Playbook won't charge with 3rd party adapter

I have a new Playbook plugged in to a Lenovo slim adapter with a micro-USB tip.  I use this same adapter to charge my Blackberry (it has dual charging capability so I can plug my laptop in at the same time).
The issue is that although the Playbook shows it is plugged in (lightning bolt across the battery icon), the charge doesn't increase, and actually seems to go down ever so slightly.
I always thought that USB was USB (i.e. 5V), but that appears not to be the case.  Any thoughts?

You need to use the charger that came in the box with the playbook, it is rated at 5v 1800mA. If you use another adapter, even though it is microUSB, it wont have enough capacity (current wise) to charge a playbook and a laptop at the same time, it wont even be able to keep the charge, because is splitting the current with two loads.  Voltage and Current are two different things. Same voltage doesn't mean it can charge many devices at the same time, unless the rated Current of the charger is enough for the loads, i.e. three devices rated at 5v 300mA can be charge with an adapter rated at a max Current of 1500mA, 5v, because is overdesigned for the loads.
In a playbook in particular, the more current the adpater has (with a constant 5v) the faster the battery gets charged.

Similar Messages

  • Will not charge with 3rd party chargers when asleep

    My iphone 3g does not charge when plugged into a 3rd party charger and the phone is asleep. I can confirm that its not charging because the phone is still out of battery even after being plugged in overnight, and the griffin charger has a LED indicator that shows if its actively charging or not. I tired this with both a Griffin iphone charger and a Belkin charger.
    When waking up the phone though, it of course shows that its charging. It took me a while to figure out that it wasnt chargin when it was asleep.
    Does this happen to anyone else?

    Do these chargers say that they are made to work with iphone?
    The iphone 3g does not charge via firewire pins as the original did. This could be your problem.
    There are many posts on charging issues due to firewire compatibility. You can do a forum search to find out more.

  • Ipod not recognised by computer & won't charge (with computer or adapter)

    Hi,
    When I try to charge my 30G ipod video with my apple adapter, it does absolutely nothing. When I hook it up to my computer, it won't turn up in 'my computer' or itunes and i get the message that the USB-device can't be recognised. On another computer i get the message that I've caused an electricity overdose (sorry for my bad translation from dutch) on the USB input. Other ipods can be recognides by my computer. I've installed the latest version of itunes.
    I've been to the apple store and when they try to charge it there with their adapter it does charges, so i thought my adapter was broken, but it does charge any other ipod. With my dad's (not apple) adapter i can't charge my ipod as well.
    I hope someone knows a solution to this problem. I've already tried resetting and putting it in disk mode, but nothing works.

    Hi,
    When I try to charge my 30G ipod video with my apple adapter, it does absolutely nothing. When I hook it up to my computer, it won't turn up in 'my computer' or itunes and i get the message that the USB-device can't be recognised. On another computer i get the message that I've caused an electricity overdose (sorry for my bad translation from dutch) on the USB input. Other ipods can be recognides by my computer. I've installed the latest version of itunes.
    I've been to the apple store and when they try to charge it there with their adapter it does charges, so i thought my adapter was broken, but it does charge any other ipod. With my dad's (not apple) adapter i can't charge my ipod as well.
    I hope someone knows a solution to this problem. I've already tried resetting and putting it in disk mode, but nothing works.

  • Ipod won't charge with mac or adapter

    only two days ago i was able to sync my 5th generation 30GB ipod with my macbook without any problems. the next time i tried to connect it to my laptop, nothing happened. the usb cable wasn't recognized and my ipod did nothing (even the "do not disconnect" screen didn't show up). so i tried connecting my ipod to my power adapter. again, no response whatsoever. the thing is, my ipod works perfectly otherwise: it still plays music, videos and functions normally except for the fact that i can neither charge nor update it. i tried reseting it multiple times and still no change. now my battery is running really low b/c i can't charge it
    any suggestions as to what i should do? i really don't want to have to order a new ipod

    Did you check the docking port and connector for any kind of debris or lint?
    Can you use another USB cable?
    Did you try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again?

