Playback stops and stalls

I'm using Encore 1.5 and just gave a client a slide show encoded from Premiere 1.5.1. The DVD played fine on my Panasonic player but the client reported problems with both DVDs he got. I tested on a different player (Sony) and sure enough, it would not play properly.
The DVDs play okay on my Panasonic and computer players but not on Sony and apparently others. I encoded the project at 7.5 mbps for better quality. Could that be the problem?
Need help soon, client getting married shortly...
Thanks,
Bob

To
Burn Error Proof DVDs (Well, close to error proof!)
Use the SLOWEST possible burn option your burner will allow in Encore, since it is much better to take a bit more time burning the disc than it is to burn "fast" and have a disc that won't play
Set the VIDEO portion of the transcoding options to a Maximum of 7,000 so your burned disc will have a better chance at playing in desktop players (which support burned discs, if at all, only as an "after thought" of the DVD specification)
Use AC3 or PCM audio transcode settings for best player compatibility (some discussion of MPEG audio not being supported by all players, especially for NTSC discs)
Buy and use Taiyo Yuden (or Verbatim?) brand blank discs
Read this
ENTIRE message
Concerning Replication
And this one
About Authoring and Playing a DVD
Discussion of
Peak Bitrate
Here is one
Bit Budget Calculator

Similar Messages

Netflix playback stops and dumps me back to app

I watch a lot of Netflix on my Apple TV (I binge watch) and once or twice while watching it, the streaming playback stops and I'm looking at the menu screen showing the first episode I've watched - if I'm more than one episode in. Sometimes I'm back to the Netflix main menu.
Has anyone experienced this? Is there a fix? I've watched Netflix on my PS3 and this never happened, could it be the Netflix app on the Apple TV or the Apple TV?

It's a 45mbps internet speed which right now is 50mbps - at least between my house and the closest server, can't speak for the internet speed for the intervening hops. Would help to know what part of the country Netlfix's servers are, then I can check speed between here and the actual servers (as close as possible). I never get buffering on the PS3, and Netflix loads a lot faster there. Haven't had this happen on my Roku either, which makes me think it's not necessarily the network.
I did try googling the problem and there were a lot of hits, mostly all saying 'network.'
I looked at my network settings to check the DNS setting and it's set to the ip address of my router. Where does it get that information, from the router itself? I have 2 wireless networks in the house which doesn't bother the PS3 but might not be good for the Apple TV. I have a Uverse router serving my tv and internet with a Time Capsule plugged in behind it via ethernet. I wasn't able to find anything good as far as advice for configuring the second wireless router other than to put it in bridge mode, which it is. It's not working quite as well as it did before - frequently it never loads videos embedded on facebook or on YouTube. It COULD be network, I wouldn't rule it out, but this is something that never happens with the PS3 or the Roku.

Video playback stops and starts

I've never had this problem before but since I wiped my 5th Gen (late 2006) iPod Video and put new content on it the video playback keeps freezing for a second and then continuing. Most of the time the audio keeps going but sometimes they both stop and start again. It's very annoying. I don't see anyone else in this forum complaining about this. Am I the only one?
Anybody have any suggestions on how to fix this?
-LT

What codec does your source footage use?
What codec is applied in Sequence > Settings?
Where are the source footage and render files located on your computer?
Version of FCS, Mac OS X and QuickTime?

Video playback stops and refuses to load.

I have F/F 27.0, Flash 12.0, and the WinVista OS. The modem lights also show no activity when this occurs.

You can check for problems with current Shockwave Flash plugin versions and try this:
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
See also:
*http://kb.mozillazine.org/Flash#Troubleshooting
You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Playback Stops... Why?

Hello - I am learning how to use Premiere CS4. One thing I noticed is that during playback, if I click on anything in Adobe, playback stops and I have to restart it. Is there a way to prevent this?
Thanks,
Roberto
www.robertocerini.com

I am learning how to use Premiere CS4.
You will also find links to many free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Stop and go playback in dual layer authoring

I have a 2 hr movie which came in at just over 7 Gig so I am using Memorex DVD+R DL disk to burn in Best performance mode. The burn went fine but when I watched the movie after the first hour the playback was stop and go. Any ideas ?? New G5 iMac in Sept. 05 iLife 05
Leslie

resolved

Videos stall when loading from youtube, facebook. Must stop and reload.

Videos stall after only a few seconds from FaceBook and YouTube. Must stop and reload.

