Playlist empty when connected to car system
Since upgrading to iOS6.0, though the songs in my iTunes playlist show up on my iPhone 4S, whenever I connect the phone to my Hyundai system, the playlist becomes empty. The only songs I can play are the ones that are not in the cloud. Didn't have this problem pre-iOS6.
Hi vance23! Other than this trouble with the bluetooth, I hope you're enjoying your new phone. Our customers' safety is very important to us, so I'm glad you're trying to use your hands free options. Many times, third party bluetooth devices may have compatibility issues with certain types of bluetooth devices that haven't been tested. Since your HTC is successfully finding and pairing to the stereo, that leads me to believe it may not have been tested to work with the 4G LTE Incredible. Have you checked with the manufacturer of your aftermarket stereo to see if it's compatible with the 4.0 bluetooth wireless technology in your new phone? Is the phone able to place and receive calls when not connected to your car bluetooth? Have you tried any other bluetooth accessories?
We have lots of great bluetooth accessories that are compatible with the new 4.0 technology at http://bit.ly/Xd7EZi if you'd like to take a look at a few other options too.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport
Similar Messages
-
Iphone 5 doesnt display contacts when connected to car
My Car doesnt display my contacts in my phonebook when connected via blutooth to my car??
What do you mean it does not display them?
Are you saying that they "disappear" when the device is connected via Bluetooth to the car?
Are you expecting them to automatically display on the screen when connected via Bluetooth?
Are they not displaying in the address book visible/accessible in the car's Bluetooth system? -
Wheel mostly unusable when connected to car
Hello, for years, I used a third party connector which connects my ipod to my car stereo. I recently upgraded to a 80g Classic from my old 40g, and I find whenever I try and use the wheel, it barely works when connected to the stereo. When I disconnect the iPod, the wheel goes back to it's normal sensitivity and works fine. I've tried reconnecting my old 40g, and that still works fine. Anyone have any idea why this might be? Thanks!
If you are connecting via the dock connector, then I'm surprised that you say the 40Gb iPod wheel works when connected. Usually, control of the iPod is from the car stereo's controls, not always complete control though.
My sister-in-law's 2007 two-door (sport) Mazda will only play from the first five playlists by selecting the "preset" buttons on the car stereo via the Mazda iPod interface. But my 2006 Mazda 3 will play all Songs at random, providing that I set the iPod to do this before connecting via a third party connector. My car did not come with a built-in interface.
So the answer may be simply that the your Classic iPod does not like the car stereo's interface as much as the 40GB iPod. Try experimenting b setting the iPod before connecting as I do. It's a compromise, but at least it's my choice of music, not some radio station executive.
Good luck. -
"Comm Error" message when connecting to car stereo
When connecting my 80G IPod to the port in my car, the IPod screen rolls horizontally, then says "OK to disconnect", and the stereo displays the "Comm Error" message. I was able to connect to the stereo before but don't know what happened to cause this. Re-setting the IPod did not resolve the problem. Has anyone else seen this? Please help!
5th Generation IPod Windows XPI’ve got a 30gb ipod doing the same thing. I know it’s not the car as my friends nano works fine on it. Have you have any success?
-
TS1425 iPod nano - loses functionality when connected to car radio
For the past week, when I connect my iPod nano (4th generation) to a car radio (and I've tried it in several) it brings up a splash screen of the radio manufacturer which stays on the iPod screen and prevents any further access to the iPod functionality. This only happens when connected to a car radio, otherwise the iPod functions normally. So in effect, the iPod is unusable when connected to the car radio, which is where I do most of my listening. Anyone know how to help eliminate this problem?
It sounds like a battery issue to me. When you connect it to the PC it draws power from the computer and thus it is able to function. Apparently it doesn't have enough of its own juice anymore. You probably just need a new battery.
-
HT201401 no music audio through headset when connecting to car or stereo
hello, Im not getting any music audio through the headset when connecting to my car or stereo I can hear iPhone noises though. I'm not having the same problem with iPhone earphones but dont think its lead compatability as both leads have worked fine until yesterday. i have tried updating and resetting my phone and no joy. Any ideas please as this is quite frustrating?
as stated then the ios devices does not support connecting by usb to anything but a computer or the ac charger
it does not work with usb mass stroage driver which devices such as stereos which have usb conenctors rely on
the rest of the smartphones and tablets is quiting that feature too
suppose they all feel the disc mode is too often used for copying media between people without the rights to play it -
IPod plays same song sequence when connected to car.
