Playing video in tv with hdmi problem...

I have a laptop with hybrid graphics but the one who is in charge of displays is the intel one. when i put the other monitor to the right, and i play a video in the laptop display, it plays well but as soon as i drag it to the right screen it freezes and began to freeze the computer... This also happens when i put it in twin mode..
Even when i play the video with the nvidia card it freezes as soon as i drag it to the other screen.
I also cant pass audio through the HDMI i think it has to be with dwm...
Last edited by chupy35 (2013-12-06 05:43:24)

Your best source of information regarding the Windows Media Player object model is MSDN. I've only done a little bit of playing with Windows Media embedded in LabVIEW, but enough to know it was a pain and not worth the effort. NI has a KnowledgeBase article that indicates you will probably need LV8. In terms of your specific query regarding position, you should take a look at the "Controls" object in the object model, as that has properties I think you're going to need.

Similar Messages

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

This has happened on several computers. I can download using video download helper with on problems until I attempt to download "Dishonorable Disclosures" on Yo

This has happened on several computers. I can download using video download helper with on problems until I attempt to download "Dishonorable Disclosures" on You Tube once a download attempt is made on that video download helper stops working for that video or any other video. Could this be a virus or malware? How do I fix download helper after this happens?

Which movie do you mean?
Try to clear the Google cookies.
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
You can also try to delete the webappsstore.sqlite file in the Firefox Profile Folder to clear the local storage.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

I cant play videos on Facebook with Firefox but I can with IE. I am using Firefox 4.0.1

I cant play videos on Facebook with Firefox but I can with IE. I am using Firefox 4.0.1

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Is there a fix yet for Firefox so it can play videos on websites with "Hotlink Protection"? It's been 9 years now and still no fix.

How come Firefox still hasn't come up with a fix for it to be able to play videos from websites that have "Hotlink Protection"? The error "Video not found" always comes up. This has been like this for almost 8 or 9 years now. (I'm probaby off by a year or two). Internet Explorer, Google Chrome, Opera, Safari, etc... all have no problem whatsoever and can play the videos easily.

Applecare on the phone is torturous, I spent an hour getting redirected back and forth between 3 different departments each saying "This isn't my area, you need to talk X department" or "why did they send you back to me?" Then you get disconnected.
The nearest apple store is about 2 hours away. If I'm near it again, I'll stop by. I was just hoping either the problem was patched or someone online knew how to fix this infamous problem yet.

Can not play videos in background with iso 6

I have updated my iphone 4s to iso 6 operating system. I am not happy this this new operating system. Anyway, i have a problem playing videos in background after the update.. I was able to play youtube music in background with iso 5.1 but not with iso 6..

Hei eidnolb (what ever u nickname means)
I can give u this answere on u quest:
Under Run Without Permission i can find Shockwave Flash Object:
Status: Deactiveted (in Norwegian language)
Version: 10.2.159.1
What will u recommand me to do now?
And i'm the one that should say thanks!

I have been uploading videos to Facebook with no problem. Now get a message that the user has opted out of FB platform. Videos will not upload.

I have been uploading videos to FaceBook for about a month now with no problems. Yesterday, I went to post another video and got this message "user has opted out of FaceBook Platform." I can still post photos from this computer as well as make regular written posts. All videos posted are 10-11 minutes in length.

I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!!

Quicktime not play video only Audio with Lion

I am trying to watch avi file through Quicktime the I only get audio and no video after Lion installed.
I downloaded Perian again
Whats the problem?

