Playing movies in sequence?

Is it possible to create "playlists" similar to iTunes in QT so that QT will play a lists of movies in sequential order, i.e.; dragging a file into QT and having it play all the movies in that file? How can I control the play back: Skip to next movie, etc...?
Thanks,
Rosebud828

Thanks for the info,
I'll try Xine and NICE players. I like VLC but it doesn't play all WMV files (even with Flip4Mac). Anyone tried the Automator? I've used it with varing success to create a "workflow" and send movie files to Quicktime. However, the files seem to play out of sequence and I'm not sure how to correct the problem...

Similar Messages

Possible to play Movie in Logic without the sequence playing too?

In Digital Performer, you can un-lock (un-sync) the Movie window so that you can click on its Quicktime Play button and play it independently from the sequence. This way you can experiment with different start times for the music for other parts of the film you're working on. It looks like this is not possible in Logic 8. The Movie window is ALWAYS playing when the sequence is playing, and you cannot play the Movie by itself just to watch it alone. Is there a way around this?

O.K.
Before you go ahead I would suggest you make a copy of your iDVD application as a backup just in case anything goes wrong. Also make sure it's not running.
Next right-click on the iDVD app and choose "Show Package Contents" - it will open just like a folder.
The theme resides in this location:
iDVD/Contents/Resources/20TransparentBlack.theme
The theme files are packages just as the application itself so right-click it and go to:
20TransparentBlack.theme/Contents/Resources/MenuBackground.pox/Contents/Material/
Inside there's a TIFF file
CB7F3266-25EA-11D8-9A70-000393AE67F4.tif
That's the one that needs to be edited; open it in PS Elements.
The next step requires you to access the image's alpha channel, not sure if that's possible in Elements but here it goes.
The alpha channel should look greyish, that's because it half-transparent. Select all (Apple-A) and fill the channel with pure black, that will make it totally transparent so it won't show anymore.
Save the file, close it and also close all open iDVD folders.
Start iDVD by double-clicking - the theme should now appear without the black band.
One word of caution: I only applied this modification very recently and haven't used the theme yet to actually burn a DVD so you might want to keep a copy of the original in a safe location.
Cheers Martin
PS: here are some tutorials on customizing iDVD 3 although I think the principles still apply to iDVD 4:
http://www.creativemac.com/articles/viewarticle.jsp?id=16349-0

Anyone get Play Movies to Loop a sequence more than twice?

Has anyone got Play Movies to loop more than once (show twice) using a folder of movies inputted via Get Specified Finder Items. It seems like a bug as it resets the loop number to 1 when saved or show action is selected. I doubt that the number field is passed or saved as a variable.
If it is a bug, I really need some sort of workaround if anyone can suggest one? My intent is to use an iMac as a self running theater for student film projects--to turn on in the morning, play movies all day long, then turn off at night.
Thanks

I am having a similar problem with iTunes 11 on a Windows 7 box. I was able to rent and play HD movies befor "upgrading" to iTunes 11, however now when I try and rent a movie in HD I get the error: "This cannot be played in HD on this computer. You must rent and watch the HD version on an HD-compatible device. Or, you can rent the SD version and watch it on this computer."
Guess i'll be renting movies from XBox from now on.

Play MC full sequence

How can I make my MC play its full sequence in frame 1 of the
main timeline? at the moment I have to adjust the layer in the main
time line to the same time as in the MC or it will only play the
first frame.
Also - my flash presentation is made up of several swf files
- but the at moment they play the whole sequence and then loop to
the beginning again - how can I make it stop when the last swf has
been played?
Any advice would be great.

dazzlah wrote:
> How can I make my MC play its full sequence in frame 1
of the main timeline? at
> the moment I have to adjust the layer in the main time
line to the same time as
> in the MC or it will only play the first frame.
As soon as there is a blank frame or no frame after that MC,
any content on previous
frame of the same layer will be discontinued. You need to
hold the timeline till the
movie clip stop playing or give it enough frame to run along
the timeline.
> Also - my flash presentation is made up of several swf
files - but the at
> moment they play the whole sequence and then loop to the
beginning again - how
> can I make it stop when the last swf has been played?
Place a stop action on the last frame of the last SWF.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Quicktime Player play mov issue

Hi
Why Quicktime Player play mov have wave line?and MPlayer play is look fine.

a very old version of Final Cut, Final Cut Express HD 3.0 ... I bought a Nikon D3100 DSLR
The Nikon D3100 records video as H.264/MPEG-4 AVC. This is not usable in FCE. You will need to convert the video to QuickTime/Apple Intermediate Codec in order to edit the video in FCE. Try using MPEG Streamclip to convert the video clips from your D3100. Also, before importing the converted clips into FCE, select one of the FCE Easy Setups that matches how you shot your video ... 1920x1080i60 for example ... create a new sequence and then import the converted clips.
That said, I think you may still run into some issues with such an old version of FCE. FCE 3.0 only supported DV and HDV video, neither of which exactly matches what your D3100 can do. You will be better off upgrading to Final Cut Pro X, the current version of Final Cut.