Hi everyone,
When I connect my iPod to the USB port in my car, it plays the same songs in the same order every time. Is there a setting that I don't know about? It doesn't do this when connected to my computer or when used for personal listening. I have had no other issues when it's connected to the car. The sound quality is wonderful. I had my sister connect her iPod and we got the same result.
Thanks for your help!
ChristineWhen using in the car, is "Shuffle" selected?
-
IPhone 4: Since iOS5 Bluetooth issues when connected to car hands free and audio system
Hi @ all,
this discussion is either a kind of "warning" for those who hadn't yet updated to iOS 5 and a beg to Apple for fixing the issue:
Obviously the iOS 5 does have some problems with VW and Ford (germany) modells equipped with handsfree and audio systems (googling a little bit resulted in many, many complaints in german discussion forums about it). Unfortunatelly I'm facing these problems now too:
Issue 1:
When the iPhone is connected to the audio-system of the car via Bluetooth, the Audio Slider on the iPhone doesn't work any longer. The only thing that it is capable to do is, if you slide it completely to the left, which results in switching the audio completely off.
Issues 2 (much more annoying):
When the iPhone is connected to the handsfree system of the car, the ringtone volume is obviously set to "off" or at least "extreme low". This doesn't harm when using the phone with the handsfree since the ringtone still is coming from the cars loudspeakers. But as soon as you leave the car and the bluetooth connection is disconnected, the ringtone audio on the iPhone is STILL set to "off". Means: Each time, when you leave your car, you have to increase the ringtone volume manually.
Issue 1 is more a "not nice" or a "OK, it's first release" bug. But issue 2 would have been a reason for me to wait for upgrading to iOS 5, since I'm using my iPhone as a business tool and am quite frequent on travel.
To verify that I hadn't had a bug when upgrading for the first time my iPhone, I completely set my phone back to factory default, put it in maintenance mode and re-flashed it completely anew using iTunes. I only performed minimal setup to make sure, nothing else could cause this. The issue still remained, therefore it was clear to me, it is iOS 5. I never had any of these issues with iOS 3 und 4. A probable "workaround" would be a downgrade, but this doesn't work, as known, either.
@ Apple Engineering: Please fix this as soon as possible!
Cheers,
FrankGood question... I haven't found a "reliable" way of sending constructive(!) Feedback to those at Apple who really care. I remember the beginning days of Mac OS X, when the reply-link was even on top of the dock.
Maybe I'm just not aware of working feedback channels, I only can hope that some of Apple's people with "influence" read statements like this...
Cheers,
Frank -
IPhone with iOS 7.1.2 cannot connect with car system
Hi,
I am using iPhone 4s with iOS 7.1.2 . I used to connect it with my car (fiat bravo, with blue&me system) and it has worked well, but it was still on iOS 7.1.1. Now it doesn't want to connect with the car, phone sees the car, but cannot connect with it. How can I solve this?Hello, Brunon_Wayward.
Thank you for visiting Apple Support Communities.
Sometimes when an iOS update is released there is a compatibility lag with certain features that requires an update to the vehicle. I would first check with your vehicle manufacture for any firmware updates. However, here is an article that has some helpful troubleshooting steps regarding car stereo connections and an iOS device.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Cheers,
Jason H. -
AS 70SR2 (WP's) stops when connecting to upgraded system.
Hi,
I have installed an application server (NW7.0SR2) for our new ECC60 sandbox, which is upgraded from 4.6C. The AS and the DB server are on 2 different hosts.
When I try to start the AS it seems to work but the processes dies. The AS server is 64bit W2K3 ENT SP2 R2 with 12GB RAM.
