Playing ipod configured with 7.4 from XP platform on Windows 2000 with 7.3

I have a classic 80 configured with itunes v 7.4 from XP machine but want to just play music through office machine equipped with windows 2000. itunes only supports version 7.3 on win 2000. How can I configure my ipod just to play on that version?

+When I check the ipod once completed nothing there. The software version shows as 1.2.2. When I try to upgrade is says it already upgraded. If I try to restore it still stays as 1.2.2. Not sure what the problem is.+
Firmware version 1.2.2 ... sounds like you've got a 5th generation iPod.
If so, try the *Windows 2000* instructions (for reverting back to firmware 1.2.1) given in the following document:
iPod (5th generation): Songs and other content do not appear after updating to software version 1.2.2

Similar Messages

ORADC problem on Windows 2000 with Service pack 1 and service pack 2

Hi,
I have a VB application running on NT4.0 workstations. It uses
ORADC control to talk to ORACLE 7.3 When I load it on Windows
2000 with service pack 1 or service pack 2, I encounter some
problems.
The ORADC control is used in most of the VB forms and the
Refresh method of the ORADC conrol is used to refresh the APEX
TRUE DBGRID PRO control. When this action is executed, I receive
a run time error
"Method Refresh of object '_DORADC' failed Err#: -2147417848
It works fine when no service pack is applied on Win2K.
Can anyone tell me what's going on?
Thanks

satheesh_p wrote:
Thanks for your reply.
When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
link http://www.adobe.com/products/coldfusion/systemreqs/.
Whether your OS is windows 2003 with service pack 2?
Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
Regards,
Satheesh.
Well it was there, if you understand the naming properly:
ColdFusion 8 system requirements
Windows
Intel® Pentium® II or AMD Athlon processor
Microsoft®
Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
Advanced Server, or Datacenter Server with Service Pack 3; Windows
Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
or Windows Vista®
R2 is the "offical" Microsoft name for service pack 2.

Compatibility of windows xp with labview and windows 2000 with labview

I have a very weird situation that I am not sure even I can decribe it clearly. The thing is we have two set of equipments. One: windows 2000 with DAQ card, PCI card, the other is windows xp with same DAQ card and PCI card. All the labview software are the same version. All the program are the same. But the program on windows xp has a really weird problem. Sometimes, the signal is wiped out when I run the program and sometimes it doesn't. I am curious whether the two windows system have different order sequency. Is it clear? I am really sorry about the description since the problem is really strange. Thank you very much!

With more research, I think I probably find the problem but I don't know how to fix it. Here is how the program work. In Calibrate LC.vi, there are four buttons of "set". When you hit set button, the program will aquire 10 data points which will form the signal we need. But the problem is when I hit set button, no signal at all.So I am thinking the program didn't aquire any data in. I uploaded the Calibrate LC vi and also the Aquire Data vi. Does anyone can give a suggestion how on to fix the problem? Also, I double checked the PCI card. The interrupt request for PCI 6036E in windows2000 computer is 19, that in windows xp computer is 21. Will this be a problem too? Thanks!
Attachments:
Acquire LC Calibration Data.vi ‏34 KB
Calibrate LC.vi ‏108 KB

Can I activate iPhone 4S with a SIM from one country and then use with a SIM from another country?

I bought a factory unlocked iPhone 4S from an Apple store in the U.S. and I am in Guatemala. I want to use it now but later on I will move to New Zealand. Can I activate it with a SIM card from Guatemala and then use it with a SIM card from New Zealand? I am just wondering if it will get locked with the Guatemalan SIM card. Or does it just need a SIM from any supported carrier and then it remains unlocked to use with any other carrier? Thanks

David,
As I (mis)understand it, you may:
1) Copy one orange gradient path to the magenta gradient path document;
2) Select the two magenta gradient paths and change the Fill to None;
3) Select the orange gradient path;
4) Select the two magenta gradient paths and change the Fill to Gradient.
That should give you the desired replacement. For multiple use of the same gradient, you may consider a gradient swatch.

