Playbook red light flashing 1 long 4 short, will not charge, not able to connect to PC

I have many Playbooks in my family; my younger son's Playbook will not charge just flashing 1 long 4 short red lights.  I used a good logic board to charge the battery to full 100%, then put the problem  logic board back, it still flashing red lights. The problem is causing by my son has left the battery drain too low (no physical damage to the tablet); according to your suggestion to upgrade the OS to solve the problem, but my PC could not see this tablet (I know the USB port is good).  My question is the logic board beyond fixing, I have tried the button methods, none of them worked. Any suggestion?

You can find the latest available software update information on our product blog.
If want to know more about software roll out process and how it works please see this topic.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • 8700 will not start,red light flashes and hourglass comes on and off

    I have an 8700g Blackberry phone and I mistakenly downloaded an application that is only supported by software version 4.0 or greater. ( my phone had software version 2.2? ) . I had to replace the battery today and when I put in the new battery, it tried to start up but the red light comes on and the hourglass flashes on and off but after two hours it will still not start up. What should I do?

    Kendal wrote:
    Hi there,
    My bb did the same thing, but when i did what you said, the app loader said that there is a fatal error, and that the code is [A:0x0000000E]; and a red light flashes twice in quick succssion on the bb, can you please help me out here? thanks K.P. :-)
    Hi and Welcome to the Community!
    Hmmm...that sounds very bad. But, let's try some things anyway...a total wipe and reload, using one of the following utilities:
    http://forums.crackberry.com/forum-f3/how-wipe-jl_cmder-53502/
    www.bbsak.org
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Black screen, red light flashing

    I was downloading an app when a screen message told me to restart to continue installation. I pressed the Off button but now, despite pressing the start button, the phone will not come alive, although it was recently charged. There is just a black screen and the small red light flashes occasionally.
    Solved!
    Go to Solution.

    Hi HarryTyrrell
    Welcome to BlackBerry Support Community Forums
    Pressing the Off Button is not the Correct way to restart our BlackBerry device, please perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot. See if that helps.
    If not then try Starting your device On Safe Mode and on Safe Mode Uninstall the Application your Downloaded recently or which you think is responsible for that.
    KB17877  How to start a BlackBerry smartphone in Safe Mode
    Try it and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Phone wont turn on and red light flashing 5 times with pause/s in between

    i was charging my phone, after 30 minutes i unpluged the plug from the mains and typed in my password. from there on the phone went completely blank and all i was seeing was a red light flashing. I charged the phone for 12 hours and now i cant see the red light anymore. The only time i see the red light flashing is when i use the usb or the phone charger. At the moment the phone is completely blank i cant switch it on. Also ive tried using the usb which didnt help my laptop doesnt recognise it neither does the desktop manager.
    Message Edited by SgtAssassin on 10-11-2009 05:22 AM

    Hi and Welcome to the Community!
    Without the use of the charging port, tests will be more difficult, and results less definitive. Nevertheless...this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note please that "known good" and "new" are not necessarily the same thing...while rare, a new battery certainly can be defective. The best (and, btw, least costly) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    If the result is that your BB is the issue, then you will need to seek out a local (to you) shop with a qualified BB hardware technician to give you a proper evaluation and estimate. If you remain in warranty, you could instead seek support under those terms (assuming your warranty is not void).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Won't boot only red light flashing

    My BB Z10 unable to boot or charge once the battery all used up.
    When I plug to wall or PC, only red light flashing.
    Sent for repair twice, just return with a full charged battery device.
    Once I used all the battery it won't charge.
    I have to recharge the battery before it's all gone,
    Or you have to follow the steps to reinstall the OS make it charge again.
    Does it make sense? Will you accept that?
    Means if I did not charge my Z10 before battery all gone, I have to do the OS recovery and ALL THE DATA GONE.

