Playbar Buttons Not Available?

I seem to be missing something. I want to give my users the ability to move ahead using the forward and back buttons, but the skin editor will not let me select them. See the image below with the grayed out buttons.
Why is this happening? I cant find a navigation selection anywhere that I might have turned off or on. Can anyone help?

Sorry, do you have a Quiz? Normally it is not checked by default, you have to make that choice in Quiz Preferences:
It is improbable that you checked it since you don't know where it is.

Similar Messages

Delete button not available for goods receipt when PO has GR-Based IV set

Hi ll,
the delete button for confirmations is greyed out when the PO has the GR-Based IV set, the return delivery button however is available.
There are several goods receipt on the PO some of which have linked invoices but the goods receipt I want to cancel is not linked to an invoice.
I've checked the backend config and it's the same for movement types 102 and 122. Also I can manually post a 102 in the backend.
For PO's without GR-Based IV both the delete and return delivery buttons are available.
Does anyone have any ideas? We are on SRM 4.0.
Cheers
Chris

Hi,
thanks for the response but I don't think this situation is related to backend settings as I can perform a 102 and a 122 against the same PO l;ine directly in R/3.
This appears to be an SRM "feature".
To claifry the situation
PO flagged as GR-Based IV
Purchase Order line has several goods receipts and several invoice receipts matched.
Tryning to cancel a confirmation in SRM for a goods receipt without a matched invoice receipt.
"Delete" button is not available but "Return Delivery" button is available.
In R/3 backend I can post a 102 (delete) or a 122 (return) without any issues.
Config settings are the same for 102 and 122 in the R/3 backend.
Any one any ideas?
Cheers
Chris

Release button not available in Service entry sheet ML81

Dear All..
Release button is not available. while Creating Service entry sheet Through ML81. Any standard settings is Required.. ?..Pls. Give me the Details
Usefull Threads will be Rewarded..
REgards
Senthil

Dear Shentil,
You just get into ML81N and enter the doc no: then you click on the Change button . Now your data will be open to edit there you can find the option to release which looks like a flag.
Hope It helps you.
Thanks and Regards
Prabhul

UWL Approve and Reject buttons not available in Portal 7.31?

Hi I've been doing some research and came across some interesting articles...
http://scn.sap.com/thread/1871429
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=221611154
I am trying to enable the Approve and Reject buttons per customer requirements but having some issues making these options available in the UWL ...
Based on the articles above...
Does the UWL not support this ?
If it does, can anyone direct me on how to enable these ?
Thanks

After doing some research, it looks like the XML needs to be modified...
Can anyone confirm that the code is still relevant in 7.31?
<Action
reference="com.sap.pct.srm.core.action.approve"/>
<Action
reference="com.sap.pct.srm.core.action.reject"/>

Attachment button not available in Complaint

Hi All,
How can I attach files (eg. DOC/PDF) in complaint transactions?
In the Assignment Block in WebClient for Compliant transaction type that I don't have any button (upload document from Hard disk) available to attach files.
In the component GS_CM, those fields are there, but in the Webclient they are not.
Can anyone help me ?
Best Regards,

I think attachments comes under Attachement Assignment block.
configure your webui page for attachement asssingemblck
Hope this helps.
-Satish

Forward Button Not Available Until All Buttons Clicked in Slide

I'm attempting to create a slide where several buttons or rollover slidelets are available to the user. Each button/slidelet will need to be viewed before they are able to continue to the next slide.
For example, the slide has 3 button/slidelets on it which each represent a word. Each button/slidelet would need to be clicked before the user could proceed to the next slide.
How can I disable the forward button functionality on the playbar until each of the buttons/slidelets have been viewed?
Version : Captivate 4
Publishing : HTML

Hi there
There are a few different ways this might be accomplished. If your goal is to remain entirely in Captivate, you might consider configuring an Advanced Action to do the work for you. You could reposition the playhead upon entering the next slide based on a variable you set.
Alternatively, you could hide the Playback Controls until all the elements have been interacted with.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

SRM-SUS: "Create Invoice" button not available in "Confirmation"

A confirmation is created from SUS(702) and posted to ECC (607). Service Entry sheet is released in ECC.
Supplier unable to see the "Create Invoice" button in the confirmation. Please advise what could be missing here?
Is there any status update to Confirmation about the acceptance of service entry. I can see a Service-acknowledgement is posted into SUS but is not visible in the SUS portal.

Hi,
Did you check whether 'GR based IV' is clicked for respective vendor?
Regards,

Menu button not available

I cannot get to the menu button on my samsung galaxy 2 10.1 tablet. There is not a menu on the botton of the screen as many keep referring to either. Am I correct that customizing the app is just going to not be possible? Am about ready to give up and uninstall again.

