PlayBook: Dock with HDMI + Remote Control?

Has anyone a idea, where to buy a dock with hdmi? Always putting cables to the device is so 80s... i want to put it to the dock only.
Does anyone know, if its planet to sell some kind of a remote control for the PlayBook? I read, some guys are using 30 or 40 ft cables to watch videos across the living room... but thats a bad joke! As an alternative to a hardware remote, i would use vnc-server for PB, but thats not available today.
Any suggestions?

I know it was not your question but you can also use your PlayBook as an XBMC remote control:
http://www.google.com/search?hl=en&q=xbmc+%2Bsite%3Aappworld.blackberry.com+%2B%22supported+devices%...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

Can you manually advance a Captivate slide presentation with a remote control and a projector.

I have published a large volument of PowerPoint presentations with Captivate 5.0 and intend to distribute the presentations to live instructors as a means to control content delivered live by instructors to the students. The files are aggregrated into groups of lessons and published to PDF with a Table of Contents.
We need to avoid manually advancing the show from the laptop.
Having difficulty determining how to use remote control via laptop and projector to advance the next slide or presentation. Can't get it to work. Was able to do so previously with PowerPoint slides converted to PDF shows. Remotes/Laser pointers worked fine. But now that I have processed the shows through Captivate 5.0 can seem to find a remote that will work with the new PDF or SWF with our systems.
We use a laptop and projection system, so need to be able to advance the show to the next "slide" manually and are trying to figure out how to do it with a remote control.
Has anyone else experienced this challenge and did you find a solution?.

Hi Carey,
if you can apply the letter "A" for "next" to your remote control?
Then you could add a shortcut to your buttons in the captivate file.
In deapth:
Go to a PPT importet slide (using the "click mouse" option to continue".
Click somewhere in the screen (clickbox_xx will be selected).
Properties - Action - Shortcut. Click it and press "A".
Click somewhere on the stage.
Now when you press your next button on the remote, Captivate will receive an "A" and continue to the next slide.
Hope this helps
Best
TD

I have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

i have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

I have a Mac Book Pro 2008
I have my MBP paired with Apple TV and use it all the time
My only complaint is that when I use the Apple TV remote it sometimes turns things off and on in iTunes.
Besides all the options from Apple TV I can listen to anything on my mac over my TV surround system thru Apple TV

How do I match encore buttons with my remote control

So, I've made a menu in Encore and when I build the DVD and put it in my DVD player, the buttons don't work how I want them to with my remote control. For example, on the main menu (which I created in After Effects) I have two buttons (one above the other) - "Play" and "Chapters." To go from Play to Chapters on the main menu, I have to push the right arrow button on the remote instead of the down button.
Another example is my chapters menu (created with an Encore menu). I have 6 chapters buttons, plus a "next" and "main menu" button. The logical thing to do with the remote is press the down button when you want the one below, right when you want the button on the right etc. etc. but instead it's all mixed up.
Hopefully that makes sense . . . so how to I tell encore which button on the remote I want to be pressed to go to the desired button on the menu?

It is called "button routing." When the buttons are nicely lined up, "automatic" (the default) usually works well. But sometimes not. Also, if you move buttons around, you can change the numbering.
In the menu viewer, click on the icon for "routing." This will show you what "number" each button is, and what number button each remote arrow click will go to.
You can turn automatic routing off, and drag these numbers to set the remote as you wish.
http://help.adobe.com/en_US/encore/cs/using/WS74BC1059-66C3-46c5-9FA6-78DF10B38353.html

An issue with the remote control

The remote control works with other programs, however its doesn't when I use it with Front row. I have paired it with the Imac(10.6.4), it also works ok with the Macbook.
Any suggestions what may be the problem and how to fix it?
Thanks in adv

No not yet, I have two Apple TV's, one was connected directly to my time Capsule in the lounge, the other was connected in the bedroom via WiFi through an Airport express that is located a few metres away.
What happened was that when I got the new replacement Apple TV I fitted this to the main TV due to the new 1080p HD facility. I then took the Apple TV that was in the lounge and working perfectly well and resited it in the bedroom.
It was then that the fault appeared again, so it either means that the fault is on the WiFi side or the HDMI lead I suppose.
The confusion came when the genius said that it wouldnt matter about the WiFi connection.
I will check with a different HDMI Lead if you think it may be that.
thank you for your help
Paul

Does anyone know if the iHome stereo IDL100G stereo system comes with a remote control?

Hi all,
I am new to the site. I hope I am posting this in the correct forum section. I am looking to purchase an iOS 7 compatible stereo system that serves as both dock and charging station WITH a remote that I can use while the devices are charging/playing. I have looked high and low and cannot seem to locate much info at all. I see that Apple.com has the iHome IDL100G which can be used with lightning cable Apple devices but since the update of iOS7 I am unsure if the stereo system would be compatible. Is this stereo 1) MFI-compliant 2)iOS7 compatible 3) able to charge multiple iOS7 devices simultaneous 4) and has an independent remote of the actual iOS device that allows one to control music queues while the devices are charging?
Thank you in advance.

Watch the AirPlay guided tour.
http://www.apple.com/ipad/guided-tours/

New In-Ear with Radio Remote Controll compatible?

