Playbook locks up when using Blackberry Bridge

Playbook OS:
1.0.7.2670 Build 52084
Blackberry Torch 9800:
6.0 Bundle 2647
Blackberry Bridge 1.0.4.9
I have an issue where my Playbook will freeze when I enable (connect) via Blackberry Bridge. It will initially connect with no problems, but the moment I try to respond to an email from my Playbook, the Messages application will stop responding then all the applictions in the Blackberry Bridge section will not respond, then the Playbook will stop responding alltogether. I figured upgrading to the new build of Blackberry Bridge on my Torch as well as the recent OS upgrade on my Playbook would have helped, but no dice... Any suggestions?
Thanks in advance!
Solved!
Go to Solution.

yes, I assume there is a small partition that has the OS from the factory, but as soon as you setup the WiFi, it automatically upgrades to the latest OS.
I was pleasantly surprised at how quickly it wiped the OS. The only knock is having to go through the initial "training" process but otherwise pretty painless.

Similar Messages

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

How do I lock safesearch when using BING

how do I lock safesearch when using BING search engine

I assume you're using the "Content Aware" option for the Spot Healing brush. It can be a maddeningly stupid option -- there's no telling from how far away it will pull the replacement pixels and will leave streaks that can be very difficult to remove.
It would be best for you to include a sample image that's giving you the problem so we can suggest the best way to attack it.
In general, the "Content Aware" option works best when you use a very small brush size. That pulls in pixels closer to the area you want to heal. If you get streaks, sometimes you can use the Spot Healing brush to get rid of them by going over the area in a perpendicular direction to the streaks.
Ken

Machine freezez/lock ups when using password protected certificates in IE 11 Windows 8.1 Pro

When using certificates that have a password enabled and private keys we find the machine hangs up competly with the memory usage jumping to 99%. The main process being the Local Secuirty Authority Process that causes the machine to lock up. The work
around we have is to remove this certificate and import a new certificate making sure we un-tick the check box for private key password.
Not sure if this
KB2813237 is linked, but this hotfix is available for Windows 8.1 Pro OS.

Hi Simon,
You can try that suggestion and check whether it is solved and give your result, if there is any other issue, you can post it back.
Regards
Wade Liu
TechNet Community Support

Processor locks up when using Firefox, help!

I am still new to the Mac world and need some help.
I have a 2009 Macbook, with Mac OS X, 10.6.8, Processor is 2.26 and memory is 4gb.
I've noticed lately that when using Firefox I seem to have lock up issues and I can't click anything. The rainbow processor thing just keeps running and running. Often times I cannot even click the Apple icon in the tool bar in order to get to force quit. (I don't know what buttons to push for force quit)
The only way to solve the problem is to hard boot the computer and I know that is not a good thing to do. What is going on with the processor as to why it gives me hang ups when using Firefox? I have about 5-6 windows open and each has about 7-8 tabs open.
Should I upgrade to Mountain Lion? Will that help? Again, any advice or assistance you can provide will be greatly appreciated, keep in mind I am not a techie kind of person, so simple terms will be best.
Thanks Apple community.

Ever since I downloaded v12, my computer has been locking up at least twice a DAY. I have uninstalled and reinstalled everything, including Firefox itself, as well as Adobe, and all the plug-ins associated with the application. I've run Spybot, C-Cleaner, and my anti-virus to confirm that there's nothing else wrong with the computer outside Firefox. If the computer is rebooted and Firefox is not opened, the system is fine. But once Firefox has been opened - even if it survives the session and I close Firefox - the computer is about 75% likely to lock up, requiring a hard reboot. I'm running Vista Home edition (32 bit). If anyone has a clue what might help stop this - because I'm quite sure that it's not healthy for my computer to be hard rebooted twice (or more) a day - I'd love to hear it! It's getting waaaay more than annoying, enough so that I'm ready to move to another browser to stop the problem.

My computer locks up when using Firefox

When using Firefox my computer periodically locks up. My screen goes blank and everything is unresponsive. I have to to a hard reboot to get my computer back up. I'm using a 64 bit version of Windows 7 and I have the latest version of Firefox installed. I typically don't use any of the plug-ins.

