Playbar hidden, but appears for 1/2 a second, then hides
Captivate 7, Win 7
Hi,
I want the playbar on during my project, except for the first slide.
I have turned off the playbar on my first slide via the Action-->On Enter-->Assign-->cpCmnsShowPlaybar, With 0.
However, when the project is played, the playbar shows for the first half second of the first slide, then disappears for the remainder of the slide.
It looked like it took the first slide a moment to 'realize' it needed to shut off the playbar.
Any ideas?
thanks!
Do you want the playbar to be hidden for all slides, or just for some slides? If you are on CP7.0.1 there is a dedicated command 'Hide Playbar as well'. But it is possible, because the project has to load, that you'd see the playbar for a small fracton of time.
If it is for the whole project, turn it off in Project, Skin Editor. Eventually turn off also the bottom border (or all borders) in that case.
Similar Messages
-
Started downloading CD library to iPod. Plenty of space remaining, but it quit syncing with my music/play list. Sync notification appears for only a few seconds then stops. Sync scroll bar on music/play list never starts scrolling. Any suggestions?
Which version of iTunes and which iPod Classic model are you using?
Have you tried to Reset the iPod and download again? -
Grandson Son sabataged my IPhotos! Can't get pics to appear. Only broken-line/square boxes where the pictures should be. Scrolling with side bar brings up pics for 1 or 2 seconds then they are gone again. HELP! Please....
RaefischRestore from your back up is the most obvious way forward.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work -
I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?
My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option). -
After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
How do I make the internal mic on my macbook air sustain better when recording on garage band? I have been recording an acoustic guitar and listening back, the mic seems to pick it up well naturally for 1 or 2 seconds then dramatically drop out.
I realised that you just need to go to System Preferences > Sound > Input > and uncheck 'Use ambient noise reduction'. mmm answered my own question.
-
Warning screen pops up for less than a second then disappears
After I upgraded to Mountain Lion, occasionally a warning screen with the yellow '!' pops up for less than a second then goes away. What does trhis mean, does anyone else have this problem?
Never seen it - never heard of it. Does it popup while you're using any particular application? Is it like a dialog box? It could be some third-party application trying to warn you... about something.
Clinton -
A Firefox Help page appears for a moment, and is then wiped, in FF4RC
I go to the Firefox Help Page 'Viewing video in Firefox without a plugin', and the body content appears for a few moments (on my Vista laptop), and then disappears, leaving only the Title,the Contributors line, a block of white space, the nurse pussycat image and text block. The stuff on the RHS is OK.
I get the same on this w7 laptop, except I don't see the proper page at all (possibly because this laptop is quicker?).
On 3.6.15, on both laptops, the page appears correctly, I think.
I guess my question is can someone who knows how to submit a formal bug report on FF4 see if they can reproduce this, and if so, then please submit such a report?
Or you could maybe tell me what I'm doing wrong; though as it fails on two separate laptops in FF4, and works on both in FF3.6.15, I don't think I am doing anything wrong.
I've added troubleshooting info below, obediently, but I doubt it's needed...I'll make a note of that in the correct forum about specifically stating when an article doesn't apply to Firefox 4.0.
-
BB 9320 - Screen goes black, LED light off and device unresponsive for a 3-30 seconds, then repeats
Hi there,
I got a BB 9320, then replaced it through the vendor for this same issue but it is still occuring.
When using my phone, fully charged or not, the screen will go black and LED light is off for a 3-30 seconds mid task and the device becomes completely unresponsive. It will eventually come back, and restart the task (ie, if i'm typing a txt messge, it will be back to the message inbox, or for an email back to my email inbox, etc.). It's really frustrating because at times it will continually happen for so long that I give up on using my bb entirely.
I have tried restarting the device to factory settings, removing the battery, keeping it continually charged, draining the battery entirely.
What is happening? How can I fix this??Hey makader,
Welcome to the BlackBerry® Support Community Forums.
I would suggest doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
http://btsc.webapps.blackberry.com/btsc/KB10339.
If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
Thank you
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Firefox crashed without even opening the main window - just the apology pop-up appeared. Nothing I could do would open the programme. MS Fixit identified a problem with IE8 and put it down to AVG8 Link Scanner. I disabled this, and tried Firefox again. It worked perfectly for a time. Later, when trying to open Firefox, nothing happened - no crash pop-up, no navegation window - zilch. I tried to re-install the programme, but as soon as I execute it, the "Extracting" pop-up opens then closes immediately. I tried to uninstall Firefox using the Windows control panel, but this did not work - Error 21, whatever that is, then tried to reinstall again with the same result.The Firefox uninstall did work. I unistalled my AVG8 anti-vir and tried again - nothing. I downloaded an older version of Firefox - same result. Something is blocking any activity concerning Firefox and I am totally at a loss to identify it. Can anyone help, please?
== This happened ==
Every time Firefox opened
== this afternoon - May 7th. 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729)1. Is there a "hung" firefox.exe process in the Windows Task Manager?
2. Have you tried restarting that PC? -
Isight works only for ~1/2 a second, then fades to dark
the administrator installed my camera for me, but when i try to start it, it doesn't last long enough to capture any images. some friends of mine have told me that it could be a driver problem, and have said i may be able to get some files from another MacBook.
