Playing video encode for a PSP on iPhone

Hello.
When the iPhone is launched in the UK can anybody tell me if i can use video that i have encoded for my PSP on it? The screen sizes are quite close and as i have gigs of stuff i have encoded i really don't want to have to do it all again.
Kind Regards
Alanstubbyfingers

It will have to be recoded using the h.264.

Similar Messages

Live Video encoder for Mac. Does it exist?

Looking to d a live video stream. Would like to use Vp6 I do not think Adobe had a Flash video encoder for the mac.
As always, thanks for your time and help.
Mike

There is no Airscan :-)
but you can scan wirelessly on any your OS compatible network scanner of MFP printer with a scanner.
This has to be connected to your network either via WiFi or Eth cable.

FLV video encoder for intel macs

The Flash 8 Video Encoder is installed on the system - iMac
intel duocore (the most recent version) and OS X 10.4.8 - but the
encoder does not show up in Quicktime Pro. The same thing works
fine on Powerbook G4.
Is there a special Video encoder for mac intel
systems?

Try Sorenson Squeeze Suite 4.5
Click Here for
Reviews
I've tested it in a trial version for converting my DVDs and
etc. on my personal website.
Click Here for some
SAMPLES I did.

The software i use to play video cause for multi display in which my Macbook pro has only a single display. Is theres a way to get a multi display added to to my computer

The software i use to play dj music videos cause for multi disply in which my Macbook pro has a single display funtion. Is the ant way to get multi monitor display added to my computer

If the monitor can be detected your Displays preferences should show it in its Arrangement panel. You may have to play around with your Display panel to get the desired resolution. And also may have to click detect displays and gather windows to see both sets of preferences on your main screen.

I can't play videos (youtube for example) unless it is in full screen mode. The audio works in either, but the video only shows in full screen. Any help would be greatly appreciated.

I can't play videos (you tube for example) except in full screen mode. The audio works in either, but the video doesn't load or run in the normal you tube web site.
Any help would be greatly appreciated.
Thanks
Also, the error console shows all sorts of different errors. Though, alot of error parsing values.

Do you have any Mail plug-ins? In particular, do you
have any plug-ins installed on one computer but not
the other? In the Finder, go to each of the following
folders (if they exist). What do you see there?
/Library/InputManagers/
Not Found
/Library/Mail/Bundles/
Not Found
~/Library/InputManagers/
Smart Crash Reports Folder / Smart CrashReports.bundle
~/Library/Mail/Bundles/
MailRecent.mailbundle
> I have a number of Mail Rules in
place which place messages
of certain topics in specific Smart
Mailboxes
This doesn’t make sense to me. You cannot tell a rule
to move messages to a smart mailbox, only to a normal
mailbox. Each smart mailbox has its own set of
conditions that messages must satisfy in order for
them to appear there.
OK. I misstated this. I have a number of Smart Mailboxes with their specific rules in which to route certain topics to specify mailboxes. I am trying to not have to create each Smart Mailbox on each computer.
The problem is that when I am on the road I add contacts, bookmarks, keychain items, contacts into my laptop and vice versa when home. I would just like to have those Sync on both computers. Seems like it should be easy, but it hasn't been.
I really don't think I have anything "non-standard." A few Smart Mailboxes, a couple of signatures, thats pretty much it.
Note: For those not
familiarized with the ~/ notation, it refers
to the user’s home folder. You can easily locate any
of the folders referred to in this post by copying
the folder path here, doing Go > Go to Folder
in the Finder, and pasting the folder path
there.

Flash Video Encoder for WMV - DW8 vs CS5

Hi,
I'm trying to convert a WMV file into Flash. I know that this can be done using DW8's Flash Video Encoder ....but it seems this function is no longer availabe in CS5.
I would be grateful if someone confirm that this understanding is true.
Many thanks
KT

I think this is true. I'm using MacVide VideoFlash converter now. It has trial
http://www.macvide.com/Macvide_VideoFlash_Converter/ - good prog)

Playing video through a ilive dock from iphone 3gs

I cannot play video from iphone3gs through ilive dock to my TV?

