Playdock z500 and 30gb ZVM with silicone skin

I'm looking at purchasing the Playdock z500 for my 30gb ZVM. I always keep the ZVM in a silicone skin. Does anyone know if the ZVM will successfully dock with the Playdock with the skin still on? The dongle works, BTW.
Message Edited by emmorton on 09-10-2007 12:14 PM

unless your skin is super thin if not I don't think you can fit it in easily. may have to use some force to slip it into the slot.

Similar Messages

Add any Video with a Video import and conversion system with choose skin

Would be great to have a drag and drop video system where Muse takes care of the required formats and resolution conversions for HTML5 and redundancy player for old browsers.
The current embedding system has massive downsides because lots of large blue chip companies block most video hosting sites like vimeo and Your Tube.
Also these sorts of embedded players can distract viewers off your page when they finnish with links to other videos.

You might want to try MPEG Streamclip (it's free) to convert the video; it is available here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
I can't comment on your 1.83 GHz/iMovie 09 dilemma except to guess it may work but would be excruciatingly slow (my 2.16 GHz is slow!).

US Playdock Z500 with UK Zen Visio

I really want a Creative Playdock Z500 to use with my Zen Vision M 30GB. However, it seems I missed the boat on the Europe supply, and everywhere I've looked is out of stock. I noticed it's in stock at Amazon.com so am thinking about importing one. Before I do, can anyone confirm that a US Playdock will be compatible with a UK bought Zen?Thanks!Sarah

Hi,
Here's the link.
Cheers.

Is there a silicone skin that works with the Smart Cover??

Got my iPad 2 last week and the only issue I have so far is finding a silicone skin that works in conjunction with the Smart Cover. I need the grip the skin will provide but all those I've seen don't allow for the Smart Cover. Any suggestions? The skin has to be thin so the iPad will fit into its case.
Thanks!

Hi PinkiPad:
Take a look at the ACase cover on Amazon here; http://www.amazon.com/gp/product/B004YHWI7S. I just purchased this cover and am very happy with it. It fits well and provides full protection to the back of the iPad and works well with the Smart Cover. It comes in black and clear. I got the clear. It is more of a frosted cover but you can still see the Apple logo and iPad markings through the cover, and the price was right.
Hope this helps.
David

Can i use my blackberry charger (output 5.0v and 0.5a) with my 30gb ipod?

can i use my blackberry charger (output 5.0v and 0.5a) with my 30gb ipod?

The Blackberry has a charging lead, one end of which fits into the Blacberry, with the other ending in a USB attachment which fits into your pc. Likewise the iPod USB charging cable. Blackberry also provide a charger which fits into a 3 pin power socket, and a connection into which the USB connector of either the Blackberry or iPod cable fits. My question is whether you can safely plug the iPod USB cable into this charger (which has a dc output of 5 volts and 0.5 amps) in order to charge the iPod?

Looking for a side pouch that will accept the Blackberry with a skin on

Hi,
New to the Blackberry world and to the forum. I just picked up a Blackberry Curve 8330 thru Verizon. I really like it and the Verizon horizontal side pouch with the magnet device. Does anyone know of a slightly larger pouch that will allow me to keep a silicone skin on the Blackberry. I know I'll eventually drop it. I'd like to have the magnetic shut off.
Thanks,

Hi and welcome to the forums!
http://www.seidioonline.com/SearchResults.asp?Cat=2211
Try a GOOGLE search and if you can't find what you want, then please ask here.
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Ipod Nano Silicone Skin Case

Recently selling iPod nano silicone skin case in good quality, check my feedback on ebay.
http://stores.ebay.com/Ipod-Nano-Skin-Accessories_W0QQsspagenameZL2QQtZkm
Anything feel free to contact me
Contact:
Email address is: [email protected]
AIM: QuestionOnEbay (most on at night)
Yahoo: [email protected]
MSN: [email protected]

Yes, normally I would stay quiet, but Bing Wu, this is a help section for mac users or window users alike (iPod, iTunes) who have a "code red emergency" or problems with their hard and software problems to come here and seek help, and also to learn from each other. Please do not misuse this Forum as a sale and advertising arena.
Thanks

Zen Touch Silicon Skin To Be Released Shortly! REJOICE!!