Subtitles are not getting displayed while playing movies

Hi,
Recently I have upgraded with Max OS X 10.6 Snow Leopard. After this upgrade whenever I play movies in my VLC player, I am getting a message as "freetype: failed to load font file /System/Library/Fonts/LucidaGrande.dfont" and then the subtitles are not displayed.
Can someone advise how to resolve it? I tried to download LucidaGrande.dfont from internet. But I couldnt find one. Please help.
Thanks.
Ravi

Hello, Ravi & welcome to the forums.
Lucida Grande is included with Mac OS X.
Check and validate all of your fonts with Apple's Font Book (look in the Applications folder). Search for Lucida Grande to be sure it was properly installed. Find and remove duplicates as well.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
Finally, be sure all the apps you are using are compatible with SnowLeopard. Check with their authors for updates.

Unable to play some movie from Netflix on my iPad. When I click on a movie an error message comes up which says "cannot play movie. Please try again". Can anyone assist me? I just upgraded to iOS 7.1. Netflix not able to find problem.

Unable to play some movies from Netflix on my iPad. When I click on a movie an error message comes up "Cannot play movie. Please try again later." I contacted Netflix but have not been able the help so I am wondering if it's my iPad. I didn't have a problem before but I have recently upgraded to iOS 7.1. Also is a certain amount of storage needed to play a movie? About how much is that?

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

Randomly Apple TV can't play Movies/Tv shows and music.

I've seen other people having problems with this issue but with all my searching, have not found an answer and thought I'd share my experience in case someone has a solution or suggestion.
Our cable modem service comes into an access pannel in the bedroom closet. It goes to the Linksys WRT54G router, then to a hub which sends out to all the rooms in our house. Our house is new and pre-wired for ethernet in each room. It comes in the office, goes into another hub and then to the Mac Mini I have and to a NAS Lacie storage drive where all my movies, music and photos are at. We stream everything and only synk photos on the Apple TV.
Over the last couple of days, the Apple TV can't play movies or music for some reason. The errors I get with Movies/TV is "The selected video cannot be played." The format was not recognized. With music the message is "Apple TV cannot play the current song." I know all the movies and music work because a day before I just played I AM LEGEND and it worked perfectly.
I've got a couple of theories and wanted to float them by everyone. I use a Harmony 880 remote and when I select Apple TV, it turns on the ATV and then sets the inputs on the other items. When I'm done and select watch TV, it turns ATV off. Should the ATV stay on all the time? Could this be causing the problem?
I've restarted the ATV, the Mac Mini, the hubs, the cable modem, the router. Nothing brings it back. But if it sits for a while, a couple hours or so, then it's back. However, it just stops playing for no reason and the next day it might not work again.
I'm running iTunes 7.6.2 and I checked the ATV and iTunes and both say they are up to date on their software.
I could really use some help here. The frustrating part is the kids want to watch one of their movies for the 700th time and it won't play many time.
Thanks everyone.
John
I use a Harmony 880 (I believe) remote.

Oops----thinking of the light on the Airport!!! =-)
The status light is gray, so it is not setting off any "alarms", everything else is working, but when I go to watch a movie, rented or owned, it times out and resets itself. I ran a diagnostic and it said everything was working properly, I reset to factory settings and still had the same problem, and even reset the Airport to make sure it was not just the connection.
At a complete loss as to any other ideas to try to get her up and running again. No way am I going anywhere near an Apple Store with all the iPad hype that is out right now!!!!!!

Can I move only my iTunes movies, not my iTunes music, onto a flash drive? And, is there a program (apart from iTunes) that can play movies on MacBook Air?

I have a MacBook Air and I need to free up space...
1) I have three series of a tv show on my itunes which are taking up loads of memory - see image - I want to move these movie files onto a Flash Drive. However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
2) I have managed to copy the movie files onto the flash drive, however when I tried to play one to check that they were loaded properly it didn't have a program that could run the file (they have copied over in a m4V format). Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
Thank you so much for any answers posted.
Best,
Eloise15.

1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps!

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

How do I play movies on time capsule via apple tv?

i'd like to play movies saved on time capsule (plus external disks connected to time capsule) on apple tv.
can I do it bypassing my mac or the only way is to read it using itunes?
thanks

Welcome to the Apple Community.
All content must be played through iTunes.

