Playing out an HD sequence to SD tape

Hello,
can someone help?
I have an HD sequence ( 1920 x 1080, 1080i)which I am trying to play out to an SD tape (don't have an HD deck at mo).
The playout seems to freeze on one shot but the audio is fine. It also seems to be letterboxed.
Can someone suggest what I can do so it plays out normally (16:9) to SD tape?
thanks

You have to make a DV anamorphic sequence and put your edited HD sequence in that. It should not be letterboxed.
The camera needs to be set to record DV anamorphic so it will play back properly in 16:9.
Make sure everything in the sequence is rendered to full and that the audio is mixed down.

Similar Messages

Edit to Tape playing out different sequence

Hello
Does anyone know why when I try to play out one sequence using Edit to Tape it begins playing out another? I drag my sequence called 'PLAYOUT' into the Insert option, yet a different sequence from the same project starts to record on my tape. I'm completely confused!

This has happened to me once in the past, though the sequence that wanted to play out was not even in the same project. Trashing prefs should solve your problem. I was never able to figure out any other way to fix it.
E

Need Audio help! Interview audio won't play out to tape.

My voiceover and Soundtrack audio sounds great, but my interviews sound terrible when I play out to DV to record to the camera.
I checked the item properties and noticed that all the good audio is at 44.1khz while the "bad" audio is at 48khz.
What can I do to make this play out?
Thanks!

Hi(Bonjour)!
What is the sequence's audio format? It should be 48 kHz as it's standard in video editing software.
Did you capture audio interview from camcorder? What is the audio sampling format in audio menu? (32 or 48 kHz, 12 or 16 bit?)
The audio mixdown render may resolve this problem but it's always a good thing to resample each audio file to match the sequence sample rate:48 kHz.
Michel Boissonneault

Losing audio on long play out to tape

FCP 4. I am playing out a 2 hour long project in two chunks onto two 63 minute Mini DV tapes on a Sony camcorder. After about 30 minutes into the first play out the audio starts coming in and out, then halfway through the second chunk it goes altogether and doesn't come back.
Any thoughts?

Hello Ned, and welcome to the Forums,
Are your media drives all nice and clean and tidy? Are they getting very full? Are they Firewire drives? 400 or 800? This sounds like the drives aren't quite able to keep up with the layoff...
One other note - have you upgraded your FCP 4 as much as it can go? IIRC FCP 4.5 HD was a free upgrade to FCP 4, and was quite a bit more stable.

My pictures are playing out of sequence on my project. Can anyone tell me what I need to do to get them to play in order?

Hi. I'm using iMovie for the first time. I put in only pictures. No videos. When I hit play, my pictures are playing out of order and some repeat. Can anyone tell me what I'm doing wrong or what I need to change so they play in order? Thanks!

Settings > General > Reset > Reset Network Settings

Playing out from FCP to Sony Z1

have been using my sony z1 with no problems to capture onto fcp5.1 but when it comes to playing back out the finished sequence onto a dv master i can't get the z1 to read it. with other cameras in the past once you're connected up you can see on the camera's lcd screen whatevers playing on FCP. any ideas? cheers

HDV is not like DV. To play back to the camera you must use Print To Tape. Be prepared for a long render. You can not monitor the output without a 3rd party card (Kona, Decklink) or video translator (Matrox MXO).
good luck,
x

Playing out Alpha to Digi Beta

Hi all
I have to playout some image sequences to Digi Beta and also play out their alpha channel to tape for an edit in a linear suite. So far I have been unable to do this in FCP 4.5, i can see the alpha but am unable to play it to tape.
In Avid I would just import the image seq, drop it the time line and select show alpha. Job done. I'm sorry for comparing this to Avid but that's my background!
Any gurus have any suggestions?
iMac G3 600MHz, 12iBook Combo G3 900Mhz, iPod 10G Mac OS X (10.2.x)

Yah, I just cut a white slug on V2 and my alpha bearing material on V1, then I set V2's composite mode to Travel Matte Alpha. You may need to invert depending on your requirements...
Patrick

HDV won't play out to Z1u

I'm having a tough time getting my HDV timeline to playout to a Sony Z1U HDV camera. I keep selecting View/external video/All frames and the Z1U screen stays blue. It won't even flicker. My sequence settings are
Compressor=HDV 1080i60
editing timebase = 29.97
field dominance = Upper (odd)
pixel aspect - HD 1440x1080
frame size = HD 1440x1080 (16:9)
Easy setup = Format/HD, Rate (all rates) Use/1080i60 FireWire Basic
My Z1U camera settings match. HDV 1080i60.
Any ideas

