Playbook crashes network when using 80211N networks

Hi. I am having issue getting my PB to work correctly on 80211N networks. I have tried with both a generic DLink router and a brand new LinksysWRT310 router. My configuration is Siemens SE567 Modem/Router with an uplink to my Wifi/Lan network. When I am running Mixed mode (B/G/N) all my other devices have been working flawlessly. As soon as I put the PB into the mix, it causes outages across the network and begins dropping constantly. Impossible to use. If I throttle it back to mixed (B/G) there are no more issues.
Things I have tried:
Delete connection competely and reset manually (i.e. setup fixed IP and gateway)
Tried WPS on Router and PB.
Tried downshifting from WPA2/Personal to WPA/Personal
Throttling MTU down to 1356 from 1500, and Changed the beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306
Turned off Wifi firewall
None of these has resulted in any greater stability.
Here is a copy of my logs trying to use the N connection. Any assistance is appreciated.
Wi-Fi Diagnostics Logs
INTERNET CONNECTION
> IP Address: (personal info removed)
> Subnet Mask: (personal info removed)
> Default Gateway:(personal info removed)
> Primary DNS:(personal info removed)
> Secondary DNS: (personal info removed)
> Domain Suffix: XXXY
> MTU: 1500
> Proxy Server:
> Proxy Port:
WI-FI INFORMATION
> Status: Connected
> Failure Reason:
> Profile Name: XXX
> SSID: mcduncan
> Channel: 11
> AP MAC Address: c0:c1:c0:0f:d9:76
> Security Type: WPA2 Personal
> EAP Method:
> Signal Level: -69 dBm
> Connection Data Rate: 65 Mbps
> Network Type: 802.11g/n
DEVICE INFORMATION
> Physical Address: 14:74:11:33:1b:72
> Device OS: BlackBerry PlayBook OS
> Device Pin: 5011BFA6
> OS Version: 2.0.0.7971
Supplicant Logs
> 20:48:30: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:48:30: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:48:30: <2>Associated with c0:c1:c0:0f:d9:76
> 20:48:30: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:48:23: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 20:48:13: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:48:10: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:48:06: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:48:06: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:48:06: <2>Associated with c0:c1:c0:0f:d9:76
> 20:48:06: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:47:54: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:41:58: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:41:58: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:41:58: <2>Associated with c0:c1:c0:0f:d9:76
> 20:41:58: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:41:42: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:38:02: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:38:02: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:38:01: <2>Associated with c0:c1:c0:0f:d9:76
> 20:38:01: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:37:51: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 20:37:41: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2412 MHz)
> 20:37:41: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:35:08: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:35:08: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:35:08: <2>Associated with c0:c1:c0:0f:d9:76
> 20:35:08: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2412 MHz)
> 20:26:12: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:25:52: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:25:52: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:25:52: <2>Associated with c0:c1:c0:0f:d9:76
> 20:25:51: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:25:13: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:24:29: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:24:29: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:24:28: <2>Associated with c0:c1:c0:0f:d9:76
> 20:24:28: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:24:18: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:23:44: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:23:44: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:23:44: <2>Associated with c0:c1:c0:0f:d9:76
> 20:23:42: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:23:31: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:18:49: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:18:49: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:18:49: <2>Associated with c0:c1:c0:0f:d9:76
> 20:18:49: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:18:14: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:17:14: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:17:14: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:17:14: <2>Associated with c0:c1:c0:0f:d9:76
> 20:17:14: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:17:03: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 19:59:14: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 19:35:16: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 19:35:16: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 19:35:15: <2>Associated with c0:c1:c0:0f:d9:76
> 19:35:15: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 19:35:04: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 18:59:18: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 17:59:18: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 16:59:21: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 16:53:49: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:53:49: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:53:48: <2>Associated with c0:c1:c0:0f:d9:76
> 16:53:48: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:53:37: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:53:16: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:53:16: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:53:16: <2>Associated with c0:c1:c0:0f:d9:76
> 16:53:16: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:53:12: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:52:47: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:52:47: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:52:47: <2>Associated with c0:c1:c0:0f:d9:76
> 16:52:47: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:52:40: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 16:52:30: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:52:27: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:52:20: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:52:20: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:52:20: <2>Associated with c0:c1:c0:0f:d9:76
> 16:52:20: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:52:08: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:51:44: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:51:44: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:51:44: <2>Associated with c0:c1:c0:0f:d9:76
> 16:51:43: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:51:17: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 16:51:07: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:51:04: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:51:03: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:51:03: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:51:03: <2>Associated with c0:c1:c0:0f:d9:76
> 16:51:03: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:49:23: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:07:40: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:07:40: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:07:40: <2>Associated with c0:c1:c0:0f:d9:76
PING
****** 20:36:15 (ping -c4 -n 192.168.1.254)
> round-trip min/avg/max = 11/54/138 ms variance = 3487 ms^2
> 4 packets transmitted, 4 packets received, 0% packet loss
> ----192.168.1.254 PING Statistics----
> 64 bytes from 192.168.1.254: icmp_seq=3 ttl=64 time=19 ms
> 64 bytes from 192.168.1.254: icmp_seq=2 ttl=64 time=138 ms
> 64 bytes from 192.168.1.254: icmp_seq=1 ttl=64 time=51 ms
> 64 bytes from 192.168.1.254: icmp_seq=0 ttl=64 time=11 ms
> PING 192.168.1.254 (192.168.1.254): 56 data bytes

