Playing mp3s in order I want

I have yet to figure out how to load and play mp3s in the order I want. I can change the playlist but when I connect to load my shuffle the songs appear the way shuffle wants them.Can anyone help? Thanks

That's right - and ignorance of this factoid can drive you crazy with your shuffle. Once that "number" column is selected as the sort order you can drag stuff to whatever play order you want. <sigh> It's a good feeling.

Similar Messages

In IPhoto I have edited the order of my images. When I play the album on Apple TV the order reverts back to the time stamp. Any suggestions on how to get the images to play on my TV in the order I want?

Apple TV won't play back my album images from IPhoto in the edited order I want. The order seems to revert back to the time stamp for the photos. I have combined the photos from 3 different cameras and they had slightly different clock settings. I am working on an edited presentation of about 1500 Pics from travels in Turkey this summer and sometimes the order makes more sense if I move some of the images quite a ways. Is there any solution short of changing the time stamp on every single image?

Using the 'adjust date and time' setting is the best way to syncronise the photos from all your cameras. However as you say this merely puts them all in the correct order chronologically.
If there are photos that you feel would be best somewhere else in an album other than in date order, it may depend on how many as to which is the best option for you. If it's only a few you may wish to adjust the date/time on these few manually so they fit in with the rest where you want them.
If you have a lot of photos you want in a different order to the order by date, or you really don't care about what date/time is used and just want them in the order you want them in, then 'batch change' is the best option.
From the view menu, select 'sort photos - manually', drag the photos around until they are in the order you want, select all of them. Now select the batch change option and choose 'Date' from the 'set' options, type in a date and time for the first photo, it can be anything but it's probably a good idea to choose something close to the original date, then check the box 'Add'. You can keep the value set at 1 minute or enter any value you want, it may be more realistic to divide the length of your holiday by the number of photos you have to calculate a value, but it really isn't necessary. Clicking OK will adjust all the dates without affecting the title or description and the photos will now show on the Apple TV in that order.
Just to be sure iTunes is updated, you may want to go to the advanced menu/choose photos to share in iTunes and deselect the album, apply, reselect the album and apply again.

Just updated itunes on a new mac - doesn't want to play mp3s?

Hi everyone, I just picked up a newish g4 tower and am having trouble with itunes.
the os is 10.4.11 and I did the itunes update.
I tried to download a couple songs but mp3's won't register in the library window. I downloaded 2 m4a files and they both play.
does itunes no longer play mp3's?
Or are all the files I download trash? I'm using limewire and have never had this problem with the old itunes. should I switch to a different fileshare service?
I'm afraid to try to transfer my mp3 library from my old g4!
much thanks to anyone with advice! -CM

Hello and Welcome to Apple Discussions ...
Post in the iTunes Forum for more exposure to your post. The iTunes pros hang out there:
http://discussions.apple.com/forum.jspa?forumID=789
Carolyn

I want to play mp3 from usb flash disk . what adapter do i use?

i need to play mp3 on ipad using flash disk or sd card . how can i du that?

You cannot ,not supported ,load the mp3 on to iPad via iTunes on a PC or Mac

When i burn a playlist, why does it automatically alphabetize my list? how do i kburn it in the order i want?

when i burn a playlist, why does it automatically alphabetize my list? how do i kburn it in the order i want?

What format disc? MP3? Audio?
iTunes 10 for Mac: Create your own MP3 CDs - http://support.apple.com/kb/PH1748
iTunes 10 for Mac: Disc burning overview - http://support.apple.com/kb/PH1746
iTunes: How to set the play order of songs on an MP3 CD - http://support.apple.com/kb/HT2455