  • S-Video/Composite Video via VGA with 3rd Party Adapter

    As mentioned elsewhere in these discussions, the Mini-DisplayPort on the Aluminum MacBook is different from the eartlier models. The Mini-DP adapters from Apple don't support S-Video or Composite Video, even in combination.
    I ordered and just received my Grandtec PC to Video EZ adapter. It is a bit klugey, requiring a USB connect for power but it supports Apple Mini-DP to VGA output and generates both S-Video and Composite (yellow plug) video.
    The good news is that it WORKS. A bit pricey - Apple VGA adapter was $29 and the PC to Video from Dobbs Electric was $39.99 + shipping. But, the alternative was unacceptable. It may not be HD but at least I can do my job in a variety of sites where most of the video devices are older.

    Dear Popster41,
    I found myself in the same situation you were when you posted this. Could you tell me where you found the converter you mentioned?
    I appreciate your help,
    Erwin

  • Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???

    Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???  I have verified the cable, I can play video with sound from iPod Nano 4th gen.

    composite don't support mirror so it will only display on the tv when the app being used support tvout option
    the build in video app does so it should display on the tv at least my composite cable does with my iphone4
    the audio always works it's pretty much works like a headset

  • IPod Photo won't charge with Power Adapter but charges through Computer....

    Hi got this problem... searched the discussion board but didn't find any satisfying answers.
    Hope somebody can help me out here.
    Problem description:
    My iPod photo won't charge using the power adapter from Apple. Bought a second one won't work, used different cables won't work either.
    however it does charge via the USB port of the computer.
    And it also charges via the car stereo plug (forgot the real name but it's from the apple store).
    So does anybody have a similar problem? Could it be the iPod that is defective and also destroyes the Power Adapter maybe?
    didn't try a different iPod to charge yet. So that's one thing left to try for verification.
    untill then maybe somebody knows help, and it might be just a little setting thing.
    Thanks for the Help

    hi Rene!
    hmmmm. it sounds like you've already tried most of the things listed on these documents:
    iPod's battery doesn't charge
    iPod: Troubleshooting the Apple iPod AC Adapter
    iPod: About the Apple iPod Power Adapter
    from what you're reporting, i'm currently most suspicious of the electrical outlets you're using with those adapters. if you try switching it to a different outlet, does it charge properly then?
    love, b

  • IPod touch 3rd gen won't charge with apple cable

    This problem with my iPod is that it just won't charge with the Apple cable to my mac. When I plug it into the wal charger from Apple it does charge, but on the USB is keeps saying that charging isn't supported with this accessory.
    Please help, since I'll have to charge my iPod with the USB for the coming 5 months!
    Misterb92

    I know this may sound stupid, but it was the same problem I had and wanted to tell you just in case you have a case on your ipod.
    I had a soft gel case on my ipod touch and it prevented the cables from going in all the way.  It would work from time to time and in the computer USB and wall charger it would work once then not for a few weeks.  I just make sure my cover is not in the way of any of the cords and I have never had that problem again. 
    mine is the 3rd Gen touch too.

  • I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem

    I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
    Any ideas I'm pulling my hair out !!!

    Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
    iPhone - Contact Support - Apple Support

  • Playbook won't charge

    Bought a refurbished playbook. The playbook won't charge! the mini usb cable dosn't go in the port of the PB all the way. I have tried using a differnt cable - and it dosn't work. the cable is ok as it is charging my cellphone right now. Can you help my? Is ther a hardeware problem? What to do?

    Did you purchase the playbook with some type of warranty?   Normally refurbs come with a 30-90 day.  
    Did it power up and work fine when you received it?  I ask because if it did I would assume that whomever you purchased it from utilized what's referee to as a "rapid travel charger" on Amazon (as well refered as a charging pod, extra at places like Walmart...ect...just Google "Magnetic Charged for Playbook").
    It quite honestly sounds like a common issue Playbook has in that the connection inside the playbook for the chargef has broken.  As well, housing cannot utilize the USB port connecting it to your computer to charge as the connection is not strong enough to charge the playbook via the computer.  
    You are left with one option (besides sending it back from where it came, which I highly recommend because it obviously WAS NOT refurbished like you were told) that option is to purchase the Rapid Travel Charger - Amazon is way cheaper for this item.
    My first Playbook was a Playbook 16gb.  First the connection went out like yours.  Rapid chger fixed that issue, then the whole unit went dark.  All this after approx 15mths (remember, mine was new).
    I just purchased a new Playbook 64gb.  The whole unit seems better made.
    The issues you and I had were normalwith the older units.