Sorry, I can't tell help you. You seemed to have done all the correct steps. There have been other posters having the same problem as you with 802n. You can do a search to see if you can find the post. You might also check out crackberry.com. In looking over your log, it looks like authentication failure. I have found that to usually mean there is a miss match of settings when setting the security protocols. In other words there may be a protocol you are using with 802n that will not work with your system. If you change that protocol setting if you have a choice, it may work. If you do have success, report back as to what you found.

Similar Messages

Need a secure network when using iPad

I have a iMac with an airport extreme card built in. I use a Westell 7500 DSL modem to connect to the internet. The modem has wireless capability. I can establish a wireless network using airport. I went into network preferences and set up WPA2 Personal security and entered a password under the network I am using, but the network is not password secured. When turning on aiport on the iPad, I join my network without having to enter a password. I want to have to enter the password on my ipad when using this network so I am sure others in the area will have to know the password to have access to my network.
Thank you

According to the information you provided, you want to add a security password to secure your network.
Your wireless network is created on your Westell 7500. So if you want to add a password to secure your network, you have to add it on the router settings, not on the iMac settings. If you're not sure how to do that, you have to contact your ISP (internet service provider) for further assistance.

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

Iphone 4s getting hot up when using the network. is it a sim problem

iphone 4s getting hot up when using the network. is it a sim problem or battery problem?

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Cannot receive calls when using Edge network for data?

Hi,
This afternoon someone was trying to reach me urgently and all her calls to my iPhone went straight into my voicemail. My phone never rang and never showed missed calls.
I spoke to Aaron at Apple, thinking there might be a problem with my phone, and he told me that when the Edge network is in use, then the phone will not ring and calls will be routed straight to voicemail.
Is this really expected behavior? I was not aware of it.
iPhone 8GB

