PLAYBACK STOPS - NO SOUND - SONG STILL PROGRESSES.

very often my mp3s and itunes songs will just go silent but remain playing. i have to pause and play again to get the sound back, but a few moments later it will happen again. if i don't pause and play the sound never comes back. it's as if i've turned my speakers off when i clearly haven't. anyone else have this? i have the fuzzy problem too but no1 seems to have focussed on this. is it just me? (i have all direct x and all that)

Hey, I have a related problem...whenever I play a song, sometimes some songs stop 20 seconds before they are finished and restart. I checked the start and stop time, they all are as the song should be...but some how it is not working..

Similar Messages

Playback stopping after each song

Everytime I try and play a playlist, or album from the library, the songs do not continuously play. After each song I have to restart the next song. They all play fine, they just no longer continuously play. Did I hit a button or something that I shouldn't have? I have looked all over trying to find the answer to this one, but could find no topic that addressed this.
TIA

Are there check marks beside all the songs in the playlist/library? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other. If you hold down the CRTL key and click beside any song in your list then all the check boxes can be toggled on or off: iTunes - Keyboard Shortcuts for Windows

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

HT4623 my phone 4s stop making sounds, I tried reset and still no sounds only vibrate reset all settings under general and still have the problem, also sync again to see if this help. still no sounds

my I phone 4s stop making sounds, I tried reset and still no sounds only vibrate. Did reset - all settings under general and still have the problem, I also re- sync again to see if this help. still no sounds.

Hi there,
It sounds like you have tried a few things already, but you may still find the article below helpful.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
-Griff W.

For certain songs on my iPhone 4s with iOS7 some songs stop playing audio but continue playing the song almost as if it were muted. Where can I fix this? Say "Stronger" by Kanye West stops playing sound after 2:25 but it is 5 minutes long.

Basically it is just like it says. Certain songs stop playing sound after a certain point in the song but the song continues playing and ticking down like it normally would. Does anyone else have this problem?

Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
from
Mike N. (nahyun...
Posts: 2,814
From: New York, NY
Registered: Oct 1, 2003
Re: itune application and itune folder
Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
Solved
Reply Email
Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
Austin Smith2
Posts: 118
Registered: Oct 31, 2001
Re: itune application and itune folder
Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
Reply Email
Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!!

Sound/Playback Stops Suddenly in Windows Vi

I have recently encountered a very strange problem with my computer: the sound/playback stops working randomly. For instance, let's say I've just rebooted my computer and have launched WMP to play some mp3s. It will work fine for anywhere from a day or two to, at minimum, a few minutes...and then, once an mp3 file finishes playing, sometimes I will hear a weird sort of "squeak" coming from the speakers--after which playback will not work--but even if I do not hear any sort of strange audio, if I click another file to play...WMP will load the media, but will not play it. The play button will switch to pause as normal, but the file will not play. The exact same thing happens in *other* media players, as well: iTunes, J. Ri'ver Media Center...even WinAMP. I have a SoundBlast X-Fi Platinum audio card, and have been running it under Windows Vista Home Premium since January with no problems. I have all the current Vista drivers installed for it, and *have* had them installed for months. I'm really not sure whether this problem is software- or hardware-related, hence the reason I'm crossposting this to?Microsoft's Vista?forums as well. What should my next step be? I'm not really sure where to go from here. Thank you!?Dere C. F. Pegritz

I have the same problem here too. Vista Ultimate 64bit4Gb RamX-fi Extreme Gamer Pro?Currently have to re-boot when it happens. I have just installed the new drivers (30 May) - I will see if this has any effect!?RegardsBrian.

After being open for a while (with several tabs) Firefox becomes generally unresponsive and stops playing sound - videos will still play, but no sound.

This problem has only begun happening recently. I commonly keep my Firefox open overnight with websites like rainymood.com or grooveshark.com playing, as well as several other tabs including but not limited to Facebook, Reddit, and YouTube. Sometimes, after several hours/days of not restarting Firefox or my computer, Firefox begins to become unresponsive - that is to say, pages take a long time to load, opening new tabs is difficult for the browser, and videos will take up to 30 seconds to begin playing. In addition to this, sound will stop playing; if I begin a YouTube video, after the initial period of excessive loading, the video will play, but without any audio. Also, websites such as rainymood.com and grooveshark, even Facebook, will stop making sound.
Note that this is different from a flash plugin crash - when flash crashes, both audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; if I refresh the tab, nothing changes, and even if I restart Firefox, it opens again the same way until I restart my computer completely.
Also of note: I have had, in the past, this same thing happen but rainymood.com continued playing, however no other tabs would make sound. The problem is sporadic and I'm not sure where to begin. Also, sometimes this is only a Firefox-specific problem, meaning other programs on my computer can make sounds, but sometimes this problem makes my entire computer stop making sounds, except for Ventrilo, which works but is also unresponsive at first.