Ever since I downloaded v12, my computer has been locking up at least twice a DAY. I have uninstalled and reinstalled everything, including Firefox itself, as well as Adobe, and all the plug-ins associated with the application. I've run Spybot, C-Cleaner, and my anti-virus to confirm that there's nothing else wrong with the computer outside Firefox. If the computer is rebooted and Firefox is not opened, the system is fine. But once Firefox has been opened - even if it survives the session and I close Firefox - the computer is about 75% likely to lock up, requiring a hard reboot. I'm running Vista Home edition (32 bit). If anyone has a clue what might help stop this - because I'm quite sure that it's not healthy for my computer to be hard rebooted twice (or more) a day - I'd love to hear it! It's getting waaaay more than annoying, enough so that I'm ready to move to another browser to stop the problem.

Ipod Mini Locks Up When Using It With A JVC KS-PD100

Since I've updated my iPod mini to the latest version of the firmware it locks up when I use it with my "Made For iPod" JVC KS-PD100 adaptor.
This allows me to connect my ipod to my JVC car head unit and control it via the head unit.
It worked perfectly when I had the old firmware on the iPod, but now I have updated it to the latest version (after a warranty repair) I get the JVC logo appear on the screen and it all works fine with the head unit, but when I disconnect the iPod, the controls are still locked up. I then have to force a re-boot of the ipod to be able to use it again.
I've tried to download an older version of the ipod updater, but all the links I try give me the latest version of the updater when I come to install it.
My questions are
1. Has anybody else had this problem?
2. Are apple aware of it?
3. I'm guessing it's a software problem, or have I geen given a duff rarranty replacement?
4. Where can I get a copy of the older ipod updater - preferrably the october version?
Any help would be most appreciated as I've e-mailed apple and had no reply at all!
Thanks
Ross

I've tried that already - but then the iPod is connected to the sterio, the iPod controls are disabled so I can't switch it off at all.
If I disconnect the iPod before turning the sterio off, the ipod stays playing until I reboot it
It worked perfectly on my old ipod with the old firmware, if I turned off the sterio, the JVC logo woulds disappear, the ipod would be paused and use of the clickwheel controls would be returned automatically.
I'm guessing it's a bug in the latest iPod firmware

E71 locks up when using maps

My E71 will lock up when I try t use the maps options. I just bought it and am in Panama City Panama. What can I do? Also if any body has any pointer on using this thing I could use them. I am new to this type of phone.

Hi dbg20
If you have not defined a valid WEB connection for the "Positioning Server" then the Assisted GPS feature may not be able to establish a connection, which is enough to lock-up application; if you don't have a GPRS data connection you may have to disable the "Assisted GPS" feature unfortunately.
Tools > Settings > General > Positioning > Positioning Server > Access point
Also make sure Assisted GPS is checked under "Positioning Methods".
Happy to have helped forum in a small way with a Support Ratio = 37.0

Lightroom locks up when using auto import / watch folder

Hello All
Has anyone ran into a problem with Lightroom locking up when you are using the auto import / watch folder feature. Everytime i try to even drop one file in the watched folder, I get a lightroom is not responding message. This really suck...........Everything else seems to be working so far.
Thanks
Bill

I had the same problem. When i would auto import, it would stuck after one photo was imported. I have a separate partition on my harddisk for photo's (F:\) when i made an extra subdirectory (F:\Photo) and auto imported the photo's to that place the problem was solved. Why ? I don't know
greetz J.