Firefox 12 won't start after upgrade from 3.6 in Windows XP with SP3

When I start up firefox after an upgrade to 12 on my Windows XP with SP3 I see the firefox.exe process in Window's Task Manager but it never starts i.e. I never see a browser page. If I try to start it again I get an error message that it is already running.
I have rebooted and even uninstalled/reinstalled Firefox but no browser appears.
Is it possible for my to download the version I had (3.6) and I can just live with that or is there a work-around to get Firefox 12 to work on my desktop?
Thanks

Well I was able to run the profile creator one time (firefox.exe -p) and I created a profile with it but still not able to start firefox. So I tried to start it again after rebooting. It starts a process which I can see in Task Manager but now I don't get either the Profile Manager dialog box or FF.
I also tried to start the profile manager with this command: "C:\Program Files\Mozilla Firefox\firefox.exe" -p.
I terminated the firefox process and tried again but get the same results.
BTW, this command: %APPDATA%\MOZILLA\FIREFOX\PROFILES shows a profile called m6woxz30.default, which is not the name I choice for my profile the one time I got the Profile Manager to run.
BTW, thanks for your help and ideas.

IPod will not charge when iTunes in open in Windows 2000

I have a problem with WIndows 2000 iTunes install where the iPod will connect but as soon as it has finished synchronizing the iPod will go back to the main screen and stop charging. I saw several posts on this with no resolution.
I dont have a fix yet but I do have a work around.
Fire up iTunes and plug in the iPOD. It will recognize it and sync. Then select Options and in the iPOD tab uncheck the box which says " launch iTunes when iPOD connects" or something similar. Apply and Exit from options menu.
iTunes will resync with the iPOD. You can now disconnect the iPOD and close iTunes.
Now if you connect the iPOD, iTunes will NOT launch and the iPOD will charge fine, at least mine does:-)
If you now run iTunes it will still connect automatically with the iPOD as before and do all the usual stuff. The only downside to this workaround is that you have to manually start iTunes ( hardly a big deal) and close it and disconnect then reconnect the iPOD ( or just connect it and not start iTunes) for it to charge.
Works for me.
There was a lot of black magic quoted on this support site relating to buying chargers, third party or otherwise and USB not having enough power on thursdays with a 7 in the date or having to use a powered hub of a particular color , alien interference etc etc. All bogus.
Its an Apple software problem and I hope they fix it in the next iTunes release.
Hope this helps.

Thanks for the info, but I finally found what was the problem.
It seems to be related to Itunes config and Nano firmware. I found another post talking about this "Topic: Self-ejecting Nano".
I had to enable disk use in ipod options, but this causes me to manually eject Nano.

Problem Installing 817 on Windows 2000 with RAID Array

I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
Martin

Here are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael

NI-488.2 v. 1.70 aborts install on Windows 2000 with Error 1311 - can't find m4.CAB

NI-488.2 v. 1.70 aborts installation on a Windows 2000 PC with the error message "Error 1311 - can't find m4.CAB." The installation was attempted from a NI CD part number 500739E-00 (July 2000).
There was no GPIB card present in the PC at the time of the installation. I am running Windows 2000 Professional SP2, build 2195, on a Dell Precision 340 workstation.

Here is the m4.cab as an attachment.
Attachments:
m4.cab ‏45 KB

Problems with Sound Blaster Live! 1024 and Windows 2000 Profession

Hello everybody, and thank you since now for your help and support.
Please, forgive my english (I'm italian) not so good, but I hope you can understand me the same.
I have a Sound Blaster Li've! 024, and so far everything works fine with <EM>Windows 98 SE</EM>, but lately I have installed <EM>Windows 2000 Professional </EM>on my PC, and now nothing works.
Nothing, neither the softwares, they don't even start!
Here is what I tried so far:
- First, I tried to install the old version of the programs, the ones that I had in the CD-ROM when I bought the sound card. At this point, I couldn't even uninstall the softwares!
- Then, I tried to update the drivers, but it seems that they're already updated when you install Win2000, and the uninstallation didn't works yet.
- At last, I have downloaded the new software pack, Li'veDrvUni-Pack.exe, but nothing even so. But with this, at least, I was able to uninstall everything from the PC (even if not perfectly).
- Today, I tried to install only the new pack, Li'veDrvUni-Pack.exe, but still nothing works. When I start running the program (e.g. AudioHQ), I can see the hourglass for few seconds and then everything aborts.
Please, help me! What can I do? I really don't want to buy a new sound card, even because my SB Li've! 024 works perfectly until now.
Thank you very much for the attention and for your suggestions.
Andrea Iovinelli

