Playing deinterlaced avi files in quicktime 10

I'm trying to play a deinterlaced avi file in quicktime 10. its not working. is there a codec or something that i need to download to get it to play? the file must remain deinterlaced. thanks in advance for any info!

i have perian installed it doesnt work?
You can check what codec the movie uses, but since Perian didn't handle it, there probably isn't a Mac OS X component which will.
(54383)

Similar Messages

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

Play AVI File On Quicktime

I have a new macbook pro (new to apple former pc quy) and i want to play an AVI file in quicktime but it cant read it. When i play it on my PC it plays fine in Real Player so i downlaoded Real Player for mac and it still wont work????
ANy help will do
thanks
Brad

I just solved this issue on my machine. Something in the Perian bundle also conflicts with Intel core MacBooks. I finally resolved the issue and avoided the white screen by removing ALL 3rd party QT plugins (including Perian) and restarted. I was then able to view the AVI files and avoid the white screen. When I added back Perian, I could again not see the files. So, the solve is remove ALL QT 3rd party plugins. I suppose you can add Perian back after you have used the files you require, but be aware there is still an Intel conflict within Perian for certain AVI files.

HT3775 i try to play an AVI file and it says the codes isnt supported?

I'm trying to play an avi file. Quicktime won't play it because the required codec isnt available but when I click on 'tell me more' button it does list avi as a file format that is should play. First the file would play in VLC but then I installed some updates and now it doesnt play it anymore? What's going on?

AVI isn't a audio format, but merely a container or wrapper around the codec. So, just because it is an AVI doesn't mean it is the same as every other AVI.
VLC can usually play just about everything. Were the updates to VLC or to the OS?

Sound cuts out after 1 sec on .avi files in QuickTime

First, let me preface this post by saying that I have spent about a week searching through different posts in these and other forums regarding similar issues, and have yet to find a solution that works for me.
So I have been trying to play certain .avi files with QuickTime that I BELIEVE have been encoded with the XviD codec. At first, no sound played at all. After installing a bunch of different codec files, including packages such as Perian and codecs such as DivX, XviD, and AC3. I finally managed to get QuickTime to play these videos with sound for about a second, after which the sound cuts out. Also, if I rewind or skip to another point in the video, the sound will restart again for about one second and then cut out once more.
I should mention that these videos work perfectly when I play them with the DivX player. Does anyone have any suggestions or anyone with similar issues? I am currently running OS X 10.7 (Lion) on a new MacBook Pro 15"

After installing a bunch of different codec files, including packages such as Perian and codecs such as DivX, XviD, and AC3. I finally managed to get QuickTime to play these videos with sound for about a second, after which the sound cuts out. Also, if I rewind or skip to another point in the video, the sound will restart again for about one second and then cut out once more...Does anyone have any suggestions or anyone with similar issues?
As stated on the Perian "Support" web page, "Please consider removing obsolete QuickTime Components: FFusion, Xvid Delegate, 3ivX, DivX, DivX Decoder, XviD, msmpeg4v1, msmpeg4v2, AviImporter, EX_M4S2, Casio AVI Importer, AC3 Codec, and MatroskaQT." Having multiple codecs for the same compression formats can create component conflicts. Since Perian component package supports all of the named codecs, it is not necessary to have both Perian and the named codecs simultaneously installed.
In addition, Lion seems to also be prone to conflicts with third-party software apps and hardware peripheral casrds/devices. If possible, it is usually best to disconnect/close anything you can during the tests. Also, it might be a good idea to test the same files on alternative systems. (I.e., if possible, you might like to post a sample problem file to see if others can play them without problem on other platforms operating under Lion OS as a further conflict test.)

How to play avi files in quicktime

I am transferring all my files to my mac from pc. How do I enable quicktime 7 pro to play my avi files???

As you are not only switching from pc to mac, but also intel, a couple of suggestions from one intel mac user to another:
1) Download the DivX for intel beta here:
http://labs.divx.com/node/76
Installing should allow your QT player to function well with most codecs that you commonly find which use the .avi container - it's helped me quite a bit.
2) Download and install the Flip4Mac component for Quicktime here:
http://www.flip4mac.com/wmv.htm
This is an alternative for those pesky WMV files you need to play. Keep in mind that although the component installs and works on your intel mac, it is not yet optimized, so you need to run QT under rosetta in order to see the functionality of the flip4mac component. The intel mac version is on the horizon, hopefully sooner rather than later.
3) Download iSquint or likewise another conversion app. I'm offering up iSquint for now since it is free, easy and universal. You might opt for ffmpegX, MPEG Streamclip or others, but these do not run natively on your machine at this time, and you might find them a little confusing. iSquint will read pretty much any kind of codec and container combo, and it does quick conversions to mp4/H.264 files that your QT Player will recognize...
http://www.isquint.org/
4) Download and install the latest build of VLC for intel mac:
http://nightlies.videolan.org/build/macosx-intel/
The latest build of this player has been rocking along nicely for me on the intel machine, and VLC is a great alternative for those video files you come across that just don't want to play in other video apps.
20" iMac Intel Core Duo 2.0 GHz Mac OS X (10.4.5)

Can't play .avi file by QuickTime Pro

I am a paid QuickTime Pro user. However, I can't play some .avi files. No images, no sound. It just pop up a window shows,
" Additional software is required for QuickTime to playback this media. It may be available from the QuickTime Components page. Click Continue to check for the software."
Then it leads me to the following page,
http://www.apple.com/quicktime/resources/components.html?os=OSX&ctype=696d6463&c subtype=58564944
If any of you confront this problem? And how did you resolve it?
Thanks a lot
Julia

You need Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

Playing avI files on QuickTime

I'm new to Mac and QuickTime and I can't open some AVI files in QuickTime that I downloaded. I want to use the downoaded AVI files in iDVD to create a DVD movie.