This has nothing to do with EDGE all other phones will notify you and pause the connection. i posted about this 2 days ago but the thread got deleted.
here is a video that proves this, the noise is from the GSM but the user is clearly on the edge network.
http://youtube.com/watch?v=NMm2AY-_TTY
this is from Tier 2 suport at Apple.
Everyone having this issue should call 1-800-MY iPhon. Ask to speak to Tier II support, the person you get may try to help, and may need to give you a case number. You'll probably have to wait a while on hold.
I just spent an hour on the phone with Tier I & II. The tier I guy started by saying that when you use EDGE it will always go to voicemail. I told him, I was on a user forum & some people said they don't have the issue. He then tested it on his phone & experienced the direct to v-mail issue. We talked about how this was a real problem & how both of our nokia phones didn't have this issue (he actually had the E-61 also). He gave me a case number & transferred my to tier II. The tier II guy told me that this was a software issue. That a pop-up needs to be designed into the software to allow the user the option to disconnect the data connection & accept the voice call, or not. I told him that I'd read on a user forum that some users get voice calls while using EDGE. He said that if they are using you tube the call will automatically interrupt & switch out of you tube. We then tested this on my iPhone & it worked (i.e. the call interupted you tube). He said the software currently decides to disconnect data or send calls to voice mail during EDGE transmissions based on what the user is doing. Phone calls take priority over you tube & widgets (stock & weather)but safari and e-mail take priority over phone calls. He said the thought was, it would be more annoying to users to be in the middle of sending an e-mail and having mail disconnected for a phone call, than having the call go to voicemail. The ideal solution is to have a choice (like other phones allow) but right now the iPhone software does not have a pop-up designed allowing the user to accept the call or keep the data connection. (He seemed to be familiar with this on other phones while being tethered to a macbook to use their data connections & getting voice calls during downloads).
He said he was submitting this to the engineering group & said the more people that call tier II about this & submit it as an issue via online feedback, the higher priority it will get to be addressed in the first software update. So if you want to see this fixed start calling and submitting the issue http://www.apple.com/feedback/iphone.html in as much detail as possible (specifically say that other existing phones Nokia S60s etc. have this function).
and here is a thread that is discussing this serious problem. note it is now many pages long.
http://www.howardforums.com/showthread.php?t=1197377

How do I airplay to apple TV when using Cellular network?

I want to be able to send my netflix video to my apple tv when im using the cellular network. Can this be done? I have an out of town property that I stay at sometimes and I do not have internet access there except on my iphone. So if I bring my apple tv with me I want to be able to stream movies to it using the 4g cellular network.

Unfortunately, you must be on the same wifi network to use airplay. This setup will not work.

Ibook G4 having problem with airport connection when using secure network

Hi,
I am currently using a brand new Macbook. I am connected wirelessly to a Comcast network through my Netgear Wireless-N 150 router model WNR 1000. The problem I am having is with the 4 year old ibook when I go to use the airport and connect to my existing network it says the password is incorrect. I spent time troubleshooting this with Netgear and basically we found out that the ibook does connect with the network when there is no security at all.
I erased the hard drive on this ibook to prepare it for sale and it is back to the factory settings. Is there some kind of firmware or drivers I am missing to use the airport as described?? I want to be able to show the buyer that the internet works etc. I also may want to install a few things on the ibook before the sale.
Thanks a mil
Message was edited by: omshanti

Did you reset the wireless router to see if by default, it has a different
wireless security then, than however it presently is set up?
The question you pose appears to be marked "answered or solved."
When you reinstall an OS X, the setup asks if you have an existing
wireless connection, or if you will be getting a new one; by default,
the setup will make the existing one the automatic one for OS X.
You should not have to add passwords or other, unless there has
been one set in KeyChain or for the specific wireless base in question.
Tiger 10.4.x does not require you to have a set password for wi-fi,
but you will find several levels of secure options available in OS X.
Not sure why your setup and configuration is problematic. Usually,
a totally new OS X installation is without issue. Sometimes, you
may have to administer a base station via Ethernet cable before
some configurations can use it, but an existing network should be
easy, unless it already has a password security in place.
The Mac will work without a password-protected wi-fi internet source;
often it will 'just work' even when moved to a new environment and
a neighbor's network, if not password protected, will appear among
other options in your vicinity and it will be automatically available.
Not sure if any newer OS X update parts, from the Combo update
files to take Tiger 10.4 to 10.4.11, plus others, would help the Mac
connect better to whatever wireless source of internet available.
I've not had that issue, as you state, except for when someone has
a protected network or passwords in place. Mine has passwords to
keep unauthorized neighbors from easy access; just in case.
In remote locations where few neighbors exist who could access wi-fi
from a lone source, no wireless security settings at all, work just fine.
I've done that; and found a little greater range was gained in signals.
And in the city (largest town in state) a computer I'd set up for use in
a password protected wi-fi network - later worked fine and found the
new owner's own wi-fi network without issues; and I had let the OSX
setup assistant do its job. If a local network is protected by WEP or
WPA2, etc with a password, one would be needed to access it. If not,
then the connection should be automatic.
Good luck & happy computing!