I would really appreciate some input:)
Here are the trace files dev_disp and dev_w0
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid S23
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 179
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 2808
Fri Oct 03 12:39:57 2008
kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2808) [dpxxdisp.c ; 1285]
shared lib "dw_xml.dll"; version 179 successfully loaded
shared lib "dw_xtc.dll"; version 179 successfully loaded
shared lib "dw_stl.dll"; version 179 successfully loaded
shared lib "dw_gui.dll"; version 179 successfully loaded
shared lib "dw_mdm.dll"; version 179 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 36000
Fri Oct 03 12:40:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c ; 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dksnss23ap3_S23_01 <
DpShMCreate: sizeof(wp_adm) 11024 (1224)
DpShMCreate: sizeof(tm_adm) 5283968 (26288)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D7B0050, size: 5941072)
DpShMCreate: allocated sys_adm at 000000000D7B0050
DpShMCreate: allocated wp_adm at 000000000D7B1C90
DpShMCreate: allocated tm_adm_list at 000000000D7B47A0
DpShMCreate: allocated tm_adm at 000000000D7B4800
DpShMCreate: allocated wp_ca_adm at 000000000DCBE880
DpShMCreate: allocated appc_ca_adm at 000000000DCC2F00
DpShMCreate: allocated comm_adm at 000000000DCC4670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DD4B2F0
DpShMCreate: allocated gw_adm at 000000000DD4B370
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DD4B3A0
DpShMCreate: allocated wall_adm at 000000000DD4B3B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Oct 03 12:40:02 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( dksnss23) [dpxxdisp.c ; 12408]
DpStartStopMsg: send start message (myname is >dksnss23ap3_S23_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c ; 1050]
Fri Oct 03 12:41:02 2008
ERROR => DpWPCheck: W0 (pid 1680) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W2 (pid 720) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x89 --> 0x88
ERROR => DpWPCheck: W4 (pid 2212) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W5 (pid 1908) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W6 (pid 1136) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x88 --> 0x80
ERROR => DpWPCheck: W8 (pid 888) died (severity=0, status=0) [dpxxdisp.c ; 15534]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:12 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Oct 03 10:41:12 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1680 Ended no 2 0 0
1 DIA 2152 Ended no 1 0 0
2 DIA 720 Ended no 2 0 0
3 DIA 2556 Ended no 1 0 0
4 DIA 2212 Ended no 2 0 0
5 DIA 1908 Ended no 2 0 0
6 BTC 1136 Ended no 2 0 0
7 BTC 1284 Ended no 1 0 0
8 BTC 888 Ended no 2 0 0
Dispatcher Queue Statistics Fri Oct 03 10:41:12 2008
===========================
--------++++--
+
| Typ | now | high | max | writes | reads |
--------++++--
+
| NOWP | 0 | 2 | 2000 | 11 | 11 |
--------++++--
+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--
+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 11, udp 9 ( 81%), shm 2 ( 18%)
since last update total 11, udp 9 ( 81%), shm 2 ( 18%)
Dump of tm_adm structure: Fri Oct 03 10:41:12 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Oct 03 10:41:12 2008
=============================
Slots: 300, Used: 1, Max: 1
--------++--
+
| id | owner | pid | eyecatcher |
--------++--
+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:17 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dksnss23ap3_S23_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2812) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2812 HANDLE:512)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2812 HANDLE:512)
wait for end of icman
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2764 HANDLE:520)
DpStartStopMsg: send stop message (myname is >dksnss23ap3_S23_01 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Oct 03 12:41:21 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c ; 12754]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 524 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 524 (pos=2)
SiSelNRemove: removed sock 524
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 17)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 524
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2808) [dpxxdisp.c ; 10952]
Good Bye .....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Oct 03 12:40:02 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\S23\D01\exe\dboraslib.dll' is "700.08";, patchlevel (0.107)
B New connection 0 created
M sysno 01
M sid S23
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 179
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 1680
M
M kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c ; 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11024 (1224)
M DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7B0050, size: 5941072)
M DpShMCreate: allocated sys_adm at 000000000F7B0050
M DpShMCreate: allocated wp_adm at 000000000F7B1C90
M DpShMCreate: allocated tm_adm_list at 000000000F7B47A0
M DpShMCreate: allocated tm_adm at 000000000F7B4800
M DpShMCreate: allocated wp_ca_adm at 000000000FCBE880
M DpShMCreate: allocated appc_ca_adm at 000000000FCC2F00
M DpShMCreate: allocated comm_adm at 000000000FCC4670
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000FD4B2F0
M DpShMCreate: allocated gw_adm at 000000000FD4B370
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000FD4B3A0
M DpShMCreate: allocated wall_adm at 000000000FD4B3B0
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Fri Oct 03 12:40:03 2008
M ThInit: running on host dksnss23ap3
M calling db_connect ...
