Playbook wont power up after software update

recently updated the os and the playbook has died had full battery and was pluged into desktop software any solutions 
Solved!
Go to Solution.

aandras wrote:
Try holding the power + and - buttons at the same time for 15 to 20 seconds. If if that doesn't work try a search of the forums for stack charging.
What do you stack the Playbook on to charge it
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Similar Messages

  • HT201412 Phone wont power on after software update

    I was in process of updating my old 3gs phone.  It stopped in the middle of the download on the phone and now it wont power on at all.  It just shows the middle download bar go up about 1/4 of the way and thats it.  When i connect it to itunes it freezes the entire computer.  help?

    http://www.apple.com/support/iphone/assistant/restore/
    I went there, and its not helpful, sorry for the link.
    Perform a DFU Restore on teh device.
    Google search it, as I can not list ot here how to do.

  • Macbook wont turn on After software update

    PPlease help!
    my macbook air 11 wont turn on After software update. The screen completely black . Power button is not responding éven if it is fully charged.
    THank you
    NOra

    Have t you tried a SMC reset?
    http://support.apple.com/kb/HT3964
    It may be helpful if you indicated the EXACT MBA model you have and the OSX.
    Ciao.

  • HT4623 phone wont turn on after software update

    iphone wont turn on after software update

    Same issue so I connected to itunes. Itunes said phone is in recovery mode. I completed recovery process. Itunes then said phone could not be recovered and my screen is stuck on connect to itunes?!?!?!

  • Playbook won't power up after software update

    i downloaded the OS software update and clicked restart when installed. Since then the playbook won't work at all and can't switch on even though the screen feels warm as if it's working but not displaying. Anyone else had this problem?

    LEAVE it connected to the wall outlet charger (not the USB > PC charger).
    Leave it connected for 24 hours... every 3-5 hours, press and hold the power button only for about 20 seconds. Eventually it will boot on up, but first must reach a certain charge level.
    You will see the blinking red and perhaps yellowish LED light, and perhaps a symbol on screen of "no battery". That means the battery is drained, but it must reach a certain charge before powering on.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My phone wont turn on after software update?

    i jus recently updated my nokia 5530 xm to the new software update and after updatin my phone just wont turn on. when i try to turn it on it just vibrates and then turns off again???

    check this link :
    /t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/m-p/398147/highlight/true#M112
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Safari wont load pages after software update

    i've just updated my safari to 5.1.7 and now after the update it just wont load pages
    i tried to install an older virsion and the same thing happens
    also ive tried to fully remove the software and reinstall it.

    HI,
    Check for third party unsupported Safari add-ons, instructions here.
    http://support.apple.com/kb/TS3230?viewlocale=en_US
    quick moment i'll loose my network connection
    If you are using SpeedDowload, that could be a factor.
    Check download and upload speeds here.
    http://www.speedtest.net/
    Carolyn

  • Macbook will not power up after software updates

    I got my White macbook last week.
    This afternoon, I ran a software update which had 6 items including iTunes 8 and OS X updates to 10.5.5.
    I left the software update running and upon my return, the Macbook had powered off and I could not power it up again.
    Tried everything in the manual and finally called my reseller for an appointment.
    I am very surprised that this happened.
    Can anyone provide a similar experience or tell me what may have happened?
    Thank you.
    RJ

    iTunes 8 has been known to be killing hard drives on macbooks, so i think that the problem is that your hard drive is toasted/dead. Since its only a week old apple could probably replace it for free for you, but theres a big chance all your data is lost. Also try removing the battery and putting it back in, then start it up. If it starts up but all you see is a folder w/ a question mark it means its corrupt. I would take it to the reseller or an apple genius to check it out (at the apple store)

  • N93i wont turn on after software update

    I bought my n93i from lebanon and i live in canada, during the software update my phone turned off and wouldnt turn on again except for the main LCD screen that only displays nokia...ive tried reflashing the phone but it wont respond to the reflash, i cant send the phone to a nokia care center in canada or in the states what should i do

    hi dfar,
    try this please
    1) Remove the battery, and then wait for about 20 min or so before putting it back
    2) Press and hold these three keys together -Green dial key, Star key[*], Three key [3]
    3) switch ON the phone.
    4) Do not let go the three keys until you see the WELCOME screen displayed and just let it complete the boot process

  • EMac wont power up after DVD update

    I updated my dads combo drive to a superdrive today in his emac, something i do all the time with other computers no problem. Once the drive was installed i put it all back together and powerd it up, thing is, it wont, when i plug the kettle lead in i can hear something inside but nothing more. i have rememberd to re plug the switch plug back in too. Can anyone offer advice on to what might have happend hear? i occured to me that the removal of dust from the system might have done something as there was an obscene amount in there.

    Does the front power LED light up? Does the fan come on? Removing dust from a power-down eMac shouldn't cause probelms. Tedious through it may be, you're first recourse would be to take the eMac apart again and double-check that all the connectors are, in fact, fully seated. Especially check that the pins in the power button connector aren't bent.

  • Q10 wont turn on after software update

    Q19 showed me that there is Sotware update, I did update i and when it was done an message appear to restart. But it won't restart... I have the bb pink led!! I tried to restart several time, removed battery... But get the same result .. The same pink square   Please advice.

    Ok, this is no big deal, the phone may have gotten disconnected from the update server, download blackberry desktop software and re install the update from your comptuer, try to aviod doing wireless updates, they screw up to much. let me know if this helps.
    1. If a post has helped you, show your appreciation by clicking Like at the bottom of the message box.
    2. If a post has solved your question, please click ''accept as solution'' to verify your question has been solved.

  • My computer couldn't find my playbook anymore after software update!!!

    After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
    First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
    I tried connect to the other PC either in my office and home several times, exactly same happen again.
    Anybody got same problem that I have? Please advice me.
    My computers have Window7, 32bit.

    Please review the knowledge base articles here:
    Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT204204 my apple ipad wont turn on after i updating software

    sir,my apple ipad (16gb) wont turn on after i updating software correctly.so still this off position and cant any work.please help me

    You took a backup on your computer's iTunes prior to starting the backup, or you have a recent backup ? And you have all of the apps that you had on the iPad in the Apps part of your computer's iTunes library - none of your iTunes downloads are included in a backup (that contains apps settings and contents), the restore will look to pick them up from your iTunes library.
    To restore select the iPad on your computer's iTunes and either do File > Devices > Restore From Backup
    Or on its Summary tab in iTunes click the 'Restore Backup' button

  • My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    Hello ole-gunnar,
    Thanks for using Apple Support Communities.
    If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
    If you see a black screen
    You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on. 
    You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Alex H.

  • Problem in curve 9320 after software update

    Hi, i had updated my curve 9320 with new software as recommended by blackberry desktop software. After the update i am facing many issues after software update:
    1. whenever I am trying to make a call or opening any message my phone power suddenly goes OFF and not starting till I pullback the battery and re-inserted.
    2. Some time automatically its battery got heated up and there is discharge of battery, but when i pull back and re-inserted battery it becomes normal.
    3. Email setup is not working, I am not able to add any email account. whenever I am clicking on email setup there is no reaction.
    please suggest what to do. I tried to go back to download old software but I am not able to get it anywhere online.
    regards
    iftekhar

    Hey iftekhar,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest backing up doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for