Hi.
Does some one knows if this works?
Ipod Video -> Radio Remote Controll -> New In-Ear Headphones.
Thanks!

They will give you audio. But the remote and mic will not work.
The new in - ear headphones only will give you remote and mic capabilities with a 4th gen nano (tall screen), ipod classic (120 gb) or 2nd gen ipod touch (volume rocker)

Apple or 3rd Party: PLEASE make a dock with the remote port!

Sure there was no room for the remote port on the bottom, but you could make a dock, just like the lanyard headphone dock, that includes the headphone miniplug and the remote plug, just like on all the docking iPods...
THEN, we could use our iTrip FM transmitters (or any one of them that use the iPod's power), that ever-so-cool Logitech Bluetooth headphone set, various wireless remote controls -- even Apple's own wired-remote control... the list goes on and on.... even that crazy iPod laser pointer...
Thanks in advance.

Good suggestion, your feedback should be provided at: http://www.apple.com/feedback/

N80IE Problem with Nokia Remote Control Headset AD...

Guys,do you have this AD-41 Remote Control Headphone,found in N73 Music Edition Phones,on your N80? My problem is that, I cant remotely play a song by simply pressing the PLAY Button on it... But before I bought this headset for my N80 I check first the Nokia web site, its says that it is COMPATIBLE... Is there something missing? Like, do I need to install a certain app so that it would work? Or, Its just like, I can't do it in N80?

Hi, Ryan. Look, I have now an N73; but before I had an N80 and guess what: I had the same problem as you. I sent an e-mail to Nokia, and what did they say in the e-mail they sent back? "The compatibility between your device and your hands-free is PARTIAL, sir.". What the **bleep**?!!... Yes, it's not fully compatible. You don't need any software or setup in the phone... You (and I) need light the Nokia's offices on fire...

Ipod nano 7th gen with remote control and with or witthout dock

Hello there!
First of all thank you for reading me
I need to use my ipod nano 7th generation with the remote control because I'm installing it in my new ballet school and it's very uncomfortable going every time near the stereo to control it. I've always connected the ipod with the cable, not with the dock and I was wondering: can I use the apple remote controller without the dock? if no, has the dock to be apple or is it the same? I've seen that the apple universal dock has the old connection (like iphone 4, just to understand) .. How can I connect my ipod 7th gen? is there any adapter or something coming with the dock?
Thank you very much,
Anna

Ok I've found out that the universal dock is no longer available and that, btw, is not working with ipod nano 7th.... how should I do then?

After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work

After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
Thanks!

Look at the previous posts on the right under the heading: "More Like This". I appears that others are having the same problem.

Remote control Sony video camera with Mac Mini?

Is it possible to connect an IR transmitter to a mac mini to be able to control a Sony camera from a remote location miles away? Specificaly, I want to be able to point my Sony IR remote control at my Mac Book Pro at home to control a video camera at work via the internet. Control features include focus, zoom, iris, White balance, etc. Is this possible? (The Sony camera comes with a remote control)

I never heard of such a device but there's a bunch of stuff in Google:
"Results 1 - 10 of about 611,000 for "long distance remote control."
Your best bet would probably be a telephone, with the person at the other end in the same room as the camera.

My remote control is NOT working with my ibook

my front row won't launch! not even with apple button+esc (escape) button.
or with the remote control.
What do i do?

I think you've posted in the wrong forum. As S.U. mentioned, neither Front Row nor an Apple remote come with an iBook computer. Do you have a "MacBook" instead? There is also a whole forum for Front Row here:
http://discussions.apple.com/forum.jspa?forumID=1164&start=0
You might post in there if you can't open Front Row with the Apple-esc key combination and you've changed the battery in the remote.
-Doug

Remote control not starting with window

Hi there
I have a X-Fi? sound card, with a remote control... I just want it to start with windows, but if I check " Acti'vete the RC when Windows Starts" , I still have to do it manually...
I've already tried to reinstall entertainment center, but it has no longer effects on it.
Do you know what I have to do ?
What kind of registry key should I add to get it automatically ?
Or, at least, what kind of shortcut do i have to put in "start" directory ?
Lots of questions, just problem
P.s. : sorry for my english speaking

I had to go through this process when an iCloud shared photostream would not display on the Apple TV screensaver.
Two easy solutions.
When you press the Menu button, does the Apple TV light blink? If not, go to the Second option below.
If yes, begin with the First option below.
First option:
Reboot Apple TV. Hold down the Menu button and the Down button at the same time until the light blinks, then unplug the device for six seconds, and plug it back in.
After the Apple TV reboots, see if your remote is working. If not, continue to the second option.
Second option:
Un-pair the remote, then re-pair the remote.
To un-pair it, hold down the Menu button and the Left button at the same time until an icon appears on the screen showing a remote with two cloud-like icons. That means the remote is un-paired.
To re-pair the remote - or to pair it with the Apple TV for the first time - hold down the Menu button and the Right button at the same time. It should pair with the Apple TV almost immediately.
Both options have worked for me, when occasional Apple TV issues happen.

PlayBook: Dock with HDMI + Remote Control?

Similar Messages

Maybe you are looking for