You can also try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

Videos start but stop although sound continues

Videos will start along with sound but the video will stop although sound continues.If I move my pointer over the video it will jump to where the progress bar indicates where the video is at it's current playback time.How can I fix this problem?

Let me revise this question.Same problem with YouTube vids on Facebook/YouTube ect as stated above with the problem being video hangups.If I wave my mouse pointer over the video in progress the video proceeds but will stop if I don't wave the pointer over the vid.The vid will load and I can hear audio playback but the image will just stop while the audio is still playing.

How can I remove a child swf and stop all sounds when parent closes?

Hi All,
I am new to actionscript 3 and trying to learn as I go. The problem I am having is the following:
I have a carousel of images that load an external swf movie with a FLVPlayback component on it. The problem is that when the external swf unloads the sound of the FLVPlayback component continues to play. I am using a carousel component I found online to load the images and each image loads an external swf file. here is the code for it.
import com.carousel.DegreeCarousel;
import com.carousel.data.CarouselDO;
import com.carousel.data.AngleDO;
import com.carousel.data.ItemDO;
// DEFINING THE CAROUSEL OBJECT
var carouselSettings:CarouselDO = new CarouselDO();
carouselSettings.radiusX = 300;
carouselSettings.radiusY = 0;
carouselSettings.fov = 50;
carouselSettings.transitionTime = 1;
carouselSettings.ease = "easeInOutQuint";
carouselSettings.useToolTip = 0;
carouselSettings.useBlur = 1;
carouselSettings.maxBlur = 8;
carouselSettings.reflectionAlpha = 0.2;
// DEFINING ANGLES SETTINGS
var angleSettings_arr:Array = new Array();
angleSettings_arr[0] = new AngleDO({angle:0,alpha:1,scale:0.5});
angleSettings_arr[1] = new AngleDO({angle:90,alpha:1,scale:1});
angleSettings_arr[2] = new AngleDO({angle:180,alpha:1,scale:0.5});
// DEFINING THE ITEMS
var prefix = "content/thumbs/"
var galleryItems:Array = new Array();
galleryItems[0] = new ItemDO({thumb:prefix + "image_1.jpg", content:prefix + "swf1.swf", contentType: "flash"});
galleryItems[1] = new ItemDO({thumb:prefix + "image_2.jpg", content:prefix + "swf1.swf", contentType: "flash"});
galleryItems[2] = new ItemDO({thumb:prefix + "image_3.jpg", content:prefix + "swf1.swf", contentType: "flash"});
// PLACING THE CAROUSEL TO STAGE
var carousel:DegreeCarousel = new DegreeCarousel(carouselSettings,angleSettings_arr,galleryItems);
carousel.x = stage.stageWidth * .5;
carousel.y = stage.stageHeight * .5;
this.addChild(carousel);
// KEYBOARD NAVIGATION
// KEYBOARD EVENTS
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
function keyDownHandler(e:KeyboardEvent):void
    // left
    if(e.keyCode == 37)
        carousel.left(1);
    // right
    if(e.keyCode == 39)
        carousel.right(1);
    // top
    if(e.keyCode == 38)
        carousel.prevCycle();
    // Down
    if(e.keyCode == 40)
        carousel.nextCycle();
    // Space
    if(e.keyCode == 32)
The external movie loads fine. Then the external swf calls for a second swf containing a video. This is the code that is used to load the swf:
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.display.MovieClip;
import flash.events.MouseEvent;
var myVideo:URLRequest = new URLRequest("myvideo.swf");
var video:Loader = new Loader();
video.load(myVideo);
this.addChild(video);
When the carousel unloads, it unloads both movies but the sound keeps on playing.
Is there any way to stop the sound from keep playing?
Thank you very much!!
-M

You want to stop the audio from playing and also downloading more video/audio if it is still downloading when you go to a new keyframe where the video display/component or mp3 player is removed from the stage because it's keyframe ended or do not exist anymore but you still hear the audio.
Add an event listener to your video playback component that calls a function when the flash player tries to remove the video plaer from the stage that stops the netstream or at least stops/pauses the video playback.
[link removed]
//sample NetConnection and NetStream classes when the video player is removed from the stage tell the NetStream to stop playing or downloading the content with .close();
var connection:NetConnection = new NetConnection();
connection.connect(null);
var stream:NetStream = new NetStream(connection);
addEventListener(Event.REMOVED_FROM_STAGE, videoRemovedFromStage);
function videoRemovedFromStage(e:Event){
   stream.close();

IPhone randomly stops playing sound out of iPod docks?

