Played w/ usb controller, made a bounce, volume/pitch LOWWW

I got around to making some noises with my Alesis USB controller, and I recorded just a bunch of junk I was pressing randomly.
I was using the knobs to adjust parameters with the EFM1 instrument.
I bounced the track both as AAC and MP3, but when I play those files the volume and more specifically the pitch is extremely low, and does not sound like what I played.
I read that this might have to do with the setting of the master volume, but I have it set at 0.0 db, and have not ever touched it.
Why does the pitch/vol come out so low???

Hello all, this is not a problem you can fix this easily with some fiddling.
try this modification, originally intended for Envy with Beats, its still modifable to fit your brand and you should be getting similar effects with loud noise.
http://forum.notebookreview.com/5668647-post3614.html
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

  • I can't here the recording I made with a midi/USB controller.

    I'm have problems with logic pro 9.1.8 sometimes with the midi/usb controller. I just recorded a track with the midi/usb controller which i just heard myself record it but now that I'm done with the recording I cant here any of the USB/midi controller tracks that I just made.  So now I cant here all the tracks playing at once.  I can only hear the files that I dragged in from  itunes.  What am I doing wrong?

    Are the midi regions that you recorded showing up? Also, have you checked if anything is accidentally soloed or muted?

  • I plugged a usb controller into my mac and the vibrate function is not stopping. Do macs not support plug and play?

    I'm still very new to forums so please excuse anything that may have been previously asked. I purchased a USB controller for my mac to play a couple games and the vibrate function on the controller will not stop. I was wondering if there is a way to access the controller setting or if os x supports plug and play controllers? Any help is greatly apprectiated.

    Hello Knowledgelink
    Go through the steps in the article below to restart your iPhone into recovery mode to then restore your iPhone to the latest version of iOS.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • 890FXA-GD65 and possible USB Controller related issue?

    Hi all - Been having a bad time of it with a new system build for a little under a month now.  Have tried to capture my "notes" below, any idea of a root cause?  Is anyone aware of known issues with the board; the board and Windows 7; the board and some other component(s)?
    My issue:  During Windows 7 x64 installation or startup, the system will freeze at the "Starting Windows" screen.
    My system specifications:
    MOTHERBOARD: MSI 890FXA-GD65  (BIOS ver 18)
    CPU: AMD Phenom II X2 555 @ stock speed  (HDZ555WFGMBOX)
    MEMORY: DDR3 1600 2X4GB G.Skill Ripjaws-X [DIMM1 & DIMM2] (F3-12800CL9D-8GBXL)
    VIDEO CARD: XFX Radeon HD 5670 512MB (HD-567X-YNF3)
    HARD DRIVE(s): 2 x Western Digital 500GB 7200 drive (WD5000AAVS)
    POWER SUPPLY: Antec NEO ECO 620C 620W
    Windows 7 x64 (Ultimate edition, retail)
    This problem has existed since I first built the system and is consistently reproducable.
    I am able to avoid the issue by disabling the USB Controller in BIOS prior to initiating the Windows installer.  This will allow me to proceed through Windows installation, but as soon as the USB Controller is enabled once again, the issue recurs.  Having to disable USB support is undesirable.
    I'm now on my second 890FXA-GD65 motherboard, having RMA'ed the first board after a fairly brief exchange with MSI tech support(2 replies, with the eventual suggestion of RMA for a faulty USB controller).  So I went through the RMA process with the online retailer, receiving a new board today.
    The problem is that the RMA replacement behaves in exactly the same manner.  Normally this would suggest to me that the problem may lie with one or more of the other components, but I've not been able to identify issues with any of them.  One obvious suggestion would be to try swapping out components, but my resources are constrained on that front - video card happens to be the only component for which I have a alternate that I can test with, actually.
    As far as troubleshooting investigation, here's what I've done/observed:
    1. Windows installation/startup will succeed if the USB Controller is disabled in BIOS.
    2. The same behavior can be observed with a Windows Vista installation disk as well.
    3. When loading Windows in safe mode, the last driver file loaded was disk.sys
    4. Memtest86+ (v4.2), repeated full passes reveal no issues with the system memory.
    5. While seeming that it would be an unlikely factor, I have swapped out video cards(to an eVGA 8800 GTS 320MB), but observed the same issue still exists.
    6. Running in a single DIMM configuration affected no change.
    7. Have disconnected one or the other of the hard drives with no change.
    8. The BIOS version installed is equivalent to the latest(and only) version posted on the MSI support site.
    So...any ideas on what's left to try?  I've done enough reading online to notice that I'm not the only person to have observed this behavior, but have yet to encounter any explanation of it nor a resolution.
    Any suggestions?

