Playing YouTube on Windows 7 Media Center

Hi everybody,
I've set up a Win7 Media Center machine which is working fine with my tuner and live TV.
I just want to be able to play my favorite YouTube channels on the big screen. Macrotube is returning an error message. I later learned it's because WMC has disabled the codecs needed to play Flash, so I installed Shark007 and spent a lot of time trying
different config values for Shark007, but still I am getting the same error message for YouTube videos.
I have also installed TunerFree plugin and for some channels (like TED TV, or NASA) it works fine (I guess their video format is Windows compatible) but I cannot play YouTube.
Any help HIGHLY appreciated.
Thanks

I suggest that you try asking this in the Windows Entertainment and Connected Home forums, there are some Windows Media Center experts there:
http://experts.windows.com/frms/windows_entertainment_and_connected_home/f/114.aspx
Tim De Baets
http://www.bm-productions.tk

Similar Messages

TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

How can I use the FM tuner in Windows Media Center?

Hi everyone.
New to the threads.
Found this site while looking for answers to a problem I'm having. ?:|
I received my Toshiba Satellite computer as a Christmas gift. I noticed it has a cool FM tuner feature.
I also have been playing around with Windows Media Center.
However, I cannot figure out how to operate the FM tuner inside WMC....?
I added the NXP FM tuner program to the "extras" on WMC, but instead of opening up the tuner inside WMC it just opens the separate program.
Does anyone know how I can use the FM tuner (or a different one perhaps?) inside WMC?
Thank you! :)

Hello
I don't have any experience with this because my Satellite doesnt have FM Tuner but nice discussion about it you can find under
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=138027
If you will find final solution it will be nice if you can describe own experience with it. It can be useful for other people here.
Bye and good luck!

How to play MOV files inside Windows Media Center Edition

I've installed QT Pro, but am not able to play MOV files inside Windows Media Center Edition (MCE). Under "My Videos" from the MCE main interface, I can see the files, but once selected, error message indicates unknown/unplayable file type.
How do I get my MOV files to play inside Windows MCE??
Marc

Quote from: cosmosk on 05-April-05, 22:29:47
I don't use MSI's MC application so I can't directly answer your question.
However both Win DVD 6 and PowerDVD6 play them just fine by launching the ts.ifo file.
Yes, I know that, but that means that I should use at least two applications. I need only one front end to launch all my media files, inluding ripped DVD files, not as separate VOBs but as whole movies decribed in IFO files.
Kiero

ITunes won't open after using Windows Media Center

Today I used Windows Media Center so I could play my music and videos through my X-Box. Now when I try to open iTunes it comes up with the message "The folder itunes is on a locked disk or you do not have write permission for this folder". Nothing has been changed, I did not lock anything, and now the folder automatically reverts itself to Read-Only. Please help

I also tried un and re-installing itunes but it did nothing

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Is there or can Microsoft develop a app for smart TVs so you can stream from Windows Media Center

I have used Windows Media Center for years to record TV programs and have even sertup my kids Xbox 360 as an extender. I've recently purchased a smart TV which allows me to steam music and home videoes from Windows media player but ofcourse the .wtv
files will not play. Would it be possible to develop an app for Smart TVs and other devices so they can be used as extenders. I'm sure many people would be willing to pay for the app. I've tried some 3rd party extenders and not been
happy with there performance and I'd like to not need another box and remote. I'm sure these new TVs have the ability to do it will microsoft allow them too?

Hi,
I agree with S.Sengupta.
You may contact the support of the smart TVs and request a tool to match Windows media player.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Apple 23" Cinema Display not supported by Windows Media Center Edition PC