I recently plugged my iPhone 4 iOS6.0.1 (the new update recently put out by apple) and it has stopped playing sound out of any iPod dock I plug it into.
It plays sound normally out of the speakers and charges while on the dock. Has anyone had any problems similar and any solutions?
Also I have restored my whole iPhone this morning and it still has the same problem. My husband doesn't have this problem and he has the iPhone 3.
Is this a bug with the new iOS6.0.1 and is Apple going to put out a new update anytime soon to fix it? Or do I need to send my phone away.
Thank you.

It can't be 3 years old since the 5G iPod was first introduced in Oct 2012
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Playback stops after about 15 - 20 frames

This is a problem that I also have in cs4. I hit the space bar, after about 15 - 20 frames it stops. Looking at the task manager CPU utilization goes from about 4% to 100% and then playback stops.
System is an intel dual core running at 2.13 I think. Had 4 gig of memory now up to 8 gig. has 150 gig system drive, and a 600 gig dual drive raid 0 array for work in progress. Long term storage is on usb drives. System was running xp sp3 now windows 7 x64. Video card just upgraded to a new nvidia card.
System also has black magic intensity. Problem started quite a while ago before the recent upgrades. If cpu stays below 100% system works fine. Load in some effects and bang 100% cpu and it stops. Does not seem to matter what type of file. I use dv video (avi type 2), or hdv. As long as I am below 100% it works fine. Hits 100% and stops. I could understand it stuttering if the cores are both at 100, but why stop?
Motherboard is an intel dg965wh. Audio is a function of what the system is doing, has onboard audio, usb audio and black magic audio. One other annoying bug if the blackmagic card is set as the video out, that is the only p[lace audio will come out no matter what the hardware settings.
I am running out of brilliant and stupid ideas at this point and any suggestions would be greatly appreciated.
Ken

Ignoring the Intensity card for a second, if you're running PPro on its own, this symptom is usually one of two possibilities:
- bad display drivers (don't assume that Win7 will download the correct ones, go get the sanctioned 197.x drivers from the nVidia site)
- bad audio drivers. If you have the 'right' drivers for your system, try downloading the 'Asio4All' set (google around on this forum for other posts on this topic).
I would probably remove the Intensity card & uninstall its drivers, troubleshoot the above, then when it's playing correctly, add back the Intensity card. The card is the other factor that could be playing into this (for instance, their own sound driver options could be the trigger here), but I'm not sure what to offer for Black Magic troubleshooting suggestions.

8gb touch stops midway through songs! halp!

Hey everyone. This problem started after I got a itunes gift card. The downloads wouldn't work on my computer, so i re-logged in as an administrator (i'm running vista premium) Well, i start downloading and Bam, they're done, and the songs play fine on my computer. Also, video works fine. So i go to sync this with my ipod, and i started listening. Some songs, at random intervals the song will cut out. just dead. If i let it go, it will just advance to the enxt song automatically, but it still says there is time left. If i take the time bar and move it, then the song will continue. I've triend re-syncing it, deleting data, and even completely re registering the ipod in itunes as a different name and wiping it. None of this works. So, internet, help me. The songs work fine on my computer but not on the ipod. Also, im using a stock ipod Usb 2.0 connector. I've tried plugging it into different usb ports throughout the computer with no avail.
Help!

SAME HERE!! iMac 800 MHz PPC G4 w/768MB RAM, OSX 10.4.11 and iTunes 8.0.2. Some tunes (not all) we've purchased and downloaded play partway through then stop and we go on to the next one in the list. Erg!
Here's what I've checked so far:
- start time
- stop time
- part of a gapless album
I've enabled and disabled all of those options and tried playback of the same song over and over with each variation. (I'm SO tired of that one song now!) No difference. In fact, exact same symptom, right down to the same measure and beat in the song each time it stops. What else is there to try?

Audio playback stops short

Has anyone had problems with audio playback in a previewed or published presentation where the playback stop short and advanced to the next slide?

