Playhead jumps to the beginning of the timeline

Hi, since my update it often happens that the playhead jumps to the beginning of the timeline when I'm busy in the middle of mine project. But when I push the spacebar the film starts at the spot were I want to put the playhead. But in the timeline the playhead is going over the beginning of the project. So I can't see what I'm doing and this is very annoying. Every time I have to scroll back to that place. Has someone the same problems and is this a bug or do I do something wrong? Who can help me?

KeesB, a few of us have discovered the same problem and discussed about on this post.  https://discussions.apple.com/message/16257815#16257815

Similar Messages

  • How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?

    How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?

    Grateful pirate wrote:
    Thanks but I think it's more of a setting thing.
    Worked for years in 9 and know my the key commands. Just takes up  lot of extra time. I know there must be a solution just can't find it myself.
    Thanks again.
    Oh, I see…….when I want something like this to happen I would just engage the >Go To Start<  command (0 on the numeric keyboard in my case) and the play head will position at the beginning of a cycle area (if one is active of course)!
    Hope this helps a bit……..

  • Why does the play-head go back to the beginning of a timeline/project by default

    When working in timeline mode, the program (Premier Elements 10) often wants to go back to the very beginnning of the timeline/project when you're working on the tail end of a project, (which of course, is most of the time). I'm not sure what key or function I may be hitting to cause this behavior because it doesn't happen 100% of the time (more like 80%). But it's quite frustrating to continually have to zoom out to view the whole project/timeline, stop the playback (it automatically goes into play mode from the beginning of the timeline), and then zoom back to where you were working at the end of the project.
    I have been through all menus and can't find an option to shut that "feature" off. 
    I'm running Premier Elements 10 on a Windows 7 (64 bit) machine.

    emmettshort35
    What version of Premiere Elements are you using and on what computer operating system is it running?
    The answer to your question as I understand it is printed here already.
    That would be, to get the Timeline Indicator back to the start of the Timeline 00;00;00;00, you would press the Home key.
    All possible interpretations are included in what is already writtten above:
    Computer Home Key takes the Timeline Indicator to the start of the Timeline.
    End Key takes the Timeline Indicator to the end of the Timeline content.
    Clicking on a spot on the gray area immediately above sight of the Timeline tracks commands the Timeline Indicator to that spot.
    The Timeline Indicator can be moved from clip to clip (left to right) Page Down and from clip to clip (right to left) Page Up.
    If you do not want playback of your Timeline content immediately after it is rendered there, go to Edit Menu/Preferences/General and remove the check mark next to "Play work area after rendering previews".
    You can also check Edit Menu/Keyboard Customization/Application to see if there is anything of interest there.
    If I have not targeted your question, please give further details and I will think about this some more to determine if there is something that I am overlooking.
    Thanks.
    ATR

  • When i open a new tab i want the cursor to be at the beginning of the url (it was until this latest update, now the cursor is at the end of the url)

    I have just taken the latest update to 22.0 from the last version.
    In the past when i opened up a new tab the cursor would jump to the beginning of the URL and i could start typing. Now the cursor goes to the back of the URL and i have to double click the URL to type in a new one.
    Let me try to be as clear as i can. I have had firebox set for long time so when i open a new tab google.com comes up, and google is also my home page.
    I have not installed any options for a long time either. And nothing that has to do with tabs.
    What i remember is as i opened a new tab the URL of it would turn blue and i could start typing in a new URL. Now when i open a new tab i see google.com come up in blue, then the url turns to https://www.google.com/ and the blue goes away and the cursor is at the end of the URL. I now have to double click the URL to type.

    I switched to the "about blank" and then use my home icon to get to Google.com
    It is not quit as good as it was but usable.
    I think you should add two new check boxes in options under "tabs"
    1 - When opening any new tab, put the focus of the cursor on the URL.
    2 - When opening any new tab, put the focus of the cursor on the search box.
    This will take care of the majority of people.

  • How can I make the Acrobat Pro MP3 player rewind to the beginning of the sound track.

    The small rewind button on the Acrobat Pro MP3 player does not fully rewind the audio, it only jumps back a small amount each time the rewind button pressed.  Is there a way to make the rewind jump back to the beginning of the sound track? 
    If that is not possible, is there a way to use a different skin for the MP3 player--one that would provide better controls?

    Thanks Dave,
    I thought this was the case, but hoped there was something I was missing. 

  • HT3275 I've 1.85TB empty space on my time Machine, but it only backs up to the beginning of the previous month. it should have weekly back-ups for every month before that. Any ideas why it deletes stuff older than a month?

    I've 1.85TB empty space on my Time Machine, but it only retains back-ups to the beginning of the previous month. I should be able to access weekly back-ups for every month before that until the disk is full. Any ideas why it deletes stuff older than a month?
    Thanks, Rigby.

    If you are using Ethernet to connect your Mac to the Time Capsule, are you allowing at least 2-3 minutes for Time Machine to fully load when you open the application to see your backups?
    If you are using wireless to connect, you may need to allow 8-10 minutes or longer for everything to fully load, depending on the speed of your wireless connection.
    If you see only white time "bars" on the timeline at the right of the screen, you are seeing temporary backups. Permanent backups are displayed with purple "bars".

  • Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

  • Adding a new value at the beginning of the list

    Hi,
    I've a list of values which are hard coded in the 'Elements in List' property for a Combo Box. Now, I want to add a new value at the beginning of the list. It doesn't allow me to add one. I have to delete all values and re-enter from the first which includes the new one. Is there any way that I can add a new value at the beginning of the list without having to remove other values.
    Thanks in advance.
    -- Srinivas

    Hi ,
    In order to implement the appropriate moves you have to use the key combinations : 1) <shift>+<ctrl>+'<' for deletion of the current list item(where the cursor is located)
    2)<shift>+<ctrl>+'>' for appending a blank row in order to add a new element...
    Regards,
    Simon

  • Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  Word was much easier for me

    Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  I found word much easier to use.  Please help. Trying to do a resume.

    On a US keyboard it is Option + 8 (above the letters). •

  • Because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem

    because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem, atualmente when lighting the computer among the processes that are loaded when beginning the computer is a process of name firefox.exe with a load of between 30 and 50000 kb but I don't find to the registered firefox inside the programs to crgar from the beginning when entering for msconfig.exe my operating system is so far windows xp up-to-date sp3 and my firefox is 7.0.1 version in Spanish that is my native language.

    That seems very suspicious. Two suggestions.
    First, try Firefox's Safe Mode. This will let you work around problems with add-ons and perhaps help you identify things to remove so that Firefox goes back to normal.
    I recommend making a backup of your Firefox settings before starting in Safe Mode. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that work? If so, you may need to disable your add-ons and just bring the most essential ones back to life until you discover the problem one.
    Second thought: malware. You could supplement your usual security scans with these:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/
    HouseCall : http://housecall.trendmicro.com/
    Hope this helps.

  • How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

    How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

    marykaymaas wrote:
    How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?
    either Select All and drag to the left (turn on the Lock Automation menuItem if you have any automation curves)
    or
    use the Cycle Region to export the exact length you wish:
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Downloaded songs don't start at the beginning of the song, why?

    the songs i bought from itunes don't start at the beginning of the song,  it's just the preview clip.

    Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

  • Blank page at the beginning of the report

    I have a Report with a Group Above. I wanted a new page when a new Group began, so I selected the Group and changed Page Break Before to yes. It did start a new page with each Group, BUT there is now a blank page at the beginning of the report. How do I get rid of the blank page?
    Thanks, Wayne

    Hi Wayne,
    I don't know whether the solution provided by Jrg works for you or not. But I solved the problem in a different way.
    Insted using a page break on a repeating frame, I placed a boilerplate item in a corner just below the frame with a " "(white space) and I set the boilerplace item's property "Page Break After/Before" to "Yes". You understand me? just cheating ;)
    That worked for me.
    Cheers,
    Gouri Sankar

  • How to create links that guide you to a specific title on the page and not the beginning of the page?

    I'm trying to create links so that when you click on a title in the table of contents it guides you to the title on the specific page. However, when I do that it always sends me to the beginning of the page even if the title is in the bottom. Anyone knows how to do if I want to get to the title and not to the beginning of the page? When I use Finereader it create links from the table of contents automatically and those links send me to the title no mater where it is on the page. I've tried do edit the settings to look like those links created in Finereader but it doesn't work.
    I'm using Adobe Acrobat XI on a Mac Book Air.
    Regards,
    Andreas

    In you first query you can only have 1 column listed in your subselect, used ResourceID.
    http://www.enhansoft.com/

  • The file adapter takes also the mark of the beginning of the file as a char

    Hi guys,
    I need to use the file adapter for sending data into XI.
    My first column of the CSV file contain ID of the objects of length 8 chars. But when the adapter takes also the beginning of the file, the length starts to be 9 chars.
    How is it possible to disallow to take this mark?
    I didn't find any parameter in the file adapter settings, which could solve this problem.
    Thanx for answer! (Points guaranteed )
    Peter

    Hi Peter,
             While configuring sender file adapter, you can do the following.
           1. While defining Parameters for Recordset Structures , you can make use of the recordsetstrucure.beginSeparator function which will take the first string in the file as a begin seperator.
      i guess this would help you.
    regards,
    Aravindh.

Maybe you are looking for

  • Time capsule losing internet connection

    Hey there, I've read other people with similar issues, but haven't found a solid resolution yet. Hoping you awesome Mac folks can help me out. It's slightly confusing, but please let me know what you think. Sorry this is long, just trying to give the

  • Goods Mvt based on SLED

    Hi there,               I got the requirement in which if the SLED is within one month then that batch cannot be used/sent to other countries but it can be used for the plant in the same country... Is there any stardard way that SAP supports...... Re

  • GR and Inbound Delivery

    Hi All, As per my understanding GR process is differentitaed based on 1. Physical Receipts 2. Non-Physical Receipts. 1. Physical Receipts: Identified by Confirmation control key Confirmations in purchase order. Meaning all the receipts which are rece

  • Issue with Adhoc queries

    Hi, Background: 3 additional fields were added to infotype 0023 to capture the position at the previous organization, Years of exp and Months of previous exp. The year and Month of previous exp gets populated automatically if you save the start date

  • How do we create Hyperlink to local file on c:\ in Web Intelligence

    How de we create Hyperlink to local file on c:\ in Web Intelligence. Thanks in advance, K.