Driver for Sound Blaster Li've! 024 for Vista
i have Sound Blaster Li've! 024 , and Vista, and sound is totaly s*it or not working.. but, you can install drivers from Russians and all will work fine with good quality!
http://kxproject.lugosoft.com
Tags:
SoundBlaster Li've! 024 Vista driver Sound Blaster Li've! 024 for Vista Driver Download Driver For Sound Blaster Li've 024 Vista

How to De-authorize an older PC running Windows 2000 with iTunes 7? My itunes will not connect with the iTunes store to all the de-auth request.

How to De-authorize an older PC running Windows 2000 PC with iTunes 7? My itunes will not connect with the iTunes store to all the deauth request.

The "Deauthorize All" command is only available if iTunes thinks you are currently using 5 authorizations.
Otherwise, you can only deauthorize the old computer by using "Deauthorize this computer" from the computer itself.
If the old computer is no longer operable, you can't deauthorize it, but that is not a problem.

RAC on windows 2000 with domain controller

Guys,
I need advise on the following implementation.
We have 2 IBM Xseries 365 Servers , 1 FastT600 Storage Windows 2000 Advanced Server, Oracle 9i, Oracle RAC
We have plan of integrating 2 servers in Windows 2000 Cluster, one server would act as Domain Controller and second will act as Additional Domain Controller in the MS Cluster. We would be installing Oracle 9i Enterprise s/w on each one of these server's internal disks and datafiles on shared storage ( FastT600 ).. We would need to install Oracle RAC as well. As per Oracle recommandation, the cluster nodes shouldn't act as Domain controller. We didn't find any logical and techinical answer for this recommandation. Can anyone guide me as why is it so? and any issue may arise if we don't have separate doamin controller?
Is it really required to have separate Domain controller ?
Early replies would be appretiated..
Thanks & Regards,
Sam

Hello hanspjacobsen,
1. According to the subjects System Requrements - Windows 2008 R2 Domain Controllers do support
Windows 8.1/2012 R2 admx deployment with some limitations regarding down-level server version of course. So yes - you can download and use it. Doubtfully the GPO presence in AD could
harm Exchange in any way.
2. With the course of updates for Exchange 2010 and Windows Server - I'm pretty sure we can expect Exchange 2010 supporting W2012 R2 DCs with close upcoming updates. So the full interoperability for those two is just a matter of little time.
▲ Vote if Helpful / Mark if Answer
MCSE: Messaging 2013 Charter / Private Cloud / Server Infrastructure
MaximumExchange.ru

Cant install software from disk. Terminal window opens with a logon and bash message?

I cannot install software from disk & in some cases download.
If any software disk is inserted the terminal window appears.
The Disk has to be clicked to open the contents but install files or package files show as a blank doc and not the usual yellow package icon.
All that shows is a log on message in the terminal window, but nothing about install.
I thought Drive issues but the drive plays audio and DVD perfect
I cannot install:-
Office for mac updates
Live Interior 3D (managed to install from download)
ION Audio Converter
This has only come to my attention in the last couple of weeks.
The machine is a late 2011 with Lion installed

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Playing and/or converting purchased music from iTunes Store (in Windows).

I just purchased some music from the iTunes Store and now it's telling me it's protected and it won't play in anything other than iTunes. If I bought the music, shouldn't I be able to do with it what I will? I need to use it for a DVD I'm making with Windows Movie Maker and it won't allow me. HELP!

Tracks purchased from any legal download store carrying major-label content, including the iTunes Music Store, are copy-protected and so cannot be directly converted to any other format. You can, however, burn the tracks purchased from the iTunes Music Store out to an audio CD, at which point it will act just like any other normal audio CD.

