Playing VIDEO_TS folders using DVD Player?

Hello,
Right before I updated to 10.4.3, I had started using Mac the Ripper to download all of my DVDs to my external FW drive so that they all would be instantly available to me. They played just fine in DVD Player (I just chose File, Open, and chose the appropriate VIDEO_TS foler).
However, since I upgraded to 10.4.3, anytime I try to open one of those folders in DVD Player, it says "media type not supported" or something to that effect.
Do I need to reset the preferences on DVD Player or something to get it to work again?
Thanks!

I haven't updated the DVD Player from 4.6 to 4.6.1 as I noticed some people were experiencing difficulty playing DVDs with it.
A couple of things you can try are to drag the VIDEO_TS folder to the DVD Player icon to open it or you can try to force-open it by holding down Cmd & Option keys and dragging the folder to the DVD Player icon.
Matthew Whiting

Similar Messages

Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode".

It only does this on Reading Rainbow DVDs so far: Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode". It does this whether the laptop is plugged in or is using battery power. How do I get it to play all?? Thanks.

Turns out it was NOT the software or the Mac. I bought a portable DVD player and this problem happens with it, too.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

Can't play Disk Image in DVD Player

I saved my iDVD project to disk image so I could view the video on my Mac Pro prior to burning the project.
When I double click the saved disk image icon, the archived file that I made earlier populates on the screen instead of the DVD player opening. That's strange?
I see an Audio_TS file, Video_TS file, and a DVD-ROM contents files instead of the DVD player. Why isn't the DVD player playing the disk image that I saved?
I also tried the process in reverse. Trying to open the saved disk image from the DVD Player and the saved disk image is all greyed out not allowing access to view the video.
Thanks in advance for any assistance.
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.9) Mac Pro

All I want to do is just play the disk image.
Read through the following for help.
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
G4 DP 1.25 GHz 2GB RAM 4 Internal Drives: 860GB Mac OS X (10.4.9) 2 SuperDrives (SL & DL)

Playing slideshow on a Dvd player

I did a few slideshows with I photo and I Dvd and it was pretty difficult to burn it on a dvd and play it on a dvd player. I change slideshow program, Fotomagico, and I have the same problem. I have a slideshow Mpeg 4, I can play it on my screen but not on my Tv with a dvd player. Do you know a format that will work for a dvd player? Which converter software can I download?

You are not very specific about what's difficult about burning to the DVD and playing on a DVD player. Most consumer DVD players will not playback MPEG4.
Standard Video DVDs have a very specific layout. The disc itself needs to be recorded in UDF format (which is a variation of the ISO9660 format of CD-ROMs). The disc must have a VIDEO_TS ("video title set") folder at the top level (there can also be an AUDIO_TS folder, but on DVD Video it generally doesn't have any data in it). The VIDEO_TS folder must have a collection of .IFO (title information), .VOB (video object), and .BUP (.IFO file backup) files. There must be one VIDEO_VTS.VOB, VIDEO_VTS.IFO, and VIDEO_VTS.BUP file for the disk VGM (disc title) menu, then a series of VTS_* files with the titles themselves on them.
The .VOB files are actually multiple video (one main, the rest are alternate "angles"), audio (one or more languages, for instance), and subtitle streams multiplexed together. The video must be encoded as MPEG-2 at 9.8 Mbps or less, or MPEG-1 at 1.856 MBps or less. Permitted resolutions are 720x480, 704x480, 352x480, or 352x240 pixels at 29.97 frames per second for NTSC video (used in the USA and Canada), and 720x576, 704x576, 352x576, or 352x288 pixels at 25 frame per second for PAL/SECAM (used in the rest of the world). There are also some specific requirements on the frequency of I, P, and B-frames in the video streams, etc.
The audio may be encoded as PCM, DTS, MP2, or AC3 -- and there are of course requirements as to the frequencies, number of channels, and bitrates permitted for each.
The .IFO files contain information about the number of streams in the VOB, where they are, the chapter information, etc.
When you use iDVD to create and burn a DVD, it takes care of the whole business of encoding and formatting the DVD for you to be compliant with the requirements for DVD Video. You just tell it what you want, and it encodes the video, writes the IFO data, and builds the DVD for you.
When burning a DVD, keep in mind that slower burns result in more reliable disks, so burn the disk at the slowest possible speed. If you are going to burn several copies, and you have disk space, it's handy to simply create a DVD image file that you can burn later with Disk Utility.
Also, keep in mind, not all set-top DVD players handle recordable media (particularly dual-layer and read/write media) very well. Some brands of recordable media are also better than others. Older DVD player may not be able to read recordable DVDs at all. Many players handle DVD+R better than DVD-R, though older players might prefer DVD-R disks.