    Hey panda1111,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps below to try and bring the BlackBerry Z10 back to life:
    Ensure that BlackBerry Link is installed on the PC or Mac OS
    Ensure the computer has an internet connection.
    Launch the BlackBerry Link Software.
    Note: A backup of the BlackBerry device should be tried before a reload.
    Turn off the BlackBerry device. Make sure there are no flashing LEDs and that the LCD is not still being lit by the backlight. If there are any flashing LEDs, hold the power button for 15 seconds until the LEDs stop.
    Connect the BlackBerry device to the computer.
    When prompted with Cannot communicate with device, click Restore and then click yes allow the update to be downloaded and installed on the BlackBerry device.
    If the restore button is not seen press the vertical dots in the lower right corner of BlackBerry Link and select disconnected device.  Highlight the disconnected device you are working with and attempt steps 4 to 6 again.
    If the issue still persists, then I suggest contacting your network service provider for repair options. 
    Let me know if you have any more questions.
    Cheers.
    VIA | ViciousFerret
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/BB-Z10-Died/m-p/2230087#M10125
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Q10 has locked me out completely. Won't turn on but red light flashing to specific pattern

    Help! Turned my Q10 off yesterday to reset as emails not getting through. Now won't turn back on - just a little red light flashing at top right of device in a specific pattern. Nightmare-any ideas??

    Connect your Q10 to the known working OEM wall outlet charger.
    After being connected several minutes, LEAVE it connected and remove the battery a minute, and reinsert... does it reboot?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry 8100/8110 Red Light Flashing

    It seems this is a common problem.
    I loaded my Pearl 8110 or 8100 with a sh**load of music, pics & videos.
    when i went to access them, play them or slideshow them, I noticed it took forever...attempting to ease the memory load on my phone, i started deleting, from the phone itself (not while connected via USB), songs, pictures, folders thereof, etc.
    then it died.
    and it wouldnt re-start. pulled the battery, tried to sync it, tried to update, tried everything...the computer WONT read the phone...the update keeps getting stuck on re-initailization and when i finally cancel, it says "UNABLE TO UPDATE USING A MULTI-STAGE UPLOAD" or something like that.  it's almost as if the usb port got fried...it momentarily connects when the red light flashes on, then disconnects when the red light flashes off.
    i've read thru 3-4 pages of posts on this without any hope in sight.
    is it futile?  or is there something i havent tried?
    --- 707rider

    I posted this message here:
    http://supportforums.blackberry.com/t5/BlackBerry-Pearl-BlackBerry-8100/Phone-stuck-on-connecting-to...
    This was my post:
    This website has a good solution. It seems to work for most people. My 8100 wasn't nuked, but I needed to reinstall the OS. I followed his instructions and it worked.
    I don't know if we're allowed to post links on this forum, but I'll try. If it doesn't allow the link, then Google "crackberry reload operating system nuked blackberry" and it should be the first link. Just look for the crackberry site.
    Here's the link (hopefully):
    http://crackberry.com/blackberry-101-lecture-12-ho​w-reload-operating-system-nuked-blackberry

  • HP desktop won't start, red light flashing and beeping, loud fan

    Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
    It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
    Any help? Thanks.

    Hi
    I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Desktop Computer dc5750 shuts down and red light flashes on front of computer and won't start at all

    I have a DC5750 HP Compaq Computer it is 6 years old, but I have 4GB Ram, Nvidia GS8400 Graphics Card, two one TB Hard Drives. While I tried to re-installed my operating systems it all of a sudden shut down not once but twice, I opened up the side of the computer and found that it was hotter then normal. I let it sit for a while thinking it maybe over heating after hooking it back up I turned it on again nothing happened except a beeping noise and red lights flashing on the front. Can this be fixed as money is an issue.
    Thanks
    Rob

    Hi, Rob:
    Please review Appendix A. starting on page 56 of the Troubleshooting Guide at the link below to interpret the beep codes and see the probable causes and recommended troubleshooting steps.
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.BINARYPORTLET/public/kb/docDisplay/resource.proc​...

