Playback won't work using Mbox as audio device

We were previously using Premiere Elements (we're on version 9.0.1) with a Digidesign 002 as the audio interface and everything worked fine. We have since moved that computer to another workstation with an Mbox Pro, and are having issues whenever the audio hardware and output are set to use the Mbox. Specifically, playback will run for about 15 milliseconds, and then stops. If we set Premiere to use the built-in line out, everything works fine.
I have updated the Mbox drivers with no effect. My hunch is that this also has something to do with having upgraded from Pro Tools 8 to 10, which doesn't seem to use Core Audio the same way, but any help would be greatly appreciated!

Welcome to the forum.
When Audio hardware is not working with an Adobe program, I first look at the ASIO settings. I suspect that you have already checked that out carefully.
Next step, when all setting ARE correct, and I still have issues, I install a free ASIO driver, ASIO4All, and set the Adobe program to use that. It has cleared up all sorts of issues with Adobe programs, with low-end consumer cards to some esoteric pro gear. It's probably the most often recommended "fix" on the Adobe Audition Forum.
Good luck,
Hunt

Similar Messages

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

Ah that was it, thanks a lot common sense really but thanks for the help

Using an alternate Audio Device in iTunes.

I'd like to set iTunes to use an external USB DAC, but keep the rest of the system using the internal audio device. It is possible to do this via Airplay, but not using other audio devices AFAIK.
The only way to get iTunes to send to the DAC via USB is to set the whole system to use the DAC, which I don't want to do if it can be avoided.
Other Apps such a VOX let you do this, but seems like iTunes can't.

iTunes can play WAV, Apple Lossless, or AIFF files in 24/96.

IChat WON'T WORK using audio or video chatting [PLEASE HELP]

Bought a Mac a couple months ago and I'm pretty (yeah, that's VERY) happy about it. The thing is when it comes down to my iChat, I wanted so much to have video conference with my family in Brazil while I'm studying in Spain -- but I Just can't! =(
Let's put it that way: iChat won't recognize my (Googlechat) friends and their webcams; and as long as I'm connected, I have never seen any sort of "audio label" beside their names.
So can any Mac-pro please help me out explaining what the matter is?
Can't I talk to my friends just because the're using PCs -- or there's nothing to do with it?
I've tried everything, from Preferences to Praying; and it won't work. Just wanna let you guys know that all the people that I'm trying to talk to have webcams and microphones plugged-in.
PS - Plus, I got this huge agenda full of contacts (around 2,000) that appear to be on my iChat list, but they're somehow never online. Is that because I have to send them an invitation to join my Googlechat? =/
I'm totally lost here.
I'd appreciate if you people could answer me quick - as you always do here =). Tomorrow I'll have this unique chance to talk to my grandmother (for she's living in some sort of farm far away from civilized world) and I'd REALLY want to chat via Video Conference with my family tomorrow night.
Sorry for my bad english and thanks in advance.
Sylvio Quadros (Brazil)

Hi,
You can Add an Google Mail ID (@gmail.com or @googlemail.com) as your ID/screen Name in iChat.
From iChat to iChat this will also do Video or Audio Chats as well as Text chats.
From iChat to anyone using the Google Web Mail page you can text chat as the Video and Audio codecs are different.
The same is true of the PC app for GoogleTalk.
To be able to login in to Google Talk using iChat your have to Enter you ID as it is written on any Google Page when you are logged in (Ends with either @gmail.com or @google.com), Mail seems to cope with either but iChat needs it to match.
You also have to Enable the Talk option on your Google Account info.
To See the Green Video and audio icons go to the View Menu of ichat and Select Show Audio and Show Video.
If you are trying to Chat with a PC I would use one of these
Alternatives to iChat but Video chatting In a Web Browser
MeBeam. An option to use a Web site that create Private room for Video Chatting. Uses Flash to access your Camera and Mic.
iVideoChat Similar setup but a somewhat corporate type look to the site. Has Public rooms as well. Again uses Flash.
Googlemail/GoogeTalk now do a Version in a Web Browser
Tokbox A Site that can link your existing Buddy Lists that Uses Flash to Video chat in a Browser.
From http://www.ralphjohns.co.uk/page5.html#_other
Tokbox allows you to link to existing Buddy Lists.
7:42 PM Thursday; March 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How do I use 2 Core Audio devices at the same time in Logic w/out switching

Hello, I use the Aardvark Direct Mix usb3 as my audio interface for mic and guitar. I just upgraded to Logic Pro 7 today and was hoping someone could tell me how I could use the Built-in Audio Core Audio driver along with the Direct Mix USB Core Audio Driver at the same time without having to switch Core Audio Driver's and than rebooting Logic. It is very frustrating doing that as well as not being able to hear my Logic audio during playback/record mode when I am trying to record via the USB3. WHat can I do? Thanks! If ther are both core audio, why can I not just use both of them at the same time? Why must a switch back and forth? Thanks!
[email protected]

