is why I posted the problem on the Tiger page.

Slowing the Particle Speed in After Effects Particle World?

Hi folks, does anyone know if there is a way to slow down the line particle speed in after effects?
I've already tried the Velocity and Gravity but these affect the shape and projectory of the particles, I'd like to just slow down the speed?
Thanks

There are other particle systems that offer more control if you really need it. Expensive.
Build your main comp at a higher frame rate, render the movie, and bring it back into a 30fps comp. You can precompose and nest but the movie is generally easier to manage in your head. The highest frame rate I can use on my AE is 99fps. A more current version may offer higher frame rates.

HT3176 How can the slow motion playback speed be adjusted on Apple TV (pause and clicking right/left)?

I am looking to adjust the paused slow motion playback speed of Apple TV. On one of my Apple Tv's when paused I can click right or left to view tv in frame advance (or one second advance) on a different Apple TV there does not appear to be any advance even after multiple clicks. But, it will jump 10 seconds when paused and left or right is held down as it should.
Third gen. (A1427) Apple TV Software version on both 7.0.3

Unfortunately with that speed you are not going to have a good experience with HD streaming. I would make sure everything is set to stream SD. Go into the settings - iTunes Store and you can switch there for any purchases/rentals made through them.
If you use Netflix (or other streaming sites) go into your account(s) and see if you can switch to a lower quality stream. I know Netflix has that in place.

User control of the playback speed of an eLearning

Is there any way for the user to adjust the speed of an eLearning? T...he question has to do with accessibility requirements. If a user needs to slow down or up the playback speed similar to how you may adapt volume - can that be done in a Captivate project? Thanking you in advance!

Thanks! I totally agree.
We already use interactive objects to allow users to move forward at their own pace. Yet this was a specific request and I could not find anything supporting it in Captivate. Therefore I wanted to double-check with the community.

Playback speed doubles after render

Similar Messages

Maybe you are looking for