C Prepending D:\usr\sap\S23\D01\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c ; 438]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App : disp+work.EXE (pid=1680)
When : 10/3/2008 12:40:3.953
Threads : 2
Computer Name : DKSNSS23AP3
User Name : s23adm
Number of Processors: 2
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id bf8
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
0000000006bdf7f0 000000001003be46 000000001015b000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
0000000006bdf860 000000001000397d 0000000006bdf8b0 dboraslib!_tailMerge_OCI_dll
0000000006bdf8c0 00000000100208a8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2823)]
0000000006bdfa90 0000000001241037 0000000006bdfd80 dboraslib!DbSlConnect [dbsloci.c (1860)]
0000000006bdfce0 000000000124146e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
0000000006bdfd50 000000000124462e 00000000ffffffff disp+work!supply_con [dbcon.c (3835)]
0000000006bdfd90 0000000001236e6c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
0000000006bdfdf0 00000000004cb61f 00000000094d4ba4 disp+work!db_connect [dblink.c (422)]
0000000006bdfe80 00000000004dd569 0000000006c5cb7d disp+work!ThInit [thxxhead.c (1442)]
0000000006bdfeb0 000000000042f93b 000007ffe3920000 disp+work!ThStart [thxxhead.c (1142)]
0000000006bdfee0 000000000040109d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1164)]
0000000006bdff10 000000000199e0c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000006bdff70 0000000077d5964c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
0000000006bdffa0 0000000000000000 000000000199df50 kernel32!BaseProcessStart
State Dump for Thread Id 63c
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000d79fe40 0000000077d5f691 0000000006c1e1a0 ntdll!NtFsControlFile
000000000d79feb0 00000000018886df 0000000000000000 kernel32!ConnectNamedPipe
000000000d79ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000d79ff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000d79ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Fri Oct 03 12:40:04 2008
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M pid = 1680
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dksnss23ap3_S23_01 on host dksnss23ap3 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Fri Oct 03 12:40:04 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10754
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c ; 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c ; 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c ; 333]
M return from clean-up function ...You said your "AS server is 64bit",,, but the error on dev_w0 talks about Kernel32...
Maybe thats the problem
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
Regards
Juan -
Error when connect from portal system (abap ) to external ssl client - sm59
Hi I am tryign to setup a ssl connection from the abap sm59 portal system to an exteral server.. I have setup the certs that the client has given me in strust.but i m gettign the ffg error.
sysno 60
sid PID
systemid 370 (Solaris on SPARCV9 CPU)
relno 7110
patchlevel 0
patchno 150
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile /usr/sap/PID/SYS/profile/PID_DVEBMGS60_pidevdb
pid 3911
[Thr 01] Thu Jun 14 08:38:48 2012
[Thr 01] TRACE FILE TRUNCATED
[Thr 07] Thu Jun 14 08:39:07 2012
[Thr 07] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 07] session uses PSE file "/usr/sap/PID/DVEBMGS60/sec/SAPSSLA.pse"
[Thr 07] SecudeSSL_SessionStart: SSL_connect() failed
[Thr 07] secude_error 536871970 (0x20000422) = "SSL record with the wrong SSLPlaintext.version received"
[Thr 07] >> Begin of Secude-SSL Errorstack >>
[Thr 07] ERROR in ssl3_get_record: (536871970/0x20000422) SSL record with the wrong SSLPlaintext.version received
[Thr 07] << End of Secude-SSL Errorstack
[Thr 07] SSL_get_state() returned 0x00002120 "SSLv3 read server hello A"
[Thr 07] SSL NI-sock: local=57.24.111.151:34110 peer=57.24.110.116:5081
[Thr 07] <<- ERROR: SapSSLSessionStart(sssl_hdl=10720d530)==SSSLERR_SSL_CONNECT
[Thr 07] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00020a7c} [icxxconn_mt.c 1957]
When i change the sm59 connection not to use ssl. it give me a pop up screen . and asks me to enter user and password...
He then give me a private key file .. i.e a .pfx file but not sure how to load this in strust. I tried to convert in useign sapgenpse. but it fails with teh ffg error
12% sapgenpse import_p12 -p /usr/sap/PID/amos/amos_client.pse /usr/sap/PID/amos/amos_client_pk.pfx
import_p12: MISSING password for PKCS#12 file "/usr/sap/PID/amos/amos_client_pk.pfx"
Please enter PKCS#12 encryption password: *******
PKCS#12/PFX file contains 1 keypair:
1. FriendlyName = "amos.server.interface.webuser.web_int.cert"
X.509v3 (type=Both) RSA-2048 (signed with sha1WithRsaEncryption)
Subject="CN=AMOS WebService Interface Client, OU=IT&S MRO, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
Issuer ="[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
ERROR: Incomplete certification path -- NEED certificate of "[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"!