#25 HDV external Monitor Viewing
Shane's Stock Answer #25 - HDV external Monitor Viewing
To view HDV on an external monitor in high definition you are going to need to purchase a capture card, like the ones Decklink (www.decklink.com) or AJA (www.aja.com) offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed. HOWEVER, both cards are capable of down converting the signal so that it can be displayed on an SD monitor. This won't be color accurate
The real reason why you can't monitor HDV through a Firewire camera is because Firewire HDV cameras don't decode incoming HDV streams and route them to their outputs like DV cameras do.
Good options for you are the Matrox MXO2...$500...coupled with an HDTV. Or a Matrox MXO (DVI connection) coupled with an Apple 23" display gets you good quality.
And there are the Decklink Intensity and Intensity PRO cards as well, and the AJA I/O Express...
You can, however, view HDV out via firewire as DV...lowering the resolution to that of DV, but still viewable. This is not full quality nor should it be used to judge the quality of your footage or used to color correct to. This is just a way to view the footage on a large monitor.
Here are some examples of some of the possibilities:
- DV or HDV sequence output to an SDI signal on a third-party interface
- An uncompressed NTSC or PAL sequence output to a DV FireWire output
- An HDV sequence output to a DV FireWire output
Sequence and output formats must have compatible frame rates. For example,
sequences with a frame rate of 60, 30, or 24 fps can be output to a 30 fps device,
but not to a 25 or 50 fps device.
Shane

Does your music only play out of one speaker?

I was only hearing music played out of the left channel, either with or without headphones and also when played through a dock.
I found the solution:
Go to Settings : General : Accessibility and slide the L - R slider to the middle. Now the music plays out of both the L and the R speakers.
(If you tap the mono button there, then you will also hear sound out of both speakers, but you won't hear stereo effects, so don't do that).

Yes, that is a helpful addition to this thread, but my solution has to do with the speakers and the headphones that are plugged into the iPhone, as well as the stereo effect coming out of the iPhone itself. When the accessibility slider is not in the middle, then you only hear one channel of the stereo program whether fromt he iPhone or from plugged in speakers.

HELP ! Ipod only plays out of left headphone!

i have tried everything. i have aquired new headphones. and the problem still occurs. i have even tried hooking it up to my car radio via Belkin tape adapter and it only play out of the left side speakers in my car. what is the problem !? PLEASE I NEED HELP!

hi my ipod video is the same its just gone funny and no sound at all comes out of the right earphone at first i thought that my headphones were broken so ive borrowed someone elses and they still didnt work so ive just gone and bought some new headphones and they still are not workin could some one please tell me what to do because i need to know as soon as possible if u do know what to do email me on [email protected]

Play out HD thru a DV deck?

I`m trying to play out HD thru a DV deck. But, it doesn`t work. If I change the sequence settting and render I can do it.
I`m afraid to have problems to export the cut list when I finish it. Can I do that? If I compress the HD sequence to DV for play on external monitor will I have problems to export the project to the lab?
Thanks,
Juliana

jujulevy wrote:
I`m trying to play out HD thru a DV deck. But, it doesn`t work. If I change the sequence settting and render I can do it.
I`m afraid to have problems to export the cut list when I finish it. Can I do that? If I compress the HD sequence to DV for play on external monitor will I have problems to export the project to the lab?
Thanks,
Juliana
You will want to explain to us exactly (PRECISELY) what "export to the lab" means to you and what you think it means to the lab. And tell us what the lab is going to do with your project.
bogiesan

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

My iphone 5 has no sound out the speakers, all it will do is play out alarm tone, all sound were Working this morning, I have re set my phone many times

My iphone 5 has no sound out the speakers, all it will do is play out alarm tone, all sound were Working this morning, I have re set my phone many times, please help

Hey Amiee_19,
Thanks for the question. It sounds like your Ring/Silent switch may be toggled:
Ring/Silent switch - iPhone
http://help.apple.com/iphone/7/#/iph3bd01398
Ring/Silent switch
Flip the Ring/Silent switch to put iPhone in ring mode or silent mode .
In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.
Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent.
For information about changing sound and vibration settings, see Sounds and silence.
Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap the Do Not Disturb button . See Do Not Disturb.
If the above does not resolve your issue, see this article:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Thanks,
Matt M.

My music won't play out loud on my iPhone 4S ?

My music won't play out loud on my iPhone 4S ?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or bad speaker or other hardware problem..
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

HT1947 If you add music VIDEOS to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from diff playlist, no longer can see Up Next, just go to full screen mode button. Using remote app iphone 5 to play out of

If you add music videos to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from different playlist, you no longer can see Up Next, just go to full screen mode button. Using remote app iPhone 5 to play out of iTunes. It looks like it works fine for regular music, but for music videos you can't see your up next unless you go back on the computer to change once you've left the screen. When using the remote app, you shouldn't need to go to iTunes on the PC to view or edit Up Next already added. See first image, you can hit upper right and get back to Up Next (second image). Third image is music video, where you can't get back to Up Next, just swap between full screen and not. I hoped 3.0.1 would have the answer, no luck!

wow, very nice review Makes me want to get a vision for myself.
WebKnight wrote:
<SPAN>
Add the ability to randomly select a new background from a pre selected group of photos every time the player is turned on or each day.
I would love that feature. I can't stand useing my computer with a single wall paper anymore (I have 500 anime pics that i rotate between every 2 mins ) If you could make the vision rotate background every x minutes or every time the player is turned on, it would be totally amazeningly sweet!!!! (i might have to go out and buy one then :P)
I just hope that creative has better firmware support with the vision than they have had with the touch.
Once again, great review

Playing out an HD sequence to SD tape

Similar Messages

Maybe you are looking for