[SOLVED] unable to play mp3 or flac files in mpd, .dts files play fine

I had a perfect running mpd setup before I tried to fiddle around with some dependancies to get xbmc-svn to compile without errors. I installed some AUR packages (ffmpeg-svn, x264-git, libva-sds, libvpx, libid3tag).
After that I started to experience trouble with mpd, it start fine and says it plays audio files just fine but whenever i play a mp3 or flac file the progress bar just looks like it's playing the file but I hear no sound. Whenever I play a .dts file i hear the sound correct.
I'm very curious to why this happends.
I rolled back the packages mentioned above but the issue remains unsolved.
My setup: pc is connected to receiver by hdmi cable using the latest alsa version with digital passthrough over hdmi, currently using mpd-git from AUR
mpd -v --no-daemon shows the following:
# mpd -v --no-daemon /etc/mpd.conf
config: loading file /etc/mpd.conf
listen: binding to address for 192.168.1.3
listen: binding to socket address 192.168.1.3:6600
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: writing pid file
snippet from mpd.log:
Jun 28 00:54 : client: [0] process command "playlistfind filename "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "addid "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : add to playlist: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : database: get song: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "playid "7""
Jun 28 00:54 : playlist: play 7:"Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3"
Jun 28 00:54 : decoder_thread: clearing mixramp tags
Jun 28 00:54 : decoder_control: mixramp_start = NULL
Jun 28 00:54 : decoder_control: mixramp_prev_end = NULL
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "status"
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "idle"
Jun 28 00:54 : client: [0] command returned 1
Jun 28 00:54 : client: [0] process command "playlistid "7""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : mad: detected LAME version 3.97 ("LAME3.97 ")
Jun 28 00:54 : mad: LAME peak found: 0.000000
Jun 28 00:54 : mad: LAME track gain found: -5.000000
Jun 28 00:54 : mad: encoder delay is 576, encoder padding is 1818
Jun 28 00:54 : decoder: audio_format=44100:24:2, seekable=true
Jun 28 00:54 : alsa: default period_time = buffer_time/4 = 185759/4 = 46439
Jun 28 00:54 : client: [0] process command "plchangesposid "2""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : alsa: buffer_size=8192 period_size=2048
Jun 28 00:54 : output: opened plugin=alsa name="My ALSA Device" audio_format=44100:32:2
Jun 28 00:54 : output: converting from 44100:24:2
Jun 28 00:54 : Failed to open mixer for 'My ALSA Device': no such mixer control: PCM
mpd.conf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/media/media9/Muziek/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "192.168.1.3"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "verbose"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# #music_directory "path_to_your_music_collection"
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured #music_directory "path_to_your_music_collection"
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured #music_directory "path_to_your_music_collection"
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,3" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "Master" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
Whenever I run xbmc using the hdmi digital output it just plays mp3 and flac files without problems.
Anyone any clues on how to solve this issue?
TIA, dafart
Since
Last edited by dafart (2010-07-01 00:38:09)

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Which correspondents fine with the
device "hw:0,3"
in my mpd.conf alsa section.
Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
hokasch:
I tried changing the mixer to "Master" but that did not change much.

SWF to play mp3 files located on the server

Hello,
Does anyone know if it is possible to create an SWF file that can play mp3 files directly from the server, without the need for a streaming media server or external JS.
And also for the application to read the current directory its located in and build a playlist based on the files inside.
any information of examples would be greatly appreciated.
Peter.

As for loading and playing the files there is no issue. Simply load them as you would load any file. You can even use a relative path if they are in the same folder as the SWF, or a sub-folder that is in the folder with the SWF.
As for looking at the server directory for what files are there, and using them - I know of no way to do this. That doesn't mean it is impossible, just that I haven't come across a method in my experience.
What I typically do is to archive the list of files in an XML file, and load the XML. I know, that adds an extra step, and an extra file, but it is the easiest method for approximating what you want to do.
Let me edit this response.
You could use javascript, or a server language to grab the list of files in the directory and pass it into Flash via the ExternalInterface classes.

Audiobooks not playing in proper order

I have an iPod Classic, 80GB, on up to date software (v 1.1.2, according to iTunes, which is on v 12.1.0.50). I have several audiobooks, some of which were loaded into iTunes from CDs rather than being downloaded from the iTunes Store. The iPod apparently syncs properly with the iMac, which is on Yosemite 10.10.2. (I don't think the issue is anything to do with the OS, since it was evident on the last two OSes as well.
The issue is that on the iPod under the Audiobooks menu the books are displayed and play in alphabetical order of the names of the tracks, not in the book order. Some of the track names are 'Track 1, Track 2', etc. This makes for interesting variety, but it's difficult to follow the plot!
I have tried resyncing after changing the sort order in iTunes, but nothing seems to make any difference. I have worked around the issue by creating playlists and merging tracks, but this is less than satisfactory.
Am I doing something wrong or is the iPod faulty? Thanks for any help offered.