16:9 DVD created in iDVD plays cropped on Panasonic DVD player

I created a DVD from a 16:9 QuickTime movie using iDVD 7. Everything works fine when I play the video on a computer (Mac or PC), but when I play it on my DVD player (a recent Panasonic that plays all commercial 4:3 and 16:9 DVDs perfectly) it plays the video cropped to 4:3. In other words it completely loses the left and right edges.
I have a 16:9 LCD TV so I verified that the settings on the TV were fine and they were. I am certain that the image that the TV receives is already a 4:3 image, it isn't cropped by the TV.
I tried to change the settings on the DVD player manually to see if it was a problem with the player (although I doubted that to start with as I had no problems with commercial DVDs ever). It didn't matter if the DVD player was manually set to 4:3, 16:9 or Auto, all I could get was differently resized versions of the 4:3 cropped video. It appears that for the DVD player, the extra information outside the 4:3 box doesn't exist, it will only play the 4:3 part of the 16:9 video.
Does anybody know why this happens and how to fix it?
Thanks, this is driving me nuts as I've already rendered and rebuilt and re-rendered this project twice and I need to get this DVD to my friend before he moves.
Andrew.

I think I figured it out.
Download myDVDedit from http://www.mydvdedit.com/index.php?pg=downloads
From iDVD save the VIDEO_TS folder (or copy it from your disc/disk image) to your computer.
Open the VIDEO_TS folder in myDVDedit
Use myDVDedit and change all of the VTS files to use an 16:9 auto Letterbox aspect ratio in the IFO section
Save VIDEO_TS from myDVDedit
Load up Toast and burn a new DVD from your VIDEO_TS folder.
I'll test this at home and let you know if it worked on my DVD player.
Cheers, Andrew.

I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit.

I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
Anthony

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

My dvds that are made from iDVD will not play in a standard dvd player. Can anyone help me?*

I am running iDVD v 7.1.2(1158). I used to be able to make dvds that would play in a standard dvd player. As of today I cannot. I do not know what has changed and I do not know what needs to be updated. Can someone assist me?
The dvds that I can make will play from a disk image and they can play perfectly fine in a computer but not in a standard dvd player. I am using an external dvd burner, (The same one have always used) to create the dvds. I am using iDVD to author them.
Here is a list of my hardware.
HL-DT-ST DVDRAM GSA-5120D:
Firmware Revision:          A102
Interconnect:          USB
Burn Support:          Yes (Generic Drive Support)
Profile Path:          None
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RAM, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh
iDVD:
Version:          7.1.2
Last Modified:          7/19/11 8:19 PM
Kind:          Intel
64-Bit (Intel):          No
Get Info String:          iDVD 7.1.2, Copyright © 2001-2011 Apple Inc. All rights reserved.
Location:          /Applications/iDVD.app
Can anyone help me? The dvds are not even detected

• Material used: Video-Codec and Photo file format and Audio file format - matters too. I use
- Video - StreamingDV .dv or AIC
- Photos as .jpg (only)
- Audio as .aiff 16bit 44.1kHz or 48kHz (ONLY - never .mp3 or directly from iTunes - all converted to .aiff first)
With this I do not mean any setting in iDVD - BUT the raw material used in iMovie / FinalCut / Avid 100 / Adobe Premiere
As this usually matters - later in iDVD
How did You Export from Video-editing program used ? I prefer
• iMovie HD6 - just drop the movie project icon (NOT iMovie Icon - the PROJECT one) over into iDVD big menu window (avoiding - drop-zones as they are for other tasks)
• iMovie'08 to '11 - Share to MEDIA BROWSER - AND AS MEDIUM - not HD or other resolution as iDVD does a bad downscaling job.
• iMovie'13 (version 10.0.x) - Share as 480p - Import this into iDVD
• FinalCut (Pro or Express) - Export as QuickTime .mov - NO QUICKTIME CONVERSION - IMPORTANT
• Adobe Premiere - I don't know - not tested Yet
• Avid 100 - I don't know - not tested Yet
Cleaning the DVD-burner - If it Burns DVDs OK then that's may be not the problem - But if it only burns CDs OK then either the DVD-burning-laser is dirty or broken.
It is very easy to kill this DVD-laser as it over-heats if one burns several DVDs in a row. I only burn three at a time - then let it cool down for 30 minutes till next batch of three DVDs.
Yours Bengt W