    Trying to catch the points that weren't explicitly spoken to by me in the last attempt:
    @Stu - Regarding testing with zero USB devices connected - this was done as part of troubleshooting and it has no observable effect, so I think that I can rule out a bad USB device being the culprit and I apologize for not making that clear previously.
    @Frederik - I've done a little more legwork on the memory item.  Troubleshooting, for the most part, has been executed with this memory set to run as DDR1333 @ 1.5V as that is what the board auto-defaults to(the kit is rated as DDR1600 @ 1.5V)  It was at the defaulted setting that I ran memtest86+ and no errors were reported.
    I've also just now made an attempt to run this memory as DDR1066 at 1.65V and still there is no change in results.  In my research on this specific kit, I have not run into accounts like mine - in the accounts that I have read regarding a poor experience with the kit, memory has either been been obviously bad, for which failures are reported in diagnostics like memtest. ...or, I suppose that there's also the random guy complaining about his overclock not working or the memory speed defaulting to the wrong value in BIOS. 
    Frankly, I don't want to battle any particular component and I owe no allegiance to this make of memory.  I do want to try to be objective, given that I'm stuck with these modules until I make the decision to RMA.  As such, I had read what info is available out there - prior to purchase, I hadn't noted so many reports of issues with this kit across a considerable sample size of feedback so as to cause me initial concern, or else I would have gone with a different kit/different brand.  Probably will do that anyways, next time, but in the meantime, I'm afraid of this being a distraction.  If both myself and this other person(drgan) had both been using the same memory kit, and thus it was more likely to be the common thread, I'd certainly be more inclined to this line of reasoning.  But since he's using Kingston and in the few other accounts of a system freezing on USB controller enabled status I've noted varied memory kit brands, it doesn't seem to me to be an obvious culprit.  But if not, then what's left to consider?  The other interesting factor to me is that the issue appears to be Windows-centric....but... 

  • Strangest problem ever (USB controller makes G5 go crazy at startup)

    OK, this is the strangest thing I've ever seen.
    I got a new dual core G5 (2.0 ghz), and have been playing with it and setting it up all day.
    At the end of the day I plug in my Playstation 1 dualshock controller via a Radioshack USB adapter. This worked well enough on my G4.
    Upon the next shutdown and power on, the G5 fails to display video. Hard drive grinds away, then the internal fans go on hyperspeed. Nothing else. Gotta force it to turn off.
    I go through a painful process of elimination and narrowed it down to the Playstation USB controller adapter. No controller plugged in, G5 boots like a champ.
    What the?? How is this even possible?
    The controller even works if I plug it in and use it while the G5 is turned on. But if it's plugged in at startup, the G5 goes nuts.
    How utterly strange....

    hi allen
    did you resolve the issue?
    i have the same problem on my new G5, am about to go through similar process of elimination, all devices worked fine yesterday!!! now can only boot up with keyboard and mouse attached...
    any ideas why this happens anyone?

  • On Chip Usb Controller

    :confused2:Hi There Everyone
    I have successfully loaded WIN XP on my newly build computer (msi
    kt4vl).
    I have just two queries please if you wouldn't mind assisting!!
    The on chip usb controller in my bios is set to 6 usb ports.
    In device manager there is a yellow question mark by this and it
    says (universal serial bus (usb) controller).
    I was wondering how to configure this - if I disable it in the bios
    it then goes away from device manager
    but then I assume none of the usb ports will work.
    My last query would be the sound card (creative SoundBlaster
    digital) I have loaded the software
    for it and disabled the onboard sound - but all I get is a lot of
    hissing and very little sound coming out
    of the speakers,to hear anything I have to turn volume to the max
    and it's bad.
    Any help would be greatly received.
    Thankyou
    Giuseppe

    Quote
    Originally posted by GPAPARARO
    Hi Guys
    Just a thought!!
    I have windows xp on my machine and was wondering if i wanted
    to wipe the hard drive clean how i would go about doing that??
    In win98 you obviously go into the startup disk and you can delete
    your partitions as you like - searched on the xp disc but couldn't see
    anything,could it be in disk mngmnt maybe i don't know.
    Please advise if you can.
    Cheers i will try it out of device mngr+letting xp ditect the usb again.
    Thanks Again
    Giuseppe
    put in winxp cd and reboot..you might have to set first boot devise to cdrom

  • Which USB controller keyboard?

    hey all. getting my first USB controller for GB. Need something really really simple and of plug and play variety. have my sights fixed on M Audio 25 key machines as they are readily available in India. Which one to go for? The Keyrig 25 or the Oxygen O8 v2? Or any other? Smaller simpler lighter the better. Also the M Audio tech specs said that the Keyrig 25 is NOT compatible with Intel macs. Is that right?

