Playbook not charging although led show charging
The green LED began to flash and now it appears to be normal charging But battery is not charging and PB is off. Any one help
What was the lead up to this? Have you been using the device and charging it regularly and then this? Did you let the battery run flat?
It is possible for the battery charge to be so low the device can't charge the battery, That could happen if you left the device and let the battery discharge too much over a period of time. If you think that is the case, look up stack charging, or stacked charging.
It is also possible the device is broken or worn out in some other way.
Good luck.
- Ira
Similar Messages
-
I carried out a recent software update and there after that my itunes music would not sync in the normal way. My music only shows on my ipad when connected and in music summary and this is shown as grayed out with a broken circle icon beside any new music which has been inported to my itunes account via my laptop. In the past when i connected my ipad to my laptop to sync it would ask if i wanted to transfer from ipad or not. This does not happen now at it goes straight into sync mode.
Hi,
This sounds so frustrating. If any processing of sound, e.g. through Logic, through Wiretap, or you might try Garageband (which I assume you have tucked away somewhere), produces the problem, then its hard to blame the software of the individual program. This leaves OSX and/or Coreaudio, or a hardware problem. Sorry if you've already reached this stage. This would mean a reinstall of OSX (or an upgrade, if you're thinking of it), or addressing the hardware issue. I know I had some very bizarre things (and repetitive) happen to me with faulty memory, or memory that just wasn't seated properly in its slot. You could start out by running the hardware test and go from there.
Good Luck,
Ray -
8800 does not power on but shows the charging symbol! HELP!
Hello everyone,
I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
It arrived two days later and seemed in great physical condition.
So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
THANKS IN ADVANCE.
Please help ASAP.
MirzaHow are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.
-
I'm conecting my Ipad to the computer to charge and it shows the charging sign for a few seconds then says not charging, do I need to bring it in to get that fixed or is there something I can try to do on my own?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :( -
My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help
If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.
-
Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?
iPhone not appearing in iTunes
-
So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....
No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.
-
My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?
If the Reset didn't work, you'll need to do a Restore.
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad. -
Had Power Adapter replaced, battery icon not showing charge
Hello, hoping you guys can help me out. Recently, my power adapter had burned out (wouldn't show charge/light up at all). I've had it replaced as of today and is working fine (Whoo!), but now a new problem's come up.
I admit I used my battery to it's limit while waiting for the new adapter, and while the light on the adapter is green, the battery icon on my screen is showing 0%. Pressing the button on the battery only gives me one green light.
I've heard something about Re-Calibrating the battery in my manual, but I'm unsure if that's the best course for my case. Here's my Power System Profile, if it helps:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3775
Remaining Capacity (mAh): 0
Amperage (mA): 0
Voltage (mV): 9821
Cycle Count: 56
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: No
Hardware Configuration:
Clamshell Closed: No
UPS Installed: NoRe-calibrating the battery is typically done with a new battery, where you charge it all the way up, then run it all the way down a couple of times. This calibrates the battery's internal electronics to the actual capacity of the battery. Not a concern here.
Looking at your battery stats, is your battery fairly new? It is showing 56 charge/discharge cycles, does that sound about right? Reason for asking is, if the battery is old, like maybe the original battery that came with the system, sometimes a dying lithium battery throws up screwy stats. If it is an older battery, that may be why it's not charging ... it's dead. However, if it is a newer battery ....
There's only 4 components to the charging circuit - power adapter, dc-in card, battery, and logic board. You have a new power adapter, and the system is seeing the 65 watt power adapter, so the power adapter and dc-in card appear to be OK. That leaves either a battery issue or a logic board issue. Do you have another battery you can swap in, or a friend with the same model PowerBook, or an Apple store nearby? If you swap another battery in, and it starts charging, and the current batter is an older one, then replace the battery. I used this one on mine, and others have had good things to say about it: http://eshop.macsales.com/shop/powerbook/battery/g4-15inch-aluminum/ . I would stay away from batteries sold on ebay, as there have been a number of people very disappointed with the lack of quality in the battery they bought.
If another battery won't charge, that would point to a logic board issue. We just had that on one of our PowerBooks, where it would charge, and it wasn't a power adapter, dc-in, or battery problem. The Apple store sent it off to the Apple Depot, for around $350, and they replaced the logic board as well as the battery. If they do more work, like replacing a dented case, the price goes up. If the Apple store replaces the logic board in the store, it costs around $750 or more. -
My Ipod 4g will not stay charged. He charges it to show full battery
My sons Ipod 4g will not stay charged. He charges it to show full battery & will only work for 20 mins or so. I have tried resetting the whole Ipod, we have tried a wall charger instead of computer charger, he has removed items off thinking they were to much for the Ipod. Nothing works.....
If you successfully (went through all steps without errors) restored the iPod to factory settings/new iPod and still have the problem that indicates a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
-
Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light.
Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light. I have tried pressing the small button on the side of the macbook pro to check the battery, but no lights show up.
Hey Angelo_here,
I'd run through these steps:
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh -
My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!
Intel-based Macs: Resetting the System Management Controller (SMC)
Maybe you are looking for
-
on my iMac, when I view messages there is a grey number at the top of the message. This number denotes the amount of messages from that sender and when I view the most recent message in my mailbox (from that sender) all of the older messages load wi
-
How do I convert a document into a jpeg?
How do I convert a Word document into a jpeg?
-
Is it mandatory to have NWDI for building custom classes in ISA.
Hi All In the development guide, I see that for extensions and modifications, we go through NWDI. But till ISA 4.0 we used the ANT Build tool. Can someone please help me out with extensions is CRM-R/3-ISA B2C applications. We are upgrading from ISA 4
-
Email links in Firefox 5.0 will not auto open in Outlook 2010 AND Windows Live Mail 2011
Outlook msg: General failure. An error occured in sending command to the application. Windows Line Mail: There was a problem sending command to the program.
-
Hi, My users wants Print of PR...Though i told them that PR is an internal document and SAP doesn't provide and smart forms for PR..But they are not getting convinced and they arre requesting smart form for PR... Is there and user EXIT or BADI for th