PlayBook set-up problems ... stuck on Blackberry ID Agreement page

I realise this seems to be known, but its new to me and I can't find a solution that works in the fora, or by using Google, or whatever.
Contacted Technical Support, but perhaps you recognise the problem (cannot select country and language on the agreement page: nothing in the dropdown box) ...
I know some US units had to be recalled, but in the early days and not in August in Austria (Vienna).
Any suggestions apart from throwing it away?
David Dickinson

try to connected to a computer via Desktop Software, or search for another wi fi hotspot

Similar Messages

  • 5800 set up problem, stuck in "contacting server"

    I have a big problem, I'm not able to use nokia messaging, it gets stuck after I write my e-mail address and paswords, the screen says "contacting e-mail server" and it lasts forever. I waited for over an hour yesterday and I had to cancel the process -I needed to make some calls
    I used nokia messaging on this same phone before, but I did a hard reset of the hard drive so I had to download and install it again. That's all I can add. And of course I'd like to know what to do,

    yeah same with me .. Im get stuck at c0ntacting email server ..my ph0ne is n97 mini
    Nokia made me pr0ud !

  • Blackberry ID agreement problems

    I am trying to setup 16GB playbook. It lets me connect the Internet, and will set up the time and date, but when i try to select United States as my country, it says that is unable to display the Blackberry ID agreement. Is there anything i can do to fix this?

    I am having the same issue. This KB article doesn't fix the problem because from what I can tell there is no way of going back. Once you are on the "Blackberry ID Agreement" page there isn't a way to go forward or back without hitting "I Agree"
    I've tried plugging in and using Desktop Manager but it immedialty pops up and says it cannot continue until you finish the setup processes. I cannot find a hard restore option and everytime I reboot it goes right back to this page! Have I found an infinite loop 2 minutes into using the device? Any help would be greatly appreciate!
    I think the reason this is happening is because I have it connected on a corporate network and it doesn't have the proxy setup to get to external website where it is trying to pull the BB Agreement from. I will take the playbook home with me and see if it prompts about being disconnected and asks me to connect to my home network. 
    Will post back if this fixes the problem.

  • Q10 reboot stuck on Blackberry logo after reset update from OS 10.1.. to 10.2.0.4...

    Hi All,
    I was update my OS from 10.1 to 10.2 last night via OTA, 100% complete the donwload but when is restart and loading it stuck on the Blackberry Logo eventhough is 100% complete the reboot loading screen.
    Is there anyway to solve this problem? I tried few reference from this site but still can't solve the problem.
    Thanks in advance,

    Hi Mondo1 and welcome to the BlackBerry Support Community Forums!
    Try pressing Alt+the Up Arrow+Delete to see if that will force a reboot on your BlackBerry Q10.  Let me know if that works.
    Thanks
    VIA | Cpt_Sweatpants
    http://supportforums.blackberry.com/t5/BlackBerry-Q10/Stuck-on-bb-logo/m-p/2446567/highlight/true#M3...
    plug your phone in to your PC, remove the battery, open BlackBerry Link, wait for Link to tell you that no phone is connected then replace your battery.
    Let us know if that helps you.
    VIA | BillJ
    http://supportforums.blackberry.com/t5/BlackBerry-Q10/New-OS-Stuck-at-Blackberry-Logo/m-p/2523007/hi...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • [Bug] Sometimes Z10 stuck at BlackBerry logo

    Hi,
    I want to report a bug to BlackBerry. It happens quite rarely though. When I restart my z10, it stucks at BlackBerry logo. It either doesn't shutdown or fails to start but stuck at the logo.
    It happens about 2 times from 7 times. Then I have to reinsert the battery to reset the things.
    I am on the latest OS. Hope BlackBerry will fix this bug in some software update.

    what OS are you on now?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Setting up the I Pad for the first time I am stuck on the wi fi page it can see the network my pc cant see the i pad

    setting up the i pad for the first time i am stuck on the wi fi page it can see the network but my pc cant see it

    Since you have a modem/router, you must continue to use the Beetel modem/router on your network.
    The Time Capsule can connect to the Beetel modem/router using a wired Ethernet cable connection and produce a separate wireless network.  You would NOT want the Beetel router and Time Capsule to both try to produce the same wireless network if they are located close together, since this will likely create interference problems that may prevent devices from connecting to either the Beetel orTime Capsule wireless network.
    The exception to having the Beetel modem/router and Time Capsule produce the same wireless network would be if you can locate the Time Capsule at least a room or two away from the Beetel modem/router.  An Ethernet cable can be run up to 300+ feet or about 100 meters with no signal loss, so you should be able to locate the Time Capsule anywhere you want.
    Are you able to consider this option?
    Another option.....if you cannot locate the Time Capsule in another room......would be to configure the Time Capsule to use the same wireless network name and password as the Beetel network and turn off the wireless on Bettel modem/router.
    Important.....there is no guarantee that the printer will be able to connect to the Time Capsule wireless network, so you should expect to start over and set up the printer again.
    Yet another option would be to turn off the wireless service on the Time Capsule and use the Beetel wireless to back up your computers to the Time Capsule, which will act as a wired hard drive for the network. If you select this option, the Time Capsule can be located close to the Beetel modem/router.

  • Problem in my Blackberry Q10

    i like to ask Blackberry, i buy Blackberry in March 2015, and find one problem when i remove the battery to change the sim card, when put again the battery to open the phone, the phone is reset all the things when i setting, i use long time Blackberry phone dont have this problem, and the Q10 im not the first time use this my second Q10 because the first is broke, but i use the first dont have this problem, can you give  me the answer what happen for this is the OS have problem or the phone have problem

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:Article ID: KB36747 All data is deleted following a manual restart of the BlackBerry 10 smartphone and a blue LED is displayed during boot upHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
    Good luck and let us know!