How do you update playlists when using a network itunes folder ?

I am trying to use a Network storage drive to keep my itunes libary on,the two problems i have are that even though the network drive is selected the playlists don't seem to be saved to the drive when i make new ones and also when i reboot the mac it defaults back to the local itunes folder.
Thanks
Matt.

Yes, the files get bigger and take up more room.Will you notice a difference on Apple's earplugs, no...played through a home entertainment system is a different result. I have found the best sound and file size/hard drive space usage to be encoding music files in ACC 192 kbps.

Problem on loading DAT file when using 3G network modem

Hello,
I'm having some strange problem when I'm trying to load my game on the part where DAT file with Map Object is read, using 3G Network Modem. This issue started when I migrated my applet from one host to another. Everything loads well, until the user authentication. On user authenticatiom I'm recieving map name which I should load and show the user on it. I'm recieving the message where map name is mentioned, but after, when the process of loading map begins(when I need to read DAT file which is only 15KB) application blocks(browser and JVM also block).
I thought it could be because of slow network communication, but it's not the reason, since I have tested(using Bandwidth limiter software) with 5 KBs/Second and it loads well and application is running well.
Any clue why this can happen? If code is needed I'll post some pieces related to the process of map creation.
URL or application: [ http://mimosa.dei.uc.pt/serhiy/demo/hoonline.html|http://mimosa.dei.uc.pt/serhiy/demo/hoonline.html]
Accounts: test01/test01 ... test0n/test0n ... test05/test05 (n is number from 1 to 5)
Thanks in advance!

You have to upload it with FileReference.upload() to a PHP
(or other server-side) script which saves it to a folder on the
server. When the DataEvent.UPLOAD_COMPLETE_DATA event has been
dispatched you can then use the FileReference.name to load from the
file on the server just like any other image.

Why does my mac use the wireless network when the wired network (faster) is available?

My mac is connected to my gigabit wired network, but insists on using the (decidedly slower) wireless network. When I connect the ethernet cable, I can see that Ethernet moves to the top of the list in my network options... but investigation using the Network Utility shows that all the data is still transferred over AirPort unless I disable it. That shouldn't be necessary.

Do you NEED Airport and Ethernet on at the same time?
Like @PAHU said you can use Locations to set up a different connection and/or network when you only need the Wireless.
Setting a "Location" is an excellent way to separate the networks. If you use a "Location" for DSL/Cable and another for "File Sharing" then you can set up which "connection" you want to use and can turn off the others. Or a wireless OR wired Network.
If you also go to the left side of the Network window and select Airport and turn it OFF and you won't have to worry about it anymore. You will have to set each "connection" for each "Location".
I have all my computers hooked to a wired Gigabit switch and the Wired/Wireless router is connected to that. I have "Ethernet-DSL", "Wireless DSL", "DSL OFF", "Wireless Games", "Ethernet Games" (also for file transfers between computers) all on different networks. Takes all of 5 seconds to switch back and forth.

Mac OS X crashes often when using Preview,Adobe Photoshop,Pixelmator....

When I work with Preview ,Photoshop,Pixelmator Mac crashes and again reboots. This happens very often like 3 times in 20 minutes.
But sometimes it doesnt happen it works normal for a long period and suddenly crashes.
I happened in Lion OS X so I upgraded to Mountian Lion OS X but still the problem remains
I did Verify Disk then i got
Verifying permissions for “Macintosh HD”
Group differs on “Library/Java”; should be 0; group is 80.
Permissions differ on “Library/Java”; should be drwxr-xr-x ; they are drwxrwxr-x .
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/CoreGraphics”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Resources”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Versions/Current”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Permissions verification complete
Please kindly someone me solution or direct to the thread with this problem
Muhil