Playbook crashes network when using 80211N networks

Hi. I am having issue getting my PB to work correctly on 80211N networks. I have tried with both a generic DLink router and a brand new LinksysWRT310 router. My configuration is Siemens SE567 Modem/Router with an uplink to my Wifi/Lan network. When I am running Mixed mode (B/G/N) all my other devices have been working flawlessly. As soon as I put the PB into the mix, it causes outages across the network and begins dropping constantly. Impossible to use. If I throttle it back to mixed (B/G) there are no more issues.
Things I have tried:
Delete connection competely and reset manually (i.e. setup fixed IP and gateway)
Tried WPS on Router and PB.
Tried downshifting from WPA2/Personal to WPA/Personal
Throttling MTU down to 1356 from 1500, and Changed the beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306
Turned off Wifi firewall
None of these has resulted in any greater stability.
Here is a copy of my logs trying to use the N connection. Any assistance is appreciated.
Wi-Fi Diagnostics Logs
INTERNET CONNECTION
> IP Address: (personal info removed)
> Subnet Mask: (personal info removed)
> Default Gateway:(personal info removed)
> Primary DNS:(personal info removed)
> Secondary DNS: (personal info removed)
> Domain Suffix: XXXY
> MTU: 1500
> Proxy Server:
> Proxy Port:
WI-FI INFORMATION
> Status: Connected
> Failure Reason:
> Profile Name: XXX
> SSID: mcduncan
> Channel: 11
> AP MAC Address: c0:c1:c0:0f:d9:76
> Security Type: WPA2 Personal
> EAP Method:
> Signal Level: -69 dBm
> Connection Data Rate: 65 Mbps
> Network Type: 802.11g/n
DEVICE INFORMATION
> Physical Address: 14:74:11:33:1b:72
> Device OS: BlackBerry PlayBook OS
> Device Pin: 5011BFA6
> OS Version: 2.0.0.7971
Supplicant Logs
> 20:48:30: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:48:30: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:48:30: <2>Associated with c0:c1:c0:0f:d9:76
> 20:48:30: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:48:23: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 20:48:13: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:48:10: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:48:06: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:48:06: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:48:06: <2>Associated with c0:c1:c0:0f:d9:76
> 20:48:06: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:47:54: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:41:58: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:41:58: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:41:58: <2>Associated with c0:c1:c0:0f:d9:76
> 20:41:58: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:41:42: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:38:02: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:38:02: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:38:01: <2>Associated with c0:c1:c0:0f:d9:76
> 20:38:01: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:37:51: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 20:37:41: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2412 MHz)
> 20:37:41: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:35:08: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:35:08: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:35:08: <2>Associated with c0:c1:c0:0f:d9:76
> 20:35:08: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2412 MHz)
> 20:26:12: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:25:52: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:25:52: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:25:52: <2>Associated with c0:c1:c0:0f:d9:76
> 20:25:51: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:25:13: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:24:29: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:24:29: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:24:28: <2>Associated with c0:c1:c0:0f:d9:76
> 20:24:28: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:24:18: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:23:44: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:23:44: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:23:44: <2>Associated with c0:c1:c0:0f:d9:76
> 20:23:42: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:23:31: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:18:49: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:18:49: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:18:49: <2>Associated with c0:c1:c0:0f:d9:76
> 20:18:49: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:18:14: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 20:17:14: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 20:17:14: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 20:17:14: <2>Associated with c0:c1:c0:0f:d9:76
> 20:17:14: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 20:17:03: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 19:59:14: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 19:35:16: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 19:35:16: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 19:35:15: <2>Associated with c0:c1:c0:0f:d9:76
> 19:35:15: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 19:35:04: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 18:59:18: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 17:59:18: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 16:59:21: <2>WPA: Group rekeying completed with c0:c1:c0:0f:d9:76 [GTK=TKIP]
> 16:53:49: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:53:49: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:53:48: <2>Associated with c0:c1:c0:0f:d9:76
> 16:53:48: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:53:37: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:53:16: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:53:16: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:53:16: <2>Associated with c0:c1:c0:0f:d9:76
> 16:53:16: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:53:12: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:52:47: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:52:47: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:52:47: <2>Associated with c0:c1:c0:0f:d9:76
> 16:52:47: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:52:40: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 16:52:30: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:52:27: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:52:20: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:52:20: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:52:20: <2>Associated with c0:c1:c0:0f:d9:76
> 16:52:20: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:52:08: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:51:44: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:51:44: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:51:44: <2>Associated with c0:c1:c0:0f:d9:76
> 16:51:43: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:51:17: <2>Authentication with c0:c1:c0:0f:d9:76 timed out.
> 16:51:07: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:51:04: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:51:03: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:51:03: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:51:03: <2>Associated with c0:c1:c0:0f:d9:76
> 16:51:03: <2>Trying to associate with c0:c1:c0:0f:d9:76 (SSID='mcduncan' freq=2462 MHz)
> 16:49:23: <2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 16:07:40: <2>CTRL-EVENT-CONNECTED - Connection to c0:c1:c0:0f:d9:76 completed (reauth) [id=0 id_str=]
> 16:07:40: <2>WPA: Key negotiation completed with c0:c1:c0:0f:d9:76 [PTK=CCMP GTK=TKIP]
> 16:07:40: <2>Associated with c0:c1:c0:0f:d9:76
PING
****** 20:36:15 (ping -c4 -n 192.168.1.254)
> round-trip min/avg/max = 11/54/138 ms variance = 3487 ms^2
> 4 packets transmitted, 4 packets received, 0% packet loss
> ----192.168.1.254 PING Statistics----
> 64 bytes from 192.168.1.254: icmp_seq=3 ttl=64 time=19 ms
> 64 bytes from 192.168.1.254: icmp_seq=2 ttl=64 time=138 ms
> 64 bytes from 192.168.1.254: icmp_seq=1 ttl=64 time=51 ms
> 64 bytes from 192.168.1.254: icmp_seq=0 ttl=64 time=11 ms
> PING 192.168.1.254 (192.168.1.254): 56 data bytes