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Easy Question! How Do I Play ONLY the Selection, and then playback stops?

How Do I Play ONLY the Selection, and then playback stops? (Same as subject..)
Thanks! I'm loving STP so far. I came from Sony Sound Forge so it's been difficult finding something that can compare, but I think I have it now! Lot's of advantages for STP too.

I think you're confusing the audio loops with MIDI loops. The blue loops are audio loops which will play only on audio tracks. You can't 'play' those with a keyboard because they are actual audio files. The green loops contain MIDI data that corresponds with a software instrument, and if you drop them onto a Software Instrument track, they will open that instrument which you CAN play with an external keyboard or the caps lock keyboard.
I might be missing some loops, but when I searched for Bell Tower I found only one, and it is a blue loop. So it can only be played as an audio loop on an audio track. However, if it were a green loop, you would NOT drop it on an external MIDI track (I think that's what you're trying to do if you're dragging it onto the 'Grand Piano MIDI instrument'), but you would create a SOFTWARE INSTRUMENT track, and drag it on that. Any internal sounds you want to play from Logic's instrument you'll do from Software Instrument tracks, and not MIDI tracks.
What you should do to find a good chime sound that you can play with the caps lock keyboard is to create a Software Instrument Track, open the Library tab, and search there for a good chime. This will search all of the instruments and presets that Logic has for all of its internal instruments. Try 'Tubular Bells' and see if that works for you.
If you need to use the bells from that loop, do what SC suggested, and take the hits from the audio file and load them into a sampler. Then you can play them the way you want to. If you don't know how to make a sampler, it's a bit complicated. Look up EXS24 in the manual, or check out
http://www.youtube.com/user/SFLogicNinja
I think he has a video or two on EXS24

HT201177 I can't play videos on the web - they just stall - stop and start.

when I am playing videos on the web, Vimeo for example, they play for about one or two seconds and stall. Then they play another one or two seconds and so on for the entire video. I have no means of changing the download size in safari preferences. I am at a loss what to do. i know of no-one else with this difficulty and the Microsoft laptop on the same broadband router dos not have this problem.

Empty the Cache, and you can also try the RE-SET Safari option from the menu-bar.
Let us know if anything changes.

Stop and go audio playback

Whether I'm watching a DVD or playing MP3's off of my hard drive, I get this weird stop and go along with a 'honking' type sound. Sounds kind of like the buzzer when you get a question wrong on Jeopardy. I posted this almost a month ago but got no responses. Did a live chat with an HP tech guy and he had me reinstall all the drivers and update the BIOS. Didn't help and now it's getting progressively worse. Most annoying!

resolved

Why does Playback stop when I have an external MIDI channel?

I finally have to try to sync up external gear with Mainstage 2.2.2. This time it's sending midi clock to an Akai MPK25. I set up the external midi instrument channel, set the channel's midi out to port 1 on the Akai, set the Akai to external clock. The Akai seems to pick up the tempo (mostly) but my Playback instances that start with Play action cut out after about 1 measure (yes they're set to Loop).
Doesn't mater which instance. The clock keeps going but there's a substantial lag to the transport controls. After a few seconds I can retrigger the Playback that stopped and then it loops as it should.
As soon as I delete the external midi strip, everything is back to normal. Has anyone else experienced this? Is it fixable? Maybe an Akai thing?
I've wrestled with MS to get it gig-worthy for a year and some new bug always seems to pop up.
System:
iMac 20" Core2Duo 2GHz, 4GB RAM

I try 2/3 things.
- monitor sleep after 1 minute
- computer sleep after 3h
- itunes playing songs
.....after a minute, monitor sleep and so does itunes....
VLC doesn't have this issu (luckyly)....

Playback stops

I have an HP Pavillion laptop (dv6) with Windows 7 and Premier Elements 4.0. I have created slide show dvd's on this program before, but not on this laptop. I am trying to preview the video to edit and it just stops on some slides. I am a novice and don't know where to look to try to fix this problem. Thanks for any help!

AceCoolie
Please start you own new thread on your "Playback Stops" issue so that your details and troubleshooting do not get buried tacked on to the end of the thread of another. Problems with the same symptoms can (often do) have different causes.
But, wherever we discuss your issue, you will need to supply the details specific to your situation. So far we know Premiere Elements 12 on Windows 8.1 64 bit. What about the important information related to:
a. properties of source media
b. project preset set by you or the project...see Edit Menu/Project Settings/General and Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio readings (even if they looked grayed out) if you do not know the project preset which should be matching the properties of the source media.
c. lots more questions based on the answers to the basics
We will be watching for your follow up wherever it might be.
Thank you.
ATR

Audio playback stops short

Has anyone had problems with audio playback in a previewed or published presentation where the playback stop short and advanced to the next slide?