No, Mac crashed again when i opened Pixelmator
And got following report
Interval Since Last Panic Report: 38834 sec
Panics Since Last Report:          19
Anonymous UUID:                    2B96FF86-3454-406B-AD1F-5FA46A908E0B
Tue Sep 4 11:00:10 2012
panic(cpu 1 caller 0xffffff7f85761c85): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80a44a0000 0x0a5480a2, D0, P3/4
Backtrace (CPU 1), Frame : Return Address
0xffffff8080913220 : 0xffffff800501d5f6
0xffffff8080913290 : 0xffffff7f85761c85
0xffffff8080913320 : 0xffffff7f8585b5b7
0xffffff8080913380 : 0xffffff7f8585b62b
0xffffff80809133f0 : 0xffffff7f85b70883
0xffffff8080913530 : 0xffffff7f8588175d
0xffffff8080913560 : 0xffffff7f8576b9e6
0xffffff8080913610 : 0xffffff7f857670b8
0xffffff8080913800 : 0xffffff7f85767b3a
0xffffff80809138f0 : 0xffffff7f869bac51
0xffffff8080913940 : 0xffffff7f869b7fad
0xffffff8080913980 : 0xffffff7f869b61a5
0xffffff80809139b0 : 0xffffff7f86966fef
0xffffff80809139d0 : 0xffffff7f8697a78e
0xffffff80809139f0 : 0xffffff7f8697d88a
0xffffff8080913c00 : 0xffffff7f8697daf4
0xffffff8080913c20 : 0xffffff80054638ef
0xffffff8080913d70 : 0xffffff80050981a1
0xffffff8080913e80 : 0xffffff8005020abd
0xffffff8080913eb0 : 0xffffff8005010448
0xffffff8080913f00 : 0xffffff80050195fb
0xffffff8080913f70 : 0xffffff80050a5ad6
0xffffff8080913fb0 : 0xffffff80050ced13
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f856fa 000->0xffffff7f859fcfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8566f000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f856e6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f856a3000
         com.apple.nvidia.nv50hal(8.0)[9CD95A4A-FD94-349E-A4B6-FC3B74E197F5]@0xffffff7f8 5a0a000->0xffffff7f85d2cfff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f856 fa000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8566f000
         com.apple.GeForce(8.0)[91C40470-82BA-329A-A9D7-4C70F28275FD]@0xffffff7f86961000 ->0xffffff7f86a23fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f856 fa000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f856e6000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8566f000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f856a3000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x0000000004e00000
Kernel text base: 0xffffff8005000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1841440316782
last loaded kext at 34272661651: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f871ab000, size 36864)
last unloaded kext at 225144607169: com.apple.driver.AppleUSBUHCI          5.1.5 (addr 0xffffff7f86023000, size 65536)
loaded kexts:
com.eltima.ElmediaPlayer.kext          1.0
com.logmein.driver.LogMeInSoundDriver          1.0.0
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.0f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.driver.AppleMikeyDriver          2.3.0f2
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleIntelHDGraphics          8.0.0
com.apple.driver.AppleIntelHDGraphicsFB          8.0.0
com.apple.GeForce          8.0.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AirPort.Brcm4331          601.15.21
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.21)
Bluetooth: Version 4.0.9f8 10405, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9SA02, 320.07 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

FLASH 9 CRASHES IE7 WHEN USING WEBCAM

Evey website that uses flash to broadcast your webcam,
crashes ie7 when you try and open your webcam. I have upgraded to
the new beta and evern rolled back to v8 and it still does the same
thing. anyone else having this issue? below is the error signature
i get from windows when it crashes:
App name: iexplore.exe
App ver.: 7.0.6000.16512
mod name: vcam.ax
mod ver: 0.0.0.0
offset: 00003AB5
Text

I'm having the exact same issues, and my Veo webcam works in
all other software / chat sites that don't use Flash player. So, is
Flash player even detecting the Camera ? I have used this same cam
in earlier versions of Flash player, what seems to be the
compatiblility issue ? Also, I will trace to see what version it
worked successfully.