Sorry, I can't tell help you. You seemed to have done all the correct steps. There have been other posters having the same problem as you with 802n. You can do a search to see if you can find the post. You might also check out crackberry.com. In looking over your log, it looks like authentication failure. I have found that to usually mean there is a miss match of settings when setting the security protocols. In other words there may be a protocol you are using with 802n that will not work with your system. If you change that protocol setting if you have a choice, it may work. If you do have success, report back as to what you found.

System lock ups when using hard disks

At first I thought I had the same issue as in this thread however after reading his logs I decided that it is unlikely since the topic opener seems to be getting a bunch of
Apr 4 17:00:15 daxteriv slim[708]: (Do:882): GLib-CRITICAL **: Source ID 46 was not found when attempting to remove it
, so I decided to start a new thread.
I am not getting anything in my logs when I look at them after the crashes. It seems as if whatever is causing the issue makes it impossible to write to the drives so nothing seems out of place until after it's too late, and quite obvious that something is wrong. The sole exception to this was some complaint about ata9.00, however this seems to have been a red haring since the complete removal of this drive solved nothing, though it did make the error go away.
I have run memtest, and prime95 (in windows since at the time I didn't want to boot my system) both coming back negative. I also checked for SMART errors, particularly UDMA errors. Again, negative.
Here are some previous threads of mine that I believe to be all related to the same issue:
https://bbs.archlinux.org/viewtopic.php?id=195449
https://bbs.archlinux.org/viewtopic.php?id=193937
https://bbs.archlinux.org/viewtopic.php?id=192704
[edit3] My previous thought was that this was a btrfs issue, however now I think it may be more hardware related.[/edit3]
Last night I was writing urandom to a new drive and I woke up in the morning to see that it had stopped prematurely, but not due to lack of space. The system had not locked up completely, which was new, however, as soon as I did something that accessed the disks (tried using the Gnome Dash), all hell broke loose. I immediately hit the power button, which would start a shutdown. I didn't know about REISUB, or I would have tried that. In anycase the shutdown failed and I had to hard reboot.
The evening before I was playing games just fine and doing normal activities.
Also, the other day, while booted into the live cd I think it started to crash since it was acting extremely bizarre, but I shutdown, successfully, before it could do more than complain a lot. At the time I was in the middle of scrubbing a btrfs volume after a system lock up. I think, but am not certain, that I saw on my motherboard "A5" which, according to the manual indicates "SCSI reset", but I had an extremely bad viewing angle. I know neither if what I think I saw was correct, nor do I know if the system was again in the process of a meltdown.
In general there is no activity that seems to be able to instantly trigger this, though in each case, if my memory serves me well, there was a constant stream of data either to or from a HDD.
My set up is that I have 5 HDDs, and an SSD. One HDD has Windows, my fallback installation of Arch, and daily backups. Another drive, which I just installed a few days ago currently only has single 50GB btrfs partition that is not part of any sort of larger volume. I also have three other drives each with four parttitions each involved in a btrfs volume. At the top is a 175 GB volume in a RAID0 configuration, after that is a 25GB partiton in RAID1, then a 650GB partion (RAID1), and the remainder of the disk (about 80GB) is in single. The RAID0 is has games on it and sometimes for short term storage (a few hours), the 25GBx3 RAID1 is used for Arch as well my ~/.local, ~/.cache, ~/.thunderbird, ~/.mozilla, and ~/.config. The 50GB partition I mentioned is currently doing the job of this volume, and was not mounted last night, but has been before. The 650GBx3 is used for long term storage of just about everything, in particular ~ is mounted here. The single configured volume is used for downloads, storing ISOs and installers. The SSD is used for caching those partitions used in the RAID0 volume with bcache. I DO NOT think this is a bcache issue since the RAID0 volume has never had any errors.
My motherboard is a ASUS X79-DELUXE which has the SATA controllers: Intel X79 Express Chipset, Marvell 9230, ASMedia 1061.
[edit] Oh, I'm on kernel 3.19.2 and btrfs is 3.19.
[edit2] Also, I converted the RAID0 to a single in case that matters.
[edit4] I finished scrubbing and copied my "journalctl -b" output to pastebin. I can't see any thing that might raise any flags. http://pastebin.com/WXpbpTuc
Last edited by nstgc (2015-04-05 16:46:00)