Any ideas as to other causes; or where i may be able to find the file i'm missingDo you want the playbar to be hidden for all slides, or just for some slides? If you are on CP7.0.1 there is a dedicated command 'Hide Playbar as well'. But it is possible, because the project has to load, that you'd see the playbar for a small fracton of time.
If it is for the whole project, turn it off in Project, Skin Editor. Eventually turn off also the bottom border (or all borders) in that case. -
Notes:
- This does not happen in any other mobile browser or any previous iOS Safari. It happens both on the ios 7 ipad.
- i Have 150 inputs (my page size is over 400kb)Hello!
I have seen many people asking about this error and if you are a developer, check this answer at stackoverflow. It's a very simple workaround but it works perfect:
http://stackoverflow.com/questions/19335109/ios-7-safari-os-locks-up-for-4-secon ds-when-clicking-focusing-on-a-html-input/23606434#23606434
Don't forget to upvote the answer if you are a stackoverflow member
Best regards -
I have installed PS from the cloud twice now. It loaded without any errors but when I try to run it, it comes up fine with all the dialogs and everything but after 5 seconds it tells me the app is closing down without giving any error message.
I tried loading as admin and this did not work. I have added two images that show the error message and my computer configuration. I am running Norton Antivirus, could this be the problem?
I am running two other editing programs Flexi and Adobe Illustrator, other than that it is a new system running standard programs. -
Iphone 3g shows Apple screen for a few seconds then shuts down
Hey everyone, I've searched all over for a fix for this, but can't seem to find anyone who has had this problem answered. I was away for a while and didn't use my phone, when I got home today it froze up two or three times, so I put it into recovery mode and went through the normal steps of restoring from my last backup no problem. The phone seemed to backup fine and got was syncing my music/photos/etc. and I decided to go for a run. I came back 45 minutes later and it was shut down and not doing anything. When I went to restart it the black and white Apple logo screen popped up like normal for about 15-20 seconds then it shut down. It continues to do this no matter what I try. The only issue I can think of is that the battery was really low when I plugged it in for the restore, but it made it to the sync portion without a problem, so I'd assume it should have been charging.
I've gone through all the recovery/restore steps I can find on the net. I've tried removing itunes from my computer and reloading it, both just with the application only and then all the correlating files. I've tried restarting about 15 times, plugging into different USB ports and even using my brother's powerbook to restore it. When I plug it in it recognizes that it's plugged in and the boot screen comes up, but it shuts down before it's recognized by itunes.
Has anyone had this problem and overcome it? Does anyone have any input other then referring me to this page: http://support.apple.com/kb/HT1808 or trying to put it into DFU? It's out of warranty and if at all possible I'd rather not buy a new one. Thanks in advance for your help.I guess, putting it in recovery mode and restoring it "as new phone" is your only chance if you can make it. Restoring from a backup may copy corrupt files back to your phone, causing this problem.
-
Red light for about 3 seconds, then a white screen with a sandclock = continuous (8310)
Hey everyone. I'm new to this whole Blackberry talk, so I'll try to go into as much detail as i can with my problem!
I bought this from product from somebody on the internet. Well, my phone was just on my desk earlier today, working perfectly fine, when all of a sudden the screen became black, and the light at the top of my phone stayed red for about 3 seconds. The screen would then turn white afterwards and the sand timer would be there, and that would happen for about 5-10 seconds, then it would turn black and the red light would appear, then the white screen with the sand timer. Therefore it's repeating itself.
From what i've tried to understand, I have taken the battery out of the phone for a good amount of time, 15 minutes, and yet nothing. When i always put the battery back, it automatically goes to the black screen with red light.
I've also tried to push the reset button at the bottom left beside the battery, and that doesn't work either.
I don't have the slightest clue on what OS, and how to use the desktop manager either.
If someone can help me with this, I'd totally appreciate it!
Thanks!Here's a link to the basics:
http://crackberry.com/blackberry-101-how-lecture-series
look at 12 and 22
Let us know how it comes out!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
On Win 7 my books always appear on left side of screen making it very convenient. On my Win 8.1 laptop I can't seem to make that happen. Thank you, Peter
-
Listening to Ipod Shuffle with Windows or other media player
Is there any way to listen to an Ipod Shuffle through any computer without the use of the Itunes software, like through Windows Media Player, Real player or Quicktime, simply by attaching the shuffle to the dock and usb port as a "removable hardware
-
I have a photosmart D6160 and the inks have all been replaced - However the symbol for 'OUT OF INK' keeps flashing and no matter what i do it will not print - Please help before I go bald xx
-
What has happened with Apple Support?
I convinced my friend to purchase a refurb Macbook Pro last week. I explained "the same warrenty, I've purchase 3 refurbs with no problems, yada yada". His MBP shows up with a "5th leg" under the Superdrive! Dented from the inside out. We found this
-
IDoc PI SQL - Still waiting acknowledgement
Hi all, I have a problem in production with hundreds of messages. The sales order interface (which runs around 200 times/hour) got stucked after an error in a INSERT statement. Interface IDOC > PI > SQL Then the PI monitor shows the success flag but