Unchecked tracks are skipped during normal track to track playback and are usually excluded from syncing to devices. I use them for things like bonus interview tracks which I will keep in my library but don't want to play accidentally when listening to the album. There is a preference to hide the checkboxes if you don't have a use for them.
tt2

Need help: playing songs in order, strangewindow message, upgrading I-Tunes

I have 2 situations I hope someone can help me with:
1: PLAYING SONGS IN ORDER; WINDOW MESSAGE
I have CDs of music that when I load them onto my pc laptop the song names don’t come up—each song lists as “track 01” “track 02” etc.
When I try to play the album thru I-Tunes on my laptop, the songs won’t play in order. i.e. ALL the “track 02”s will play before going to “track 03,” then ALL the “track 03”s will play, etc. So I made a playlist of each CD.
Now when I try to play the Playlist, I get a window message that says, “The song “Track 01” could not be used because the original file could not be found. Would you like to locate it?” I can choose ‘yes’ or ‘cancel.’ YES takes me to folder selections. I find the song and click on it and then it plays.
There must be an easier way. I don’t want to search for each song one at a time in order to play an entire CD in order.
2: UPGRADE
I need to upgrade. I have I-TUNES 7.0.2. I went online to apple.com and couldn’t find any upgrade option, so I clicked on “download I-tunes”. I got a window that says “download complete.” But how do I tell if it’s really installed? Where do I go on my computer to see what version number it shows?
Any help is appreciated,
Carolyn in Las Vegas

2. Help->About iTunes
1. You have done something that has confused iTunes about the location of the files in its library. Without knowing what happened, it's hard to make a specific recommendation, but if you moved your files around manually, move them back, and then, if you want to change the location, do it only by setting it in iTunes preferences and then using Consolidate Library.

Please help.. error playing mp3 files in Sony Erricsson SDK 2.2.4

i installed Sony Ericsson SDK 2.2.4 and also installed the software requirements like:
SPOT xde Player,
the script: WindowsXP-Windows2000-Script56-KB917344-x86-enu.exe,
and directx 9.0
i have jdk version 1.5.0
but when i try to run the application named "mmademo", and select the Midlet named "Simle Player", and then select "SEMC mp3 test", it throws this exception "mediaexception: start ".
if it is important the directory of this application is this: C:\SonyEricsson\JavaME_SDK_CLDC\PC_Emulation\WTK2\apps\mmademo
by the way normally the emulator of Sony Ericsson K750 supports mp3 playing on mmapi..
it works fine when i select some other applications like "Simple Ring Tone" playing..
And when i quit the emulator, console screen displays this(even if i run the applications that work correctly):
Execution completed.
0 bytecodes executed
0 thread switches
801 classes in the system (including system classes)
0 dynamic objects allocated (0 bytes)
0 garbage collections (0 bytes collected)
please give some idea.. its too important to me

it is the example code of the Sony Ericsson SDK, i did not write it, plus it works on my desktop computer but i need it to work on my notebook.. it gives the that result(which i explained above) on my notebook computer.. and i cant understand why would a SDK malfunctions (at playing mp3) on my notbook, and runs ok on my desktop, though my desktop is too much older and slower..
can that have something to do with my language properties? because in order to use netbeans i switched the language to english(usa), which was not the original language of my operating system.. i installed the Sony Ericsson SDK after switching to english(usa).
thanx..

Is it possible to play mp3 without using JMF or JLayer??

hi,
i wan to play mp3 without using JMF or JLayer as just like .wav file.
If it is possible then anyone plz tell me how it can b done..please..
thnx.
Edited by: samratsinghal on Sep 11, 2009 10:21 AM

JavaSound does not have the functionality to play MP3 files.
That said, if you want to do it without using a library to decode the MP3 file for you, then you need to write your own MP3 decoder.

