Playbook not accepting FILES from my nokia c7 via bluetooth
I got the playbook recently.
I have nokia C7 phone having JPG files and mp3 files. I wanted to transfer files from nokia phone to playbook.
I have done the following -
1. Bluetooth of the both the devices are ON and they are paired successfully.
2. FILE sharing option on playbook is also ON
3. however, when i send any file via bluetooth to playbook, my C7 says unable to connect.
I dont understand this. All the pairing and file sharing options are set correctly.
Please provide a solution ASAP.
I can also do the internet teethering from my c7 successfully, then why it doesnt transfer files via simple bluetooth. What am i missing?
At the present time there is no bluetooth file sharing on the playbook. Use a pc or Mac to put the files on an then transfer them to the playbook. At least you will have a backup of the files.
Be a Shepard and not an iSheep.
Similar Messages
-
Can not transfer files from mac to iphone5 via bluetooth
getting message" service is not available for this device" . appreciate any feedback
You sync via itunes.
Click Support at the top of this page, then click Manuals. You will find the manual there. -
Hi there,
New to the iphone, and love it, but I would like to send a couple of files and photos to it from my previous phone via bluetooth... My previous phone was an LG KM900 and im having difficulty pairing with it... saying its not supported.,
Can someone give me a list of compatible bluetooth(able) phones, and i will do it through a third party...
Many thanks and I do hope there is a way to do this
regards
DebzThis is not a feature of the iphone or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the app
store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)
You could try emailing the files/photos from the LG and then open the emails
on the iPhone. Depending on the type of file, the iPhone should be able to at
least view the contents - editing will require an app capable of dealing with that
particular type of file. Photos should be viewable unless in proprietary format. -
Help Please: External Hard Drive not accepting files from Macbook
My Desktop is a PC.
My laptop is a Macbook.
My External Hard drive is a Belkin High Speed USB 2.0 External Drive Enclosure Kit.
I am new to the Mac.
The Macbook recognises the External Hard Drive when plugged into a USB port. No problem.
I can drag any file from the external hard drive into the mac. No problem.
But I cannot drag any file from the Mac back into the External Hard Drive. (Jpegs, PSD, Doc etc-no file is accepted)
When I drag the file from the Mac to the External Hard Drive I get this message:
"The item “filename“ cannot be moved because “folder(external drive)” cannot be modified.
I did a get-info on the external drive and got this information-
'Format: Windows NT Filesystem
Ownership and Permissions: you can only read'
It defeats the purpose of my working on my laptop if i cannot bring the files back 'home' to the Hard Drive-What can I do to be able to bring files back into the external hard drive? Can someone please advise me?
I look forward to hear from you.
(My email address is [email protected])
Macbook Mac OS X (10.0.x) 13.3" Intel Core Duo 2.0GHz Laptop
Macbook Mac OS X (10.0.x) 13.3" Intel Core Duo 2.0GHz Laptopif these macbooks are dual core(?) supporting mac and
windows is there not a way for me to work on a
file,save the file in windows and then drag it into
the external hard drive?
i guess not?
Not really.
On a related note and as an alternative, someone posted a way that I didn't think about which may get around having to do all that:
http://discussions.apple.com/thread.jspa?threadID=630540&tstart=45
i guess i'll have to go the partition route. all my
important files are on the external hard drive-who
can i trust to do this and how much can i expect to
pay for it?
I think I would try the above networking route first before playing around with the partition on the external.
I think it should work so long as the external drive on the PC is shared. -
How can I send a zip file from ipad to laptop via bluetooth
My laptop wont connect to the internet so, i want to send it files via bluetooth from my ipad. The files are zip files
This is not possible with the bluetooth that iPad has.
-
i have an I pod 4th generation and an I phone 5s, now i want to transfer my music files from I pod to I phone via Bluetooth, can you tell me how to do this??
Withour know what the error message said try:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues -
Alert: Trojan via iChat Do not accept file from Unknown Sources
See this page
http://www.ambrosiasw.com/forums/index.php?showtopic=102379&st=0
3:05 PM Friday; February 17, 2006See other threads starting up.
http://discussions.apple.com/thread.jspa?messageID=1756003#1756003
8:15 PM Friday; February 17, 2006 -
Good time.
I do not accept messages from 17 hours to 23 11/09/12 12/09/12 hours of the year.