Brian,
The fact that this mp3 is about the same size as a standard 16 bit/44.1k stereo file of a 3 or 4 minute song, indicates to me that it's an extremely long file.
I'm willing to bet you have run into the measure limit within a Logic song. It's 2000 something (can't remember it exactly).
The standard work around is to drop Logic's tempo to something really slow, thus allowing the larger file to be able to play within the Logic song limit.
See if that's it...

IOS playback stopped working

I've installed Flash Media Interactive Server 4.5 and after installation I successfully streamed to iOS devices.
Today, streaming to iOS devices, suddenly stopped working. Streaming to other Flash compatible devices works just fine.
I use JWPlayer to connect and that gives the following error message:
The video playback was aborted due to a corruption problem or because the video used features your browser did not support:
http://my.fms.url/hls-live/livepkgr/_definst_/live/mystream.m3u8
Some times, if I reload the site and try again, I do get a few seconds of playback of the live stream, then the playback stops with the same error message, and I can't seem to be able to play back the stream ever again.
I've tried deleting the .stream-files generated in the ApplicationsFolder\livepkgr\events\_definst_\live as well as the files generated in ApplicationsFolder\livepkgr\streams\_definst_\mystream but that doesn't help.
I use Adobe Media Live Encoder 3.2 to stream to the server, using H.264 and AAC.
As I mentioned, this has worked before and, as far as I remember, haven't made any configuration changes since it last worked.