1. I think VLC, 3ivx® D4 CODEC, MPlayer these player all can help U to play avi on mac, and if you still want to play avi files on quicketime, maybe you should install *_DivX for Mac CODEC_*.
2. If you want to use these avi to create a DVD Movie, Just follow this guide :
*_Convert AVI to DVD on Mac_*

Playing AVI File In Quicktime

Ok, here is my problem. I used to have Windows XP on my computer with Quicktime installed. I also had the DivX Suite (including the DivX codec) installed. I had no trouble playing *.avi files in Quicktime. However, now I have upgraded to Vista, I have done the same thing, installed Quicktime as well as the DivX Suite, but every time that I attempt to play *.avi files in Quicktime (I have tried several different files) I continue to get the error message that "Additional software is required for Quicktime to play back this media. It may be available from the Quicktime Components page." and it shows me that I need to download DivX. I have tried uninstalling DivX and downloading a fresh copy and installing. Same thing with Quicktime, but no luck. I have also tried installing the Xvid applications and still nothing. Does anyone have a guess at what it could be and is there something else that I need to do?

I have a question for you instead of any help. I have XP with Quicktime installed. Both DivX and Xvid are installed and I can't get it to play .avi files with Quicktime. All it does is plays about a half second of audio then nothing. It used to pop up the additional software message, not sure if that is still the case. Media Player plays them no problem, but I personally can't stand WMP or any other Microsoft product for that matter. Is there some hidden setting that I need to adjust to make it work? Any advise would be appreciated. Thanks.

Can't open avi files in quicktime 7.5

When I try to open avi files with quicktime .5 i am told that Quicktime needs soe extra files and am taken to the quicktime page on appl.com What files do i need? Any suggestions welcome!

'AVI' is a container which can house a variety of codecs.
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, 3.1, 3.1.1, QT 7.3, 7.4.x and 7.5 and OS 10.4.11.
Assuming you already run Tiger versions OS 10.4.11 and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 11 (which is no longer in beta) for Mac from (you may need a different site for the US):
http://uk.real.com/player/mac/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed all the correct version for your Mac of Security Updates up to and including 2008-003. (N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
And now there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash should be. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards):
http://silverlight.net/GetStarted/
FOOTNOTE
If you are running Leopard:
Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

How to export/watch .avi files using Quicktime Pro

Hi there.
I've got Quicktime Pro and I'm trying to convert .avi files so I can play them on my iPhone. I open up the .avi file in Quicktime and then slect the Movie to iPhone option.
It will take about 20 mins or so, but when I open the file all I get is a white screen even though the timer is showing that the movie is playing.
I can't even watch .avi files using Quicktime as all I get is a black screen.
Could someone please help?
Thanks

Thanks, but unfortuntately that didnt work. MPEG Streamclip couldn't play any of the .avi files, it still came up with a white screen while playing.
I tried this with a number of .avi files but I had the same problem.

Have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
(97189)

AVI files in quicktime

i tried to load an avi file in quicktime but a window popped up that i needed additional software, downloaded all the softwares and none of them worked.
i use ffdshow for my codecs, i dont know why it wont start up when i choose to open the avi file in quicktime, when i open the avi's with windows media player 2 icons 1 for video and other for audio shows down in the right corner.
i need it to work with version 7 or newer cause thats the only media player photoshop cs3 extended is compatible with.

so i assume i should contact support about this or what?

How can the Windows Media Player 12 be made to play WVC210 .avi files?

I just built a new computer and it won't play the motion captured videos of the WVC210. It has Windows 7 Home Premium as the operating system. My machines running XP play the WVC210 files GREAT. Is there a codec I can add to the WMP12 so that it will play the .avi files. I have 3 cameras around the property, 2 WVC210 and 1 WVC200. 1 camera has the audio turned off so switching to MP4 (no audio) made that work OK. But the camera in the office I need to have audio and would rather stick to WMP over something like VLC. VLC plays the files fine but I much prefer WMP. I'm hopeing to find out how to have Windows Media Player 12 play the .AVI files from the WVC210 cameras. Any Help??

There appears to be issues with codecs on WMP 12 and Windows 7
AND\OR your WMP is missing the necessary codecs.
Google the Net and you should find different things to try
for the WMP 12.
Troubleshoot problems in Windows Media Player
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-in-Windows-Media-Player
It looks like additional codecs may needed to download with WMP12 and windows 7
http://www.tech-exclusive.com/2009/01/22/download-windows-7-codec-pack-for-windows-media-player-12/
Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
http://www.microsoft.com/downloads/details.aspx?FamilyID=31017ed3-166a-4c75-b90c-a6cef9b414c4&displaylang=en
Information about the Multimedia file types that Windows Media Player supports
http://support.microsoft.com/kb/316992
Another possible solution:
K-Lite Codec Pack 5.9.0 Full, Standard and Basic
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
I hope this helps let us know how it goes!
T.

Playing deinterlaced avi files in quicktime 10

Similar Messages

Maybe you are looking for