Well I'm learning the hard way and of course that is through experience. I just found out after purchasing my 23"Apple Display and talking to the Apple Support Tech is that Apple does not support the Cinema Display with PC's,
Wish Apple would be more transparent on this issue prior to a costly purchase. For example on the Apple site listing the Display in system requirements:
Windows PC and graphics card that supports DVI ports with full single-link digital bandwidth and VESA DDC standard for plug and play setup
Well I have a Windows PC with a Nvidia Graphics card just as the system requirements state. Yet my PC will not adjust to proper resolution for the Apple Display. The graphics card works fine. Its a driver issue where the Apple Display is not compatible with Window Media Center Edition on Windows PC's
So in conclusion the system requirements for Windows PC's that Apple is stating For Apple Cinema Displays is not correct. The system requirements need also to state that the Apple Cinema Display does not work with Windows Media Center Edition (MCE)
Hope that helps for any users with Windows Media Center Edition thinking or already have purchased an Apple Cinema Display.
73,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Well,
Here is the latest from Nvidia Customer Care educating users on the DVI port on the Nvidia GeForce FX 5200:
"...The basic difference you will see in these ports are in their Physical appearance. The DVI-D has less pins compared to the DVI-I port connector. Also the Apple 23" Cinema Display will work at a resolution of 1920*1200. But this graphics card that is Geforce FX 5200 will not support this resolution of 1920*1200. It will support only till 1600*1200. So that's the reason you were having the issues were you were not able to adjust the resolution"
So I ask, which Nvidia GPU card can I substitute for the current one at a reasonable price? I don't need dual link, so single link would be sufficient for my application . Here is some more helpful tips from Nvidia support. Hope this helps other users, utilizing the Apple 23" Cinema Display"
"...go for a Geforce 7600 GS graphics card which is a AGP 8x compatible graphics card. This graphics card is just 129$ graphics card. Please visit the given link to know about the details of this graphics card."
http://bfgtech.com/7600GS_512.html
And now for the final conclusion of what you need to know regarding DVI ports. Evidently Nvidia uses a term called normal DVI port. I've never heard of that term in the literature in shopping for a graphics card and checking the specs. I guess you need to look for the specific term single or dual link specifically. If it doesn't say that, then what I can gather it is a normal DVI port...whatever the heck that is?
"...Yes let me inform you that the Geforce FX 5200 graphics card does have one DVI port and one VGA port. But these single link and Dual link DVI port is totally different compared to the normal DVI ports. As you wanted to connect an Apple 23" Cinema Display to this graphics card. So for this you will need to have a graphics card which will have a Single link or Dual link DVI ports not the normal ports. So to support an Apple 23" Cinema Display, you will need to have either a Geforce 6 series or the Geforce 7 series graphics card. That's the reason I gave you the list of graphics card which comes with Single or Dual link DVI ports, not the normal ports."
Oh well off to the market to pick up either a Series 6 or Series 7 Nvidia Graphics card. The Nvidia Customer Care team was very helpful and replied to my inquires very quickly through email.
Hope this long drawn out expose helps others who might have issue with connecting their proud Apple 23' Cinema Display to their PC
Kind Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio PC, G-Drive External HD,Toshiba Satellite Pro Notebook

ITunes won't open after setting up Windows Media Center

Today I used Windows Media Center so I could play my music and videos through my X-Box. Now when I try to open iTunes it comes up with the message "The folder itunes is on a locked disk or you do not have write permission for this folder". Nothing has been changed, I did not lock anything, and now the folder automatically reverts itself to Read-Only. Please help, I cant get in to update my iphone or anything.

Folders always show up as read only.
You need to select the permissions tab on the iTunes folder properties.
Your account and SYSTEM should have full control.
It's worth checking this although I don't see why installing WMC should have changed them.
There is help on permissions here:
http://windowshelp.microsoft.com/Windows/en-US/Help/2464a180-e5dc-45d1-a2b8-3c8a 2b571e9d1033.mspx
http://www.mydigitallife.info/2007/05/25/how-to-take-ownership-and-grant-permiss ions-in-windows-vista/
It might also be worth checking permissions on iTunes Library.itl and iTunes library.xml in the iTunes folder.

Mac + Windows Media Center

I currently have both a pc and a new Macbook. On my pc i use Windows Media Center to record tv shows that i've missed. I'm able to network the two computers to view and share files however i can't play the recorded shows on my Mac. I see them in the shared file but its not opening it. It says "Error opening movie". Can anyone please help me? I'd really like to watch my recorded shows from my Mac laptop and not have to be stuck behind my pc. Please Help???
Thanks