  • IPad Air won't charge with ipad made adapters but only with iPhone's

    My ipad air won't charge with any ipad made adapters! but will charge with my iPhone adapter. Oh and I bought my charger and adapter for my iPhone (that I now use for my iPad Air) at a store that doesn't relate to the officials apple store for only 12 dollars sadly when I charge my iPad Air
    TTo let you know, my ipad adapter would always get hot so is it a problem with my ipad or adapter

    my ipad adapter would always get hot so is it a problem with my ipad or adapter
    Since your iPad charges with the phone adapter, the iPad adapter (that is made by who knows) is the problem. You tried to save a few dollars and it did not work. Get a real Apple adapter and your problems will go away.

  • My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

    My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

    Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.

  • 3rd Party adapter on different JVM

    Dear Experts,
    We want to buy a 3rd party adapter for SFTP as that is not supported in standard SAP PI, we are on SAP PI7.0. Can we install the 3rd party adapter on a separate JVM and use it in ID?
    The adapters we are considering are Advantco & Aedaptive.

    Hi Uday,
    We have used Advantco SFTP adapter without any issues. We have deployed it in PI and it work fine.
    Thanks,
    Siva Kumar

  • IPayment with 3rd Party payment system

    Hi All,
    I have to configure iPayment with the third party payment system. the 3rd party talks with the Paymentech for credit card processing.
    Here in this case,
    1. 3rd party server is providing web services to talk with them
    2. 3rd party server is working fine with the Paymentech
    Issues
    1. As per my understanding, I have to use Gateway model overhere. Correct me if I am worng?
    2. Do I need to create any configuration servlet to talk with 3rd party server or is there any other way?
    3. At which point I should call the web services provided by 3rd party?
    4. How to create request as per the web service requirements and how to solve the response provided by web services?
    Thanks in advance

    Hi,
    If your third party system talks with Payment Tech, Is it possible for you to confiure payment Tech directly with iPayment. As you know that oracle provides all the necessary confguration and servelt. Its pretty striagt forward and simple.
    Find out whether you can use payment tech directly, that should solve most of your issues. If you need more information, let me know
    Thanks,
    RK
    925 998 1494
    Independent Techno Func Consultant

  • HT204368 Can you (Handoff) control your iphone with 3rd party devices ? (Like making calls, sending message, etc...)

    I am wondering if you can control your iphone or other iOS devices with 3rd party devices? I have in mind like making calls, sending sms, etc....
    Thank you!

    No,

Maybe you are looking for

  • HT204350 Why does the"Looking for source..." message go on FOREVER? The macbook doesn't seem to recognize my hard drive!

    I'm migrating a new 15" Macbook Pro  with retina display - using Time Machine. I've started Migration Assistant on the new mac and selected to transfer info from Time Machine. After I click continue, I get a "Looking for source..." message that goes

  • Oracle Reports integration with Sybase

    Hi, 1) Does Oracle Reports support access to Sybase Database? 2) Is it posible to generate Adhoc reports through Oracle Reports Writer? 3) Is ii possible to execute stored procedures in database from Oracle Rreports? Thanks in advance!

  • 10.1.3.1 ADF Faces vs Flex2

    Hi All, Anyone with experience using both care to comment? I did not use JDev since the begining of this year as at that point the quality wasn't yet very high. Using Flex2 for a couple of months now it's getting really productive .. Also, any apps /

  • How to start grounding for the architecture role?

     Hi , I would like to change to an architect role from developer. I am having 5 year of experience in developing the application using MS Technology.  So need information on the same. Regards, Amit

  • Adobe Spool request

    Hi Experts, when iam trying to generate the spool request for Adobe form, iam getting two spool requests 1.PDF document and 2. ABAP list.... i want to knw why 2 spool requests are generated and if so how to avoid ABAP list from spool.. Thanks in adva