PlayBook Power Charger

After three months, the Charger that came with my playbook stopped charging.  I can use a different device and it works fine, ie the usb cable to my PC.
Has anyone else had the charger fail?  What was your course of action?

Go get yourself the rapid charging desktop one. It uses the magnetic contacts instead of the fragile usb port.
Be a Shepard and not an iSheep.

Similar Messages

  • Forum Mods, Please make this a sticky: BlackBerry PlayBook battery power charge, discharge characteristics, and guidance on extending battery life

    BlackBerry PlayBook battery power charge, discharge characteristics, and guidance on extending battery life
    KB27705
    Overview
    The BlackBerry PlayBook may come to a power state where it is unable to power on; a Yellow LED may flash in a sequence of 5 flashes, the BlackBerry PlayBook may boot up to the BlackBerry PlayBook Logo and then power off, may not power on at all.
    Discharge behavior under normal use:
    Under normal active use, a battery drained to 10% will cause the device to prompt the BlackBerry PlayBook user (notification and audible beep)
    Without connecting a charger the device will automatically shut down at 3.53V (0%)
    Pressing the power button may allow successful boot, but it will turn off again very quickly
    Discharge behavior under no use:
    A device left unused but in ‘Stand By’ will warn the BlackBerry PlayBook user at 10% (notification and audible beep)
    The warning may not be noticed and the device will go back to ‘Stand By’
    Letting the device drain in standby mode drains the battery slower, but more completely
    Device will still shut off at 3.53V (0%), but it less likely to successfully boot afterwards
    Discharge behavior under 3.53V (0%):
    If the device is left to shutoff, the battery will continue to drain below 3.53V due to quiescent current draw from the motherboard and the battery fuel gauge
    With the battery between 2.7V-3.53V, pressing the power button causes the LED to flash a pattern (1 solid red light followed by 5 yellow blinks)  to indicate low battery (PlayBook Tablet OS version 1.0.5, and above)
    Below 2.7V there is no activity, or LED pattern displayed
    Charge Behaviour:
    The provided charger should be used to charge the device. The optional 12 volt rapid charger is may reduce charging times
    to approximately 3 to 4 hrs. Standard Blackberry smartphone chargers, other AC adapter USB chargers, or computer USB ports
    are not recommended for the sole purpose of charging the PlayBook as with these methods it may take more that 12 hours to
    charge the BlackBerry Playbook.
    If the battery voltage is below 3.53V(0%) then the charging behaviour is dependent on the software version.  The charging code will limit the charging current to under 400 milliamps, during which time, it may take an hour to reach 3.53 Volts. Once the battery voltage rises past 3.53 volts, then "high-rate" charging will start. If, after charging the Tablet for 4 to 6 hours still does not result in LED activity, attempt to force power on the BlackBerry Playbook by pressing and holding only the Power Button for only 20 seconds.
    Prior to BlackBerry Tablet OS 1.0.5:
    A BlackBerry PlayBook will never charge while powered off in BlackBerry Tablet OS versions prior to 1.0.5.
    The device will show a red light when the charger is connected and then nothing more
    Repeated connection of the charger can recover the device in some instances. 
    Once the battery voltage rises above 3.53V the system will boot and the UI will show charging
    Starting in BlackBerry Tablet OS 1.0.5:
    The device will show a solid red LED, followed by a solid yellow LED as the device boots into charging mode.  This is followed by a yellow pulsating LED indicating charging in progress.
    The time span between the red and yellow lights can be as long as 45 seconds as the device boots into charging mode. 
    Once the yellow LED illuminates, the device can be started, but it is advisable to let it charge for at least 3.5 hours to achieve a sufficient charge.
    The device will show a solid green LED once the device is fully charged.
    Starting in BlackBerry Tablet OS 2.0.1:
    Once the yellow LED begins pulsating indicating charging mode, if the BlackBerry PlayBook is disconnected from the charger, the following graphic will be displayed on the screen, indicating charging is not complete, and to reconnect the power source. The graphic will be displayed for 20 seconds before the BlackBerry® PlayBook powers off if the power source is not reconnected. The same graphic will also be displayed if the BlackBerry PlayBook is turned on and there is not sufficient power to perform the boot process.
    If the BlackBerry PlayBook is plugged into a power source, and the power button is pressed to power on the device, the following graphic will be displayed if there is not sufficient power to perform the boot process. If this occurs, the BlackBerry PlayBook should be left plugged in to gain enough charge to boot.
    Additional Information
    Turning off the BlackBerry PlayBook and using standby mode.
    Checking the battery power levelOn the status bar, tap the battery icon. When the battery power level is low, the BlackBerry PlayBook tablet will display a notification.
    Enter standby modePress the Power button on the top of the BlackBerry PlayBook..
    Exit standby modeSwipe down from the top frame to the bottom frame
    Turn off the BlackBerry PlayBookPress and hold the Power button. Tap Shut Down.
    To extend the BlackBerry PlayBook battery life, charge it regularly, close unused applications and keep the BlackBerry Playbook out of the sun and other hot places. The following may also be used to extend battery life:
    Dim the screenOn the status bar, tap the Options icon (a gear), select the Screen tab and change the Brightness setting
    Turn off the screen automaticallyOn the status bar, tap the Options icon, select the Screen tab and change the Backlight Time-out field
    Enter standby mode automaticallyOn the status bar, tap the Options icon, select the Screen tab and change the Standby Time-out field
    Turn off Wi-Fi when not in useOn the status bar, tap the Wireless icon and set the Wi-Fi switch to Off
    Turn off Bluetooth connectivity when not in use
    On the status bar, tap the Bluetooth icon and set the Bluetooth switch to Off
    Pause apps when you show the home screen or switch between apps  On the status bar, tap the Options icon, select the General tab and set the Application Behavior switch to Paused
    With the upgrade to PlayBook OS 2.1.0.1032 the following message may be displayed when connecting the Playbook to a PC using the micro-USB cable:
    Unable to charge battery with connected source
    This message is displayed because the voltage provided is insufficient for charging. The USB voltage is limited to 384mA even if the maximum tolerance is 500mA. The voltage is limited to 384mA by design to avoid violating the USB specification which states USB devices cannot draw more than 500mA from the USB port.