Brian,
The fact that this mp3 is about the same size as a standard 16 bit/44.1k stereo file of a 3 or 4 minute song, indicates to me that it's an extremely long file.
I'm willing to bet you have run into the measure limit within a Logic song. It's 2000 something (can't remember it exactly).
The standard work around is to drop Logic's tempo to something really slow, thus allowing the larger file to be able to play within the Logic song limit.
See if that's it...

IOS playback stopped working

I've installed Flash Media Interactive Server 4.5 and after installation I successfully streamed to iOS devices.
Today, streaming to iOS devices, suddenly stopped working. Streaming to other Flash compatible devices works just fine.
I use JWPlayer to connect and that gives the following error message:
The video playback was aborted due to a corruption problem or because the video used features your browser did not support:
http://my.fms.url/hls-live/livepkgr/_definst_/live/mystream.m3u8
Some times, if I reload the site and try again, I do get a few seconds of playback of the live stream, then the playback stops with the same error message, and I can't seem to be able to play back the stream ever again.
I've tried deleting the .stream-files generated in the ApplicationsFolder\livepkgr\events\_definst_\live as well as the files generated in ApplicationsFolder\livepkgr\streams\_definst_\mystream but that doesn't help.
I use Adobe Media Live Encoder 3.2 to stream to the server, using H.264 and AAC.
As I mentioned, this has worked before and, as far as I remember, haven't made any configuration changes since it last worked.

