Playing Burned DVD's - some work, some stop and pixelate

I created my first DVD project with Final Cut Pro and finished it in DVD Studio Pro. I played it on my 2004 Panasonic DVD player without a problem, but when I sent it to family and friends many of them said there was chatter and sometimes it hung up and would not play right. I am trying to figure out if there is a specific DVD to use or is it formatting (DVD-R, or DVD+R) or are there settings I am missing in DVD Studio Pro that I should be using?

Hi Setla,
And welcome to the forum. If it looks fine on your set top box and you used the same media as the disks you sent to your friends. Then I would drop the encoding bit rate and / or convert your audio to dolby (if thats applicable). Compressor checks for a maximum bit rate on build but that doesn't necessarily mean all players will be able to handle this (stacks of variables). My first choice would be to convert the audio and then if need be attack the video.
When making DVD's I would also recommend using something like Toast as this will go through a verify cycle which should rule out any dodgy media or writes.
Enjoy.

Similar Messages

Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

You would need to have burned the disc using iDVD or a third-party application such as Toast. Is that what you did?

Superdrive won't play burned DVDs

So now my SuperDrive won't play DVDs that were burned by my superdrive. It will play store bought DVDs, however its hit or miss with the burned DVDs, every once in a while it will recognize a burned DVD, but most of the time you can hear it trying to read the disc and then just ejects it...these are DVDs that I burned on this computer. What gives, I would think that it should be able to play burned DVDs, especially when they were burned using the same drive. Any suggestions would be helpful.
Is it me or does it seem like the quality of Apple Products has gone down over the years. I rarely had any issues with my older Apple Laptops, however, it seems like I'm constantly on this discussion trying to solve some sort of problem with this one. Thought I was upgrading when I bought this 17" PB, well I got a faster laptop, along with a bunch of headaches trying to fix it...somebody please give me some answers.

The problem is 2 fold.
You must use good quality Media. Not bargin basement cheap media. This more than any other thing is a huge problem. I find that using 16X DVD-R Media. This is the most recognised of all media for player, and computer recognition.
Most users make there biggest mistake by buying cheap media and then can't fiqure out why they have a problem.
Next It is a Software problem. Apple's media can sometimes be a problem to learn and use and is very limited as to it's capability.
I find that if you plan on doing a lot of burning you need to have a top of the line software.
http://www.roxio.com/
This software comes with several features, This software will burn
Video TS
Audio
Data
And most importantly has an automatic compression feature, that will compress Video TS folders that are larger than 4.7gb to fit on a standard 4.7gb disc.
If you plan to do dvd burning here are 3 links that will not only back up what I have stated above, but gives all users a ton of important information.
http://www.videohelp.com/dvd
http://www.digitalfaq.com/dvdguides/basics/dvdintro.htm
http://www.digitalfaq.com/media/dvdmedia.htm

Apple iOS is ****.... I just update my apps then for some reason is stop and can't use it.. If you delete and reinstall your apps profile will be lost..

Apple iOS is ****.... I just update my apps then for some reason is stop and can't use it.. If you delete and reinstall your apps profile will be lost....
There's no rollback in the application if you encountered failed during the installation.. The application profile will be lost... ****....

Try update the app using iTune (computer) and sync to iPad.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/47e895d853a70f226f0 e254ed8bca59f.jpg

Ken Burns effects are unsmooth. They stop and start, also stutter as they zoom. Can anyone advise?

Ken Burns effects are unsmooth. They stop and start, also stutter as they zoom. Can anyone advise?

Are you noticing this while playing back a project you're working on in iMovie or are you notivinh it in finsihed projects (i.e. projects you output or Shared)?
If the former, that could indicate something about your hardware configuration that's struggling to keep up with rendering your project on the fly while it's playing in iMovie. Are you running other apps? Do you have limited hard drive space?
What are the specs of your Mac?
Matt

HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well. What settings can I change to

I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

TS3297 I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Problems with burned DVD in iDVD - Works in some players, not in others

Hi, I'm having a strange problem with a DVD I burned in iDVD.
I have a disc image that I made in iDVD and then burn the Audio_TS and Video_TS folders to a DVD.
I burned to a Memorex DVD+R.
The video pops up fine and plays on my computer after it burns, but if I eject the disc and try to re-insert it, the DVD preview says "Supported disc not found". It did this same thing when I tried it in my Macbook.
It works fine in my standard DVD player, but I also tried it on my Playstation 3 and it did not play.
A few things I am going to try is buring directly from iDVD instead of first making a disc image, and also using DVD-R, although I heard that DVD+R is generally a better format to use.
Someone also told me that DVD+R does not play on macs, which I question.
If anyone has any other suggestions or might know why this is happening, I would greatly appreciate it. It is an important project that needs to be done soon! Thanks.
Message was edited by: Nathan Edwards1

