Playing 5thGen through USB Port / Xbox 360

My iPod is not recognized by anything other than a PC. I had an older iPod that I could plug into my Xbox 360 or a DVR cable box and I would get a "Do not disconnect" sign, and be able to play through these devices.
When i plug my new 5th gen ipod into either of these, there is no change to the screen. My xbox 360 does not recognize that I have a portable device plugged in. Again, this worked fine with my older ipod.
I have tried putting it into disc mode as well, but this doesn't change anything.
I also have downloaded the optional ipod support software for the xbox 360.
Is there something that I need to do to the ipod to get it to be recognized by a non-PC?
Thanks.

The problem seemed to be with the 360. Had to unplug/replug the power source to the 360. Apparently the problem was with the 360 USB ports.

Similar Messages

  • HT1349 playing music through usb port

    hiw do i play ipod touch through a normal hifi with either usb or phono plugs   when i connect to usb connection im told it is not compatable yet my origonal i pod works fin 

    The problem seemed to be with the 360. Had to unplug/replug the power source to the 360. Apparently the problem was with the 360 USB ports.

  • How do I get iTunes output through USB port ?

    How do I play iTunes through USB Port ?

    Have you updated both Airport Express units to the latest firmware?

  • How can i use labview for communicating with pic18 microcontroller through usb port?

    Hi all,
    I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
    controller which will  make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
    mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

    Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
    Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • While charging through usb port i am getting small shock at the edges of my iphone 5??why is this?

    I am getting small shock when charging my iphone 5 through usb port?why is this??any solutions??

    Bring the phone and USB cable to Apple for evaluation

  • Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Fixed it. It is on Chevrolet's end. Press config to access the configuration settings. Turn menu/tune knob to highlight vehicle settings. Press menu/tune to select the vehicle settings menu. Choose return to factory settings.

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • Playing music to hifi through usb port

    please please help, i apolgize if this is straight forward, but im not too clued up on these things...
    when i plug my ipod into my hifi through a usb port i have no choice over which songs are played, it plays the same 12 songs over and over. I have checked "on the go" listings and none of them correspond with the tracks played on the hifi?
    if any one can assist id be extremely graeful, many thanks

    fotosonix wrote:
    That's what I thought too, then I bought this USB Ethernet adapter and on the package it says :
    "Compatible only with MacBook Air Computers"... so I am not sure if I should open it.
    When it was originally released it only worked with the MacBook Air which came with a special version of OS X that supported this adapter. Apple seem to have since built this support in to versions of OS X 10.6 and later for all Macs.
    If you have an older version of OS X e.g. 10.3 to 10.5 then an unofficially driver is available here http://www.sustworks.com/sb_site/downloads.html
    There are also third-party USB to Ethernet adapters with their own drivers like this one http://www.kanexlive.com/usb3lan

  • IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

    It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

    - Try resetting the car system if you can.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

  • Problem "trying" to play with other people on Xbox 360 Live

    I am using a WRT54G v. 5 router with the latest firmware. I have not been able to play with any player online on any game for around a week now, no matter what I do, but I can download demos, and stuff. I also can't view any players whatsoever via the Players tab in the Xbox 360 guide button thing, so there is definately something wrong with my router. Any suggestions?

    Something also I should mention is that I've called the xbox 4-800 live xbox thing or whatever, and they said it was my router too.
    I've also tried DMZ but it still didn't work out, as for the Port forwarding, I couldn't find anything that would let me give my Xbox 360 an ip address, so I just used the one on my client table.
    Beforethen, I was also using DI-604 router too, but that didn't work out either, even though I was able to assign it to 192.168.1.1, but I read somewhere on here you aren't supposed to do that. I haven't tried it out fully with my WRT54G v 5 though since I can't give my Xbox 360 a static ip address like I could easily in my DI-604 router.
    And anyway, i'm still stuck and unable to play with anybody on Live thanks to my router(WRT54G v. 5), so if can anybody see this and give out suggestions, or see what my problem is?

  • Samsung Fascinate, problems with playing music via USB port on car stereo

    Before the update, I could play the music files on my Fascinate via the USB port on my Kenwood stereo, and control basic functions such as skip, pause etc.  Now, my stereo does not recognize the device, and cannot read the files.  I went to local Verizon store where a sales rep tried to connect it in here new Kia Soul and it didn't recognize the device either. It will play via the AUX jack, but I lose player control and the phone does not charge via the AUX cable.  She did a hard reset which did not resolve the problem.  We tried one of the other employee's Fascinate in my car, which did not work either.
    So, after hoping to be able to stream music via Pandora, Jango etc thru the USB port after the update, now it seems its primary function is for charging.
    Also, the ALL SHARE function, which I used to get the music on my phone originally, does not work now.
    Anyone else have this issue with music player and USB connection?

    txgopher- I have personally never used my Fascinate to listen to music via USB via stereo however, I can see why it would be frustrating for you to no longer be able to do so when it was never an issue prior to the update.
    It sounds as though you and the store rep already did some troubleshooting by trying to duplicate the problem with another car, stereo and even doing the final troubleshooting step which is a master reset.
    Since you have done all of the necessary troubleshooting steps to no avail, it most definitely appears as though the software update has interfered with that USB connection in some way.
    What I have done is forwarded the information you have provided to Samsung in order for them to look into this concern as well as come up with a way to get this resolved.
    Please stay tuned because as soon as we hear back from Samsung we will be sure to update this forum with the results/findings.

