Playing back audio - can I slow it down and also lower the pitch?
For old-time's sake, I have recently recorded a bunch of old cassettes of me and my mates larking about 20 years ago. The idea is to transfer them to digital format.
However, the cassette recorder we used ran slightly slow, and so when the tapes are played they play back slightly fast with everything at slightly too high a pitch.
I recorded each side of each cassette on a pair of mono tracks in Logic (as there is a noticeable difference in the volume level on the left & right tracks, which I want to correct).
When bouncing to a stereo file, I want the project to play back slightly slow, so it corrects both the speed and pitch issues of the original recordings. The question is - how do I do this? Reducing the tempo setting makes no difference!
I've just installed Logic 9 and Flex Mode looks very useful for reducing the speed of audio files... but it doesn't appear to also lower the pitch.
Can anybody help, please?
Aha! Sussed it!
Click 'Follow Tempo' in the inspector on each track. This activates the Transposition function in the inspector. I've reduced the tempo by 20bpm and set Transposition to -2 on each track.
Hey presto, no longer do me and my mates sound like we had been drinking way too much caffeine two decades ago!
Similar Messages
-
I downloaded an album from i tunes, but it will not play back correctly,
it starts a track and then stops randomly and jumps to the next track
and then does the same thing ad ainfinitum! What to do??Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link. -
Alert! Couldn’t contact Spell Checker. I keep getting this message when I try to type a mail in yahoo. I get the beach ball and it slows down everything.This has been happening since yesterday. Please help if anyone else has had similar problems or has ideas to fix this. Thanks.
Chris,
I am having Spell Check probs too - it underlines, but that's all. I Googled and tried 5 different places for an answer - even 'jumped the pond'....but got no answers.
i started a thread, "Spell Checker on the fritz!!", and got one good and reasonable answer...
only it didn't work. It involved a .plist file, and once you toss one and do a re-start, it's supposed to re-build itself. But, no, SpCk still 'on the fritz'. I'm going to do one more re-start, but otherwise....
May the first one on either thread that gets an answer that works - PLEASE let us all know.
Keep your fingers crossed and hold your mouth right - lol. Nikki B. -
Please help with new emails. I am not receiving new email notification. I have to manually fetch all emails. I have contacted Apple several times. I have powered device all the way down, reset me.com. My me.com account works great on Mac. Please help
So all email notifications were not coming thru...from any source. Talked to another Apple text and he advised me to shut down the multitask bar at the bottom. So far so good. Seems kind of strange because the problem had only started about a month ago. I've had the phone since August
-
Play back audio at slower speed
Hi everyone,
I can play back video clips at slower than normal speed, but I can't find the equivalent method for slowing down audio tracks. For example, how do I play back an audio track at 1/3 of normal speed?
Cheers!Soundtrack.
http://www.geniusdv.com/newsandtutorials/2008/01/time-stretch-function-in-soundtrack-pro.php -
How can I fix: iPad1 plays back audio podcasts (not music) at double speed?
How can I fix: iPad1 plays back audio podcasts (not music) at double speed?
Hello @GiveHP2ndChance,
I understand that you are not able to get adequate sound from your notebook computer's BEATS Audio, and I would be happy to assist you in this matter!
To correct the sound on your system, I recommend following this document on No Sound from Speakers (Windows 7) or for (Windows 8). This should help improve the quality of the audio on your notebook.
To assist you further, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If the same lack of quality is present when headphones are plugged in.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
I recently installed Yosemite from Mavericks. I find that Yosemite is slowing me down and causing havoc on my home web page. How do uninstall Yosemite and get back to Mavericks?
kenmac1969 wrote:
I'm gonna jump in as I have similar issues with Yosemite.
My two old white MacBooks run perfect with Snow leopard, but my 2011 17" i7 Macbook Pro is a dead slug with yosimite installed.
Tried the start with C held down, also with option held down. All it does is beeps at me three times, then again three times.....
I want to remove yosimite and install Snow leopard from dvd as yosimite runs worse than a Windows OS.
Can it be done, what do I need to do please?
Examples of faults, even with a 1tb solid state drive and 16 gig of ram, it is incredibly slow. Took four hours to install Logic 8 last night, I still have to reinstall logic 9 upgrade. On the White MacBooks I got both 8 and 9 installed in under an hour and a half all up.
Beeping on startup means failed RAM.
Slowness is usually caused by incompatible third-party system modifications. -
When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?
from iphoto Help
Album overview
A photo album in iPhoto is just like one you would create with printed photos: It’s a collection of photos you select from your library and arrange in the order you want.
You can create photo albums to:
Focus on a particular subject, such as your favorite nature photos
Group pictures that you want to send to a friend, post on a webpage, or burn to a CD or DVD
Gather a decade of anniversary photos
iPhoto has two kinds of photo albums:
Standard photo albums: You create these albums (B, shown below) by selecting particular photos. You can add new photos by dragging them to the album (or using the Add To button), and you can remove photos at any time. All adding and removing is done manually; iPhoto doesn’t update standard albums automatically as you import new photos.
Smart Albums: iPhoto creates these albums for you, based on criteria your specify. iPhoto then updates Smart Albums (A, shown above) for you as your library changes. For example, you could create a Smart Album containing:
Photos of specific people, such as your family members. As you import new photos, iPhoto uses Faces to detect your family members, and automatically adds new photos of them to the Smart Album (after you’ve confirmed the matches in Faces).
All the photos of your daughter taken on school field trips in third grade. Use Faces (to name your daughter) and keywords (to mark certain photos or events as “field trips”) to help specify the photos you want iPhoto to place in that Smart Album.
Only photos taken with a specific camera, or photos matching other Exchangeable Image File (EXIF) information.
You can make as many albums as you like, and you can include the same photo in several albums without making multiple copies of it.