    thanks for the revert! have a space problem. would ideally need a 25 key machine. any idea on which is better - the Oxygen series, the Keyrig series or the Keystation? Went on the M Audio site to fig out but couldn't really decide. Need someone with actual hands on experience to tell the merits of one over the other.
    thanks again
    D

  • HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) USB controller not working

    I am having problems with my HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) Intially Windows 8 was installed but I got windows 7ultimate for it and now I'm missing the drivers for it.
    I don't know how to fix this problem, I have tried everything. I downloaded an program called DeviceDocter and it downloaded the thing but then an error saying. Your system does not meet the miniumum requirements for this update. Update has been cancelled. (9996). It says AMD USB Controller Driver. It should work on my computer since it's Windows 7 Ultimate x64. Please help me fix my ports. Just my 2 ports on my left side of the computer isn't working. The right side of the computer port is working.

    Thanks for the help, but I found the program to fix it. After searching for hours. I stumbled upon this link and it finally worked and the unknown device was only my headset and the other one I just updated by making it search online for the software. Here is the link for other people to use to fix their usb port problems. - http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCac...

  • I Need USB Controller Drivers For My HP Pavillion g6 2235ca Notebook Running Windows 7 Pro 64bit?

    So it has been at least a couple of months that I've been using my laptop with only ONE working USB port.
    The other two do NOT work. If I go to Computer on the Start menu, and right-click on Computer, then Manage, then i go to Device Manager, there is a yellow exclamation mark next to Universal Serial Bus (USB) Controller.
    When I try to update them, Windows 7 tells me that an update could not be found blah blah blah...
    This problem happened ever since I installed Windows 7 64bit over Windows 8 64bit.
    So, can someone help me find drivers for this USB Controller? Or is this some kind of hardware failure or issue?
    Please help? Anyone...!
    Thank you!
    This question was solved.
    View Solution.

    Hi,
    Try installing the USB 3.0 driver on the following link.
    http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55975.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Iphone 4 won't play via USB in car after ios7 upgrade

    Music will not play via USB or Bluetooth. I own 2013 Toyota Corolla. When I plug via USB my car audio display lets me select folders and music through browse but when I select a song I get an error on the car audio display that says "read manual or contact dealership for information on how to connect". This did not happen prior to ios 7 update on my iPhone 4. Anyone else experiencing this and is there a solution or setting that I am missing?

    Hi I have a 2012 Volvo V50 with premium audio. USB audio via 4S worked fine until the IOS 7 upgrade. Now i keep getting the "this accessory is not supported message"
    I have read through this forum and the only thing apple suggests is "update your car oudio system"
    This is total BS!  Ever heard of backward compatibility? Get this fixed or Android is next for me! Apples resoponse so far shows absolute arrogance.
    I am not the only one and a simple search shows thousands of people having the same issues. Asked my car dealer already and they have loads of people with the same issues. Only devices with issues are Iphones and Ipods since the IOS 7 upgrade. Reset as suggested does not work.

  • HP Pavilion 15-n261nr windows 7 64 bit usb controller driver

    I see to not be able to find the correct driver for the usb controller. The hardware for it is called PCI\VEN_8086&DEV_9C31&SUBSYS_2163103C&REV_0​4 

    Please use HP provided Intel USB 3.0 Host Controller Driver or Intel provided USB 3.0 Driver: Intel® USB 3.0 eXtensible Host Controller Driver for Intel® 8 Series/C220 Chipset Fa....
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HP Pavilion G6 2230SA Windows 7 64 bit \usb \controller driver

    Hi - I'm attempting to install Windows 7 (64Bit) on a HP Pavilion G6 2230SA Notebook which was originally delivered with Windows 8. I appreciate that this is not supported by HP but am simply hoping that someone could help me install the correct drivers which I'm missing? These are:
    PCI Device
    SM Bus Controller
    Universal Serial Bus (USB) Controller
    Any help that anyone can offer would be hugely appreciated!
    This question was solved.
    View Solution.

    Hi:
    You need these drivers...
    SMBus Controller:
    Download, unzip and manually install the smbus controller driver I attached under Attachments below.
    Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
    Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
    USB3:   Install both of these and reboot.
    http://h20566.www2.hp.com/portal/site/hpsc/templat​​e.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&...
    http://h20566.www2.hp.com/portal/site/hpsc/templat​​e.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&...
    PCI Device:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&dlc=en&lc=en...
    Attachments:
    sp66185.zip ‏7 KB

  • Very slow boot due to USB controller?