  • Red Light flashing help

    Hi, I have recently got a curve and after loading the pc software & connected my blackberry to it, it updated etc then my phone went blank and has 2 blinking red lights flashing...anyone know how I can reset phone thanks

    Hi..
    Try the below link for the OS downloads..
    https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html
    thanks..
    Please update the result after applied..
    Thanks

  • Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

    trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
    This question was solved.
    View Solution.

    You can try removing and reseating the memory and see if that works.
    If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

  • My iphone4 when connected to any computer will not charge and is constantly connected and disconnected.  does the same with itunes.  Also i'm talking on the phone and all of a sudden the other person can not hear me.

    My iphone4 when connected to any computer will not charge and is constantly connecting and disconnecting.  It does the same with itunes so it doesnt really sync.  Also when talking to someone, all of a sudden they cant hear me.

    I'm having the same issue. I went to my local apple store and they could not work me into the genius bar so i made an appointment for tomorrow morning. The clerk did check the phone for the pink indicators at the top and bottom of the phone (where you plug in your USB or headphones) He said if you can see a pink indicator dot you may have gotten it wet, or had some sort of condensation in it, which could cause the plugs to not work.
    In regards to people not being able to hear you, i'm waiting for my appointment tomorrow for more news! I would recommend taking it into your local apple store for more answers.

  • My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

    My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

    If the Reset didn't work, you'll need to do a Restore.
    From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad.

  • Are there any iPod Speakers that do NOT charge your iPod when connected?

    Hi there,
    I'm looking for an affordable iPod speaker that does not charge or gives you the option of not having your iPod charge.
    I know people who keep attaching their iPod to the dock speakers that they have, and it constantly keeps charging and that literally killed the battery on their iPod's.
    I know there is the Logitech MM32 (connects through headset jack), but not sure if that is compatible with the new Nano 3rd Generation.
    Does anyone know of any other speakers that does not charge your iPod while connected (when connected to the wall outlet -> AC) or gives you the iPod not to charge the iPod?
    Thanks in advance!

    Constantly charging does NOT kill the iPod battery, it is a myth.
    Once the battery is charged the main charging stops and it is switched to 'trickle' charge which means it get a slight charge every so often.
    There is not problem at all in keeping the iPod topped up, just make sure you discharge it fully approx once a month as per Apple's instructions here :-
    http://www.apple.com/batteries/ipods.html
    And general battery advice here :-
    http://www.apple.com/batteries/
    The key is the number of full charge cycles you o through, if you only ever keep topping up the battery then you will not go through full charge cycles very quickly. If you only ever top up the last 5% of the battery then you can do this 20 times and it will only count as 1 charge cycle. Based on the 400 they say you can get from a battery before the capacity drops to 80% that would mean you could top up the battery that last 5% over 400*20=8,000 times.
    Ian

Maybe you are looking for

  • Ver 4: Still no support for Includes or Design Time Stylesheets?

    Wow...well, without either of these I can't make use of this product. I guess I'm confused at what types of users this product may be marketed toward, although with the amount of focus put on Blogs and Blogging and lack of focus on requests already m

  • Individual Bass Control for Front/Rea

    Hey everyone! I was wondering if it is possible to control the bass and treble settings for each output on my soundcard individually, ie: the front and rear speakers. The reason I ask is because I have really nice speakers connected to the rear outpu

  • Credit Management in CRM - transfer of blocked documents to ECC

    Hi, we want to implement credit check in CRM using CRM. Our client requirements are: - Sales order is created in CRM - Credit check is executed in CRM, using information from ECC - If result is negative, sales order credit status must be updated to "

  • HT1420 How do I deauthorize a lost computer?

    I need to deauthorize my itunes account on a lost computer; how do I do this?

  • Contacts.App - Duplicates Issues

    Every time I click Card>Look for Duplicates... the results come back with "3 cards containing duplicated information were found." I choose Merge and click on Card>Look for Duplicates... and the results come back with "3 cards containing duplicated in