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Lose sound with optical speakers after using DVD Player

For some reason when I launch DVD Player my sound will stop on all other applications. Quitting DVD Player won't fix this either. In iTunes, the song won't even begin playing. I've tried checking Audio MIDI Setup, and for my ouput I'm only allowed to choose "None". When I try to select Built-in Audio it won't let me. However, before I launch DVD Player Built-in Audio will output to the speakers. My speakers are Logitech 5.1 Z5500's and I am using the optical connections. They didn't come with any sort of drivers and seem to work fine before using DVD Player, so I don't really know what's up.
Any help is greatly appreciated,
Powermac G5 Dual 2.7 Mac OS X (10.4.3) Logitech Z5500 Digital Speakers

In DVD Player's preferences when Disc Setup -> Audio Output is set to "Digital Out - Built-in Audio" the AC3 stream is sent to the speakers. This is an encoded stream straight from the disc that provides the 5.1 channel surround sound. The computer cannot take the sound from other applications and mix it with the AC3 stream because it would first have to decode the stream, mix the sound and then re-encode the stream. This is very processor intensive and your system would take a big performance hit.
To get sounds from other applications while watching a DVD change Disc Setup -> Audio Output to "System Sound Output". You'll lose the 5.1 output from the movie but will hear the sounds from other applications.

Playing Photo CD on DVD Player

Each year I burn to a CD my digital photos stored in my iPhoto albums. When I play them on a DVD player, I always get identical consecutive photos, only one of which plays/shows. The other creates a blank screen for the five seconds that each photo plays. How can I eliminate the duplicate/second photo from the CD? This glitch has always happened no matter which DVD player I use, and no matter which version of iPhoto I have used over the past 5 years (currently using v6.0.5). Can anyone explain and offer a solution?

nedhead:
Welcome to the Apple Discussions. I think it is the resource fork of the image file. The “resource fork” contains special instructions for the creator application or the computer’s operating system. They get included with each file. PC's don't use a resource fork and sending image files to PC results in the second file. There are applications to strip that resource fork. You can search at VersionTracker.com for "resource". One that I've used is GrimRipperCM.
I think that should get rid of your mystery files on the Photo CD.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to export HD footage to play on a standard DVD player

Hi
Sorry, I am very new, but very excited about learning more about cs4. I am thinking to buy a HD video camera. Does CS4 easily convert HD footage at the dvd burning stage to then play on a regular dvd player. I understand it will mean downgrading to SD - but I am thinking about all the people I will give dvds to for them to watch. Or should I just get a camera that films in both HD and SD

Let me give you an optimum example of my last HD to DVD timing. The video was shot with two cameras under good lighting conditions and there was very little color correction required and only a few special effects. The finished video was 39 minutes (1.35 GB). The AME encoding time on my 8 core (2.33 GHz) with a really fast RAID 0 array was 36 minutes 48 seconds! If you start adding in a lot of color correction and lots of other effects encoding time does increase significantly. I am convinced that the DVD was of much better quality that had we shot it in SD. I have had problem shoots (lighting) that required vast amount of color correction etc. that required many hours of MPEG2 DVD encoding.
Incidentlly I do not export from Premiere (which uses the new copy of the Project on your C:drive), I close Premiere and open AME and use the much faster true project file on my RAID 0 array.

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

How to bookmark ripped DVDs on a macbook using DVD Player

I have some video that I'm watching using dvd player - ripped on the hard drive for better battery performance (I presume) and also just ease when traveling ... and bookmarks are grayed out.. cannot seem to bookmark things opened as "dvd media" from the file menu. how can I bookmark where I left off so I don't have to re-open, and fast forward to where I thought I was?
tia,
ferd

Have you ripped the file and kept it in DVD format?
If you rip it using HandBrake ( http://download.m0k.org/handbrake/HandBrake-0.7.1-OSX.zip ) then it will compress the video to mp4 which will be much smaller but still near DVD quality - you can then add it to iTunes or the Movies tab (on the left hand side of the Finder) and then using Front Row (pressing command + esc or menu on the apple remote) and going to movies you can watch the video, then when you stop watching you can go back to it later and it should play from where you left off.
Matt

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

Playing VIDEO_TS folders using DVD Player?

Similar Messages

Maybe you are looking for