Go through the iCloud in the mail, I also could not in the period.
I sent a few reports of problems to iCloud.
Now everything is restored. Thank you.
I use several devices: PC Win 7 and iPad OS 5.1.
The problem stalknulsya on both devices.
However, during the above period I have no messages.
Please let that happen. Is it possible to recover lost messages?
Thank youHi finecut,
I believe this Mac Mail Help info may help:
Backing up your mail
You can back up your mailboxes to a CD or another disk. To do this, you can either copy the Mail folder in your Library folder or create an mbox file, a common format for storing mail messages.
▪ To save the contents of all your mailboxes, hold down the Option key and drag the Mail folder to your desktop or to another disk. The Mail folder is in the Library folder in your home folder (~/Library/Mail).
Copying the Mail folder only backs up mail from POP accounts, or mail from an IMAP account that you've copied to On My Mac. When you are ready to restore the Mail folder, choose File > Import Mailboxes, select Mail for Mac OS X, and locate the Mail folder.
▪ To create an mbox copy of a mailbox, drag the mailbox from the mailbox list to your desktop.
▪ To create an mbox file with just some of your messages, select the messages, then choose File > Save As. In the Format pop-up menu, choose Raw Message Source, then enter a name and save the file.
You can copy mbox files to CDs or to other disks. When you want to restore your mail, choose File > Import Mailboxes, select "Standard mbox files," and locate the files.
hope that helps,
littleshoulders -
How to open .db files from a Nokia on PC (Windows ...
Hello,
Could you help me with opening/converting .db files from a Nokia. The files look like this: data0.db. I tried Access, Paradox, SQLite Manager, but nothing works.
Here is one of the files:
http://rapidshare.com/files/447616162/Data2.db
Thank you.I'm trying to open .db files as well. They were created by different versions of Nokia PC Suite, and I want to import the information in the Ovi software that Nokia is pushing now.
I lost my phone, and I am trying to recover some of the information that should still be contained in the Nokia PC Suite files located in C:\Documents and Settings\Admin\Local Settings\Application Data\PC Suite (on a Windows XP system).
There are different subfolders with different .db files, I'm not sure what they are all for.
I opened one of them using Notepad, and I was able to see contact information like this in between a lot of codes (phone number replaced with * for privacy reasons):
|��7��OAndrew BEGIN:VCARD
VERSION:3.0
N;ENCODING=QUOTED-PRINTABLE;CHARSET=UTF-8:Andrew;;;;
TEL;VOICE:+***********
END:VCARD
x
When I open Nokia PC Suite, I can't tell it to open a specific .db file. Previously, it was also the case that I couldn't get access to any of my synced contacts or messages from within PC Suite when my phone wasn't connected. Anyhow, I was hoping to be able to perform an export to CSV from that application but it seems that I can forget about that.
Apparently, I can't import these files with Ovi either.
Any advice someone? -
Xerox Phaser 4500 : "remote host did not accept file (32)"
Am trying to print to our networked Xerox Phaser 4500DT at work. Set it up as an LPR printer as I did with Tiger (setting it up as IPP gives a permission denied error when you try to print), and printed a test page. Worked fine.
Try to print any sort of useful document, however, and I get a "remote host did not accept file (32)" error, when it's spooled about 20% of the document. Anybody run into this, or have any ideas?
I've tried Leopard's built-in 4500 driver, and the Leopard driver from the Xerox website (which seems to be the same version anyway). I've also tried the trick of putting "lp" in the queue name field, which seems to have been the cause of this error for some people. No joy for me, though.That seems to be an LPD error message, so you could try setting the printer up as either IPP or JetDirect, if the interface supports either one.
-
Can not delete files from Adobe reader
can not delete files from adobe reader.
Can you let us know a little more about what you are trying to do? Adobe Reader opens pdf files but does not store them so, there's nothing to delete.
-
hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossaryWow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
LSMW accept file from logical path?
Dear All,
Can LSMW designs for conversions accept file from logical path?
The requirement is during actual conversion execution -the conversion team can store files anywhere they want, configure logical file names/paths and use our LSMWs without needing program modifications.
Kindly let me know.
