Playing music & using non-communication functions with international travel

I'd like to be able to play music and access my contact list on my iPhone while traveling internationally, while temporarily disabling the phone, voice mail, and all incoming and outgoing communications. The roaming fees are just too high while out of the U.S.A.
But does this mean sacrificing being able to use the iPhone's music, contact list, and other functions that don't require a satellite signal? Right now, I'm just turning off the phone when out of the country, for fear of excess charges with receiving voice mails and internet data transfers. It seems like a waste that I can't even turn the phone on to listen to music when I'm traveling.

It does not. Simply activate Airplane mode. This will disable the cellular antenna only (you can even reactivate WiFi). Deactivating the cell antenna will prevent all phone calls, text messages and EDGE/3G data usage.
All functionality that does not require cell service will remain active.
Message was edited by: Ansuz82

Similar Messages

Can't use voice/video functionality with external domain connected users through federation

Hello All,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way to resolve the issue.
Thanks, MK

Thanks for your reply.<o:p></o:p>
Audio/Video works fine within corporate when dial any lync contact. We only have issue while trying to use the same functionality with any other
external lync contact configured over federation option.<o:p></o:p>
We already checked the security rules and all required ports are open, as confirmed by local resolver group.<o:p></o:p>
We have checked with external parties and according to them their systems are hosted by Microsoft as part of office 365 suite and they already have
federation option for 17 different customers which works fine. Which means issue must be your local end.<o:p></o:p>
Is there any tool available to identify the issue from client end?<o:p></o:p>
Also I have a question here....In my corporate environment...client is sitting in India and lync servers are hosted in UK and users connect to it
over MPLS route. In Client lync configuration we have internal/external servers configured .....so when i tried to make a voice call with external lync users then I see from netstat -a command that traffic hitting to multiple public IP addresses
directly from my machine..<o:p></o:p>
Does it mean that client required internet connectivity with specific open media ports to connect with external parties for video/voice? or in ideal
case all request should handle by corporate internal server which should took UK internet path to connect with external lync contact?
Thanks, MK

Using Non-destructive filter with Nested XML data

Hi,
How do you use Non-destructive filter with Nested XML data?
I am using the non-destructive filter sample with my own xml which is setup to search for the <smc></smcs> in my xml below. But when i test it it only searches the last row of the "smc". How can i make it work so it can search for repeating nodes? or does it have something to with how my xml is setup?
    <ja>
        <url>www.sample.com</url>
        <jrole>Jobrole goes here</jrole>
        <prole>Process role goes here...</prole>
        <role>description...</role>
        <prole>Process role goes here...</prole>
        <role>description....</role>
        <prole>Process role goes here...</prole>
        <role>description...</role>
        <sjc>6K8C</sjc>
        <sjc>6B1B</sjc>
        <sjc>6B1F</sjc>
        <sjc>6B1D</sjc>
        <smc>6C9</smc>
        <smc>675</smc>
        <smc>62R</smc>
        <smc>62P</smc>
        <smc>602</smc>
        <smc>622</smc>
        <smc>642</smc>
        <smc>65F</smc>
        <smc>65J</smc>
        <smc>65L</smc>
        <smc>623</smc>
        <smc>625</smc>
        <smc>624</smc>
        <smc>622</smc>
        <audience>Target audience goes here....</audience>
    </ja>
here is the javascript that runs it.
function FilterData()
    var tf = document.getElementById("filterTF");
    if (!tf.value)
        // If the text field is empty, remove any filter
        // that is set on the data set.
        ds1.filter(null);
        return;
    // Set a filter on the data set that matches any row
    // that begins with the string in the text field.
    var regExpStr = tf.value;
if (!document.getElementById("containsCB").checked)
        regExpStr = "^" + regExpStr;
    var regExp = new RegExp(regExpStr, "i");
    var filterFunc = function(ds, row, rowNumber)
        var str = row["smc"];
        if (str && str.search(regExp) != -1)
        return row;
        return null;
    ds1.filter(filterFunc);
function StartFilterTimer()
    if (StartFilterTimer.timerID)
        clearTimeout(StartFilterTimer.timerID);
    StartFilterTimer.timerID = setTimeout(function() { StartFilterTimer.timerID = null; FilterData(); }, 100);
I really need help on this, or are there any other suggestions or samples that might work?
thank you!

I apologize, im using Spry XML Data Set. i guess the best way to describe what im trying to do is, i want to use the Non-desctructive filter sample with the Spry Nested XML Data sample. So with my sample xml on my first post and with the same code non-destructive filter is using, im having trouble trying to search repeating nodes, for some reason it only searches the last node of the repeating nodes. Does that make sense? let me know.
thank you Arnout!

How can I play music using An app like Windows mediaplayer afding songs on the spot one by one?