The disc image option is within iDVD: File > Save as Disc Image. If you switch to DVD map map mode you can drag your movie to a spot prior to the menu so that the movie plays automatically when put into the player. Under advanced, you can set the movie to loop.... otherwise I think it goes back to the menu when done playing. BTW, all DVDs MUST have a menu it is part of the DVD specification. It is just a matter of whether you see the menu. As far as exporting your project back to tape... you won't loose any quality and your audio, along with your video and any editing to each will export back to tape. However, a MP3 is not generally considered a higher quality file (although perhaps the recorder was closer to the source?). As a matter of fact, if you are editing your audio I strongly suggest using a file sampled at at least 16-bit/48Khz, AIFF (or WAV or anything lossless).
In regards to the slow burn speed: I agree that a slower burn speed is better than the fastest burn speed (due to error corrections ect). However, I would choose a middle of the road burn speed. If my choices are 4x, 6x, or 8x, I would choose 6x. If it is 2x, 4x, 6x, I would choose 4x. And yes, quality of blank media can effect the playback of a disc that played once just fine.
Mike

Burned DVD does not work in all players

Hi all,
I am quite new to authoring my own DVDs, but since I married more or less recently I thought it is a nice idea to author a DVD with our wedding pictures for family and friends. So I spent enough time in iDVD selecting themes, slide shows, music etc. Finally a previewed everything and - yeah - happy.
So I wrote a disk image and burned this using the apple disk tool. So far so good. Mounting the newly recorded DVD workes perfect and the DVD player app works like no charm. Every menu, sound - as I want it.
Happy, running down to the living room and try it in the stand alone DVD player (Sony HD recorder) and - big disappointment. DVD runs, first menu pops up, and the slide show starts. But after the end, it does not return to the menu, it just keeps looping the slideshow. To make it even worse, the menu button on the remote just restarts the slideshow. What the f... is wrong?
Is there something I can to / configure to make it work correctly?
Any help is appreciated.
Thanks & Cheers,
Daniel

Daniel,
On your mac, open the disc image with apple's dvd player application. Assuming it plays exactly as expected and there are no issues with scene selections, buttons, etc.
Now you can use apple's disc utility (or Roxio Toast) to burn it to dvd-r. I recommend Verbatim, Taiyo Yuden, or Maxell for best results. Do not exceed 4x burn speed.
Let's say you get this far and the burned dvd plays perfectly on your mac. Now it's time to try it out on a set top dvd player. Sony makes some fantastic dvd players but I would try other players as well. Best place to do this is at a store that sells dvd players like Fry's Electronics, Best Buy, Walmart, or whatever stores are available in your own area.
Hand the dvd you created to a salesperson at one of these stores and ask the him/her to help you test drive a variety of set top dvd players to see which ones accept the dvd in question. My guess is that it will work fine on most of these players but if not just come on back for more help.
Message was edited by: SDMacuser

Problem playing burned dvd outside North America

Hello !
So i burned a dvd on my mac (bought in cupertino), with some pictures(jpg/png) and videos(mp4/mov). I sent this dvd to my folks in India, and on their PCs it simply wont read the dvd. I verified that the dvd works properly on my windows laptop here in Toronto.
Any idea why the dvd wont play on windows PC / laptop in India, but works fine here in north america ?
Is there some setting 'international' or somethin that should be set/unset when burning ?
Thanks !

Hi Setla,
And welcome to the forum. If it looks fine on your set top box and you used the same media as the disks you sent to your friends. Then I would drop the encoding bit rate and / or convert your audio to dolby (if thats applicable). Compressor checks for a maximum bit rate on build but that doesn't necessarily mean all players will be able to handle this (stacks of variables). My first choice would be to convert the audio and then if need be attack the video.
When making DVD's I would also recommend using something like Toast as this will go through a verify cycle which should rule out any dodgy media or writes.
Enjoy.

No sound when playing burned DVD with Windows Media Player

Hello!
I made a 10 minute movie which I burned , tested and delivered today.
But it turns out that when playing the DVD with WMP, there is no sound.
I had tested the movie playing it with powerDVD, and it worked as it should. When playing it with a normal DVD player and TV it works allright.
But I had not tested it with WMP. And sure enough, when playing it with WMP there is no sound!
The ones who will show the DVD will do it from a computer to a video projector, and maybe they don't have a "proper" DVD program installed. But I heard that there was sound when playing with "VLC" which is a relief.
But I feel the need to get to the bottom of why there is no sound with WMP? Any clues?