    Hi all,
    I bought your barebone MS-6251 with combo DVD-RW. (other params are pentium IV 2.8 GHz, 512 MB RAM, 120 GB HDD Seagate, NVIDIA GeForce FX 5200 Ultra). I already installed your LiveUpdate software.
    I was absolutely satisfied with this product untill this monday (or tuesday) when my computer suddenly crashed. From that time I was not able to boot it again up, it froze after login dialog of Windows completely.
    I reinstalled windows again and I was succesful and now I am working on the computer but I have following problems:
    1. I am not able to install in windows FRONT PANEL with card readers?
    2. During start up of Windows, they seems to stop for 1 minute - black screen, HDD not operating, after this long 1 minute start up process continues normally.
    3. I noticed that it is somehow connected with USB controller - when I switch it off in BIOS, everything runs quickly - of course without USB support. Immediately as I switch it on, there is this huge delay during start up.BUT THIS WAS NOT BEFORE - BEFORE CRASH MY WINDOWS STARTED IN 10 SECONDS. If I switch moreover to enable  KEYBOARD SUPPORT (USB) or MOUSE SUPPORT (USB) in bios, the delay is really catastrofic - it takes 1-2 minutes for the initial MEGAPC screen to go away and then another 1-2 minutes starting windows.
    I checked my BIOS version, it was 1.0, so I tried to update to 1.1 but it is the same.
    This is very annoying, I believe that you have some solution for me, otherwise I will have to return computer to my supplier.
    Many thanks for you help and nice day
    Vladimir Buzalka
    Czech Republic

    Hi
    Thanks for the reply. After a lot more googling- it turns out this is a general Oracle problem and is not solely related to use of the GEOMETRY column. It seems that sometimes, the Oracle optimiser makes an arbitrary decision to do bitmap conversion. No amount of hints will get it to change its mind !
    One person reported a similarly negative change after table statistic collection had run.
    Why changing the columns being retrieved should change the execution path, I do not know.
    We have a numeric primary key which is always set to a positive value. When I added "AND primary_key_column > 0" (a pretty pointless clause) the optimiser changed the way it works and we got it working fast again.
    Chris

  • How to export usb controller custom assignment settings to another computer

    Hello everybody 
    is there any way to export Logic 9's USB controller assignments to another computer setup, to work with same controllers bought from a local music store, with even up to 7 usb controllers in one setup? This way, with a preference export file type of method, time would be saved lightyears by just choosing some "import settings file" function and *click*, every pot in those multiple controllers would do the intended function on the other system too.
    Example scenario,
    computer 1)  MacBook + 7 different usb controllers wanted to by exported assignment-wise (2 x Behringer BCF2000 and 3 x BCR2000, Presonus Faderport and Novation Nocturn
    computer 2)  MacBook Pro + 7 different usb controllers wanted to be exported assignment-wise (2 x Behringer BCF2000 and 3 x BCR2000, Presonus Faderport, Novation Nocturn + some other random USB controller in the chain also (wanted to be left outiside any assignment compromises)
    I don't know what information of controller devices Logic saves into different files for recalling purposes, and how accurate device-identifying-wise the assignment files are, but how could I make "computer 2" controllers do the same fader/vpot/button functions as on "computer 1" using those same products over there, and still leave that existing extra eight'd controller on "computer 2" left as it is/was?
    Ps. If there IS a file exportable for instant multi-controller configuring this scale, does the actual physical connecting order into USB hubs (all these devices could even by connected via single USB-hub cable into MacBook?) change the file's workability, I mean if I'd swap a few controllers into each other's places on the USB hub, would that smoke that preference file's workability whole together then?
    THANKS for every reply, Really, REALLY, appreciate it
    - Aleksi Bovellan
    Finland
    www.glideslope.me
    PS. Sorry if this was confusing or "hard to read" in some way, I really tried my best to include every possible information of problem to save the time to resolve it..!

    Hi
    Have you tried copying the Control Surfaces preferences from 1 Mac to the other?
    <User>:Library:Preferences
    com.apple.logic.pro.cs
    Note that the User Library is hidden bt default in Lion/M Lion: use the Finder:Go menu whilst holding down Option to get there
    CCT

  • USB Controller

    I've just bought myself a copy of ezdrummer with the DFH expansion pack but need to get myself a usb controller.
    From your experiances, is drum triggering better with a specific drum trigger device such as M-audio's Trigger Finger (or something similar) or just go for a usb keyboard?
    I know most keyboards are velocity sensitive now but would a synth action/semi weighted action be more velocity sensitive?
    I've borrowed a friends M-audio Oxygen8 keyboard to try out but i'm finding it quite hard to get any subtle hits.
    Any advice is welcome
    Many thanks

    Install the Realtek media card reader driver software
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140783-1&cc=us&dlc=en&lc=en...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for