Next steps: if the device does not have a 3 dot menu we need to file a bug and have qa repro.

Pause button not available in camera for videos

In xperia z2 pause not avaliable while recording videos. Due to which I am forced to record many clips. Other wise I have to record even not required seens to record in single clip. Even the low end phones are having camera pause button while recording videos and it is surprising to me that z2 not having it. I request sony not to forget some of the old features given in old phones carrying to the new phones.

I am sorry,contact xperia care about this:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Publish buttons not available to me

Hi-
Just got my first mac, and first web site launched over the weekend - to my own domain hosted by 1ana1. Tried to make some corrections today and they seem to have partially loaded then stopped. I got a successfully uploaded message though. Now further changes made, and keen/desperate to fix the site, but none of the publish site buttons or options are available to me. I cant figure out why... or how to get them. I can't publish to mobile me either.
Help greatly appreciated!

Catherine ~ Welcome to the discussions. To get the publishing options, click on the site name in the left side-bar.

Why is my execution highlight button not available?

All Debugging buttons are unavailable. they are unavailable in any Vi, even a new blank one. I have tried the following ideas without success.
Vi Properties, execution, Allow debugging is ticked, Rentrant execution is not ticked, and prioriy is not selected as subroutine. Any Ideas?

I can't think of anything that would cause this behavior. Try exiting LabVIEW, deleting your LabVIEW INI file (back it up first, of course) and restarting LabVIEW. If the debugging options work OK, then there's something weird in your INI file. At that point, try removing certain lines from it between exiting and restarting LabVIEW to determine what is causing the weird behavior.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Area values button not available in version ECC 6.0

Hi all,
We are changing from version 4.6 to 6.0. I noticed a small change on the layout in transaction FB05 or F-91.
I was able to see a box called u201CArea Valuesu201D on old version. Here you can post different values in each depreciation area for one fixed asset.
e.g.
Depre. Area........../TTy..../Amount posted
01 Book deprec.../100..../15
30 Group Local... /100.../10
But now in version 6.0 I can not see that button anymore.
If this button is gone for new version how can I change the amount posted for depreciation area 30.
In order to see the area values icon in version 4.6 go to FB05.
Posting key - 70
Account - Give an asset number
Transaction type - 100
Many thanks!

Hi,
It's ABAP work. It has to be done in SPDD & SPAU Adjistment.
Ask your ABAP Consultant to do that adjustment.
BR,
Darshan..

Software for control buttons not available in silent mode

Hi guys,
When we starting the setup in silent mode, does not include the software of control buttons.
There any way to select it in some config file to be installed by default in silent mode?
Thx for all!!!

The software is part of the Value Added Package
This package contains different software parts and important utilities like
- TOSHIBA Components Common Driver is an essential component of Windows. It is required to make the other TOSHIBA original programs work properly.
- TOSHIBA Power Saver controls power consumption by switching to optimum power settings, based on whether the machine is plugged in or on battery power, and based on the remaining battery power.
- TOSHIBA Utilities lets you customize your hardware settings according to the way that you work with your computer and the peripherals you use. To start the utility, click the Windows Start button and click Control Panel and select the TOSHIBA HW Setup icon.
- TOSHIBA Password Utility lets you set a password that restricts access to the computer.
- TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities.
- TOSHIBA PC Diagnostic Tool can display the basic information of a computer and diagnose
To be honest I never tried to install the VAP in silent mode but if you want to get the control buttons working in this unit, you will need to add VAP.

Why is my Publish button not available?

I am trying to publish a generator for FCPX (10.1.4) out of Motion (5.1.2). My OS X is 10.10.2. However, when I select the "Publish as a Final Cut Generator" option out of the selection box in Motion (see screen shot: http://screencast.com/t/3ybVCuzSq) the "Publish" button become unavailable. What am I doing wrong?
Thanks in advance for your help!

You need to select the dropdown under Template Name and select or create a category for the generator to reside in.

TS1424 Buy now button not available or obvious in Itunes?

Hi does anyone have an answer to the above question? I have for the life of me looked and cannot find a way to purchase my wish list, I'm sure there is usually a buy button but??? Any suggestions greatly appreciated.

Denise Illing wrote:
Hi can you be more specific please I have clicked into all parts of each track and all I can do is here the preview of the track there is no option coming up for me to buy? Sorry I've asked several others to also do the samething and no-one has been able to help. Is it an issue with Mavericks and Itunes perhaps? Thanks for your input still needing assistance though
Denise,
Go to the home page of the store and click on "My Wish List." That will open the wishlist. Then you will see that each item in your wishlist has a price, near the right side of each line. Click the price.

Playbar Buttons Not Available?

Similar Messages

Maybe you are looking for