You need to export the Media Centre recordings into a format which will be viewable on the Mac.
Taken from the Media Portal Forums
Here is a quick guide to strip off the ASF wrapper MS use for their DVR-MS file format. This is used in MediaPortal for recording with MPEG-2 capture cards like the Hauppauge PVR-250 / 350 models.
What you need to have...
1. Graphedit http://www.digital-digest.com/dvd/downloads/graphedit.html
2. Cyberlink DirectShow filters MPGMUX.AX & CLDUMP.AX (You'll have to find these)
What you need to do...
1. If not done already register the two filters listed above from the directory where they have been installed.
regsvr32.exe MPGMUX.AX
regsvr32.exe CLDUMP.AX
2. Start Graphedit and the click 'File' then 'Render Media File'
3. Choose the *.DVR-MS file you wish to make into a *.MPG equivalent.
This will automatically build a Graph ultimately providing an output to the Video Renderer and Default DirectSound Device.
4. Remove all filters except the *.DVR-MS output box.
5. Click on 'Graph' then 'Insert Filters' within Graph Edit.
6. Go to the 'Direct Show Filters' section and add 'Cyberlink MPEG Muxer' (MPGMUX.AX) to the Graph.
7. Now add the 'Cyberlink Dump Filter' (CLDUMP.AX) to the Graph and it will prompt for a filename give it a name with a .MPG extension. i.e. Test.mpg.
8. Leave the Filter addition window and connect the DVR Out-1 connector to Audio In on the 'Cyberlink MPEG Muxer' on the Graph.
9. Also connect the DVR Out-2 connector to Video In on the 'Cyberlink MPEG Muxer'
10. Next connect the Output pin from the 'Cyberlink MPEG Muxer' to the 'Cyberlink Dump Filter'
11. You are now ready to get your MPG equivalent file click on 'Graph' and then 'Play' (or click the green play button)
12. You'll notice a green progress indicator moving from left to right. Once complete you will have successfully dumped your MPG file in the same quality it was recorded without re-encoding!!!
Note: The MPG file should be slightly smaller the the original. Don't worry if they are not exactly the same size as we have stripped off the ASF guff.
You can do what you want with the MPEG file. i.e. Convert to AVI, Deinterlace it, Crop It, Resize it, Burn it to DVD/SVCD...etc etc
It worked fine with the two files I tried, but I then ran out of time to try doing something with the resulting MPG files. As I was using RDC to connect into the Media Centre, even playing them wouldn't work as expected. I did try VirtualDub but it didn't like the mpg file, but I am not sure if this was a RDC issue or an issue with the mpg files.

Windows Media Center - iTunes

So my library is in beautiful working order in iTunes. I've got an Xbox 360 though and wanted to play mp3's, show pictures, and videos, etc, so I linked it up via Windows Media Center. My mp3's still play fine Microsoft based products, but will no longer play in iTunes. NO they have not been converted to another file format. They are still mp3 files, and I've manually opened them via Windows Explorer in both players and it only works in Windows media player.
I don't get any error messages in iTunes, you just hit play and it doesn't do anything.
Luckily I backed up all my files and when I restored them they play fine again in iTunes, so Windows Media Center is doing something to them.

Not to my knowledge. Media Center's music functions are essentially a wrapper around Windows Media Player - whatever you can play through WMP and add to its library is accessible through the Media Center UI. Unfortunately this does not include your AAC and M4P files. There are some freeware and commercial decoders out there that will enable AAC playback through WMP (www.rarewares.org/aac.html, www.3ivx.com), but for any protected files you're out of luck.
As for front-ending iTunes through Media Center, the HP interface you refer to is the only one I know of and frankly it's not very good. You might try The Green Button forums, a quick search turned up at least one likely thread.

Envy 23 Protected Content Error in Window Media Center

I have a brand new HP Envy 23 with Windows 8 and Intel HD Graphics. I run Windows Media Center and have an HD Homerun Cable Card TV Tuner attached on my network so Media Center can redord HD Cable programs.
Recorded programs play back fine to my XBOX360 Media Center Extender, however, if I try to watch a recorded show on the HP Envy (which is the machine doing the actual recording) I get an error message that the Display Device Does Not Support the Playback of Protected Content.
I was hoping a display driver update might fix this, but I don't see any available. Since HP offers this machine with a TV tuner, and with Blu-Ray, I would think the Intel HD Grapics Hardware and the display would support HD playback.
Has anyone else encountered this, and found a solution?
Thanks!

Hi jfmcgowan,
I have been researching the problem that you are having and came across several other people that were having the same problem. The closest thing that I could find to a solution was the link below. It is regarding Contect Protection Messages Interrupt View of High Definition Movies. Try that out and let me know.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01530801
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

I prefer Windows Media Center (but I would like to use Front Row)

This is a plea to Apple that they would update Front Row with some more functionalities!
I'm using my Mac mini as a HTPC and it's doing it's job absolutely great - thanks to Windows Media Center.... Awwww, I wish I didn't have to write that
Well, it's all about functionality and at that point, I have the conviction that WMC is really kicking FR's a**. I really don't get why Apple has chosen to put a media center software (don't know if I dare to call it that) in their OS which lacks of so many important functions.
One of the important things for me, in a media center software, is support for TV tuners, and guess what... Windows Media Center has this, but there's no support in Front Row.
I would also like to see more integration with iTunes, so that I can use the Remote app on my iPhone to control the music in FR and so it's possible to use the party function (also with the Remote app, cause that works really great).
This is only some of the functionalities I miss in Front Row, but I do hope that Apple will consider those so I can get rid of Windows from my machine.
//Cheers

Best way to convey your wishes to Apple is to send them feedback.
Where to send product feedback to Apple:
http://www.apple.com/feedback/

Playing YouTube on Windows 7 Media Center

Similar Messages

Maybe you are looking for