nstgc : it's hard to tell if your problems are memory related, but memtst often needs multiple passes to detect errors.
How many passes did you let it make ?
Is it possible for you to take out say half of the memory chips and see if that changes anything ?
Last edited by Lone_Wolf (2015-05-22 18:27:04)

Reader 9.3 locks up when using icons to move within doc & print

I've run into an issue with Adobe Reader 9.3.2 under XP SP3 all updated...
When I try and read a PDF and move through the documents using the various icons at the top menu - such as the arrows or printing icon - it hangs up. If I use the slider bar on the right to move through the document I don't have an issue. But consistently clicking on any of the icons seems to hang/lock up any PDF.
I've uninstalled all of the adobe products and reinstalled everything from adobe site and still have this issue with the icons.
This is on an HP Probook with a touchpad and a ms wireless mouse. Stumped. So is IT.
Thanks,
-cjd

Wrong forum...
http://forums.adobe.com/community/adobe_reader_forums

ITunes Locking Up When Using External Hard Drive

Has anybody else had any trouble with ITunes locking up for about 30 seconds at a time. The music keeps playing but the cursor locks up and you can't click, use hot keys, etc. I'm using a 150GB external hard drive to store my music and while it's locked up the hard drive is crunching something, almost like ITunes is looking for something. All of my files are organized, no viruses or spy-ware that I can find. Doesn't happen with any other audio program, just ITunes. I've watched the CPU usage on Task Manager when it happens and the only thing that is running is ITunes. Please help!

I came across your post because, I have been having issues for a while with the same description, except that I am using separate partitions on my main drive.
What I noticed is that if I set my podcast downloads to go to my NTFS main partition, there is no lag... but the moment I set it to my FAT32 partition, the lag starts back up.
I believe that the issue is with the slooow write time to FAT32 in large drives. (And in my instance, the move command apple does to put the podcast, which writes to the FAT32 partition and removes the NTFS temp download) Do you see the same lag or alot shorter if the drive is formatted to NTFS?
I don't really have any space currently to format my partition to test the issue, but I the fact of the downloads speeding up when set to my NTFS main disk makes me think that this issue could be lessened by using FAT32.
a side note for me, I'm considering reformatting my drive to NTFS, after backing up due to the advancement of ntfs3g in linux, so this could solve my problem at least.

Encore locks up when using the Adobe Dynamic Link to import Bluray video.

When I try to import video into Encore by using either the Adobe Dynamic Link or by opening Encore and importing as a timeline, Encore locks up during the "Prepare Transcode Settings" . I have Adobe Master Suite CS5 which was a download version. I've had this software since May 2011. I have been able to use import video in the past, but there seems to be an issue with Encore now. Has the program been corrupted? If I need to download Encore to repair it, how do I do this?
Thanks
Joe Miller

Some other things to read...
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641

MAX 3 locks up when using test panels

I am using MXI-3 fiber link to connect to PXI-1000B chassis from my win XP PC. I have a PXI-6115 and PXI-6533 in slot 3 and 5 respectively.
Both devices shows up in max and window device manager.
But when I try to check the properties test resources on PXI-6115 then nothing happens.If I run test panel on max or in virtual channel, its locks up the MAX.
Runing the test resouces in MAX on PXI-6533, I get the message that "This device is not responding to selected base address.
I have also tried this setup with windows 2000. When I runs MAX the TEst Panels and Test Resources buttons are grayed out.
I have changing diffrent setting for IRQ's and DMA without ant results.

When you install a MXI-3 card in the PC and the PXI chassis, there is a MXI Initialization disk that you get which installs the MXI-3 Optimization program on your PC, which must run on bootup of the PC.
Also, your PXI chassis must be powered on FIRST before your PC is powered up.
Have you done both of these tasks first?
Mark

Playbook locks up when using Blackberry Bridge

Similar Messages

Maybe you are looking for