Playhead will not stop at the end

When I play my project in FCP the playhead will not stop at the end but will continue for a few seconds. So when I want to share my project I have to make a range so that I don't have a black clip at the end. There's no gap or what so ever on the timeline. How can I solve this? Thanks for your answers.

Unfortunately, the problem is not solved. When I hit the end key the playhead goes to the end. Actually one frame further. Because when I go back one frame, I get the end clip symbol in the corner. But if I just play, the palyhead goes further for a 3 seconds. Then I get the clip symbol "negative edge" on the rightside. See also image. And there is nothing in the timeline.

Similar Messages

Logic X playhead will not start at the beginning of project.

Logic X playhead will not start at the beginning of project. When I push play, it starts from a point from which I was working earlier. When I press play from beginning, it will only play from that other point. I've tried saving the project with the playhead at the beginning, after dragging it there, then closing and re-opening the project but it still starts playback at that undesired point!...even when I push the stop button twice, (go to beginning) it does not go!...Why does this happen?

It is behaving as though there is a marquee at that point but I did not have one... I placed one at a different point and it played from there (normal) but when I turned it off, it went back to my 'problem' point! And, after mousing around with a few marquees and playhead 'drags', it was "fixed"... But I never knew what the problem stemmed from... And...It tends to happen on occasion, in different projects.... I'll continue to monitor these glitch events, and keep you posted!

Songs will not play to the end on only one of my computers

Some of the songs in my library will not play to the end. However, I have come to realize this is only happening on one of my computers. The computer I sync with. The same songs will play on my laptop and iPad. ??? What gives?

Just in case, check to see if "Crossfade songs" has been checked in your Playback preferences in iTunes. Here's a screenshot showing where to find it:
If it is checked, try unchecking it and click OK.

Just downloaded the latest version of itunes now most of my tracks will not play to the end of the song.

Hi just installed latest update to itunes and have just noticed that it will no longer play my tracks all the way to the end mainly stopping around 8 sec from the end has anyone else had this problem have all ready tried deleting libery and re-installing it but still doesnt work. please help
PS All songs play ok though Media Player so not corupted data.
Many Thanks

Just in case, check to see if "Crossfade songs" has been checked in your Playback preferences in iTunes. Here's a screenshot showing where to find it:
If it is checked, try unchecking it and click OK.

Scene selection will not play to the end! help needed

Hi
I am using Encore CS5 and my DVD is a DUAL LAYER
I have created a DVD of a dance show. I have a PLAY ALL button that plays the full show but on the timeline I have created CHAPTER POINTS for each dance.
On a SUB MENU I have created a dance selection menu, the buttons on this menu point to CHAPTER PLAYLISTS that I have created, so for example I have 18 dances and I have created 18 CHAPTER PLAYLISTS with each one having every dance in it. I have applied end actions to every playlist to go back to the previous menu. When I preview the DVD in Encore the dance selection works fine, it plays that dance and goes back to the previous menu.
The problem I have is when I have created the image and watch it with VLC player or I burn it to a DVD some of the dance selections only play about 10 secs and not the full dance and then it will apply the end action and go back to the previous menu. This is extremely frustrating!!!!!!!!
Has any one experienced anything similar or have any idea why this is happening.
Thanks!

CHAPTER PLAYLISTS that I have created, so for example I have 18 dances and I have created 18 CHAPTER PLAYLISTS with each one having every dance in it. I have applied end actions to every playlist to go back to the previous menu.
From the rest of what you said, I assume you mean that each chapter playlist includes ONLY ONE dance in it. If you mean what you said in this sentence, you want only one dance in each chapter playlist.
Make sure that you have no end actions on any chapters. While you are looking at that, make sure that you have no overrides anywhere in the project. It doesn't matter whether you are sure you did not add any. There is the inadvertant click, and I have had Encore add chapter end actions when working with its timeline.
If all is as it should be, burn a test disk, and confirm you see the problem from a DVD player. I find VLC a great test option, but it does not handle slideshows, so I'd test beyond it.

When I turn my iPod Touch on it will not stop displaying the USB cord plugging into iTunes. What could be wrong?

When I turn on my iPod touch it will not do anything except display the image of the USB cord plugging into iTunes. What is the problem?