Crash/lock when use special symbol palette in iDVD 6

I tried to use the special symbol palette to try to insert special language characters in the comments on a picture in a slide show. On choosing special symbols from the menu line (Edit) all seemed to be fine until I tried to choose another category of symbol from the palette.
At that point the symbol palette goes blank or only part of the information is visible and I can not close or move it. Often iDVD also locks and I have to force the application to quit.
After that, the blank symbol palette keeps popping open (then closing) when working with other applications. Cold restarts do not cure the problem. Only solution I have found to stop the annoying pop up of the palette is to delete the file in user preference (com.apple.CharPaletteServer.plist)
I try to do the same operation again with the same results. Do not know if this is a new problem or long standing since I had never used the palette before with iDVD. I can clear the created problem with the hanging palette, but the palette is esentially unusable. Character palette seems to be ok when using it from the international keyboard menu.
(The reason to try to use the palette was I could not paste names in a language that do not use Mac's standard diacriticals. Why is there no font menu choice or ability to paste a name from another application that has font menus?)

Wow-totally missed that-sorry. I guess i assumed that you didn't do that because that is about the only thing that I know of to fix it.
I guess you could try Validating fonts
http://docs.info.apple.com/article.html?path=FontBook/2.0/en/fb1003.html
I'm out of ideas...but, I am certain that others will show up that have other ideas though.
Sue

Playbook locks up when using Blackberry Bridge

Playbook OS:
1.0.7.2670 Build 52084
Blackberry Torch 9800:
6.0 Bundle 2647
Blackberry Bridge 1.0.4.9
I have an issue where my Playbook will freeze when I enable (connect) via Blackberry Bridge. It will initially connect with no problems, but the moment I try to respond to an email from my Playbook, the Messages application will stop responding then all the applictions in the Blackberry Bridge section will not respond, then the Playbook will stop responding alltogether. I figured upgrading to the new build of Blackberry Bridge on my Torch as well as the recent OS upgrade on my Playbook would have helped, but no dice... Any suggestions?
Thanks in advance!
Solved!
Go to Solution.

yes, I assume there is a small partition that has the OS from the factory, but as soon as you setup the WiFi, it automatically upgrades to the latest OS.
I was pleasantly surprised at how quickly it wiped the OS. The only knock is having to go through the initial "training" process but otherwise pretty painless.

PrintOpen crashing application when used after PrintSetPrinter for networked IPP print server

This is on Windows Server 2008 using PB 12.1 Build 7298.
I'm using PrintGetPrinters to get the printer name of the networked IPP print server that is setup on the machine and it comes back as:
\\http://aps-ps-1:631\cp
I then use PrintSetPrinter with that name to change the printer, which works fine.
After calling PrintSetPrinter I call PrintOpen to open a print job, which then crashes the application with a gdi32.dll fault.
If I call PrintOpen( "testing", true ) it works fine, but PrintOpen() or PrintOpen( "testing", false ) crash the app. This all works fine on a non networked printer on the server, which we've been using for years, but are now trying to switch to a print server.
Does anyone know why PrintOpen would be crashing when not showing the print dialog box? Any help would be appreciated.
Thanks,
Eric Cole

Hi Chris,
Thanks for the reply. It's not a catchable exception, already tried that. It's one of those faults where you get the microsoft windows yourapplication.exe has stopped working popup and it puts an error in the system application events that you can view in the event viewer. There isn't much info in the event to go off of either.
I did find another older forum post that seems to be the same issue but with PB 12.5.1 and where mine is crashing his just didn't print. The thread is here: http://nntp-archive.sybase.com/nntp-archive/action/article/%[email protected]%3E
Since it's only an issue with PrintOpen I'm changing it to datawindow.Print instead, but I have to combine 2 datawindows in the same print job without a print dialog so I'm forced to come up with a workaround in order to accomplish that. I'm going to hopefully create a composite datawindow with the 2 combined dws so I can get them in 1 print job. It's just going to take longer than I thought because my datawindows have nested reports so I can't use GetChild to get a reference to them and they are being modified with .Modify.
Eric

Playbook crashes network when using 80211N networks

Similar Messages

Maybe you are looking for