Is it possible to have podcasts being played in chronological order instead of reversed chronological order in an iPod Classic?

Is it possible to have podcasts being played in chronological order instead of reversed chronological order in an iPod Classic? It is not an issue, just something that irritates me as I want to be able to listen to them in chronological order.

Yes, but you need to make a custom playlist to do so. There is no option on the classic to reverse the playback order.
tt2

Cannot play MP3 files in Dreamweaver CS4

Hi
Apogogies if this has been asked before.
I have an embedded MP3 file on one of my DWCS4 pages but when I try to play it from the Properties Inspector I get the message "Unable to find the plugin that handles this media type".
The sound file plays OK in Firefox and IE but I would like to be able to test it in DW. I have the currrent version of Apple QuickTime Pro installed.
I am using both Windows XP and Vista with the same problem.
Is there a plug I can download for DW only in order to play these files without resorting to converting the MP3 to another format.
Any help would be much appreicated.
Thanks
George

Yes but I did exactly what I accused you of doing so it was really bad!
Software troubles can drive you a bit crazy. Sorry again.
From: pziecina <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 08 Oct 2009 09:16:11 -0600
To: d maass <[email protected]>
Subject: Cannot play MP3 files in Dreamweaver CS4
Hi
Thank you for the apology, but as we have all (probably), misread and
therefore wrongly replied to posts, it is not really necessary.
PZ

I want to make a CD that is NOT in alphabetical order, not in artist alphabetical order and not in album alphabetical order... I want to make it the order I want. Can this be done? How? thanks in advance for all your help. Mona

I want to make a CD that is NOT in alphabetical order, not in artist alphabetical order and not in album alphabetical order... I want to make it the order I want. Can this be done? How? thanks in advance for all your help. Mona

cjam732 wrote:
Ed - by sequence of numbers, are you talking about the rectangle with the arrow that sorts by track number? I've tried to follow your directions to Mona but my playlist still gets burned to CD in alpha order. driving me crazy. any other suggestions? thanks, Chris
Chris, The sequence number is the first column of numbers, to the left of the Name column. It always goes 1, 2,3 etc. It is not the same as the Track Number, which has its own column.
As a precaution before burning, make sure that Shuffle is tunred off, and that you right-click the playlist name and choose 'Copy to Play Order" (although technically they should not affect the burn).

Creative MuVo N2000 doesn't play MP3 files anymore?! HE

Hi everyone,
I hope someone can help me out. Here's the problem.
My MuVo N200 player doesn't play mp3 files anymore.. there's only a strange noise comming from the player if i attempt to play mp3's...he only plays the wma files?! I gave my player to my flatmate so she could here music on her vacation to the US, and that's when the problem started. I never had this problem before, and i wonder if she acidently pushed a buttom she shouldn't. I can't figure out how to fix it. Anyone has a clue what has happend, or if the player is "lost" :-( ?! PS: The player is brand new.
Help is appriciated
Thx Lizzy ;-)Message Edited by lizzard on 08-23-2005 03:45 AM

Unfortunately, NONE of my friends use Windows anymore , even at work we use Linux for security reasons. So what am i supposed to do now... They have a link at Creative that makes you belei've that they support Linux and offer you the possibility to choose the operating system, in other words=Linux. When i told in a mail to Creative Norway that they offer Linux support at their download-site, they actualy had the nerve to tell me that they don't do that!! I told them to remove the choice if they don't offer it, and don't try to tell people that they are eighter blind or stupid, and i pasted the Link + added a Screenshot of the page into the mail!! I realy got upset. It is the last time i by something from Creative. My first player from Creative lasted exactly 2 weeks, after that he stopped working for one odd reason, so i paid a little more in order to get a better one in exchange, and that device didn't li've longer than month eighter?
Not exactly QUALITY we are talking about..aren't we?
What to do, what to do?
Anyone has a clue?

Playing mp3s in order I want

Similar Messages

Maybe you are looking for