Playing an iTunes playlist in virtual dj

Hi all. I've created a playlist for my friend's wedding in iTunes. I've reordered the songs to achieve maximum danceability. I want to be able to play it through Virtual DJ (the free edition) in the exact order that I've chosen but whenever I drag and drop the songs they only order themselves alphabetically according to artist or song. Is there any way around this? Thank you in advance.

I have the same problem. I used the info panel in itunes to edit out the explicit word in the first 4 seconds of a Green Day song (Good Riddance) and the formating did not carry over to iphoto. I am rather new at all of this. How can I bring the song, which was downloaded from Apple into garage band, then edit the explicit word out and re-import into my play list in my iphoto slide show. Or how do I make this work in imovie. Any instructions or advice would be appreciated.

Similar Messages

  • When playing an iTunes playlist on my iPhone 5, suddenly it switches to playing music from the cloud.

    When listening to an iTunes playlist on my iPhone 5, it suddenly switches over to playing a song
    from the iCloud instead.

    Hi Clairecrozier,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article helpful:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Best Regards,
    Jeremy

  • Script to play itunes playlist on start?

    I have just done the software upgrade to SL and now my old script doesnt work to auto play an itunes playlist on startup.
    I found the following script as a replacement but it doesnt seem to run automatically on start up.
    tell application "iTunes"
      activate
      play playlist "1jwmix"
    end tell
    I placed this script into Apple Script Editor and saved it in my MUSIC folder. And Yes I added the script to the log in items... so it does currently open on start up. Just doesnt seem to auto run the script.
    Sorry script writing isnt something I understand much about.
    Help please!

    Presuming you've confirmed that the script works correctly when run in AppleScript Editior, make sure you're saving the script as an application, not a script. Then put that application in your startup items.
    Hope this helps.

  • ITunes playlist not playing properly in slideshow

    I have an iPhoto slideshow that I have set to play an iTunes playlist. Within iTunes I've cropped off some of the deadspace in the songs, so that when I watch the slideshow I don't have slides passing by without sound. My problem is that when I play the slideshow, it plays the proper playlist but it doesn't reflect the changes I've made to the songs within iTunes. The songs are playing in their original form. Is there any way around this? Any help would be appreciated. Thanks ahead of time.

    Hi Nick,
    check out this thread
    http://discussions.info.apple.com/webx?128@@.68b4dca6

  • I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change.

    I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ  at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except  the last Library on my computers will make Virtual DJ  recognize it. I tried renameing  the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around  in there. Any help would be appreciated.

    Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.

  • I have given up on my dell and bought an iMac 27"... Now how do I transfer my dell iTunes playlists from my dell to my iMac, as they are showing on the iMac when I plug in my iPod but it's not allowing to me to play them as they are shaded?

    I have given up on my dell and bought an iMac 27"... Now how do I transfer my dell iTunes playlists from my dell to my iMac, as they are showing on the iMac when I plug in my iPod but it's not allowing to me to play them as they are shaded? I have also separately transferred all my music via my external drive from my dell to my iMac which is showing in iTunes but won't upload to my iPod... Just to confuse you even more my AppleTV which is linked to my log in email address and home sharing is showing and playing all the playlists I want to see on my iMac... Phew that was exhausting hope you understand and can help me:-)

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • How do i play iTunes playlists on sonos system

    I have a Sonos system.I have copied the itunes folder on the NAS drive so that I can play my itunes music via the sonos system, this works fine. However how do I get my playlists to play? Sonos manual and support tell me to copy the itunes music libary.xml file to the to the shared drive (NAS) where the music is stored. This I have done but still cannot play the playlists. Help. If I do get a reply can you make it simple with regard to computer speak. Thanks

    Hi guys, I asked Sonos this very question and they came back with this:
    Hello,
    Thank you for contacting Sonos Support. For Sonos to work, just 1 of our components need to be wired to your router/network. The other components will work wireless with the 1 wired component. Please make sure you have an Apple Express with at least 2 ethernet ports, because the Apple Express with one 1 port is incompatible.
    Sonos Setup - https://sonos.custhelp.com/app/answers/detail/a_id/1052/kw/sonos+setup
    Please reply and let me know if you have more questions.
    Regards,
    Ramses
    Sonos Customer Care