After you create an album, such as “Australia Adventures,” it appears in your Source list below Albums.
In full-screen view, the album appears as a stack of photos below Albums.
To further organize your library, you can group several albums (along with slideshows and projects) into a folder. For example, you could create a folder containing several years of birthday albums or a collection of albums with photos of your camping trips.
To create a folder, see “Create a folder in the Source list and move items into it” in “Customize the Source list”.
Folders appear only in the Source list, not in full-screen view.
Note: A photo album is different from a photo book, which is a collection of photos you create to get professionally printed and bound. See this topic: Photo book overview.
Copyright © 2014 Apple Inc. All rights reserved.
LN -
My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al FlorezA Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you -
I shot a time lapse video by mistake, how can I slow it down to see it
HHow can Islow down a time lapse video to see it. Shot by mistake
A time lapse video records frames at a set interval. There is NO other information recorded between those frames.
You can slow it down and watch each frame for a longer period of time, but you will see no other information than what is originally recorded.
x -
Logic wont play back audio regions under certain tracks.
Hello! I am rearranging my audio files (throwing them all to my secondary hard drive, where I record to ). I did this, and now certain audio files to do not play back in my logic projects, but there is no warning that says the file cannot be found--which is what I am used to happening. At that point I would either hit the Search button, or the Manually Find button. Instead, the region appears as per usual, just with nothing playing back. I know I could import the audio back into my projects manually--which would be fine for those that start at a specific, clean-cut time, but what about all those spliced and diced regions that are cut up and laid out all over the place!?
I discovered new details to the weirdness . . .
It seems, in the few projects that I relocated audio, that the affected regions cannot be played back unless I move them to another audio track. What??? For example, the vocal track in one song, which is all set up with its plugins and such as Audio Track 2, will produce no sound unless I drag it to another audio track, say Audio Track 3 or 4. It is bonkers!! What the heck is that about?
This is what happened in all of the projects affected by my source audio rearrangement. Sure, I could easily just copy my channel strip settings to a new track, relocate my audio region to it, and hope all goes well thereforth, but I would much rather get to the root of this oddity so it doesn't somehow buck me later.
What do you think it could be?
Oh yea, in one of the projects, all the other audio tracks seem to play back fine, except for the recorded bass track. Okay, so just to check, I drag the bass audio to another track--yep, it does play back. But I realized that the track that held the bass region (Track 4) is actually playing back the vocals (which are also playing back normally in their intended track). I initially didn't notice the extra vocals underneath my normal vocals track, with their low-key bass plug-in settings. Funny thing is, there isn't even a region on Track 4 any more! How is it playing anything back at all?? Not that it makes any more sense that it would be playing back vocals with a bass region.
Also, the fact that Logic Pro keeps quitting unexpectedly does not inspire much confidence. This has just been lately, and I've only been playing with these projects lately, trying to figure this out.
Is my Logic haunted? =(
I welcome any and all objective suggestions! I am feeling just the slightest bit overwhelmed by this odd behavior.
Thanks!
(i checked, but did not see that the tracks were muted in anyway, including the region itself)I figured something out that might tell someone what I did to screw things up!
I think I did something to mess up the environment or something. I know this much now: When I created a new project, I created 6 new audio tracks. I noticed that a piece of previously recorded audio that I imported into the project would only play back on ever other track! I than noticed that on the every other track (that would not play back the audio when it was dragged to it), there was neither a single circle (indicating mono for the track) or the two overlapping circles (indicating stereo for the track) beneath the channel's level meter.
There must be some significance to this that I do not quite understand!
I then went back and launched several of my problematic projects to see if the tracks that would not play back audio also did not display either the mono or stereo circles on their respective channel strips. They did not! What kind of global setting did I change that would cause this?
There was one project that had one track that bared neither mono or stereo an played back its audio (Although, in this same project, there was another track that bared neither symbol that was not playing back its audio). Anyway, I noticed something that was weird to me, but will likely tell someone what the heck I must have inadvertently done to cause all of this:
When I change one audio track (that bares the mono symbol) into stereo, the next audio track (that didn't display either symbol) seems like it is combined with the previous track's output!
Very strange! Did I somehow set some global preference to split up my audio tracks across each not audio track?? If so, could someone please explain to me what and I did that? Thanks! -
hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??
Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
When i play a game on my ipod touch it shut down and goes to the home screen
when i play a game on my ipod touch it shuts down and goes to the home screen
This means your iPod touch app just crashed
-
I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?
it recognizes the iPOD but I can't get any of the new songs to import to the iPOD
are you getting an error message, Odessa? if so, what does it say? include error message numbers if you're getting any.
if you're not getting an error message, describe what happens when you try to transfer songs to the ipod as best you can. -
My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone
Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise
Maybe you are looking for
-
I have used Acrobat 9 Standard for years. It recently stopped working. When I start it, I get a message that I must uninstall/reinstall. A repair attempt failed to fix the problem, so I started an uninstall. That locked up and I had to shut it do
-
How to Install PHP in PL/SQL??
Hello!! How to install php in pl/sql ??
-
Hidden & locked layers appear in pdfs
For some reason, and all of a sudden, hidden (and locked) layers containing content are showing up in Acrobat conversions. This is a huge pain: I send a pdf version of a graphic to a client, and they can see every layer, even though I have it hidden
-
When using DataGuard, the logical standby DB is already "OPEN"?
When I was setting up the physical standby DB several years ago no DataGuard got involved), I had the impression that the standby DB is in MOUNT status. But since when using DataGuard to set up the logical standby DB, the logical standby DB can be us
-
Hi Experts, I have a client requirement to have an interactive costing sheet. Scenario happens in case of a new product development. The expectation being, if I input the raw materials and the activities required for a particular finished product a