    TroyTempest wrote:
    I guess it's not what you know but whom you know. 
    Yup! Glad you're here though. I appreciate your contributions in the forums myself.

  • Can I use the same power charger in another country (South Africa) and just but a socket adapter?

    I am moving to South Africa from the US for a year and want to know if I can use the same power charger in South Africa and just but a socket adapter or do I need to get a new power charger for S.A.?
    This question was solved.
    View Solution.

    Hi,
    Nowadays laptop chargers can be used for normal electricity around the world (110V to 250V). All we need is a small plug adapter similar the the ones we use to travel overseas. Most electrical shops, travel agents and airports ... sell them.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP DV6000 series laptop - Shut down immediately as soon as I connect the power Charger

    Hi,
    I am using a hp dv6000 series laptop for last 2 years....  Accidentally, water fell on my laptop and then my laptop itself fell down from the table.
    One the first day when I tried restarting it  there was no response ( No power LED no display nothing, no cpu fan etc ...)
    I disassembled the laptop, cleaned the RAM hard disk, front bezel, keyboard. I used a hair dryer to dry out any of the moisture. My laptop then started showing some response ... now after 4 days .... it is working all fine except the display...
    The problem is :
    1. The Laptop backlight is not working... (but I can see the display with a external flashlight pointed to screen)
    2. The laptop works fine on battery... but as soon as I connect the power charger... it immediatly shuts down.
    Currently because of display problem... I am using the (RDP) windows remote desktop connection from an another laptop to access the desktop.... I logged on from another laptop and checked that all the internal harware parts are working fine.
    Also, sometimes suddenly randomly the display backlight starts working fine and goes off randomly.
    Please suggest. I seached all the online help but I have found no help on "Shut down immediately as soon as I connect the power Charger"...
    thanks.
    Yogi

