Playlist order for multiple albums incorrect

I've been trying to get this to work for a while and it just doesn't seem to work correctly. I have an educational program that is on 6 CDs with 7-12 tracks per CD. When I put all of them into a single playlist and make that playlist the only thing that should sync to my iPod, no matter what I've tried I cannot get the order correct. It always plays the first track from each disk, then the second from each, then the third from each...So just to try to be clear, this is what I get when I double click to advance to the next track:
D1T1 -> D2T1 -> D3T1 -> D4T1 -> D5T1 -> D6T1 -> D1T2 -> D2T2 -> D3T2...
How do I get it to play all of the tracks from CD 1 to play, then all the tracks from CD 2, etc?
The playlist has all of the tracks in the correct order, and I have tried clicking on "Copy to Play Order" on the playlist, but the iPod still screws it up.
Thanks,
Rob

Hi,
I guess that would make sense if the tracks were played alphabetically, either by CD or as a single collection, but they are getting played as D1T1, D2T1, D3T1...So the order is being imposed somewhere other than by looking at the names of the files. Plus when I actually look at the files on the iPod, the names don't make sense, e.g.:
For directory iPod_Control/Music/F00:
AHDG.mp3 CDOS.mp3 EANV.mp3 GKKZ.mp3 NDSQ.mp3 OTJR.mp3 RSRL.mp3 TOSX.mp3 TWSB.mp3 VRXZ.mp3 BAOF.mp3 CPJE.mp3 EEGJ.mp3 MNUB.mp3 NYHA.mp3 RITJ.mp3 RVCH.mp3 TVEV.mp3 UVFJ.mp3 XDGR.mp3
And if I then look at the ID3 tag information on the files, they're also all mixed up so that even if it played them alphabetically by these funky file names I would get an order other than the D1T1, D2T1, D3T1, etc.
Please remember that I am syncing a playlist. The list is correct both in iTunes as a playlist and when I look at the music and playlist when the iPod is connected to my Mac.
Incidentally, I had tried to rename all of the files as you suggested and it didn't change the behavior.
I also did a restore and re-sync'ed the playlist. But I still, when I skip to the next track, get the order: D1T1, D2T1, D3T1, etc...Since I'm trying to get to D1T7 it's a real pain because I have to skip through every disks track 1, then every disks track 2, etc...And when I'm done with D1T7 and want to get to D1T8 I'll need to skip through track 7 of disks 2-6 in order to get there...This is a real pain.
Any other ideas?
Thanks,
Rob

Similar Messages

  • Single Transfer Order for Multiple Handling Units

    I have been researchig the ability to create a single transfer order for multiple handling units.  My assumptions are if it can be done that:
    1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is different, that means different transfer order
    2) A TO can have multiple materials (line items) with different destination bins and quantities per bin
    I looked at the configuration for TO Split, but it's not clear that this will handle my requirement.
    I also saw this http://aq33.com/material-management/Articles-005798.html and it also says that my requirement can't be meant.  I'm just checking before I tell my customer this cannot be done.

    Yes you are right, if Source document is different, you need to go with different TO.
    But you can choose the Handling unit split, while creating a TO itself. i.e., You can quantify the goods for each handling unit.
    Edited by: Ganesh M on Feb 29, 2012 6:20 AM

  • How to create production order for multiple items having common raw materia

    Dear all,
    We are running a sheet metal fabrication company at Vadodara Gujrat.
    Please guide us how to create single production order for multiple items using single raw material??
    For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
    Right now we have to create 5 production order to produce above 5 items of single sales order  in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
    Kindly guide us how to solve the problem.
    Thanks.
    RUPESH  +91-9227744273
    WEB : www.gorasia.co.in

    Hi Rupesh Gorashiya,
    This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
    MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
    Thanks,
    Srujal Patel

  • VL06 / LT0S create Transfer Order for Multiple Deliveries

    Dear all,
    My customer is used to create a WM Transfer Order for multiple Deliveries with transaction LT0S. The group that is processed here was created with VL06 / subsequent functions/ Group / Create with WM reference / TO for Multiple Deliveries.
    -Currently I am trying to find a backway processing mode for this. Are Pickwaves a good alternative? Or will they generate TO' s per Delivery?
    -My concern is this: Creating ONE TO is essential to keep the the picking route. With multiple TO's I will lose this. Creation of the group mentioned in the menu path above requires manual input such as giving a name for the group and checking the checkbox TO. for Mult.Del.
    Thank you for your time.
    Sandeep

    Vinod,
    Thanks for taking the time.
    Have been able to have my Pick Waves generated in background jobs. However, not been able to process these Pick Waves in a single TO. Each delivery gets its own TO. So far Pick Waves have not proven to be an alternative to LT0s
    I have not been able to find a setting -like the checkbox in VL06 K Group with WM reference, TO for Multiple Deliveries- that enable me to have ONE TO per Pick Wave.
    Any suggestions?
    Thanks,
    Sandeep and Dave

  • How to create a B/D Order for multiple notifications?