judging from this page
http://www.amazon.com/iLive-IS208B-Stereo-Speaker-System/dp/B0015AQLJI
it dont support video out in any form

How to play MPEG 4 (h.264 / AVC) videos that were encoded for the PSP

Hello,
I am trying to play a video in MPEG 4 (h.264 / AVC) format (file extension .mp4) that was encoded to play on the Sony PlayStationPortable (480x272) via QuickTime. The video plays perfectly via VideoLAN, mplayer or the PSP, but QuickTime only opens a black screen without any error message.
I am using the most current version of QuickTime on WindowsXP or Windows Vista. I have the same problem on either system.
Can anybody tell me how to resolve that problem? I do not want to reencode the videos, though.

QuickTimeKirk,
My goal is to create a looping animation for playback on an iPod. Should be easy right? Not with the QT!
I did the following:
1) Render a bunch of frames destined for looping.
2) Convert them to an uncompresses ".avi" file.
3) Open the ".avi" file in QT Pro.
4) Click "Loop"
5) Play movie. It loops nicely.
6) Click "Export" and select "Movie to QuickTime Movie"
7) Click "Save"
When I play the saved ".mov" file (You said QT retains the metadate requiring looping) IT DOES NOT LOOP!
To recap: This is a Quicktime movie. I selected looping when I created the bloody thing.
It
does
not
loop.
This *****.
This is REALLY, REALLY, ANNOYING! *** is going on with this QT Pro crap? I simply want to loop the movie. Is that really asking too much? I don't think so.
Can someone, anyone, please, please, tell me how to force the movie to loop on launch. Forcing an iPod user to muck about and select looping (can they even do that?) is not an option. Period.
Please help me,
Doug

Video format for viewing on both iphone and android devices?

hi there,
what's the best format to export a video to so that it can be seen on both android and iphone devices? does adobe support this or is there another program that i'd have to buy? any help or insight would be appreciated.
thanks!
denise

H.264 works for both iOS devices and Android devices. Here's a page with a list of the formats and specs for Android:
http://developer.android.com/guide/appendix/media-formats.html
If you choose H.264 as the format in Adobe Media Encoder, you can then choose from a bunch of encoding presets for specific devices, including various iOS devices.

How do i play video simultaneously through airplay and on iPhone

Hi, I'm currently using an iPhone 5 with iOS 7.1.2, and i require playback of video via AirPlay to a projector from here and it works perfectly fine with a wifi plug-in bought separately. However, i wish to have playback on both the projector screen and my iPhone, but iPhone only shows a TV-out screen. My teacher says it could be a mechanism to help the phone save on energy during playback by choosing to only play the video through AirPlay and not on the iPhone Called Apple Support but i didn't really get the answer that i needed. Will this problem be solved if i used an Apple TV instead? Or are there existing third-party apps available that will help me achieve my desired effect?
HELP

Not possible

Premiere Pro and Soundbooth won't play video/audio for more than a second.

Ok, so my issue is that Soundbooth won't play audio for more than a second. It plays a quick bit then stops. Premiere Pro also does the same with video, it plays a quick bit then stops. I don't know if it is connected or not but when I try to change the audio output in Soundbooth to System Default I get this error:
I set the permissions to premiere and soundbooth to full but it didn't work. I've tried UnInstalling and ReInstalling but that didn't fix the issues either. All of the other programs seem to work. Any help would be much appreciated!!

Here is the fix.
1. Open Finder and navigate to /YOUR_HD/Library/Preferences
2. Rename or move to the Trash the file: com.apple.audio.AggregateDevices.plist
3. Relaunch The Program

Video Encoding for DVD

I've been struggling to get more videos on a DVD. Since I'm not an expert on this. Most of my vides are about an hour long and are mostly PowerPoint slides and screen capture of programming demonstrations.
I just keep wondering why DVDs I get to watch TV shows can have 4-6 hours of media when I can barely get two.
Any help would be appreciated.
David