I tried stopping the server and deleting the livepkgr streams and events, and when I restarted the server (and live stream) it seems to work correctly again. I do believe my live streams problems was also present some time after having done this earlier so I'm gonna stream for a bit now, stop it, then start again tomorrow to see if I can still stream correctly.
In the meantime, here's my httpd.conf as requested:
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Please see httpd.conf.orig for the configuration of a default
# (non-FMS) installation of apache.
Listen 80
# If you plan to run FMS as root on linux, you _must_ specify a
# valid user, with access to the FMS installation direction, or
# apache will not run.
# If you've used the default installer, nobody (or whatever other
# username you gave to the installer) will work here.
# If you're running a developer build under your own home directory,
# you should use your own username.
AccessFileName .htaccess
ServerSignature On
UseCanonicalName Off
HostnameLookups Off
Timeout 120
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
ErrorLog logs/error_log
LogLevel info
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
CustomLog logs/access_log combined
DocumentRoot "../webroot"
DirectoryIndex index.html index.html.var index.php index.php3 index.php4 index.php5 index.py index.pl index.rb
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
    Satisfy all
</Directory>
<Directory "../webroot">
    Options -Indexes FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
Alias /documentation ../documentation/
<Directory ../documentation/>
    Options FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
Alias /icons/ "icons/"
<Directory "icons">
    Options MultiViews FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
Alias /error/ "error/"
ScriptAlias /cgi-bin/ "cgi-bin/"
<Directory "cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
<Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from 10.0.0.0/8
    Allow from 172.16.0.0/12
    Allow from 192.168.0.0/16
    Allow from 127.
</Location>
ExtendedStatus On
<Location /server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from 10.0.0.0/8
    Allow from 172.16.0.0/12
    Allow from 192.168.0.0/16
    Allow from 127.
</Location>
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
<IfModule mpm_winnt_module>
    ThreadsPerChild 250
    MaxRequestsPerChild 0
</IfModule>
<IfModule worker_module>
    StartServers         2
    MaxClients         150
    MinSpareThreads     25
    MaxSpareThreads     75
    ThreadsPerChild     25
    MaxRequestsPerChild 0
</IfModule>
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
<IfModule mpm_winnt_module>
    LoadModule cgi_module modules/mod_cgi.so
</IfModule>
<IfModule worker_module>
    LoadModule cgid_module modules/mod_cgid.so
</IfModule>
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
<IfModule mpm_winnt_module>
    LoadModule isapi_module modules/mod_isapi.so
</IfModule>
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule f4fhttp_module modules/mod_f4fhttp.so
LoadModule hlshttp_module modules/mod_hlshttp.so
LoadModule jithttp_module modules/mod_jithttp.so
# The following section enables caching of Just-In-Time packaged content     #
# Use htcacheclean tool to manage the amount of data that is cached on disk. #
# See Apache documentation for its usage.                                    #
# http://httpd.apache.org/docs/2.2/programs/htcacheclean.html                #
# Make sure the directory specified by the CacheRoot directive exists. The   #
# default is a directory named cacheroot that is directly under the Apache   #
# installation directory.                                                    #
# For more information on content caching, see Apache documentation          #
# http://httpd.apache.org/docs/2.2/caching.html                              #
# Uncomment this to enable caching
#LoadModule cache_module modules/mod_cache.so
<IfModule mod_cache.c>
    LoadModule disk_cache_module modules/mod_disk_cache.so
    <IfModule mod_disk_cache.c>
        CacheEnable disk /hds-vod
        CacheEnable disk /hls-vod
        CacheRoot cacheroot
        CacheMaxFileSize 10000000
        CacheLock On
    </IfModule>
</IfModule>
<IfModule f4fhttp_module>
<Location /vod>
    HttpStreamingEnabled true
    HttpStreamingContentPath "../webroot/vod"
    Options -Indexes FollowSymLinks
</Location>
# map old style url to new (as of FMS 4.5), more compact url
Redirect 301 /live/events/livepkgr/events /hds-live/livepkgr
<Location /hds-live>
    HttpStreamingEnabled true
    HttpStreamingLiveEventPath "E:\FlashMediaApplications"
    HttpStreamingContentPath "E:\FlashMediaApplications"
    HttpStreamingF4MMaxAge 2
    HttpStreamingBootstrapMaxAge 2
    HttpStreamingFragMaxAge -1
    Options -Indexes FollowSymLinks
</Location>
</IfModule>
<IfModule hlshttp_module>
<Location /hls-live>
    HLSHttpStreamingEnabled true
    HttpStreamingLiveEventPath "E:\FlashMediaApplications"
    HttpStreamingContentPath "E:\FlashMediaApplications"
    HLSMediaFileDuration 8000
    HLSSlidingWindowLength 6
    HLSFmsDirPath ".."
    HLSM3U8MaxAge 2
    HLSTSSegmentMaxAge -1
# Uncomment the following directives to enable encryption
# for this location.
#    HLSEncryptionScope server
#    HLSEncryptCipherKeyFile "../phls/liveeventkey.bin"
#    HLSEncryptKeyURI        "https://<ServerName>/hls-key/liveeventkey.bin"
    Options -Indexes FollowSymLinks
</Location>
<Location /hls-vod>
    HLSHttpStreamingEnabled true
    HLSMediaFileDuration 8000
    HttpStreamingContentPath "E:\FlashMediaApplications"
    HLSFmsDirPath ".."
# Uncomment the following directives to enable encryption
# for this location.
#    HLSEncryptionScope server
#    HLSEncryptCipherKeyFile "../phls/vodkey.bin"
#    HLSEncryptKeyURI        "https://<ServerName>/hls-key/vodkey.bin"
    Options -Indexes FollowSymLinks
</Location>
</IfModule>
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    HttpStreamingContentPath "E:\FlashMediaApplications"
    JitFmsDirPath ".."
    Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
#   EncryptionScope server
#   ProtectionScheme phds
</Location>
</IfModule>
TypesConfig conf/mime.types
MIMEMagicFile conf/magic
DefaultType text/plain
AddType video/x-flv .flv
AddType video/MP2T .ts
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-mpegurl .m3u8
AddHandler send-as-is asis
AddHandler type-map var
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
<IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
</IfModule>
<IfModule userdir_module>
    UserDir disable
</IfModule>
<IfModule dav_fs_module>
    DAVLockDB tmp/dav/lockdb
</IfModule>
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIconByType (VID,/icons/movie.gif) application/x-shockwave-flash
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
ForceLanguagePriority Prefer Fallback
AddDefaultCharset UTF-8
<IfModule mod_negotiation.c>
    <IfModule mod_include.c>
        <Directory "error">
            AllowOverride None
            Options IncludesNoExec
            AddOutputFilter Includes html
            AddHandler type-map var
            Order allow,deny
            Allow from all
            LanguagePriority en es de fr
            ForceLanguagePriority Prefer Fallback
        </Directory>
    </IfModule>
</IfModule>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
#Uncomment following for enabling https based key serving
#for HLS.
#Include conf/httpd-hls-secure.conf

Playback stops and stalls

Similar Messages

Maybe you are looking for