I tried stopping the server and deleting the livepkgr streams and events, and when I restarted the server (and live stream) it seems to work correctly again. I do believe my live streams problems was also present some time after having done this earlier so I'm gonna stream for a bit now, stop it, then start again tomorrow to see if I can still stream correctly.
In the meantime, here's my httpd.conf as requested:
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Please see httpd.conf.orig for the configuration of a default
# (non-FMS) installation of apache.
Listen 80
# If you plan to run FMS as root on linux, you _must_ specify a
# valid user, with access to the FMS installation direction, or
# apache will not run.
# If you've used the default installer, nobody (or whatever other
# username you gave to the installer) will work here.
# If you're running a developer build under your own home directory,
# you should use your own username.
AccessFileName .htaccess
ServerSignature On
UseCanonicalName Off
HostnameLookups Off
Timeout 120
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
ErrorLog logs/error_log
LogLevel info
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
CustomLog logs/access_log combined
DocumentRoot "../webroot"
DirectoryIndex index.html index.html.var index.php index.php3 index.php4 index.php5 index.py index.pl index.rb
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
    Satisfy all
</Directory>
<Directory "../webroot">
    Options -Indexes FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
Alias /documentation ../documentation/
<Directory ../documentation/>
    Options FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
Alias /icons/ "icons/"
<Directory "icons">
    Options MultiViews FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
Alias /error/ "error/"
ScriptAlias /cgi-bin/ "cgi-bin/"
<Directory "cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
<Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from 10.0.0.0/8
    Allow from 172.16.0.0/12
    Allow from 192.168.0.0/16
    Allow from 127.
</Location>
ExtendedStatus On
<Location /server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from 10.0.0.0/8
    Allow from 172.16.0.0/12
    Allow from 192.168.0.0/16
    Allow from 127.
</Location>
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
<IfModule mpm_winnt_module>
    ThreadsPerChild 250
    MaxRequestsPerChild 0
</IfModule>
<IfModule worker_module>
    StartServers         2
    MaxClients         150
    MinSpareThreads     25
    MaxSpareThreads     75
    ThreadsPerChild     25
    MaxRequestsPerChild 0
</IfModule>
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
<IfModule mpm_winnt_module>
    LoadModule cgi_module modules/mod_cgi.so
</IfModule>
<IfModule worker_module>
    LoadModule cgid_module modules/mod_cgid.so
</IfModule>
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
<IfModule mpm_winnt_module>
    LoadModule isapi_module modules/mod_isapi.so
</IfModule>
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule f4fhttp_module modules/mod_f4fhttp.so
LoadModule hlshttp_module modules/mod_hlshttp.so
LoadModule jithttp_module modules/mod_jithttp.so
# The following section enables caching of Just-In-Time packaged content     #
# Use htcacheclean tool to manage the amount of data that is cached on disk. #
# See Apache documentation for its usage.                                    #
# http://httpd.apache.org/docs/2.2/programs/htcacheclean.html                #
# Make sure the directory specified by the CacheRoot directive exists. The   #
# default is a directory named cacheroot that is directly under the Apache   #
# installation directory.                                                    #
# For more information on content caching, see Apache documentation          #
# http://httpd.apache.org/docs/2.2/caching.html                              #
# Uncomment this to enable caching
#LoadModule cache_module modules/mod_cache.so
<IfModule mod_cache.c>
    LoadModule disk_cache_module modules/mod_disk_cache.so
    <IfModule mod_disk_cache.c>
        CacheEnable disk /hds-vod
        CacheEnable disk /hls-vod
        CacheRoot cacheroot
        CacheMaxFileSize 10000000
        CacheLock On
    </IfModule>
</IfModule>
<IfModule f4fhttp_module>
<Location /vod>
    HttpStreamingEnabled true
    HttpStreamingContentPath "../webroot/vod"
    Options -Indexes FollowSymLinks
</Location>
# map old style url to new (as of FMS 4.5), more compact url
Redirect 301 /live/events/livepkgr/events /hds-live/livepkgr
<Location /hds-live>
    HttpStreamingEnabled true
    HttpStreamingLiveEventPath "E:\FlashMediaApplications"
    HttpStreamingContentPath "E:\FlashMediaApplications"
    HttpStreamingF4MMaxAge 2
    HttpStreamingBootstrapMaxAge 2
    HttpStreamingFragMaxAge -1
    Options -Indexes FollowSymLinks
</Location>
</IfModule>
<IfModule hlshttp_module>
<Location /hls-live>
    HLSHttpStreamingEnabled true
    HttpStreamingLiveEventPath "E:\FlashMediaApplications"
    HttpStreamingContentPath "E:\FlashMediaApplications"
    HLSMediaFileDuration 8000
    HLSSlidingWindowLength 6
    HLSFmsDirPath ".."
    HLSM3U8MaxAge 2
    HLSTSSegmentMaxAge -1
# Uncomment the following directives to enable encryption
# for this location.
#    HLSEncryptionScope server
#    HLSEncryptCipherKeyFile "../phls/liveeventkey.bin"
#    HLSEncryptKeyURI        "https://<ServerName>/hls-key/liveeventkey.bin"
    Options -Indexes FollowSymLinks
</Location>
<Location /hls-vod>
    HLSHttpStreamingEnabled true
    HLSMediaFileDuration 8000
    HttpStreamingContentPath "E:\FlashMediaApplications"
    HLSFmsDirPath ".."
# Uncomment the following directives to enable encryption
# for this location.
#    HLSEncryptionScope server
#    HLSEncryptCipherKeyFile "../phls/vodkey.bin"
#    HLSEncryptKeyURI        "https://<ServerName>/hls-key/vodkey.bin"
    Options -Indexes FollowSymLinks
</Location>
</IfModule>
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    HttpStreamingContentPath "E:\FlashMediaApplications"
    JitFmsDirPath ".."
    Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
#   EncryptionScope server
#   ProtectionScheme phds
</Location>
</IfModule>
TypesConfig conf/mime.types
MIMEMagicFile conf/magic
DefaultType text/plain
AddType video/x-flv .flv
AddType video/MP2T .ts
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-mpegurl .m3u8
AddHandler send-as-is asis
AddHandler type-map var
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
<IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
</IfModule>
<IfModule userdir_module>
    UserDir disable
</IfModule>
<IfModule dav_fs_module>
    DAVLockDB tmp/dav/lockdb
</IfModule>
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIconByType (VID,/icons/movie.gif) application/x-shockwave-flash
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
ForceLanguagePriority Prefer Fallback
AddDefaultCharset UTF-8
<IfModule mod_negotiation.c>
    <IfModule mod_include.c>
        <Directory "error">
            AllowOverride None
            Options IncludesNoExec
            AddOutputFilter Includes html
            AddHandler type-map var
            Order allow,deny
            Allow from all
            LanguagePriority en es de fr
            ForceLanguagePriority Prefer Fallback
        </Directory>
    </IfModule>
</IfModule>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
#Uncomment following for enabling https based key serving
#for HLS.
#Include conf/httpd-hls-secure.conf

My iPad just randomly stopped having sound and will not shut down only restart.

my iPad just stopped have sound. Only works with ear-buds. Also, now when I power it down or even force it, will only restart & will not stay shut off. I have done the whole mute/lock thing, did a reset & even backed it up & restored it. Anybody have any suggestions?? thanks!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

PLAYBACK STOPS - NO SOUND - SONG STILL PROGRESSES.

Similar Messages

Maybe you are looking for