Playbar Navigation between Modules

I have set up an Aggregator Project with Captivate 5.5, where I have linked up several Modules/SWFs.
When I click the Next Button at the Playbar, I can only jump to the next slide within a Module, but not to the next one. This makes it look like an error.
Is there a way to navigate with the playbar also between Modules?

This is actually the way that Aggregated projects work. You need to use the aggregated TOC to jump into a different module.
The Next button on the playbar will stop working once you reach the final slide of each module. Your Project End settings for each published module should be to Stop Project (not Close Project). Then you will find that when the final slide is finished, the aggregator will automatically continue on to load the next module, and then the Next button will again work to allow you to continue navigating.

Similar Messages

Navigation between different componets in IC Web Client for CRM 7.0

Once the user click save button in component ICCMP_BT_BUTTON I need to navigate to component ICCMP_BT_SVO that displays the Service Order Data and display the new Service Request that was created.
How can I do navigation between different componets in IC Web Client for CRM 7.0?
Thanks.
Rodolfo Miã

Hello,
You can find detailed presentations in the learning maps available on the SAP Service Marketplace http://service.sap.com/rkt-crm for release CRM 2006s, CRM 2007, or CRM 7.0. In case I didn't mention it before, Intent-Driven Interaction (IDI) was first introduced and is only available starting with CRM 2006s and above. In the Interaction Center area, there is a presentation called "Rule Based Automation and Guidance" which covers IDI. I'm not sure if you can access the URL directly, but just in case here it is: [https://websmp104.sap-ag.de/~sapidb/011000358700001162852007E].
Warm regards,
John

How to navigating between layers?( as if they were pages of a book?)

I need a good advice on design and navigating between some different layers.
I am a Adobe Director user, and I am used to think of “navigating between frames”. also frames as pages of a book, while in flash time-frames.
In Director one can navigate between different frames with each containing many components.
And this does not make any conflict since the frames are some kind of pages of a book, you go to any page you want and back again.
I am designing math training application in falsh-CS6, in which the user should be able to navigate from start-menu by choosing an
exercise number and then go to the wanted exercise and then create an exercise by a create_excercise button, there back again to menu to choose another and so on. How I can do it clean in flash?
As I see I have to place everything in the same “frame” in flash, and it becomes little practical and confusing since there
are many things all gathered in the same frame, where they should instead appear in their respective “pages”.
I have done some works in flash: made 4 layers in flash with the following contents:
layer 1: for my menu( contains 3 buttons, q1bt, q2bt, q3bt)
layer 2: for question 1( contains 3 buttons makeQ1bt, chekAns1bt, and gotoMenuBtn)
the same is for layer 3 and 4.
I see no options rather than making different components visible or invisible whole way! but is there a better way?
I appreciate any help.

Flash does allow more than one frame - that is one of the foundations of working with it. You can restrict yourself to using just one frame if you like, but it is not required and very often people use the timeline instead of keeping things in one place.
I have no familiarity with Director, but what you just described sounds like designing using the timeline of Flash. With Flash you can use the timeline in the fashion you just described where different pages occupy different frames of the timeline and you can navigate from one to another. You are not stuck with one frame in Flash... you can create a new keyframe at any point along the timeline and add new/different content to it, while retaining a menu that exists across all pages (or not - it's your choice)..

Navigation between records in a JSP application

Hi,
I would like to know how to provide navigation between records in a tabular form liked JSP application using JDeveloper 3.2
without using the Oracle or Default template.
I can do it with a singular record view but not in a tabular view. I like to know now I can mimic the navigation provided in Oracle template in which the current selected record is hightlighted. Can we navigate between records using Up and Down
arrow key like in Oracle form instead of using Navigation Bar. Please provide details code.
Thanks a bunch,
Khanh Hoang

You can refer to the source code in jbohtmlsrc.zip for deriving your own implementation.