Thanks in Advance
RanjanHai KCR
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
Subproject Name
object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
Maintain Object Attributes
select Standard Batch/Direct Input
give Object -- 0020
Method -- 0000
save & Come Back
2) select radio-Button 2 and execute
Maintain Source Structures
select the source structure and got to click on create button
give source structure name & Description
save & Come Back
3) select radio-Button 3 and execute
Maintain Source Fields
select the source structure and click on create button
give
first field
field name matnr
Field Label material Number
Field Length 18
Field Type C
Second field
field name mbrsh
Field Label Industrial Sector
Field Length 1
Field Type C
Third field
field name mtart
Field Label material type
Field Length 4
Field Type C
fourth field
field name maktx
Field Label material description
Field Length 40
Field Type C
fifth field
field name meins
Field Label base unit of measurement
Field Length 3
Field Type C
save & come back
4) select radio-Button 4 and execute
Maintain Structure Relations
go to blue lines
select first blue line and click on create relationship button
select Second blue line and click on create relationship button
select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : MM01 and press Enter
after that
1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
Maintain Fixed Values, Translations, User-Defined Routines
Create FIXED VALUE Name & Description as MM01
Create Translations Name & Description as MM01
Create User-Defined Routines Name & Description as MM01
after that delete all the above three just created in the 6th step
FIXED VALUE --MM01
Translations --MM01
User-Defined Routines --MM01
come back
7) select radio-Button 7 and execute
Specify Files
select On the PC (Frontend) -- and click on Create button(f5)
give the path of the file like "c:\material_data.txt"
description : -
separators as select comma radiao- button
and press enter save & come back
8) select radio-Button 8 and execute
Assign Files
Save & come back
9) select radio-Button 9 and execute
Read Files
Execute
come back
come back
10) select radio-Button 10 and execute
Display Imported Data
Execute and press enter
come back
Come back
11) select radio-Button 11 and execute
Convert Data
Execute
come back
Come back
12) select radio-Button 12 and execute
Display Converted Data
Execute & come back
13) select radio-Button 13 and execute
Start Direct Input Program
select the Program
select continue button
go with via physical file
give the lock mode as 'E'
and execute
Thanks & regards
Sreenivasulu P -
My HP photosmart premium with wireless ePrint, will not print files from mobile phone says it **may have** a virus- and deletes the file?!? My Fiance has the same phone, and I used it. It completed the file??? If I text message and E-mail address, my cell phone will come up as and E-mail address... has anyone else had this issue? Is it because I texted the the file? It didn't seem to be and issue on any of the other mobile phones used.... I am out of answers.... I tried to E-mail as well...
Thanks in advanceI have nearly the same problem, the printer discards my print job even when i have entered my email address as authorised senders.
Details from my other post:
I sent 2 emails to the printer:
- one is a 3 lines of text and numbers in a GIF file sent as an attachment
- another is a jpg circuit diagram paste in a word doc sent as an attachment
both are classified as spam and refused to print. i have no email coming back saying it failed (even i have checked "Email Job Status" in ePrint Settings.
So what will this HP printer print?
How can I switch this useless spam filter off?
I have get this filter off! I need this email printing to work reliably, that is a major reason I bought this printer
Any suggestions are welcomed...
HP's slogan on the box:
"Now you can print from virtually anywhere" (but get discarded every single time!) -
I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.
Maybe you are looking for
-
Maximum number of accounts allowed in Mail?
Here's a unique one for you: Is there a maximum number of email accounts you can set Mail up to receive? I'm involved in three businesses, which means that between my personal accounts and professional ones, there are 25-30 different email accounts t
-
Hi, How would you go about when you have this problem? the getVal being in a static method can not access other non static method. Whats the best way to go about? thanks * To change this template, choose Tools | Templates * and open the template in t
-
Missing sdk download for instant client for Linux
Hi, I'm following Ubuntu community documentation here https://help.ubuntu.com/community/PHPOracle to get started developing php/oracle applications. My problem is that the sdk download is missing. It is in the list here http://www.oracle.com/technetw
-
People cant leave comments on my blog!! Help!!!
Ho there guys & girls, I need a little bit of help please. I have had a blog now for about three weeks and I am getting numerous people emailing me through my web site sying that they want to leave a comment but cant, any ideas. I dont want to have t
-
Search help with multiple key fields
Hi, I want to dispaly search help on a field from a internal table have multiple key fields i.e combination of fld1 + fld2 +fld3 makes one single row. Therfore can any one tell me how to return that single row , because if I am using function F4IF_IN