  • Is there any way that I can have songs in an iTunes Playlist without having the songs play in my regular music list.  For instance: can I have a Playlist of Christmas songs without having them play in the routine shuffle of my music library?  Thanks -Rog

    Is there any way that I can have songs in an iTunes Playlist without having the songs play in my regular music list.  For instance: can I have a Playlist of Christmas songs without having them play in the routine shuffle of my music library?  Thanks -Rog

    Select the songs, press CTRL+I to Get Info, on the Options tab set Skip when shuffling to Yes.
    If you want to the hide the songs from your main music view you could consider changing the media kind to audiobooks or podcasts if you don't mind the side effect of them showing up there instead.
    tt2

  • ITunes deleted songs/videos/playlists from iPod touch and won't sync them onto iPod, but songs can still be played on iTunes however I just can't transfer them back onto my iPod. HELP!

    Hey, so I'm wondering if any of you can help me with this issue, I'd be unbelievably grateful for any help, I can't resolve it and I dislike my long commute without my iPod to listen to! Thanks in advance
    HOW IT HAPPENED: I had my iPod touch (32GB, 3rd generation) plugged into a speaker charging whilst playing music, and simultaneously I had iTunes (latest version for windows) open on my laptop (Dell - Windows). My iPod started to sync wirelessly with iTunes on my laptop and my music suddenly cut off.
    WHAT HAPPENED: Once the sync had finished, all (almost 4000) songs (and videos) had been wiped off my iPod (including any playlists) with the exception of less than thirty songs, all of which I'd noticed were songs I'd purchased on the iTunes store, a seemingly random selection though - some from a couple of months ago, some from a couple of years ago.
    I closed down everything on my laptop and restarted both laptop, iTunes and iPod then plugged my iPod in to sync. My iTunes library on my laptop is fully intact, complete with playlists, and I'm able to play songs normally from there, however despite numerous attempts, they just won't sync onto my iPod. Interestingly, no apps were deleted from my iPod. There's plenty of room on my iPod now, and even when everything on my iTunes library is synced onto it, there's still around 3GB space, so it can't be an issue to do with lack of space. I have no idea why it's happened, and the settings are for everything on iTunes to be synced to my iPod (I checked again) so it's not an issue with selective items to sync only either.
    A huge thank-you to anyone who can help me!

    I have the same problem!! only thing is that i have the ipod touch 5th generation and a mac. I've been trying to find a way to get all my music to play cuz it will only play on itunes but when i try to play it on my ipod it'll just show a circle with a red square in the middle next to the songs i cant play.

  • Connected Digital AV Adapter to HDMI HD TV. Photo slideshow works fine but cannot play iTunes playlist concurrently (with sound turned off on slideshow)

    Connected Digital AV Adapter from my iPad (64 GB 4G) to my HD TV. Tried playing slideshow (with sound off) concurrently with playing iTunes playlist. Video plays fine but no audio. iTunes volume indicator not showing any volume.

    Just following-up on this posting from a week or two ago and another a few days later about the problems with catch-up TV.  We were disappointed with the lack of service, but as we can get most of the catch-up we want on the Sony Bravia TV, hadn't pursued it with BT perhaps hoping things would improve.
    Got a phone call last week from BT asking if we'd been able to set up the YouView Box OK, which we had.  Mentioned the unsatisfactory service.  She immediately put me through to the BT technical call centre in India where I spoke to guy called Rajiv or something like that.  Asked a few questions and then asked me to switch off the YouView Box (back panel switch) and do a hard-reset on the Homehub Router.  Once this had been done, and the YouView box switched back on.  The service ran fine and has done so since.  I don't know if Rajiv did anything in the network or whether this is just some problem (he called it a "glitch") in the router/YouView box.  Funny that that the speedtest and streaming to the Sony TV works OK.
    He phoned back a couple of days later to see if we'd had any further problems.  Overall good service.  It would be interesting to know from a technical point of view what the problem was and how it was solved.  It shouldn't be necessary to reset boxes in this way.

  • ITunes 9.0.1 will only play one specific playlist

    itunes 9.0.1 will only play one specific playlist, and freezes when I try to do anything else. Had 9.0.0.7, then upgraded...said would fix the problem, but didn't. When I sync iPhone itunes freezes as well. Tried to delete podcasts...froze. Tried to delete duplicate songs...froze. Tried to...you get the picture.
    Any help?