How to define the dynamic navigation between two component in web ui

Hi All,
I have a requirement to create a new assignment block in accounts overview screen .
1.Created new view(Table view) in the BP_HEAD component.
2.Created new button on the table view toolbar .
3.If the user clicks the new button it should navigate to interaction log component(BT126H_CALL).
Please hekp me step 3 how to do .
I have checked planned activity assignment block in the account but is dynamic navigation.
Please explain me how to define the dynamic navigation between two components.
What is window delegate .
Thanks,
Venkyy

Hi ,
Kindly follow the link , this will be helpful for your issue :
http://wiki.sdn.sap.com/wiki/display/CRM/CRM-NavigatingtoyourcustomBSP+component

Large number of http posts navigating between forms

Hi,
i'm not really a forms person (well not since v3/4 running character mode on a mainframe!), so please be patient if I'm not providing the most useful information.
An oracle forms 10 system that I have fallen into supporting has to me very poor performance in doing simple things like navigating between forms/tabs.
Looking at the java console (Running Sun JRE 1.6.0_17), and turning on network tracing, I can see a much larger number of post requests than I would expect (I looked here first as initially we had an issue with every request going via a proxy server, and I wondered if we had lost the bypass proxy setting). Only a normal number of GETS though.
Moving to one particualr detail form from a master record is generating over 300 post requests - I'v confirmed this looking at the Apache logs on the server. This is the worst one I have found, but in general the application appears to be extremely 'chatty'
The only other system I work with which uses forms doesn't generate anything like these numbers of requests, which makes me think this isn't normal (As well as the fact this particular form is very slow to open)
This is a third party application, so i don't have access to the source unfortunately.
Is there anything we should look at in our setup, or is this likely to be an application coding issue? This app is a recent conversion from a forms 6 client server application (Which itself ran ok, at least this bit of the application did with no delays in navigation between screens).
I'm happy to go back to the supplier, but it might help if I can point them into some specific directions, plus i'd like to know what's going on too!
Regards,
Carl

Sounds odd. 300 Requests is by far too much. As it was a C/S application: did they do anything else except the recompile on 10g? Moving from C/S to 10g webforms seems to be easy as you just need to recompile but in fact it isn't. There are many things which didn't matter in a C/S environment but have disastrous effects once the form is deployed over the web. The synchronize built in for example. In C/S calls to synchronize wasn't that bad; But when you are using web deployed forms...each call to synchronize is a roundtrip. The usage of timers is also best kept on a low level in webforms for example.
A good starting point for the whole do's and dont's when moving forms to the web is the forms upgrade center:
http://www.oracle.com/technetwork/developer-tools/forms/index-095046.html
If you don't have the source code available that's unfortune; but if you want to know what's happening behind the scenes there is the possibility to trace a forms session:
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/tracing002.htm#i1035515
maybe this sheds some light upon what's going on.
cheers

Transaction Code to see the integration points between modules

Dear Gurus,
I came to know that, there is a trnsaction available in SAP ECC to see the integration points between modules.
Eg. PP-MM & MM-PP
If anyone found pls post it here.
Regards,
Siva.

HI Siva
Plz tell us from where you came to know, since we all havnt yet got that Tcode.Its various settings and configurations and Masters which intergrate the various Modules like PP SD FI CO etc.
BTW
For PP-SD
Availability Check in Material master,MTO Scenario-MRP Run, thru Sales order
PP-MM
Material Master ,Goods movement ,STO, Reservation , Purchase Requisitions, Purchase orders , MRP Run
Quota arrangements etc
PP HR
In work Center capacity
PP QM
QM view Inspection type for each type of material
PP CO
Activities Confirmations COPA
PP PM
Euipment master, workcenter euipment
I hope it is clear to you now
Regards
Anupam Sharma

Rc.conf: difference between MODULES=() and MOD_BLACKLIST=()?

Is there any difference between
MODULES=(!foo)
and
MOD_BLACKLIST=(foo)
I just think that maybe the MOD_BLACKLIST could be ripped out of rc.conf and only use MODULES=() with a ! to disable a module like in DAEMONS=() to clean it up a little bit, if those 2 are the same...
Of course there is a difference, since MOD_BLACKLIST can't load modules, but all the functionality of MOD_BLACKLIST can be done by MODULES, right?

keeping only MOD_BLACKLIST wouldn't be good since you can't manually load modules then, but only NOT load them.
with only keeping MODULES it would be more like DAEMONS: you can specify the stuff to load AND you can prevent stuff from being loaded by putting a ! infront of the name.
but hwdetect would have to be rewritten to use MODULES and since hwdetect comes from tpwoa and he uses MOD_BLACKLIST, my guess is that this is not going to happen
as seen in this thread there are some people that like the MOD_BLACKLIST and they wouldn't be happy when they'd have to put the stuff into MODULES, so you can't make everyone happy.
I just thought that it doesn't really make sense to have two almost identically things in the rc.conf as it keeps all the other stuff so simple with ONE place to edit most of the system stuff in one file and imho the two ways of preventing a module from being loaded in the else so simple config file doesn't really fit in.
I don't have a problem with both arrays staying since I don't have to look at them all the time but it just feels weird to me.