Hi David,
Now we're making some progress, thank you for sharing more info. As a CC user, you are able to download and use Encore CS6. Adobe has stopped further development of Encore so there is no CC version, but you are welcome to use CS6. Here's some instructions - http://www.streamingmedia.com/Producer/Articles/Editorial/Featured-Articles/RIP-Adobe-Enco re%3B-and-How-to-Install-and-Use-Encore-CS6-with-Adobe-Premiere-Pro-CC-93119.aspx
There are some issues with your encoding settings. To begin, the Source resolution is not a standard video resolution, which would be for instance 1920x1080, 1280x720, or 720x480. Nor is it even a computer screen resolution. How did you determine the Sequence setting in Premiere to start the project? Is that the resolution of your stills or screen-recordings? I went through this myself some years ago when tasked with creating a training video, so I understand how confusing it can get! This will affect the final quality if the downscale proportions come out weird. Note that DVD is SD and what looked nice and crisp on the high-resolution computer display will look muddy on DVD, but quality loss can be minimized with good workflow practices.
Next issue, you are encoding to .mp4, when in fact DVD requires MPEG-2 for DVD. So any other format you encode to will just need to be transcoded (re-encoded) in your DVD software again. More quality loss. Also, source is 30fps but Output is 24fps.
In AME, for FORMAT, please choose "MPEG-2 DVD", and then preset "NTSC Widescreen Progressive". That should be the best bet, and using 29.97 frame rate. Looks like the program is 58 minutes, so you ought to be fine with CBR encoding at 7 or 8 setting. Touch nothing else in the encoder besides bitrate. The export should result in an .m2v video clip, and on PC the audio would be .wav, for Mac might be .aac, not sure what they use there. In any case, Encore would convert audio to Dolby. I don't know how iDVD works, sorry.
Looking at the filenames you are using, I would avoid putting periods in the name, as the file extension typically follows the period, such as .jpg, .mov, .m4p etc, this can confuse the software sometimes. Use underscores or spaces instead, such as _.
Good luck with all this
Jeff

EPubs not playing video; formatting for 10" android

Pulling my hair out here regarding fixed ePubs. I have created my document in InDesign CC (2014) and exported to fixed ePub. The document has embedded hyperlinks and video files. Open the ePub on an iPad and it works perfectly. Open it up in PlayBooks on my Galaxy Tab 4 and the video files don't even appear on the page. The secondary hyperlinks to YouTube content don't work (don't work on iPad either). Not sure why iPad works and Android does not. A secondary question is why my 10" alternate layout for Android crops on top/bottom instead of giving me the full screen layout. Hoping someone has some clues as to where to start to remedy my problem. Getting conflicting reports online saying that Play Books does/doesn't support video; tried numerous eBook readers with even less success recognizing the fixed layout.

Pulling my hair out here regarding fixed ePubs. I have created my document in InDesign CC (2014) and exported to fixed ePub. The document has embedded hyperlinks and video files. Open the ePub on an iPad and it works perfectly. Open it up in PlayBooks on my Galaxy Tab 4 and the video files don't even appear on the page. The secondary hyperlinks to YouTube content don't work (don't work on iPad either). Not sure why iPad works and Android does not. A secondary question is why my 10" alternate layout for Android crops on top/bottom instead of giving me the full screen layout. Hoping someone has some clues as to where to start to remedy my problem. Getting conflicting reports online saying that Play Books does/doesn't support video; tried numerous eBook readers with even less success recognizing the fixed layout.

Cannot play video that I took on my iphone!

I took a video on my iphone which I then emailed to a yahoogroups group as a result of which, I received the video via email as well (yahoogroups emails also come to the sender of the email).
When I tried to click on the attachment to play it, I get a message that I cannot play the video.
What gives?

You can't play movies in iPhoto. But, you can in quicktime, which is installed along with the OS. Just double click on the .mov file and quicktme should start.

Premiere Pro CS6 crashing while playing video encoded with Picvideo M-JPEG

Here is a video of what happens: http://www.youtube.com/watch?v=gmP0UBGvEUA
Whole video is alright except for those 10-90 frames that causes adobe to crash.
At first i thought that there was a problem in 64bit decoder, but every other software (64bit videoplayer or 64bit video-editor) can read those frames alright.
Please, help me with this.

This MJPEG http://forums.adobe.com/thread/730396 discussion may help

Playing video encode for a PSP on iPhone

Similar Messages

Maybe you are looking for