  • Issues playing video through USB on 58M9363D 4k TV

    Hi there,
    I recently purchased the 4k 58M9363D and I am loving it so far. However I do have some serious issues with playing video from both USB and through my pc. They do ruin the experience at the moment and hopefully they can be fixed. So here goes!
    Whenever I try to play a mp4 file through USB it says format is not supported, this is especially painful when all 4k content I could find seems to be in the mp4 format.
    Another issue I get is with playing 3D movies from usb.
    Sometimes they play perfectly fine but often I get strange long lines at the bottom of the screen, making is unwatchable.
    It doesn't seem to be a format issue as I tried mostly mkv files that work half the time and the other half I get the same distorted screen.
    Lastly, I can't seem to play 3D movies from my pc.
    When I turn on a SBS video and press the 3d button on the remote I just get a double SBS screen that looks converted from 2D to 3D, instead of them merging into a single actual 3D image.
    Can anyone tell me how to fix these issues?
    Thanks in advance!

    Hi
    Regarding the USB playback:
    In Toshiba M8365 user manual (page 94/95) you can find the details about the supported media format, video codec, file extension, etc
    http://www.toshiba-om.net/LCD/PDF/English/M8365-405058-English.pdf
    The MP4 media format is definitely supported.
    The following video codecs in connection with mp4 file format should be used: H.264 (MPEG-4 AVC) or MPEG-4 part12,14
    Regarding the 3D support (over HDMI):
    Take a look on page 96. There you can find info about the supported 3D resolution, aspect ratio and 3D structure (Side by Side (Half), Side by Side (Full), Top and Bottom)
    The possible 3D structure depends on the movie resolution.

  • Airport Extreme (2009) USB disk & Xbox 360?

    Hi all
    Does anybody know if an Xbox 360 should be able to see the a USB Airport Disk over the wireless network?
    Setup is as follows; Xbox 360 connecting to Airport extreme over 5GHz 802.11a using genuine MS Xbox wireless adapter. Connects to Live just fine. Open NAT. Streams media from connected Vista shared folders and also Media Centre.
    I have connected an external USB drive (Tried as both HFS+ & Fat32 format) to the Airport Extreme. All PC's on the network wired & wireless can access the shared files. Xbox 360 cannot see the external drive over the network no matter what. Have tried connecting via guest network with no security. Drive is seen just fine plugged directly into the Xbox via USB. Am I wasting my time?
    Thanks in advance,
    Cameron

    I'm gonna have to bump as well as I've been looking into this setup (Airport Extreme with USB Attached Hard Drive formatted HFS+ & Xbox 360). I've done many searches on these two products working together and no solution yet. I've read of other (non Apple) routers having a third party software allowing xbox 360 to see usb attached NAS.. Hoping Airport Extreme can provide this solution instead

  • Have a hang-up when playing music through USB

    Hello, everyone! I've got a hi-fi server( Linux Voyagempd) and I stream music files from My Cloud to it. I'm using USB flash drive 3.0 because the music sounds much better than from internal NAS's hdd. The issue is in hang-ups when streaming through NAS's usb port from flash drive. It can occur without any warning at any time. Sometimes I can listen to an all album, but sometimes there's dropping after two songs. If anybody knows any solution to this trouble, please, give me a hint how to solve it. Thanks a lot in advance!

    Hi gleer, welcome to the WD Community. Have you tried using other USB drives to verify if the same problem happens?

  • Interfacing of RS232 serial devices through USB ports within LabVIEW 6.1 and Windows 2000 Pro?

    I have a data acqusition requirement of using 5 RS232 devices, but the motherboard i use only has two serial ports. However, it does have 4 USB ports. Does anyone know if it is possible to use these USB ports to input data from an RS232 device through a serial to USB converter?
    Does LabVIEW 6.1 support this under Windows 2000 Pro?
    Thanks in advance,
    Fraser

    Hi Fraser,
    I just moved an app to a new laptop and had to use a USB to serial comm adapter. At first try the app did not find the comm port.
    After sleeping on it, we downlaoded the most up-to-date driver for the device and upgraded VISA to the latest and gretest version.
    Everything worked fine after that.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for