THanks everyone! awsome article! Thanks for posting it, nh!
The weird thing is, once I go up to the Menu and select Open Aggregate Device Editor in the AUDIO/MIDI setup utility and try to add a new Aggregate Device setup (step # 6 from the link), the only audio device available is the "Built-in Audio". What's weird is when I have the main Audio MIDI Setup utility open, every single drop-down menu/tab has the "Direct Mix USB 3 1.0.9.1" device right beneath the "Built-in Audio" option. To me that says that the core audio device is indeed recognized by my computer (obviously since I can record with it using Logic). Can anyone help me with this one? Any suggestions?
Not that it should matter but, the hardware audio interface that I am using is made by the no-longer-existant company once known as Aardvark. I actually had to purchase a third party Core Audio driver just to have it recognized by OS X.
This is the website where I purchased my audio driver :
http://www.usb-audio.com/
A little more on how this device and it's core audio driver function within Logic . . . (Hopefully this might clarify something I may be screwing up) . . .
I launch Logic with its default Built-in Audio which allows playback of audio from the app. I than go up to Audio Hardware and Drivers and than drop the flip down Driver menu down to the second option, "Direct Mix USB 3 1.0.9.1." Logic than prompts me that I should try to (re)launch Logic Pro to load the appropriate CoreAudio.. I do that. Now I am ready to record guitar through the Direct Mix USB3, I just can't hear anything (unless I use head phones as an output from the Direct Mix).
Anyway, you all probably already knew what I meant so explaining that was pointless. But my question is, if the Driver is obviously recognized by my comp in both the Audio MIDI Setup and in Logic, than why won't the Direct Mix device show up as a possibility for setting up an aggregate device? Any suggestions? Thanks!
Power Mac G5 Dual 2.7Ghz 4.5gigs of RAM Mac OS X (10.4.7)
Power Mac G5 Dual 2.7Ghz 2.5gigs of RAM Mac OS X (10.4)

Cube won't process iTunes without an audio device present?

Hi.
I've got a G4 Cube with no built-in Audio inputs or outputs (don't have the original USB speakers), so Tiger shows up as having no audio I/O options. I'm trying to use iTunes, with Nicecast, to broadcast some music, but because of the lack of audio devices iTunes (6.0.3) simply won't play - the play icon changes but the time doesn't progress and nothing is processed.
Does anyone know if a way to fool the Cube into thinking there's an audio device, so that it plays and is processed by CoreAudio? A software-only audio device or something? Would rather avoid having to buy some USB speakers just to get this to work.
Thanks for your time.

Hi,
Don't know about software doing the job because it's a mechanical interface. Any sound output will require USB or Firewire devices. Griffin Technology iMic USB Audio Interface is one inexpensive way to 'trick' the Cube into thinking there are speakers. It costs about $35, Google for prices.
Just plug it in, the Cube will see an output, set sound pref's and the program will work. Later, if you want speakers, you can get a cheap set and plug it into the iMic.
Regards,
Dave

X-Fi Extreme Audio PCIe Driver doenst work with Vista - HD Audio Device is installed automati

Hey,
after trying for hours this forum is my last hope. For about a year my PC worked more or less fine with Vista Business und the Soundblaster Extreme Audio PCIe (if you ignore the not working line in).
But today the driver vanished for no reason. Instead of the Creative Driver an Vista HD Audio Device was installed. I still got sound but the overall sound quality got really bad.
So i tried reinstalling the Soundcard using the Driver CD. There were no error messages but after a reboot there was still the HD
Audio Device. I downloaded the new driver from the creative HP: Same effect. I tried updating the HD Device, i tried deleting the Device. I even tried deleteing the the internal Driverfiles but after that I just got the problem that I had no audio device at all.
I don't think the card is broken because i get sound using the HD Driver.
Has anyone any idea what i can do to fix this

Funny fact: Today, after a reboot, the card worked again... Dunno why... But it does...

Audio live, dts connect, The task requires exclusive use of your audio device?

Hello. I have a problem. I can no longer configure my audio li've, dts connect. It goes to the off position and says "The task requires exclusi've use of your device. Please stop playback and try again" I restarted the pc twice but it says the same thing. What can I do? Please help.

It would appear that there is already another software that is taking exclusi've use of your?audio device.

Does X-Fi MB3 work with GeForce HDMI audio device?

If I buy http://software.store.creative.com/s...106-21569.aspx, will it work with my GTX 760's HDMI audio device which I'm connecting to my receiver?

Funny fact: Today, after a reboot, the card worked again... Dunno why... But it does...

