Playbook - Viewing videos in yout ube

I have just purchased a playbook and note that when i go in you tube and try and watch some music videos they wont play and i get an error message. I can watch other videos e.g videos people have shot with video cameras etc but not specific music videos (I was trying to view a casting crowns music video). Can anyone help or advise why this should be the case?
Cheers

I just clicked onto YouTube Casting Clowns. No problems viewing several of their musical videos. Try doing a three button reset of your PlayBook. Hold down the Power Button and both volume buttons at the same time for 15 seconds and then wait 1 minute then hold the power button only until the red light flashes then release it and wait for the PB to reboot.

Similar Messages

  • Can't View Video or Picture when Playbook is bridged!

    I have a Tour 9630 running v5.0.0.1030.  When I try and view videos or pictures from the bridge file menu the program starts on the Playbook. But I am unable to see the pictures or videos off my phone.  Is there some trick that I missing.
    Solved!
    Go to Solution.

    Thank you for the info! I will give support a try.

  • Internet access problems and viewing video on internet

    I have very limited interet access most of the time.  I get a message: "You are not currently in an area that can handle data communication.  ..."  I have no problem with email and other features of the phone during this time.  The signal at the top of my phone says "GSM".  When I am able access the internet, it give me a different signal (can't remember what that is, however).  Even then, I cannot view most video clips, such as YouTube clips.  They will not load all the way.  It states, "Error has occurred in attempting to play media."  Help!

    I have unlimited internet access, so that's not the problem.  Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage.  I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home.  I've also been able to view a video clip, not successfully all the way through, however.  During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot.  This has also happened when the phone has not even been being used.   Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did.  Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips? 

  • Can't view video in iPhoto

    Can't view video in iPhoto on my iMac but I can view it on my iPad! Source of video iPhone, sent to me via email. Appears in iPhoto on my iMac as a blank folder. Using OSX 10.9.5 Maverick. Any ideas? I have the same problem with a voice recording sent to me in the same way.

    That's a whole new ball game.  Go the System/iCloud preference pane and uncheck the Photos check box.
    In iPhoto go to its iCloud preference pane and uncheck all checkboxes.
    Reboot, and go back to each preference pane and recheck those boxes.  That should jumpstart the Shared Photo Streams.

  • Can not view video over the Internet on WVC80N

    I set up the web cam, set up the port forward etc so now I am able to:
       1. view/change web cam settings inside my home network.
       2. view video inside my home network.
       3. view/change web cam settings over the Internet.
    But I am not able to view video over Internet. Every time I did so (using IE browser), after clicking the view video button, I got an error : There are too many user connections or the device is busy, please try again latter.
    Anyone has a fix on this? I set up port forwarding on port 1024 (that's how I can chage settings over Internet).
    I spent 2 hours on the phone with Linksys tech support but they could not find the reason.
    Thanks,
    Sam

    Who is your ISP? How you are trying to access your Camera from the remote location? Along with Port 1024 you need to do port forwarding for port 80 on your router for the Cameras IP address. As WVC80N works on your HTTP Port.
    To access your camera from the Remote location, you need to use http://wan ip:80.

  • Can not view videos on you tube in firefox4 using flash player11

    I'm using firefox 4 and i can not view videos on you tube.I've updated and reinstalled adobe flash player twice with no results.I've also tried the other checks,security blocking,cache,pop ups etc Works fine on IE. Hope someone has a solution.I've always liked firefox but not the newer versions and many of the changes;

    I can't believe you're still running Firefox 4. Why not a newer version?
    There are a number of active threads concerning the latest Flash player plugin (11.3) and the latest Firefox (12-13). Not all users are experiencing the same issues, but things to check include the following:
    - Conflict with Realplayer Browser Record plugin (to disable this, open Add-ons from the orange Firefox button or the classic Tools menu and look under the Extensions and Plugins categories)
    - Conflict with Flash 11.3 Protected Mode (see [http://forums.adobe.com/thread/1018071?tstart=0 Adobe Forums: How do I disable Flash Player's protected mode for Firefox?])
    Scanning down the front of the forums probably will yield additional suggestions: https://support.mozilla.org/en-US/questions
    Does any of that appear promising?

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • For the past week, I am unable to view videos. The page comes up with this comment: "Blocked plug-in" and it suggests that I download the latest version of Flash player. I have downloaded that and still get the same comment. Please help.

    I have an iMac11.2 and am running Mac OS 10.6.8. I have not had a problem viewing videos until the past week or so. Now I cannot view videos on my news, facebook or in email messages at all. A message pops up in the window that says "Blocked plug-in". I have downloaded the latest version of Flash Player for which it asks and still no luck. Can anyone here help me with this? Thank you. Grace

    TThere have been 3 updates to flash player ink the past month.
    download and install the latest.
    this warning seems to be a part of the newer security updates.

  • HT2506 After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer

    After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks

    Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
    1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
    /Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    2. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    3. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    4. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

  • View videos with iPad

    view videos with iPad   change default systems to use diff flash drive?

    Not entirely sure what you mean, but if it's that you want to download and install flash then you can't - it is not supported on the iPad (http://www.apple.com/hotnews/thoughts-on-flash/). Browser apps such as Skyfire claim to support flash bu their reviews are mixed. Also some websites, especially news sites, have their own apps in the App Store, so you could check to see if any of your favoutrite sites have apps.

  • Can I view videos taken on my Ipod Touch on Apple TV?

    I've recently purchased my Ipod Touch 4th generation and Apple TV 2nd generation - I don't seem to be able to view videos taken on my Ipod on Apple TV. Would appreciate any feedback.
    Thank you
    Danielle

    You will have to import the video into your iTunes library and convert it to an AppleTV version. You can find this option in the Advanced menu in iTunes ->create iPad or AppleTV version

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Cannot view video get error message and only sound.

    cannot view video, get error message and sound only. Message  Error Code:c000005, address:2568b7ab

    I am just finally posting a reply. Looks as though the sound card went out. I was told that I could purchase a new open and install myself. I did not do that, but rather my step-dad just decided it was time to buy a new Mac Mini.

  • I can no longer view videos on a web browser

    I can no longer view videos on a browser web page.  Ive installed the latest flash player and have quicktime. 

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button.
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
    3. Safari > Preferences > Privacy
        Press the button “ Remove All Website Data”.

Maybe you are looking for

  • Converting from a BASE64 BLOB

    I have a BLOB column which contains BASE64 encoded jpegs. I want to decode these from BASE64 such that I can get the original JPEG. I've written a function to do this (based on an example found here but modified slightly since my source is a BLOB not

  • Installing Adobe Photoshop - disk full when it isn't?

    Here it is, I am running windows 7 ultimate from a 40gb ssd card (which is almost full) however I save all of my programs, files, pictures etc. onto my secondary 3TB drive which is almost empty. Trying to install adobe photoshop elements 12 - says th

  • Memory errors after Array is created SATA drive

    Hello, I am trying to setup a 655 Max board with a SATA drive.  Once I define an array, I get Memory errors. I am testing this using the Microsoft memory dest boot CD.  As soon as I delete the array from the drive, the memory test is able to work suc

  • RFC Errors  in GUIXT

    Hi , How solve the RFC Errors , I am working on GUIXT ,during script deployment in SAP Web Repository ,  I am getting below RFC errors , have no idea about this error. Please give me  directions to sort this out.  Apologies If I am posting this in wr

  • Do not set check on credit limit and risk exposure when creating returns

    Currently, the system checks on credit limit regardless whether it is a sales order or a return. Now, my User want the system NOT to check if it is a sales return. Where can I turned off this checks? Please advice Thanks