In NTSC-land, one has but two choices: PCM/WAV or DD AC3, which is a particular "flavor" of MPEG. In PAL-land, one does have the option of MPEG (not DD AC3) as an option, but that seems to be falling out of favor.
When MS was re-tooling WMP, they wanted to add back the functionality of commercial (pressed/replicated) DVD's, but sought to limit any burned DVD's. Do not know what the mindset is now, so much could have changed with a few iterations of WMP. I have to admit that I just do not reach for it that often.
In the Project, or Disc, menus, one can tell En which Audio Transcoding to use. As John T, suggests, I would definitely do a test with PCM/WAV, and X my fingers.
If your client(s) is/are set on WMP as the player, there is hopefully a scheme that you can get to work. Also, remember that some older versions of WMP might not play the DVD at all, unless one finds the right plug-in, that basically hacked the intended setup in those older versions. Just like when delivering to a client, and not knowing their systems' calibration, or setup, trying to cover every base in a particular player software might involve a lot of work, and prayer.
Good luck,
Hunt

Burned DVDs will no work with PC

My PC reads all other DVDs fine. My burned DVD I made with iDVD plays fine on my MAC and also plays fine in regular DVD players. However, my PC won't even recognize my iDVD-made disc. I also tried it on a friends PC, same thing, won't even recognize it. It's like it's not even there. Does apple just rig everything not to work with PC or what is the deal?

No it's not "rigged". Nor is apple proprietary in this regard. Keep in mind the PC must have a drive capable of reading a DVD-R, and the software necessary to play and decode MPEG2.
Most macs will read and play Dvd's straight out of the box. Not always the case for most PC's. Real Player and Windows Media Player won't necessarily play DVDs unless there is an MPEG2 codec present in the system. I searched this topic over the internet and found what I think is a relatively good answer in spite of the fact the title of the article is misleading since there is no such software as "iDVD HD". At least not to the best of my knowledge (unlike "iMovie HD").
http://answers.yahoo.com/question/index?qid=20080323180836AArptJh
This second link is also informative:
http://discussions.info.apple.com/thread.jspa?threadID=2102239&tstart=270&start= 15
Message was edited by: SDMacuser

Unable to play burned DVD

Hi,
I part-time video edit and my latest customer complained that the DVD I gave her couldn't be played in her DVD Player. I made the project using Final Cut Pro, exported it via Compressor and burned the .ac3 and .m2v in DVD Studio Pro.
I tried playing the burned DVD in a PC and found that I needed to download a codec in order to play the video. This is on an XP and goes the same on Vista. However, it plays fine in QT on a Mac.
I have 2 DVD players, the conventional one where it only plays DVDs and a newer one where it can read & play movies on thumbdrives/hard drives via USB too. On the newer one, the DVD plays just fine. However, on the older one, it doesn't. So I assume the customer's DVD player is similar to my older one which can't play my burned DVDs.
What is causing this problem and how do I solve it? My projects burned using Adobe Premiere Elements work fine. I'm using DVD-R printable.

How did you burn the ac3 and m2v file in DVD SP? Did you create tracks? Did you create menus? If your disc will not play in a stand alone DVD player then you did not author it correctly. A PC would only download a codec if it's seeing the disc as something other than a properly authored video DVD.

Will Not Play Burned DVDs

I have a white macbook, and for christmas i recieved a dvd recorder. Its a Magnavox and here is a picture, I don't know the specs on the recorder.
http://www.samsclub.com/shopping/navigate.do?dest=5&item=334340
I recorded something off of the tv, and i went to play it on my computer and the "You Have Insterted a Blank DVD" menu pops up. When i open up my dvd ripping program, it does not recongise the disk either. When i put the disk into a dvd player, it plays fine. Is their a program that i can buy to get this to work, or am i just out of luck?
Thanks
MacBook 1 gig ram, 120 gig hd Mac OS X (10.4.8)

What media are you using? DVD+R or DVD-R? I'm still trying to find the specs, but I think know that my +R DVD's work just fine once burned. Very well might be the reason.

Dvd player 3.2 unable to play burned dvd- Any suggestions?

Hello all,
I'm trying to play a burned dvd movie on my dvd player 3.2, but the dvd player doesn't automatically start playing it. My ibook, 10.2.8, doesn't seem to be able to read it. However, I tried the dvd on a new Mac and it works.
Any suggestions on what to do, besides buying a new Mac? Thanks!

I can't find the "post new topic" so I'm choosing
"reply" and hoping someone can help.
The new topic button is at the root level of each forum (like iDVD 5 or iDVD 6) towards the upper left corner. You won't see it when you are looking at someone else's messages.
I have an iMac, 10.2.8, with a DVD Player 3.2 that
has been working fine for several years.
The last few weeks when I put in a commercially made
DVD, it won't play. It doesn't automatically show up
on the desktop, and when I manually open the DVD
Player, it doesn't read the disk although the program
opens without problem. This isn't happening to all
commercial DVDs, but most.
This isn't happening to all commercial DVDs - Doesn't sound like a problem with Apple's DVD Player application - you may have a dirty lens in your DVD drive.

Playing Burned DVD's - some work, some stop and pixelate

Similar Messages

Maybe you are looking for