PSE 8 - VIDEO PLAYBACK WON'T WORK

I created a project and was in the later stages of editing. I added a variety of video clips, photos, transistions, etc. All along the way, I was able to playback the video I was creating either throught the main window or if I opened up individual clips. I even burned a draft DVD to play on the TV and had no issues. Now, when I open the same project in PSE 8 and click play nothing happens. I open another project that worked in the past and had the same results, no video playback. The icon changes from |> to = when I click the playbutton. The video just doens not play in edit or organize mode. Although, the video did playback a little jerky before this no play problem occured. The video did play with sound that I added either through the video track or something I added.
I am using a HP M380N computer with Windows Xp Sp3, 3Gb RAM, 10GB available on hardrive(?), NVIDIA FX 5200 video card.
Any advice to solve problem of no playback and jerky playback when I can resume what I was able to do in the past....thanks Gary

10GB available on hardrive(?),
This is not really enough to load the program, and open a Project. You need between 30 - 50GB of defragmented free space.
The reason that you could probably playback before, was that you had more room. Now, you have filled your HDD to near total capacity.
I would clear about 30 - 50GB of space, or add additional HDD's, and allocate them differently. See this ARTICLE.
When a HDD gets to about 70% capacity, it begins to slow. the closer to 100%, the more likely that the HDD will fail, and at the very best, you are mechanically stressing the HDD, as the heads have to travel over the entire diameter of the platters.
If you still have issues, after cleaning up the HDD, quite a bit, please offer the full details of the Assets and the Project.
Good luck,
Hunt
PS - Welcome to the forum.

Time Machine Won't Work - Using a BOOT DISK and separate DATA DISK Drives

Ok, so I'm up and running the my new MacPro.
I did a boot drive and then I did a 3 drive "Data Volume" RAID for increased performance and am getting about 235mb speeds on the "data" drive.
Everything is great... except... TIME MACHINE doesn't work. I'm a backup fanatic, so I have TIME MACHINE to save "versions" of my files, plus I use SUPER DUPER, DROBO's etc.
So, I've tried deleting the network preferences file in the library folder and restarting, but to no avail.
Basically, if I open TIME MACHINE PREFS, it says backup failed and I cannot "change" the drive. It's like the MAC doesn't see if through the TIME MACHINE PREFERENCES, but the Time Capsule Disk is "mounted" in the finder and I can copy files directly.
Anyone have any advice?
Thanks!

Open Airport Utility and check that you have the TC properly configured with the drive shared and file sharing enabled. The TC drive must mount on the Desktop. It should also be partitioned using GUID partition map and formatted Mac OS Extended, Journaled. You might consider using Airport Utility to erase the TC disk.
I believe the TC user manual should provide information on how to set up the TC to use with TM.

IChat 4.0.2 Video Chat Won't Work using WiFi

Im pretty tech savy when it comes to fixing problems, but this is one I am just baffled by. I consistantly try to Video chat with my friend, but am unable to unless I am hardwired into an ethernet connection. If this is done, it does by perfectly, but when I try to video Chat over the my wireless network, it says connection failure without fail.
This is odd, because prior to leopard, I was able to video chat using my Wireless network on Tiger. Do you have any ideas what the problem may be and how I would fix it?
BTW, I have adjusted streaming settings about a dozen times with the iChat preferences and the quicktime preferences.
Message was edited by: DaMan009

Me too - I've chatted with my dad in the past when using the ethernet connection in my study, but predominantly I'm wireless around the house. Now, I can't video chat with him (although I can still make test video chats to the apple test servers).
I've tried at times to create a three way video chat and it's prevented it from happening because it's deemed my internet connection too slow - I wonder if it thinks wifi is too slow to start a connection as well? I've got a WRT54G wifi router.

Printer won't work using airport

I've plugged the epson nx400 into the airport base and my wife's laptop can print on it no problem. But my computer (running os 10.5.8) can't seem to make it work. The compuer finds the printer well enough and it is set for the express but when I go to print it does not show on the printer list. I've loaded all the newest drivers and I have it set for the correct printer (nx400 express rather than nx 400 usb. Any help woud be greatly appreciated.

Welcome to the discussions, Peyton!
Apple's troubleshooting guide offers a logical approach to try to get things going:
http://support.apple.com/kb/TS1253

Mac OSX install disc 1 won't work, it says "no bootable device" and a black screen

My macbook came already with snow leopard, so I have the osx install disc and the applications install disc. So I'm meant to put in the osx (ie install disc 1) install disc which lets me install bootcamp, which I do, and click on "start the windows installer" and "start installation" in bootcamp assistant, however every time I restart the computer to try installing bootcamp it just says in white letters across a black screen "no bootable device" and "insert boot disc", which I have already done!!
Am I missing something really dumb here, or is my disc faulty?

From this guide
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
Step 4: Install the Boot Camp Drivers for WindowsAfter installing Windows, install Mac-specific drivers and other software forWindows using your Mac OS X installation disc.
The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc.
You have to be running your Windows OS (not Mac OSX) when you add the drivers from the Mac Install disk.

My Mac Mini won't accept a CD or DVD. The first time it happened I went for support and read someones response. It said that the external CD won't work when a certain USB device is plugged in. I unplugged the device, it worked. I forget the device. Help?

Help!!!!

I'd get an AC powered USB Hub to plug them into...
http://eshop.macsales.com/item/Newer%20Technology/USB2HB7PRO/

Playback won't work using Mbox as audio device

Similar Messages

Maybe you are looking for