I have attached a doc of what it looks like.. appreciate any helpHi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh -
Audio Output problem when connected to car port
Just switched to an iPhone 4 from the 3G model. When I play any audio (music or Pandora)while connected to my car port, I get bits of noise at timed intervals coming throught the speakers. I would say it is about every 2-3 seconds I get this little added noise sample added to the audio stream. My old phone and ipod classic work great so I know it is not the car deck. The headphone mini connector produces clean audio.
Anyone else have this?
This in addition to the other problems that seem to be inherent in this new device has me thinking about returning the phone tonight.Well it turns out a hard reset of the phone did fix the audio. My car stereo installer told me to do that and it worked!
-
Music plays automatically when connecting to car w/USB, and I don't want it to!
I have an iPhone 4s. I am using an app call RSS Radio to download and play a podcast to which I subscribe. I use this frequently in the car, connecting to the car radio with USB. My music player comes on automatically whenever I conncet the USB cord, and also when the podcast is stopped for any reason. For example, when reaching the end of the podcast the music comes on. When the phone rings, the music comes on, and I am unable to hear the caller. This problem also happens when I am playing the Boggle app...as soon as I open the app, the music comes on. I have to manually go into the music app and stop the song from playing, or re-start the podcast. I don't see any settings that let me adjust anything. Can anyone help me with a way to stop this music from coming on unless I actually go to it and play it intentionally? Thanks!
It's been about a year since I asked this question... I hope someone has an answer because it is such an annoying problem! I have been reluctant to upgrade to iOS7, does anyone think this could solve my problem?
-
BEx error when connecting to BW system
I get the error below when trying to connect remotely to BW 3.1 system using BEx Analyzer. I can connect successfully to the BW system using SAPLogon and BEx install appears to be correct. I connect successfully to BEx 3.5 and BEx BI sandboxes. Any ideas.
<----
>
Error Group
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=20 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=<...>, GWSERV=sapgw57, SYSNR=57
LOCATION SAP-Gateway on host <...>.com / sapgw57
ERROR partner not reached (host xxx.xxx.xx.xxx, service sapgw57)
TIME Tue Mar 27 06:23:23 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi.cpp
LINE 8724
DETAIL NiPCoIs the IP address correct? do you use IP address in your sap logon pad or hostname/servername ? do you maintain the IP mapping in 'host' file ? changed accordingly ?
also try to search if there are 2 'saplogon.ini' file, maybe the one with IP updated not used by BEx, try to overwrite with the latest one. normaly located in windows folder and program files\... \frontend ...
Hope it helps.
Regards -
Radio streaming apps crash in ios 7 when connected to car by usb
I wonder if anyone can help?
Up until ios7 I could connect my iPhone via a usb cable to the cars audio ( Vauxhall insignia) and listen to my music and also a streaming radio app it worked absolutely fine using 3G data or wifi.
However after installing iOs7, it connects ok, then the radio app loads fine, plays for about 20 seconds, trips out for a second, reconnects for a few seconds, then crashes, with the message on the dashboard " USB device not recognised".
The only way to get it to recognise is to disconnect the usb data lead & reconnect it.
When using the music app on the phone & data lead connected to the car audio it stays connected and works perfectly.
An ideas anyone please?try another usb port but usb is a poor way to charge the batt.
if you look under menu/settings/batt, at the bottom it says you won't show a full charge with usb charging.
i have the phone off & charge with wall adapter for 3 hours.
Maybe you are looking for
-
SSRS 2008 Chart legend colours not matching series colour.
Hi, I believe this issue has been raised before. In SSRS 2005 & 2008 R2 though I am yet to find a solution other than a lengthy (messy) workaround. I have a chart based on the following data: Data field - Count(ChangeID) Category - Change_Categorisat
-
Error message when updating tools
Hello, I received the following warning/error: In order to enable the BugsubmitterErrorManager, you must set the following system property in your IDE start script: org.openide.ErrorManager=org.netbeans.SBSErrorManager. Note that this setting is shar
-
Server Time Machine vs Client Time Machine
I have been running Time Machine on my iMac since I got it. I installed server and now I notice that the server app has Time Machine as well but its turned off. My oringinal Time Machine in system preferences seems to be running like it always has.
-
Video capture card to use with WebEx
Hi all, could someone share a list of compatible video capture cards to use in a PC in a WebEx session? The ideia is to use an external camera (instead of a web cam) to capture the video and I would like to know if this input will be sent as video
-
Hi there experts, so someone have an idea to get the out-of-sync summary from the RME in cisco works in an email (pdf eg.)? Well i thought to find an job to do so but well i think i am blind ... thx 4 feedback Rob