There seems to be an issue with the version of Quicktime X (10.1) in Lion and Perian version 1.2.3.
The are several options in terms of other media players (VLC, MPlayerX, RealPlayer [ugh…], and others…) that will handle FLV files with ease. Alternatively, you could run your video files through an encoder (HandBrake, MPEG Streamclip, SmartConverter, etc.) converting the files into something QuickTime naturally understands like an MP4 or MOV.
But, you were probably happy when everything just worked with the QuickTime / Perian dynamic duo and just want it the way it was. It seems the best way to make this happen, is to go back to using Perian 1.2.2, for the moment anyway. Seems to do the trick for anyone with this problem, so…
1. Remove Perian 1.2.3 from the system.
Quit all your apps, expecially QuickTime. Open System Preferences and click on Perian. You're looking for the "Remove Perian" button; just click and if it asks, type your password. Next, back to the main System Preferences screen where you right-click(or control-click) on the Perian icon. A menu pops up with the choice to remove the Preference Pane. Click on it and Perian is officially uninstalled.
2. Restart the computer
Probably overkill, but better than having to repeat the process because you didn't.
3. Download and install Perian 1.2.2
Get it here: http://perian.cachefly.net/Perian_1.2.2.dmg , or here:http://www.videohelp.com/download/Perian_1.2.2.dmg
Once its downloaded mount the disk image, but proceed with care. Perian will likley try to upgrade itself right after you install it. Best thing to do: disconnect from the net for the install process. Then as usual double-click the "Perian.prefpane" file, choose who you'd like to install it for, and enter your password as needed. Finally, right before reconnecting your machine to the world, uncheck the "Automatically Update" box in the Perian preferences.
Try testing one of the FLVs in QuickTime or QuickLook and with a bit of luck, radio becomes TV.
Oh… and on the off chance it doesn't work and you want to watch some FLVs? Use VLC (http://www.videolan.org), or convert them with HandBrake (http://handbrake.fr).
Good luck!
Sources:
http://www.videohelp.com/tools/Perian/old-versions#download
http://forums.cocoaforge.com/viewtopic.php?f=25&t=23541&start=20
http://fairerplatform.com/2011/04/vlc-player-1-1-9-perian-1-2-2-updates-ship/

Is it possible to play videos or clips with the appletv from an Time Capsule direct without other hardware?

I want to play videos, movies and music-clips (either mp4, other formats or out of an itunes-db) on my appletv without using other hardware than the apple tv an the Time Capsule (except the tv ;-) ). Is it possible to stream direct from the Time Capsule? With other and even cheaper NAS-Storages is it possible, eg. with the ps3 ...Thanks for help.

The TC from the day it was introduced until today.. has got a bigger hard disk and gained dual band wireless.. but nothing substantial.. it is not a NAS and has never been more than a target for TM mostly laptops as any desktop Mac can have an external drive for backups cheaper and faster than TC.
Many people were disappointed that Gen4 was a nothing upgrade. it is just a Gen3 with a different wireless card. Don't know if there will even be a Gen5 as Apple seems to see Cloud as the answer for remote storage. I would not be surprised if it was dropped completely. But who knows.. Apple sure don't let any secrets out of the bag.
And for the AppleTV 3 there is no JB or other things possible at this moment?
Not yet.. we are awaiting as some major effort is being expended. There is a hack just recently for the ATVv2 with v5 of iOS.. so the v3 may not be far behind.. v2 are commanding high prices at the moment on ebay though.. near to double purchase price when they sold out before v3 arrived.. as people discover their TV watching plans are now in tatters. Or their library of movies is no longer accessible.

Playing video in labview with some basic information output for my program.

I'm trying to program something similar to NI's product DIAdem CLIP in LabVIEW. A program that synchronizes test data with video. I'm trying to find a decent video component that gives me basic information about what is being played.
My first thought is to use Windows Media Player 10 w/ LabVIEW ActiveX container. I'm a little confussed as to what I'm doing with it, however. I can't find any information about Windows Media Player 10 in the Class Browser.
All I really need is:
Input:
1. The file for the embedded media player to play.
Output:
1. The framerate of the file being played.
2. The current frame.
I think with that I should be able to put a marker in my data graphs that indicates where that data correlates with the playing video.
Thank you for your input!
-Nic

Your best source of information regarding the Windows Media Player object model is MSDN. I've only done a little bit of playing with Windows Media embedded in LabVIEW, but enough to know it was a pain and not worth the effort. NI has a KnowledgeBase article that indicates you will probably need LV8. In terms of your specific query regarding position, you should take a look at the "Controls" object in the object model, as that has properties I think you're going to need.