    Dear Sirs,
      I would like to know how to create single order for multiple notifications of the same breakdown type.
    Is it allowed to do so what are the advantages and disadvantages of the same.
    Regards,
    M.Boopathy

    Dear Boopathy,
    You can create a Maintenance Order with Ref. to a main notification thorugh Order Create icon in transaction IW22.
    Once the Order is created, you can add remaining Notification in Object Links Tab in the Maintenance Order.
    This is the standard way of attaching multiple Notifications to a single Order.
    Kindly acknowledge if this answer helped.
    Do let me know if you have any other query in the same.
    Thanks.
    Regards,
    Avi

  • Get Info for Multiple Albums message (but only one was selected)

    Please can someone help? I was so full of hope when moving from Windows to the Mac but my hope is rapidly turning to despair.
    I have spent several hours putting many of my favourite music CDs into iTunes. All was going well, but suddenly when accessing the “Get Info” of a particular album in order to add Artwork I got a message like “Are you sure you want to get the information of MULTIPLE items” (my emphasis). (The error message may not be word perfect because I clicked the “don't show again” box and haven't seen it since.)
    But the point is that I definitely did NOT have multiple items selected. There is nothing I can now do to select “Get Info” for a single album, and as a consequence I will never be able to add Artwork again when necessary.
    I looked through the Internet and found references to the com.apple.itunes.plist. However although I can see this using Terminal I cannot find it using Finder! (Why not?)
    What on earth is going on? This is no better than Windows, and in fact rather worse: I tried to delete iTunes, since it is obviously corrupted in some obscure way, with a view to re-installing it. But I can't even do that because it is “needed by Mac Os x”!!
    Please can you help?

    davidfrombucks wrote:
    Please can someone help? I was so full of hope when moving from Windows to the Mac but my hope is rapidly turning to despair.
    I have spent several hours putting many of my favourite music CDs into iTunes. All was going well, but suddenly when accessing the “Get Info” of a particular album in order to add Artwork I got a message like “Are you sure you want to get the information of MULTIPLE items” (my emphasis). (The error message may not be word perfect because I clicked the “don't show again” box and haven't seen it since.) 
    If you get info on an album, it contssts of multiple songs so it is multiple items.
    But the point is that I definitely did NOT have multiple items selected. There is nothing I can now do to select “Get Info” for a single album, and as a consequence I will never be able to add Artwork again when necessary.
    You still can get info for multiple items. Checking the Don't show this again box simply stops iTunes from telling you that you have selected multiple items. It will still get info and edit the info for multiple items.
    I looked through the Internet and found references to the com.apple.itunes.plist. However although I can see this using Terminal I cannot find it using Finder! (Why not?)
    Because by default, Finder searches do not show system files.
    But the "problems" you are experiencing are not really problems (just not knowing how it works) and you don't need to mess with that file.

  • How can I combine orders for photo albums, to save on the delivery charge?

    I want to buy 3 different albums I created in iPhoto
    However, the programme wants me to buy each individually, and charges for delivery each time.
    How can I combine the orders?

    You can't.
    Regards
    TD

  • Bapi_po_create is not creating Purchase Orders for multiple records in file

    Hi All.
    iam trying to create contracts and Purchase Orders  In me21n,me31k .
    here iam using bdc for contract creation against services and using bapi_po_create for PO Creations.
    in this process i could create contracts and POs for the first record in the file but for second record bapi_po_create couldnt create POs and the return table in bapi says
    1.document contains no items.
    2.no services or limits have been maintained.
    wil be waiitng for  r great answer.
    bye.
    regards.
    seeta.

    Hi Seeta Ram,
    Did you pass the table PO_ITEM_SCHEDULES to BAPI_PO_CREATE with the coresponding Item numbers for each item in the table PO_ITEMS?
    Regards,
    Vitz.

  • Common internal order for multiple company codes.

    Hi All
    Can I have one statistical internal order which can be used at more than on Company code where controlling is common for all company codes.
    Thanks in advance
    reg
    S. Habib Pasha.

    Hi Sasi
    Thank you.
    I understand that Internal orders are Company code depended.  but,  at out client business, they need same internal order at difference comapany codes which are under one controlling area.
    Just looking, whether is there any possibility for same.
    reg
    S. Habib Pasha.

  • Looking for a way to change sort order for albums

    I know how to set the sort order for each individual song (Sort tab on song info), but is there a way to set sort order for multiple tracks?

    Please help!