    yogkoli wrote:
    Hi,
    I am using a hp dv6000 series laptop for last 2 years....  Accidentally, water fell on my laptop and then my laptop itself fell down from the table.
    One the first day when I tried restarting it  there was no response ( No power LED no display nothing, no cpu fan etc ...)
    I disassembled the laptop, cleaned the RAM hard disk, front bezel, keyboard. I used a hair dryer to dry out any of the moisture. My laptop then started showing some response ... now after 4 days .... it is working all fine except the display...
    The problem is :
    1. The Laptop backlight is not working... (but I can see the display with a external flashlight pointed to screen)
    2. The laptop works fine on battery... but as soon as I connect the power charger... it immediatly shuts down.
    Currently because of display problem... I am using the (RDP) windows remote desktop connection from an another laptop to access the desktop.... I logged on from another laptop and checked that all the internal harware parts are working fine.
    Also, sometimes suddenly randomly the display backlight starts working fine and goes off randomly.
    Please suggest. I seached all the online help but I have found no help on "Shut down immediately as soon as I connect the power Charger"...
    thanks.
    Yogi
    It sounds like the LCD power inverter has been damaged and would need to be replaced.  As far as the AC adapter/battery issue, I'm not sure.  It sounds like you need to retire this notebook early. 

  • Where can I find a power charger for my G3 ibook

    Just broke my 4 year old g3 iBook power charger by walking into the cord and snapping it off at the power source. Where can I find a replacement power cord charger for this 750pc G3 iBook?

    There are third party choices for an adapter, also:
    MCE Technologies
    http://www.madsonline.com/index.html?
    MacAlly adapter at Amazon.com
    Micro Accessories adapter at Other World Computing
    Apple's is the only one with the glowing ring to indicate charging status, though, and can be found here:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M89 43LL/A
    I believe the one from Other World Computing is one of the sturdiest of the lot. The MacAlly adapter's cord is a bit flimsier than the one from Other World Computing, but both are working fine on our iBooks. We haven't tried the pricier ones.
    If you have further questions about your iBook G3 (Dual USB), you may want to try posting in the iBook G3 (Dual USB) Forum.
    You have posted in the iBook G4 Forum.

  • Can I use the power charger(85W T Connector) with MBP(17 inch 2010 mid)?

    Hi I have a MBP (17 inch 2010 mid). It uses a 85W L Connector. But today, it is not working anymore.  And I found a older charger 85W T Connector is work with it. But I want to make sure it will not break my batter when a long time usage. Does anyone know it?
    Thanks in advance.
    TO APPLE GUYS,
    Why the material of your cable has so bad quality? It seem easy to aging. Not only the Power charger, also with your earphone cable and other USB cable.

    Thanks. It can work. But the Apple serivce guys told me it make harm my battery. I don't know why. So I want to make sure at here.
    I just wish the apple guys could read it in their free time.

  • My iphone 5 cannot restart in itunes or by the power charger.  The apple icon keeps flashing

    my iphone 5 cannot restart in itunes or by the power charger.  The apple icon keeps flashing

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • BlackBerry Z30 compatible power charger

    Hi All,
    I have bought my Z30 with a power charger in the box with the following specification:
    RIM Part No.:HDW-46445-001
    Input: 100-240 V ~ 100 mA 50-60 Hz
    Output: 5V - 850 mA
    I would like to know if I can use a BlackBerry power charger with the same input, but with diffrent output e.g. Output: 5V - 750 mA.
    Option 1: Part No.: ACC-39501-201
    Option 2: Part No.: BlackBerry USB Charger HDW-29713
    Input: 100-240V / 50-60Hz / 150 mA
    Output: 5V / 750 mA
    Solved!
    Go to Solution.

    tezytan, that's a very poorly written blog article. Yours?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Power charger doesn't  work

    I bought iPhone5 last week, and its already broken, had to go to the store where I bought it, then they said I had to go to Apple store, then I went to the apple store on Grandcentral, and had to wait for 3 hours, and their attitude was pretty BAD. I spend metrocard, and I took day off for this incident. AND NOW, this iPhone's power charger doesn't work! I call to Apple, and their attitude was also REALLY BAD! I DEF NEED my iPhone charger ASAP, and I REALLY WANT THEM to refound my metrocard charge to go back and forth this annoying issues!!!!!
    The Apple couster service person's name is MICHEAL OLIVER. His attitide was very very BAD!!! I told him I've been a MAC user since 1995, and had a bad experience for my 3rd MacBook ( within 6month its broken twice!), and this time is more annoying costmar service ever!!!