  • Strange Problem with my Blackberry's Email

    I have an unusual problem with my Blackberry's e-mail set up.  When I get a message from my e-mail account, it shows up in the Messages folder, but in the specific e-mail account's folder, it does not show up at all.  I've checked and made sure that all messages is selected for the specific e-mail folder.  It is a Gmail account.  For some reason, those emails only show up on the 'Messages' section and not the specific email section.
    Any help with this issue is appreciated.

    Follow up: I've done some investigating and noticed that my "Inbox" doesn't appear under the "Filters" section on the email account.  Since this is gmail, should i look into my gmail settings, which appear to be fine, or is there a way I can add my inbox to that list on my blackberry?

  • My home button is working intermittantly. Have Restored setting. still problem. Any ideas?

    my home button is working intermittantly. Have Restored setting. still problem. Any ideas?

    Did you actually restore the iPad? Or just restore settings?
    If you haven't "restored" the iPad...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If a restore doesn't work...  >   Apple - Support - iPad - Hardware Service

  • I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    Hello zukafu, 
    Welcome to the forums. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
    Thank you
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Oracle to Mysql character set conversion problem!!! PLZ IGNORE

    Hi Experts,
    I have created a database link from Oracle 10g to Mysql 5.
    I have installed Oracle Gateway 11g for this purpose.
    When i retreive the data from sql plus the text is displayed as question marks.
    Oracle 10g Database character set is WE8MSWIN1252
    Mysql character set --->latin1
    Character set of ODBC connector for mysql is  latin7
    Character set in the parameter file of HS folder is WE8MSWIN1252When i retrieve data from sql developer the text is fine(as i think it directly takes the character set of target) but
    when i login from sqlplus i get question marks!
    I have another post in Heterogeneous Connectivity forum
    Re: Oracle to Mysql character set conversion problem!!! PLZ HELP
    Kindly update your comments there,
    @@@@@@@@@@@@@@2
    Appreciate your help,
    regards
    Edited by: user10243788 on Apr 21, 2010 3:25 AM

    It is OK to post a globalization-related question in this forum in addition to the forum pertaining to the main technology. Not all experts follow all possible forums on OTN. Of course, you should cross-link the posts to let people merge the answers.
    Regarding the problem itself, make sure that SQL*Plus has the right NLS_LANG setting in the environment. On Windows, in the Command Prompt:
    C:\> set NLS_LANG=.WE8PC850
    C:\> sqlplus ...On Unix:
    $ setenv NLS_LANG .WE8ISO8859P1   (or NLS_LANG=.WE8ISO8859P1; export NLS_LANG)
    $ sqlplus ...-- Sergiusz

  • An odd set of problems - full re-install fail

    Hello helpful computer people
    I have a funny set of problems which has culminated in me wanting to fully reinstall operating software. I will explain why I want to do this in a minute, but the main problem is that I can't manage to do it! When I boot up my mac from the startup disk I get a messed up display. The information is obviously all there on the screen, but it's displayed in weird jagged lines. This means that I can't make out where to click to continue with the installation. I also though that the disk drive was being particularly clunky sounding, but could be imagining that.
    You can see what I mean here: http://www.flickr.com/photos/33449131@N02/7160853520/in/photostream
    The problems up to this point have been really odd, with applications one by one stopping responding and finder crashing. Also the computer will sometimes not go to sleep when closed and the fan will go a bit mad. I have had particular problems with browsers crashing and generally the computer grinding to a halt with nothing but the off button having any effect.
    I have tried loads of stff - reseting P ram, repairing disks, running cleanups on Onyx, removing programmes etc.
    I want to go back to square one because things are getting a bit messy, it won't let me reinstall Safari becuase it thinks it's already there, but It doesn't show up on search!
    I tried reinstalling Snow Leopard but realised that didn't really do much and am now going down the route of putting the original install disk in. I bought there computer second hand btw, so there is a possibility that the install disks are wrong, although unlikely because the guy was trustworthy.
    Thanks in advance for all your help
    Tim

    Yep.
    Just want to clear up the fact that the original problems encountered were not display related and it only happens when I try to do that one specific task. The computer is working ok now and I am writing this message from it.
    My display spec:
    NVIDIA GeForce 8600M GT:
      Chipset Model:    GeForce 8600M GT   
      Type:    GPU
      Bus:    PCIe
      PCIe Lane Width:    x16
      VRAM (Total):    128 MB
      Vendor:    NVIDIA (0x10de)
      Device ID:    0x0407
      Revision ID:    0x00a1
      ROM Revision:    3175
      Displays:
    Color LCD:
      Resolution:    1440 x 900
      Pixel Depth:    32-Bit Color (ARGB8888)
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Built-In:    Yes
    Display Connector:
      Status:    No Display Connected

  • Brand new IPad 3 out of the box - set up problem with Apple ID

    Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

    Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

  • My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • How Can I Clean Memory, Cache...An​d Boost Memory On Playbook (like clean & boost memory on Blackberry phone)?

    Dear bros, I have a question which I concern about: How Can I Clean Memory, Cache...And Boost Memory On Playbook (like clean & boost memory on Blackberry phone)? I want to to this because I want my playbook run smoothly.
    Thanks all.

    The PlayBook manages memory through the OS, there's no 'memory cleaner' like on the BlackBerry phones.
    In the browser, there are settings to clear cache, cookies and history which do improve the browser performance.
    You may want to try and change the PlayBook multitasking mode. Go into Settings - General and change 'Application Behaviour'. Showcase is full multitasking (slower), Paused pauses all programs when minimised and makes the PlayBook save battery and run a little faster.
    Hope that helps.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!

Maybe you are looking for