I have been in touch with a Customer Service Manager at a firm by the name of Boxwave (www.boxwave.com). This firm currently has silicon skins available for iPods and Zen Micro, so I took a shot and made a phone call. A Zen Touch skin will be released very shortly. The gentleman said to keep an eye on their web site for the release, which should be in the next couple of weeks.

Slats325 wrote:I have been in touch with a Customer Service Manager at a firm by the name of Boxwave (www.boxwave.com). This firm currently has silicon skins available for iPods and Zen Micro, so I took a shot and made a phone call. A Zen Touch skin will be released very shortly. The gentleman said to keep an eye on their web site for the release, which should be in the next couple of weeks.
Nice, great news, and about time. I guess it does pay to request products from the manufacturers.
Thanks for passing on the information.

Creative PlayDock Z500 loud audible speaker hi

I ordered a Creative PlayDock Z500 Portable speaker system from Amazon and the unit has come from Avides Media AG in Germany.
Unfortunately there seems to be a fault with the Z500, because there is a loud audible hiss coming from the speakers.
The hiss is the same despite the Vision M player in the docking station playing music or if there is no player docked.
If you play music and turn up the volume, then the hiss is drowned out by the music which is fine for rocking tunes. But for the more chilled songs with quiet parts the hiss is very noticeable.
The other strange feature about the hiss, is when the you turn the volume up with no music playing (or no player docked) the hissing gets quieter. As you wind the volume down the hissing gets louder, until you reach the minimum volume point then the speakers just go silent. Then just one small rotation clockwise then brings the speaker hiss back again.
I have read plenty of rave reviews about the sound quality of Z500, and I can't believe that this hiss is present on all units.
Has anyone else experienced this problem, and better still successfully had their unit replaced?
I have started the ball rolling by sending an email to Avides to see if they will replace my unit.
Cheers
Si

I have the same problem, please can anyone help?I have bought z500 but can not use my zenv plus in it, and I baught it because it sais I can use this in this docking station. It's not very nice have the player plugged in back.....

Creative PlayDock Z500 loud audible speaker hiss.

I ordered a Creative PlayDock Z500 Portable speaker system from Amazon and the unit has come from Avides Media AG in Germany.
Unfortunately there seems to be a fault with the Z500, because there is a loud audible hiss coming from the speakers.
The hiss is the same despite the Vision M player in the docking station playing music or if there is no player docked.
If you play music and turn up the volume, then the hiss is drowned out by the music which is fine for rocking tunes. But for the more chilled songs with quiet parts the hiss is very noticeable.
The other strange feature about the hiss, is when the you turn the volume up with no music playing (or no player docked) the hissing gets quieter. As you wind the volume down the hissing gets louder, until you reach the minimum volume point then the speakers just go silent. Then just one rotation click clockwise then brings the speaker hiss back again.
I have read plenty of rave reviews about the sound quality of Z500, and I can't believe that this hiss is present on all units.
Has anyone else experienced this problem, and better still successfully had their unit replaced?
I have started the ball rolling by sending an email to Avides to see if they will replace my unit.
Cheers
Si

I am from New Zealand, our output is pretty much a stable constant 230V. Dad is an electronics expert, he disagrees with a lower voltage - lowering the input voltage will only lower the output volume. So in effect this will make the hiss appear to go away, but in reality it's simply lowered to a point where it's nominal or below hearing. The total output volume is also lowered, so you need to turn the speakers up more to hear anything.
It fits with what others have said about repaired systems, that don't go as loud any more. This isn't the fix.
We tried putting some heavy capcitors accross the speakers to act as a sort of high pass filter but that didn't appear to have any effect, which surprised him (if it had worked it would have killed some of the treble range also as a side effect, so again not a perfect solution). So it needs to be something a little more involved - like a decent filter of somesort.
It's probably just a cheap chip on the amplifier. I'm trying to get the company to find a NEW pair from the suppliers that doesn't hiss, then doing an RMA. Otherwise I"m tempted to get a refund, since IMO they're just **bleep** sounding. I've never heard hiss like this before, no matter how cheap the system. My DDTS-100 decoder seems to have a hiss problem also.....

Layer Mask with Adjust Skin Tones?

Is there a way to use a layer mask with the adjust skin tone option in PE4? I like what it did to the skin , but not what it did to the wall in the photo. Thanks.