    I'm sorry to read about your bad experience but you're not addressing Apple here. We are all users just like you. Please give Apple feedback here > http://www.apple.com/feedback/

  • Playbook donot charge stuck at 0%

    my playbook doesnot charge, 
    when its connected to wall charger
    red light comes and go ,only indication of green breathing light comes
    its has been connected to wall charger for whole night still it is at 0%
    please provide me with solution

    Hello basra0013, 
    Welcome to the forums. 
    We suggest contacting direct PlayBook support for further investigation into this issue: http://bbry.lv/MCTdax
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Does Dell AC511 Soundbar Need To Use 'Power Charging' USB Port?

    Is it possible to connect the Dell USB Soundbar AC511 (for Dell UltraSharp U2414H Monitors) to any USB 3.0 port or does it have to connect to a USB 3.0 Power Charging/Battery Charging Port (BC1.2)?

    Yes I did, but it isn't clear. 
    As a Dell employee, the fact that even you needed to state that is how you "interpret" the manual, shows the information in the manual is inadequate, otherwise you would've given a definite reply.  Which leads me to "interpret" your reply to mean basically you're just guessing.

  • Ipad 3 power charger on iphone 4s

    if its possible to use the 10W power charger from ipad3 also use on the iphone 4s, or its not recomned and the iphone will be destroyed?

    You can safely use it : http://support.apple.com/kb/HT4327
    If you do it the other way around (the iPhone charger with the iPad), then you will find the charging of the iPad very slow.

  • HT1414 my ipad mini will not charge from wall socket and it will not show itself on i tunes via my pc... i have also substituted my power charger from my i-phone to no avail.

    my daughter's i-pad mini will not charge up from the wall socket and it will not show itself on i-tunes via my pc... i substituted the power charger from my i-phone to no avail with the wall socket... seems like i read that the earlier i-pads have some problems with the lightning socket but can not remember exactly...there is no apple retail shop in the small city where i live but would travel to one if the fix is relatively quick or easy...otherwise, what can i do for diagnosis and repair?

    Most likely your cable is bad and you need to get a replacement.
     Cheers, Tom

  • HT1476 Can i use wall power charger 5v 1A to charge Ipod touch5 or only via usb?

    Can i use wall power charger 5v 1A to charge Ipod touch5 or only via usb?

    5volt 1amp charger is standard for charging the iPod (5watts). Using a USB port can take longer because the charging current can be somewhat less than 1amp. So you are better off using the wall charger.

  • I just bought a new 10watt usb power charger and it says not charging?

    I just bought a new 10watt usb power charger and it says not charging?

    Maybe the charger is OK , but the cable may be damaged.

Maybe you are looking for

  • Random kernel panics going on for a long time, desperate for help!

    Hi, I didn'nt quite know what to name this thread, but I will try to describe the problems I have with my MacBook Pro here. I have a mid-2009 MacBook Pro and the problems started more than a year ago. They are present under both Snow Leopard and Lion

  • Installed new software, after restart black screen with Darwin/BSD promt

    Hi I have been struggling with thisissue. I installed some new software, a webcam driver called ilook 1321. I restarted my computer but forgot to take the disc out! Now when I start my ibook G4 i get the black screen with Darwin/BSD (localhost) (cons

  • What does "start up disk has no space" mean?

    My iMac, version 10.6.8, all of a sudden has a pop up window that says 'your start up disk has no more space.  Please force quit these applications to continue.'  What does this mean? 

  • PLEASE HELP! How can I reset my E90?

    Please let me know how I can reset my phone as though it just came out of the box. I have used the Factory Reset in the menu but all of my contacts, calender etc are still on the phone. I am giving my phone to my son and want it to be like it has jus

  • How do you find out the name of a file in a specific folder

    The problem I have is that I want to read from a file located on the harddrive. I know where it is located and that it is the last updated folder, but not the name of it. The reason for why I want the name is that I want to read som values from that