    Problem has been resolved...had to reinstall, then go to add/remove programs and repair iTunes.

  • ATV doesn't show iTunes playlists and doesn't play them using the Remote app

    Hello
    Using ATV3 with the latest software version and it is connected to the iTunes library (also latest version) on my Mac Mini.
    When I go to Computers on the ATV I can see the content of the iTunes and am able to play both Music and Vidoes however I don't see the playlists on iTunes there. On the ATV configuration it is configured to Show playlists -> All but still no Playlists appearing at the top of my movie and TV show listings section.
    When I connect to the ATV using the Remote app on the iPhone and go to Computers there I do see the playlists but unable to play the ones with Vidoes just music.
    Any ideas what would cause these problems...?

    log into my library through more > computers where? on the Remote? This is exactly what i'm doing, I can see the content of my library there but I can't play movies from there.
    Re: ATV doesn't show iTunes playlists and doesn't play them using the Remote app 

  • ITunes Playlist(multiple songs) Does Not Play During Slide Show in IDVD5

    I have a Itunes playlist that contail 3 songs. They play in Iphoto during the slideshow. However, only the first song plays in IDVD 5 andnot the others. But during preview all the songsplay. Anyone have any ideas.

    If you look around the forums, you'll see this is a relatively common problem. Although it makes no sense that Apple lets this continue, a couple options are to Export/Share the slideshow to Full-Quality DV (a Quicktime movie) and:
    - import into iMovie and add the songs, or
    - use Quicktime Pro ($30) to open your songs, then copy and paste them into the slideshow QT file.
    John

  • HT1660 can iTunes Playlists be exported and played from a USB drive or an SD card in Ford Sync ?

    can iTunes Playlists be exported and played from a USB drive or an SD card in Ford Sync ? I've been racking my brain trying to get playlists from itunes onto a flash drive and/or SD card to play in Ford Sync. It seems the playlists are "empty" and not associated with any corresponding music files. Sync responds saying "playlists are empty" ?
    The only "work around" I have been able to do is create separate folders on the flash , and name the folders for each corresponding  playlist and copy and paste the appropriate music into the appropriate folders. The limitation being Sync can not recognize folders by voice commands. It recognizes voice commands for playlists, but apparently NOT iTunes playlists ??
    Help

    My script LocaliseM3U should do something similar in Windows.
    tt2

  • HT1386 My iphone5 itunes playlist seems to have a mind of it's own, after selecting a song to play it will randomly flash through songs on my playlist without stopping. I've rebooting, and restored my iphone with no results. does anyone know how to stop t

    My iphone5 itunes playlist seems to have a mind of it's own, after selecting a song to play it will randomly flash through songs on my playlist without stopping. I've rebooting, and restored my iphone with no results. does anyone know how to stop this from happening? also I am having trouble syncing songs from my library on my computer to my iphone. the songs so up on my playlist on the computer, but will not synch over to my iphone5. Thank you.

    Hi TakesTwo2Tango,
    Thanks for using Apple Support Communities.  It sounds like you should definitely be seeing a plus sign after tapping Edit, so I would try a couple relatively easy things (closing the Music app, resetting the iPhone):
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

Maybe you are looking for

  • Best of the Month – August '14

    On Expert Day, do what Experts do. Set new records! That’s what the HP Support Forum did in August. With preliminary estimates exceeding 8 million total visits to our online community this month, we’re on track to surpass January’s record-setting com

  • Linking Azure website with Remote mysql database in Cpanel

    I am creating an azure website eg calvynlee.azurewebsites.net In my hosting cpanel account, I create a mysql db & user, in order to link the azure website with this mysql db, I had place a "%" in the remote mysql section. It works, but when I remove

  • Purchasing Weight UOM in Item Master

    Hi friends, I want to change the unit of weight in A/P invoice - (weight column in matrix).By default it comes as 'Kg'.How it will  be possible. Thanks Manju

  • Printing from my ipad

    I have a Kodak 9250 All-in-One printer and I'm trying to print from my Ipad 2 but I can't figure out how to make it work!!!

  • Correspondence Printing - Language problem

    Hi all, I am using the following Tcodes to generate customer invoice: *FB12 - Request F.64 - Maintain* The problem is my invoice generated is in German language. What I want is invoice in English ... Now problem can be solved when I went to change th