How to play video repeatedly and with no audio

Hello all,
I use the following code to play video in Flex:
public function startPlayback(event:CairngormEvent) : void
     if (model.nsDemoRemotePlay != null )
                               * Stop and close previous NetStream.
                              var demoStopStreamEvent :VCDemoStopStreamEvent = new VCDemoStopStreamEvent();
                              CairngormEventDispatcher.getInstance().dispatchEvent(demoStopStreamEvent);
                    nc.connect(null);
                     * Setup NetStream for playback.
                    model.nsDemoRemotePlay = new NetStream(nc);
                    model. nsDemoRemotePlay.receiveAudio( false );
                    model.nsDemoRemotePlay.client = this._responder;
                         model.videoRemote = new Video(model.videoRemoteWidth, model.videoRemoteHeight);
                         model.videoRemote.attachNetStream( model.nsDemoRemotePlay );
     model.nsDemoRemotePlay.play("assets/videos/Demo.flv");
I have two questions:Could anybody please help me in answering these.
1. Is it possible to play a video without audio? I used receiveAudio( false ) with NetStream object. But audio is still there.
2. How can I play a video play repeatedly? I want to play video repeatedly and stop it only when a Stop event is fired.
Thanks.
roshni.

NSObj.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
public function netStatusHandler(event:NetStatusEvent):void
     switch(event.info.code)
          case "NetStream.Play.Start" :// your code
                                                     break;
          case "NetStream.Play.Stop" :// your code
                                                     break;
}//end of netstatus handler function
I hope my post will answer your question or helps

How to play videos in JSP with the helping of StoreProcedure?

and more,how to converse the avi,dat,mpg,mov,wmv format into rm format??

Under "General" in iTunes Preferences, does "Play
Videos in.." allow you to set the playback of videos
as you desire?
kind of. It does spawn a new window, which is great (thanks!). But it seems to be at a lower resolution - does iTunes compress further or display at lower res? What is the function that people are supposed to be able to use to use iTunes as a media center to watch movies?

Issue playing videos in iTunes with Windows 7 x64

Hi, hoping someone can help.
I am running Windows 7 64 bit, and have installed the latest version of iTunes. I have around 150 HD movies stored on my PC, which were previously from an iMac I owned. Whenever I play one of these, the video keeps stuttering and dropping frames then freezing etc. Now, the issue is not with the files, as they play in WMP and VLC perfectly fine. It happens in exactly the same spot in the videos everytime they are played. My CPU reaches 100% then drops to 0% as the freezing is happening. It appears as though my CPU cannot handle the files, yet they play fine in another player.
I was wandering if anyone else is having this problem, it's incredibly frustrating because I love iTunes as a media manager.
Thanks.

Try reset winsock and see it will fix the issue.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Embedding youtube video in flash with as2 - problem with black bars

I have successfully embedded the youtube video in my flash code with:
//create area to put youtube video on screen
this.createEmptyMovieClip("reason1_video", 10000);
reason1_video._xscale = 60;
reason1_video._yscale = 60;
this.reason1_video.loadMovie("http://www.youtube.com/v/PUt7Kw9Q_Qc?hd=1");
However, the video plays with black bars on top and bottom even though it plays without those directly from youtube:
http://www.youtube.com/parallelic#p/c/258EA3637F3467BD/7/PUt7Kw9Q_Qc
Even if I take off the scaling, it still has the black bars. How do I get rid of them?

So basicly your putting a video in to your flash project

ITunes after 10.8.3 combo update doesn't play video, only audio with a black screen

My iTunes has been randomly playing really old QuickTime files as I've had iTunes start in 32 bit mode. That worked for a while, but like I said, it has stopped working and iTunes is back to not playing older QT movie files. Fine.
Now, however, iTunes didn't play a PROTECTED file that I purchased from the iTunes store. I made sure my computer was authorized to play the file, the store said my computer was already authorized. iTunes plays the AUDIO of the selected video, but only shows a black window where the video should be playing. It did this for several videos. I was confused.
I restarted my computer and now iTunes is playing the file as it should. It is not however playing my MPG QuickTime movie files that it has played for years.
What is going on with the software? I've followed the threads telling me to remove Perian, remove, Filp4Mac, restart, run in 32-bit mode, etc and nothing is now working when those solutions worked just last week.
Any input about what I should try next would be greatly appreciated. Thanks!
Chad

Reinstall 10.8.3 using the 10.8.3 combo installer.
http://support.apple.com/kb/DL1640

Playing video in tv with hdmi problem...

Similar Messages

Maybe you are looking for