How can I play music using An app like Windows mediaplayer wo I can Ads my songs one by one during playing?
Als I am using the normal music app, I can create a playlist, but not change it on the spot as for instance with Windows media player u can easily add/delete songs

Situation now: I use music app to generatie playlists to play music ok....
But I want to BE able to add and delete songs whilst I'm playing music.... In Windows media player, you van daisy do and also on android I have seen such ap's, where you can follow the song which is playing and add, remove,sort the other songs, afterwards also the playlist with the manualen choosen songs is not save

I have transefer function like (1/(s^2+s+5)) and i have a square wave input , i want to use this transfer function with this input to see the output , how can i do that , with example please.

i need to know also how to represent this transfer function in labview, try to send me example. answer me at my mail

"st" wrote:
> answer me at my mail
give a valid e-mail first, and your name, we don't like to help anonymous
people
> try to send me example.
how much do you pay ?
> i have transefer function like (1/(s^2+s+5)) and i have a square wave
> input , i want to use this transfer function with this input to see
> the output , how can i do that
First you have to know what you are doing, like an engineer : you have a
Laplace, continuous time transfer function but LabView handles discrete
signals only. Use matlab/simulink if you want to simulate continuous time
systems easily...
If you definitely want to use LabView, the first step is to discretize your
continuous-time transfer function, i.e. decide a sampling rate and convert
it to a "z transfor
m". Then you can directly use the "IIR Filter.vi" as I
said earlier.
Philippe Guglielmetti - www.dynabits.com me at my mail

Need help using the "skatter" function with brushes.

I'm using Photoshop 7 right now. I want to use the scatter function with one of the standard brushes to make a star trail, but the problem is that the stars are too thick, there's too many of them. How do I tell it to draw less instances of the brush when I'm in scatter mode? So that it's only dropping 5 at a time or so?

I have a control bar for "Master Diameter" but I can't find anything that says "spacing."

How do i lock all fields without using the signature function with adobe lifecycle designer 9

How do i lock all fields without using the signature function with adobe lifecycle designer 9 ...
I want it to have the same affect as when a signature is used but not use that function. I want a button that says lock all fields. And then you can click it again to unlock all fields...
Thanks

Here you go!
LOCK the form once its SAVEd?

How can I use JavaScript extention functions with Xalan for transforming XML with XSL

While transforming standart XML and XSL files to HTML with this servlet:
package mypackage1;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.net.URL;
import javax.xml.transform.*;
import javax.xml.transform.stream.StreamSource;
import javax.xml.transform.stream.StreamResult;
import org.mozilla.javascript;
public class Servlet2 extends HttpServlet
private static final String CONTENT_TYPE = "text/html; charset=windows-1252";
public void init(ServletConfig config) throws ServletException
super.init(config);
public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException
try
response.setContentType(CONTENT_TYPE);
PrintWriter out = response.getWriter();
TransformerFactory tFactory = TransformerFactory.newInstance();
Source xmlSource = new StreamSource(new FileReader("c:/aaa.xml"));
Source xslSource = new StreamSource(new FileReader("c:/bbb.xsl"));
Transformer transformer = tFactory.newTransformer(xslSource);
transformer.transform (xmlSource, new StreamResult(out));
catch (Exception e)
e.printStackTrace();
everything is going ok,
but when try to use javascript function in XSL file, for example like in this:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"
xmlns:lxslt="http://xml.apache.org/xslt" xmlns:my-ext="ext1"
extension-element-prefixes="my-ext">
<lxslt:component prefix="my-ext"
functions="getdate">
<lxslt:script lang="javascript">
function getdate() {
var d = new Date();
return d.toUTCString();
</lxslt:script>
</lxslt:component>
<xsl:template match="/">
<p><xsl:copy-of select="my-ext:getdate()"/></p>
</xsl:template>
</xsl:stylesheet>
recieve error-message:
XSL-1000: (Fatal Error) Error while parsing XSL file (Extension function namespace should start with 'http://www.oracle.com/XSL/Transform/java/'.).
What kind of namespace I should specify?

Hello, Paul.
I'm sure you may not use JavaScript as a language for creating XSLT extention functions with Oracle XDK Parser. This is since parser might have JavaScript interpreter to work with JavaScript, but it has not.
If you need to build any XSLT extention functions you must build them as Java class' static methods.
After that, you define the usage of the class by mean of namespace declaration as:
xmlns:your-ns="http://www.oracle.com/XSL/Transform/java/yourpackage.Yourclass"
(Prefix "http://www.oracle.com/XSL/Transform/java/" may differs if you use non-Oracle XML parser)
and use class' static method in XSLT:
<xsl:value-of select="your-ns.staticMethodName(paramsIfAny)"/>
In your case you may wish to use standard Date class:
xmlns:date="http://www.oracle.com/XSL/Transform/java/java.util.Date"
<xsl:value-of select="date:toString(date:new)"/>