Problems with RDP/RDC from Mac OSX to Windows Server 2008 on External IP

We have a customer that is using Mac and Microsoft's RDC for Mac to their servers.
They've just upgraded from Windows Server 2003 to 2008 and can't connect through RDP to their TS server on external IP.
Their servers is not in any domain and it work for them to connect to another Windows Server 2008 that is located in their office when they use internal IP.
The problem is that when using RDC to the external IP they get bellow:
"Remote Desktop cannot verify the identity of the computer you want to connect to. This problem can occur if:
The remote computer is running a version of Windows that is earlier than Windows Vista.
The remote computer is configured to support only the RDP security layer.
Contact your network administrator or the owner of the remote computer for assistance."
From here they can choose "Connect" as they did on the Server 2003 but now they get: "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.Try reconnecting to the Windows-based computer, or contact our administrator."
and is only able to choose "Ok".
I've changed the settings on the "configuration for host server for remote desktop sessions" under General from "RDP-Security Layer" to "Negotiate" and in this case I get a logon windows where i type in all my information click logon. Here I get another
error message which says something like: (We get it in Swedish). "Connection to the windows-based computer broke since there was a problem associated with the licensificationprotocol... Try to connect again" Where I can choose "Cansel" or "reconect"
but it just keeps poping up if i chose reconnect.
I've tried all settings in the TS server and there is not much to change on the RDP client. We have installed the server certificate on the Mac client but it didn't help.
We've also tried with CoRD and it works fine as RDP from a normal Windows based computer.
The only solution I've found on google is to use CoRD instead but we got problems with that connection since it keep crasching on our computer.
In my eyes the problem is on the security requirements that the RDC for Mac needs but I can't find any inforamtion on MS sites about it.
Greatfull for all tips and trix!

I too was having the problem same as everyone else. However, for me the problem all started when I replaced my SSL certificate that was used/selected in the Remote Desktop Session Host Configuration utility, connections, RDP-TCP Properties. The security
layer is negotiate and the certificate is the one selected on that screen. It was not licensing related.
The certificate had expired and I didn't believe I needed it. But turns out I did, so I had to generate and validate a new one using GoDaddy (though they specifically were not part of the problem). As my Terminal Servers (Remote desktop servers)
do not have IIS installed, I was a bit stumped on how to create a new certificate request. I finally found some instructions on how to create a certificate request using the MMC snap-in, advanced operations, create custom request. The template
chosen was "legacy key", and without boring the rest of the details that part was the root cause of my problem. The legacy key was not able to be processed correctly by the Mac RDC client. Neither the official 2.1.1 client or the 2.1.2 download.
The Terminal Server system event log was showing the following two errors, 36874 and 36888. The first one contained the best details and said: "An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites
supported by the client application are supported by the server. The SSL connection request has failed." Upon searching the internet for that, I found this page which described the legacy key problem:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/3a2d2eec-000d-432a-abd7-6b965268c671
So, my solution most familiar to me was to use IIS and create the SSL certificate request, process that with my 3rd party CA, export the certificate with private key and then import that certificate into all of my terminal servers. Then using the session
host configuration tool, pick the new certificate and the problem was now solved.

Problem with recovering data from Bit Locker enabled hard disk with bad sectors

Hi,
I have Lenovo T430 laptop with Windows 7 and Bit Locker enabled hard disk. While working I encountered blue screen error multiple times. After some time, the laptop stopped to boot by itself and started showing error 'A disk read write error has occurred.
Press Ctrl+Alt+Del to restart' message. I tried to connect the hard disk to a different PC as a secondary drive and tried to check the disk to recover the data. The 500 GB disk is showing as unallocated space and I am not sure how to recover the
data from the hard disk. Appreciate your help to recover the data from corrupted hard disk.
I used the Lenovo Diagnostics tools available in BIOS and it showed 48 bad sector errors on the hard disk. I also used Windows 7 CD and tried auto repair but it looks like it didn't do anything.
Thanks in advance!

Hi SenneVL,
Since there are 48 bad sectors on your hard disk, this means the system can not boot any more, the data might not be restored in a normal way, you'd better turn to data restore company for help.
Regards
Wade Liu
TechNet Community Support

Playing ipod configured with 7.4 from XP platform on Windows 2000 with 7.3

Similar Messages

Maybe you are looking for