Error while changing between modules

Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
Julia

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Navigation between portlets

I am using JSR168 portlet API.how to navigate between portlets

Hi,
Navigating between portlets on the same page or between portlets on different pages ?
Could i know for what functionality you want to have navigation between portlets ?
Please let me know.
Thanks
<Neeraj Sidhaye/>
Try_Catch_Finally AT YAHOO DOT COM
http://ExtremePortal.blog.co.uk

Retaining values when navigating between subtabs

Hello everyone
I have a subtab region with 3 tabs in my page. I have some form fields in each tab, when I enter some details in tab1 and click tab2, and then come back to tab1 , my details previously entered in tab1 gets cleared. is there a way to retain these values when navigating between subtabs. all the tabs are based on different VO's
Thanks
Ravi

Here's how I do it...
(1) I always use Sessions. In the main form of my application, I set up the session and I store a single variable: Session.Exists = True. All other forms begin something like this: (It's actually an include-file.)
<cflock ...>
<cfset SessionExists = StructKeyExists(Session, "Exists")>
</cflock>
<cfif NOT SessionExists>
<cflocation ... send 'em back to the home 'cuz their session has expired>
<cfabort>
</cfif>
(2) Now that we know that a session exists, we store various structs in the Session to contain the default or current values that have been used in a particular form. If the Session scope does not contain a particular struct, it is automagically created with appropriate default values.) This becomes "what we display," and when we capture the user's responses, we store them there, even before we validate them. The session pool therefore becomes the vehicle for communication between the various forms.
(3) If we reach a point where a particular piece of information is no longer useful, we delete the appropriate structure from the Session, thereby wiping out the entire set of values at once.
(4) Structs and Arrays can, of course, contain other Structs and Arrays. You can build data structures of arbitrary complexity.
(5) As of late, I have found myself specifying individual CFCs for each logical "object" in my application. This is true object-oriented programming, as best as ordinary CFC techniques can do without plunging headlong into the underlying nether-world of Java. In those CFCs, I deliberately try to conceal just how information is maintained and stored, so that these necessary inter-dependencies within my application are concentrated in just one place. "The structure is 'the object,' and the methods are found 'here and only here.' "

How to remove white fade while navigating between pages?

I created small web page with 4 buttons which each of them leads to other page eg., Home,Gallery, Contacts,Reviews, but when i'm navigating between them there is annoying white flash! Is it possible to remove it?
P.S. I uploaded my site to businesscatalyst Home
Thank you!

That is so strange, I just tried on my OS X Safari and WIN 7 Chrome and everything just fine, but when I'm trying on same OS X Chrome it has white flash while transitioning through navigation. Thanks anyway mac_heibu!

An error occurred while trying to switch between modules.

Everytime I want to change to the new book modul, I got this error "An error occurred while trying to switch between modules." Only with the book modules, the others work great! I installed lr4 new - nothing changed... and help?

Have you tried booting from the Win7 installation DVD doing a Startup Repair?

Differance between module pool & report programming

hi can any 1 tell me what is a big difference between module pool & report programs why is the need of module pool if we can do all the things with report program, please tell me technically how it behave
Please search for available information before posting
Edited by: kishan P on Sep 6, 2010 11:22 AM

Hi, Ashwinv
Welcome to SCN
Please Search Before Posting any More
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Differences between Module Pool Programming and Reports and Scripts

Hi,
please tell me the Differences between Module Pool Programming , Reports and Scripts .
Thanks nad Regards ,
PavanKumar

Hi
Type 1 - is a report programming it can be executed by both transaction and program (F8). Hence its is also called as Executable program.You can start logical databases together with reports.
Type M - Its a module pool program which is executed only by transaction code.
Scripts - report with GUI interface. we can have graphics, watermark .
SAPscript is a client dependent one.the Transaction for script is SE71.

Playbar Navigation between Modules

Similar Messages

Maybe you are looking for