Sony smartwatch 3 could not play music using walkman

I got the sony smartwatch 3 for christmas, with the intention that i can use it to track my running and play music at the same time via bluetooth headphones. Hwever this has not been able to happen. using the walkman app i have created a play list and enabled download to wearable. my watch said syncing music. so then i open smartwatch using walkman, up pops the song and play button. i click it and its says "could not play song". but strangley i can play the song on my phone and control it with my watch ok. however i do not want to have to take my sony xperia z2 out running with me as it is heavy to run with.
has anyone had these issues? would love to hear if anyone can help me solve this issue its driving me nuts.
many thanks
Sam

Thank you for your post and welcome to the forum.
If you've checked that the Walkman is securely connected and you've selected the music library but still have no audio then the unit may need service. Give Sony product support a call and they can assist you with getting it set up:
http://esupport.sony.com/US/perl/suppor ... dl=ICFC8WM

IPhone cannot play music on computer when docked with iTunes

Hey all,
This is really troubling. I cannot play music on my iPhone through my computer in Windows via my iTunes.
My home iTunes computer is MacOSX on the same computer. All of my work programs are in Windows Bootcamp. So in Windows mode, the songs appear to be gray, and cannot be clicked on (in iTunes and only on the iPhone). They are certainly locked. If I click on 'Manage Music Manually', a popup shows up asking me if I want to erase the iPhone and sync with the Windows itunes, which would be grim as all my music, videos, and everything is in MacOSX.
I have been to the MacStore about this and they couldnt figure this out either. They think it might be a faulty phone.
Has anyone heard of this and might know of a fix?
Bill

The iPhone won't play music through a computer's iTunes.
You can use this cord http://store.apple.com/us/product/TN778LL/A?fnode=MTY1NDAzOQ&mco=MjE1NTkyMQ to connect the headset jack to the computer's audio-in port.

Can I use non-apple earphones with radio remote?

I have a new Ipod 3g and want to buy the radio remote. Must I use the earbuds supplied with the radio remote or can I use non-apple earbuds and earphones? Will I still get good radio reception with a non-apple earphone?

Yes you can. I use Sennheiser PX100's and they work just fine.
Plug the headphones into the remote rather than the iPod to get the best reception.

How to use xsl document() function with LiveCycle XSLT processor

Hello,
I would like to use LiveCycle XSLT processor to merge xml documents by using the xsl document() function.
However, I have not, yet, found clear reference information on the specifics of how to accomplish in LC. For instance if you have
a transformation that does merging using a standalone xml editor (such as Oxygen), than what is required to accomplish the same
using the LiveCycle XSLT service. How do you specify the URI of the XML document that is specified as an input in the xsl document() function. Your insight is appreciated. Regards

Hello Steve,
I checked the reference that you cited (XSLT Transformation). The reference omits discussing how to use xlst document() function within a stylesheet. I think that probably means that feature of xslt technology is not directly available through LiveCycle. When I find a workaround, I'll post an update...for the user community that might encounter the same issue. Thank you for your response and insight. Regards, jb1809

Using the IF function with a range of numbers

I am working with the IF function and trying to get it to work "if" the number I'm examining is within a range of numbers.
Example:
If a wigit costs between $1000 and $1999, then a discount of $100 is given
If a wigit costs between $2000 and $2999, then a discount of $150 is given
If a wigit costs between $3000 and $3999, then a discount of $225 is given
And so on.
If cell A1 always holds the current cost of the wigit being sold.
cell B1,B2,B3 holds the value of the discount values respectively.
In cell C1 I would like to return what the current discount value is to be given for the wigit price in cell A1?
How do I do this using the IF function or is there another way?
Thanks,
Ryan