Hi Jon there are at least three ways.
#1..Make a selection.. then apply the skin tone option. Only the selected area will be active.
#2... Duplicate the layer you want to work on. Apply the skin tone. Then hold the Ctrl key and make a new layer. The new blank layer will be below the layer with the skin tone. Then hold the Alt key and click between the two layers to group them. The skin tone will disappear but you can paint it back with a black brush, or remove with an eraser. Just be sure to have the blank layer active.
#3... Duplicate and apply tone as in #2. Open an adjustment layer, like levels, directly below the skin tone layer. Click ok do not make any adjustments. Then as above hold the Alt key and click between the layers to group them, look for the link symbol. Now you can remove with a black brush or add with a white brush.
Butch

I am a language intructor, can I use Adobe Presenter to work properly on both, English, and Spanish presentations with the same software?

I am a language intructor, can I use Adobe Presenter to work properly on both, English, and Spanish presentations with the same software?

It shouldn't be an issue. Ultimately, Presenter doesn't care what language the content or audio is in, it will deliver it just the same. The only issue I could see causing problems would be the player skin. It has Spanish lables, but they only show on a computer with the OS set to Spanish. If you want the student to view both and English and a Spanish version on the same computer, you may need to have two versions of the language.xml file where you have one that has the desired English lables in the "en" section and one where it has the desired Spanish labels in the "en" section. You would then swap these files in and out of the folder located at,C:\Users\{UserName}\AppData\Local\Adobe\Adobe Presenter\Themes , as you need to publish an English or Spanish presentation.

How to export/Import default prefs and object styles with no project open?

I would like to export my preferences and object styles with no projects open and them import them on my team's machines so that no matter what project we create, we all start from the SAME set of defaults. When I open captivate and check both with no projects open, there is no ability to import/export. I know I could open a project and export, but then importing is an issue.
I'm using CP8 on a Windows 8.1 64 bit machine.
Help?
Thx.
Lori

After a fresh install I start by editing the Preferences globally, that means by using Edit, Preferences before opening any project (like switching to Expert UI, default language, replacing feedback captions by shapes). There is indeed no way to import preferences from a specific file. I will do the same for some object styles (like creating a blank Highlight box for audio objects). You can only export/import from and to a project, same like for all Library assets.
However the Object styles: they are part of the default theme, along with their theme colors, master slides and skin. You cannot edit everything without having a project open. I would recommend to create a custom theme in a project, in which you have all the wanted object styles. Changing the theme colors (you can have a custom theme color palette) will change partially colors of the objects. Once you set that theme as default theme, you'll have all the object styles in the projects that use the default theme.
To transfer Preferences, custom themes to another machine, maybe this article could help you out. It was written for a different purpose, but you'll find the location of a lot of files that you could transfer in this post:
Captivate 8.0.1 Install? Keep your Customisation! - Captivate blog
Lilybiri

Ipod nano silicone skin for £1 at Tescos

ipod nano silicone skin are being sold for just £1 at Tescos, thats far cheaper than any I have seen even on eBay.
Got one today and its the DB's
P4 Windows XP Pro

Hello and Welcome to Apple Discussions
A Top Tip for us all!
Thanks for the contribution.
mrtotes

Text is running together on some pages and not others. i've tried no squint and playing around with text options in tools. I can't strike a good balance.

I can't seem to figure out how to have a full screen experience with larger text and everything is in proportion. Either the right end of lines are chopped off, or lines of text are running into each other and out of boundaries.
== This happened ==
Not sure how often
== I installed FF earlier this evening. I've had FF before and my gripe was the inability to set a certain magnification. I found the no squint add on and it seems very good, but somewhere I'm getting stuck. I've been fiddling with no squint, font options in tools and size and resolution settings for my monitor.

i'm also having major CPU problems w/ FF 29.0.1. when i restart the app it calms down again but after loading tabs it steadily climbs up to 100% after not too long. i have checked out the 2 CPU links/articles above and do all the basic troubleshooting and tips, but with all the FF tools & add-ons isn't there some sort of CPU monitor that has the ability to display which extensions/scripts are hogging the CPU? Activity Monitor on Mac just shows the total used by the app. it's impossible in my case to efficiently disable dozens of add-ons & scripts, restart, and test each one by one b/c it can take several hrs before the CPU starts to spike high again. i have no time for this.
thanks

Playdock z500 and 30gb ZVM with silicone skin

Similar Messages

Maybe you are looking for