HT204382 what software do i need to play movies on avi file . have connected a external memory disk and all the movies are in avi format.

What software do i need to install in order to be able
to play movies in .avi format.
have connected an external memory and all the entertainment
files are in .avi format.
Ansver i get : does not support

VLC is a good choice. While I don't know if it will play your files, Perian is a helper app for Quicktime which allows you to play a lot of things in the Quicktime Player.
There is also Flip4Mac which allows you to play windows media files in Quicktime.
Finally, note that the extension on a video file doesn't really tell you what you need to play it. The .avi, .mpg, etc. is only the wrapper around the actual video. The video is encoded by some means and needs to be decoded. The video inside the .avi can be encoded in one of many different schemes.
VLC, Perian, Flip4Mac, and many others, are all able to decode various flavors of encoding. Having all of those in your toolbox will help to allow you to play most of the things you'll find.

Is there a way to play movies that require flashplayer on a ipad2

is there a way to play movies that require flashplayer on a ipad2

Take a look at the "More Like This" to the right. That question has been asked and answered many times in the past.
Short answer: try alternate browsers like Skyfire or Puffin.

MacBook Pro won't play .mov or .wmv files.

Since "upgrading" to Lion my MacBook Pro won't play .mov or .wmv files, all I get is a black screen and the audio. It's so frustrating!!
I've read many other posts all along the same lines and wherever possible I've tried to follow the advice which has been given but nothing works.    I've updated all the drivers I can and I've even reinstalled Lion, nothing makes a difference.
I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update.
I had no problems when running Snow Leopard and it would seem, looking at everyone else's problems, that the common issue is Lion.   Seriously, this is one area where Lion is a backwards step.   It should just work (like most things from Apple), but it doesn't.
Personally I believe there is a problem with Lion but from what I've found out from speaking to friends with other Apple kit, this might be a random issue only affecting some people as some have said they've had no problems while others have had the same issues as me.    One guy reinstalled Lion and it resolved the issue for him, I've not been as lucky.
As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!

I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update... As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!
This is a peer-to-peer user forum. Perhaps you would see more action if you and others would file a formal "Bug" report with Apple QuickTime technical people rather than repeatedly reporting a possible problematic problem which may or may not affect others on a random basis. QUICKTIME PRODUCT FEEDBACK
Since you aren't seeking further advice here is what I have observed. Not being a regular WMV file user, I had to create my own sample file to test—a WMV 9 file containing WMV3 compressed video and WMA2 compressed audio. Since I normally use QT 7 as my primary media player, I also stored the WMV data in its partially decompressed form in an MOV file container to avoid pre-playback delays in "classic" player routines and also provide a secondary playback test of MOV wrapped content. These files play as follows using the Flip4Mac component/player support and uncoded URL uploads:
QT 7.6.6 "Open File" - both files play correctly.
QT 7.6.6 "Open URL" - both files play correctly.
QT X.1 "Open File" - WMV file plays correctly. MOV file plays video without audio.
QT X.1 "Open Location" - WMV file appears to open but plays with "black" screen and no audio. MOV file plays video without audio.
VLC "Open File" - WMV plays correctly. MOV file doesn't open,
VLC "Open URL" - WMV file plays correctly. MOV file appears to open but nothing plays.
MPEG Streamclip "Open File" - both files play correctly.
MPEG Streamclip "Open URL" - both files play correctly.
GarageBand - WMV file will not import but MOV file does.
iTunes - WMV file will not import. MOV file container is accepted but as soon as iTuness sees the compression formats, it aborts import.
Safari - WMV file URL auto-downloads and playes in the QT X.1 Player. The MOV file URL opens and plays in Safari.
As you can see from these results the files do play but are subject to many different constrints based on old/new video technology support, independent QT subsets and/or container trapping constraints. In short, individual user results will depend on presence/absence of component support, actual compression formats, file container, application being used, and how the application is being used. Unfortunately, most users here can't or won't provide the prerequisite information or a sample file for independent examination. This makes it next to impossible to give advice in these matters or categorize the specific nature of the problem.
SAMPLE WMV FILE
SAMPLE MOV FILE

Can no longer play Google Play Movies on tv

Prior to the 4.4.2 update to the Xperia Z tablet, I had no issues connecting and viewing Google Play Movies on my tv, using the MHL adapter. Now, it gives me an error: Premium content can't be played on this screen because it is not secure. Does anyone else have this issue?

This sounds like a change to their DRM files, this limitation is quite common with this sort of content so is unlikely to be altered back sorry.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Playing movies in sequence?

Similar Messages

Maybe you are looking for