It is telling you to connect the iPod to your computer and restore via iTunes
iTunes: Backing up, updating, and restoring iOS software

Phone will NOT stop making the email notification sound.

I just restored and upgraded to 2.0.2 and now my phone won't shut up! I'd rather not go through the restore again. Any suggestions?

Apple sanctioned? I think you just need to downgrade iTunes, then re-install what ever version you want. How can it not be Apple sanctioned? They are still Apple software, just your choice.
If you need earlier versions for the iPhone try.......
http://iphonefreakz.com/iphone-firmwares/

Spotlight on my iMac running snow leopard will not stop indexing the hard drive. How can I stop this?

Spotlight on my iMac (OSX 10.6.8) has suddenly begun indexing the hard drive non-stop, causing very sluggish operation and spinning beach balls. Reinstalling the operating system has not helped, nor has repairing permissions or the disk.

One of the first things that happens when installing a new version of OS X is that the Spotlight search app is setup to index all available hard drives.
The indexing makes it faster and easier for the Spotlight Search app to find things on and off your Mac.
You can either let it take the time it needs to do this (Spotlight will only do this one time, initially) OR if you just can't or want to wait for this to complete, you need to go into OS X System Prefences panel in the OS X Dock, locate the Spotlight icon.
Click the Spitlight icon and another set of menus appear.
Find the menu item dealing the Spotlight indexing and uncheck its checkbox to disable Spotlight indexing.

My iphone will not stop showing the apple logo and rebooting

How can i get my iphone 5 to stop rebooting and actually show my screen. All it does is show the apple logo and then its goes away and the screen stays on but shows nothing. I can triple click to invert colors but that only makes the black screen white. My lock button does not work either so i cannot hard reset

It appears you have a hardware failure. Certainly the lock button has failed. Without that button you cannot reset which is the first thing to try in cases like yours. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Distiller will not stop distilling postscript file

I use Distiller 6.0.2. Lately, when I try to distill a Quark layout into a pdf the distilling process will not stop. The progress bar shows a number that just keeps on climbing up. It seems if I quit the program and then restart it, this will solve the problem and distiller will make a pdf of the postscript. However, I will get the same problem once I try to distill another page. I tried to trashing the Distiller preferences and then restarting the program. This did not do anything.

It's not a specific file and it doesn't matter how big a file is. I am distilling a postscript file. My Mac is running on 10.3.9. I only print from Quark to get postscript files.

I created a movie in elements 11, now the cti will not stop at end point, how to fix this?

I created a movie and now the CTI will not stop at end point. How to fix this?

Timeline too long (orphans) http://forums.adobe.com/thread/652216?tstart=30

Adobe Encore CS4: End action will not execute because of end action on the final chapter point

Error screen:
Error I’m getting for section titled Notes (PP 45 second video): “End action will not execute because of end action on the final chapter point.”
The icon that shows error is in top line second from end. I’m trying to 'end action' that portion of the video by going back to 'menu default'; also tried end action w/ ‘Stop’ and neither work.
I saw a post about checking timeline. Not sure what I’m looking for there. I have nothing in Orphanage area. I also tried building despite Check Project error and it will not build project. Any suggestions on how to fix: “End action will not execute because of end action on the final chapter point.”?

Select chapter one on that timelne. Look in the properties panel. Does it have an end action? You do not want an end action on the chapter; just on the timeline itself.
That will not generally prevent a build, however. So you may have other issues.

My IPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding." My AirPort utility shows that I am connected. What could be the problem?

My iPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding". I've run the AirPort utility and it shows that I'm connected to my Wi-Fi. The connection works with both my iMac and iPhone. I'm concerned that the problem is with hardware rather than software.

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

HT1212 I have no idea why suddenly my iPhone5 will not move past the Password screen; also, a voice describes each button I touch, and ends with "screen locked" (not "phone locked").

I have no idea why my iPhone5 suddenly will not move past the PW screen; a "voice" identifies each button touched (the Slide button, for example) or the PW buttons, and then ends with "screen locked" (not phone locked).

I believe you have Voice Over on:
You have to tap, then double-tap to select the numbers to enter your passcode.
Then:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

Playhead will not stop at the end

Similar Messages

Maybe you are looking for