HI Ryan,
In this post you have, except for the issue noted by Badunit, the basis for the discount table described by Wayne:
I'm trying to devise a way of knowing what Cash Card a customer will receive depending on the amount of the purchase, based on the following table:
$0         to $999 purchase         =      $50 Cash Card
$1,000 to $1,999 purchase     =     $100 Cash Card
$2,000 to $2,999 purchase      =     $200 Cash Card
$3,000 to $3,999 purchase      =      $300 Cash Card
$4,000 to $4,999 purchase      =      $400 Cash Card
$5,000 to $5,999 purchase      =     $550 Cash Card
$6,000 to $6,999 purchase     =      $700 Cash Card
$7,000 to $7,999 purchase      =     $850 Cash Card
$8,000 to $8,999 purchase     =      $1,000 Cash Card
$9,000 to $9,999 purchase     =     $1,200 Cash Card
$10,000 to   UP   purchase     =     $1,500 Cash Card
To take care of the issue noted by Badunit, you need to revise the top line to state the minimum purchase necessary to earn a cash card, then add a line above that to handle purchases under that amount. I've arbitrarily chosen a $500 minimum, which results in these two lines:
$0             to $499 purchase        =      $0 Cash Card
$500         to $999 purchase         =      $50 Cash Card
To write this as Wayne's table, you need to remove all of the text (including the $ currency markers), the top end of each range, and the = sign. What you're left with is two columns of numbers: The bottom number of each range of values, and the number telling the dollar amount of the cash card for that range. Here's your table, edited to make it work with LOOKUP:
Here is a second table (Main), containing only the labels and the two cells involved in the calculation of the cash card amount. The Purchase amount is the amount used in your example. The Cash Card amount is produced by the LOOKUP formula below the image.
Purchase price is in cell B1 of the table "Main". The LOOKUP formula is in B2:
B2: =LOOKUP(B1,CC Amt :: A,CC Amt :: B)
LOOKUP acts essentially as you request in your post containing the iPad image with the time shown as 1:46. But it takes a much simpler approach.
Here's the syntax:
LOOKUP(search-for,search-where,return-from)
LOOKUP gets the search-for value (2535) from cell B1.
It looks in column A of the table "CC Amt" for the largest value less than or equal to the search-for value, and finds 2000.
It returns the value from the same line of column B (200).
Below are two more examples. Main-2 and Main-3 are copies of the Main table. Both contain exactly the same formula as Main, but have had a different Purchase price amount entered. LOOKUP uses the same CC Amt table as is used above, and returns the appropriate Cash Card value for each of the two new amounts:
You may, as implied in your 1:46 post, use a pair of cells to calculate the Cash Card amount for each widget in the purchase, then total the Cash Card amounts, or you may use a single pair of cells, one containing the total purchase amount, the other containing the Cash Card amount due for that total. That choice is yours. The formula is the same for either case.
Regards,
Barry

Error using custom xpath function with XSL transformations in BPM

Hi,
We have created a custom xpath function for use with SOA Suite and BPM. This has been built as per specified within the http://docs.oracle.com/cd/E29597_01/dev.1111/e10224/bp_appx_functs.htm#SOASE11100. We have also reviewed the Oracle Sample for mapper-107-ExtensionFunctions (sample demonstrates the use of user-defined extension functions). This has been registered with jDeveloper and SOA within the oracle.soa.ext_11.1.1 (run ant to include in oracle.soa.ext.jar)
We ideally want to use this is BPM within an xsl. However when consuming this function is either BPEL or BPM using an xsl, the xsl fails with an error such as:
XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload). The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: oramds:/deployed-composites/default/gwCustomXpathUtil_rev1.0/xsl/Transformation_1.xsl<Line 9, Column 113>: XML-22043: (Error) Extension function error: Method not found 'getWeekDayDate'. Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
In an Assign it operates fine and returns the expected result. We have included a combination of both of the Config files (ext-mapper-xpath-functions-config.xml and ext-soa-xpath-functions-config.xml) in the META-INF folder, however neither allow the use of this function in the XSL.
I believe there may be an issue getting the custom xpath functions within XSL files. Hence I have also raised an SR. Has anyone experiences of this?
Our SOA / BPM suite environment is using 11.1.1.6.4 and has the following patches applied:
13801175
14406487 (11.1.1.6.4 SOA Bundle)
13896993
13088538
Regards Dave
Edited by: DavidGaskell on Mar 14, 2013 10:08 PM

Hi All,
I am also facing the same issue...Experts can you please help us.
hi DavidGaskell, did you find any resolution, if so can you share it with me.....
Thanks,
RR

How to use Web Filters methodology with Internal ITS with NW2004s

ITS 6.2 will no longer be supported going forward with the upcoming NW2004s. Only internal ITS will be supported with 2004s. However, since PAS APIs are not available with Internal ITS, Can any one give some clue on how we can use the Web Filters methodology for use with Internal ITS with 2004s.

A long time ago, but yesterday i have had time to try again to setup the MacMini server properly. But no luck.
sudo changeip -checkhostname
gives me:
Primary address          = 192.168.1.** (i don't know it's save enough to put this IP complete on the net)
Current HostName      = server.beeldenstorm.be
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success           = "success"
So their is something wrong. But how to repair the DNS?
MacMini server is working properly on our local network, but outside not. I have done the port forwarding.
Another problem is that i have read that for the server to work properly we have to use fix IP address.
So, that's what i am doing. But in that way their is no internet connection at all.
So, no updates and ... .
Lookup and Ping test, outside our local network:
http://beeldenstorm.be/doc/lookup-and-ping.pdf
Why is this so irritating and are there soo many problems on forums?
I know: because most of us are not network/server specialists.
But Apple sells this server app like a app for everybody, easy to install?
Thanks for help.

Playing music & using non-communication functions with international travel

Similar Messages

Maybe you are looking for