  • Production order for a multiple materials codes...

    Dear...
    Could you please suggest me the SAP solution for the below production strategy.
    This production process is of heat treatment. Actually I am doing heat treatment of Cast and Forge items. These items weights are in the range of 150 kgs to 40000kgs. For example I am having a 40 tons heat treatment furnace. So at a time I can load the materials upto 40 tons. I am having different materials of different sizes and chemical compositions.  But heat treatment cycle(Routing) is same. So I can load different types of materials i.e. upto 40tons for the heat treatment for which same type of heat treatment is required. Sometimes this may be a single item .. if the weight of the items is 40 tons. If it is single item...then there is no problem. If I am loading different items...and if execution process is same for all the items, then how can I map this in the SAP. So that I can create a single order for different Items of different materials and quantity. I need to do the confirmation of these items with respect to the same item. Please suggest me...how can we map this scenario into the SAP.
    Thanks in advance.
    Regards,
    Surya.

    Hi surya,
    As per the heat treatment process concern, total cycle time is constant, and load is also constant (if we havenot changed).
    i hope u have defined workcenter formula and routing accordingly.
    i think creating single production order for multiple material is not possible, instead of thsi, i would suggest one way,
    > Since u have to maintain stock for Heatreated items, create sepearte Material code for each item to be heatreated.
    > Create BOM ,Routing  for New Material code.
    > Acitvate Batch management for New Material Code has been created.
    >Now create Production order for each material to be processed in one cycle, Assign the Batch Number manually.Batch number repersents your Heat treatment cycle number and same can de used for traceability.
    >Confirm the each order seperately, Now the Heatrement process cost will be updated and stock will be posted to heatreated storage loaction.
    But i am worrying about capacity planning and scheduling, For my knowlegde purpose i would like to know your existing scenoria, like workcenter formula and  routing operation values has been assigned , if u wish plz share with us.
    Please come back with your ideas..
    regards
    Pradeep

  • Controlling Post Order of Multiple View Objects

    Hi ,
    Here is the scenario:
    I have a use case of "Creating an Abstract"
    Steps:
    step1 ) (Page 1) Author presents the details of the abstract (Details goes to 2 tables ABSTRACT & ABSTRACT_CONTENT tables). For the 2 tables i have 2 entities. I use a view here called CreateAbstractView from both the tables( here i control the post order of the entities ....code from jdeveloper 11g guide)
    Step 2)(Page 2) Author presents details of Additional Authors. I use the view (*AdditionalAuthorDetailsView*) (Details goes to 2 tables AUTHOR & ABSTRACT). Here in the abstract table i have a parent key(parent abstract id) So all the additional authors has a record in Abstract table with parent_abstract_id from step1. ABSTRACT table also has a foreign key (author_id) .Here also i control the post order of the 2 entity object using the code from jdeveloper 11g guide.
    I also have a link from CreateAbstractView to AdditionalAuthorDetailsView (abstract_id in Abstract table from CreateAbstractView to parent_abstract_id in Abstract table from AdditionalAuthorDetailsView )
    If i have a commit on both the pages , i don't see a problem.
    But i want to have a commit process at the end so that the user can review the information. So when i try to add a commit process at the end , i get a exception (Parent Key not found exception) which i came to understand that commit from AdditionalAuthorDetailsView is happening first which is trying to insert a record into ABSTRACT table and cannot find the parent_abstract_id.
    How do i control the post order for multiple view objects in such scenarios?

    Hi!
    Please take a look at the dev guide. It comes down to controlling the posting order on entity level.
    http://download-uk.oracle.com/docs/html/B25947_01/bcadveo007.htm#CEGJAFCF
    Sascha

  • Manual TO for multiple materials

    Hi All,
    I want to create manual transfer order for multiple materials in a single TO, but when I use LT01 I have the option of entering only one material code. So, please tell me how can I create a transfer order with multiple material codes manually...
    Thanks in advance..
    Reg
    Noopur

    Hi,
    In standard system you can use only LT01 and LT10 for creating manual TO. In LT10 you can select several materials (quants) at once (but e.g. you cannot change the quantity).
    If you want something better, you have to go to development in my opinion.
    Regards,
    Csaba

  • View Photos Manually for MobileMe Album

    Hi All.
    I was given a nice suggestion about how I can order my images in an Album Manually before posting to MobileMe so that they show up in some kind of coherent order.
    Is this simply to go into the Photos view, get into the Album that I wish to order images within, and do View > Sort Photos > Manually?
    I am trying this and it appears that the Album titles disappear and I get a display of /all/ my photos instead of simply the ones that I wish to order for the Album I am going to be posting. I can't order all my images because there are way too many.
    If I go into Events view and open and Album it won't let me select "Manually" as it is greyed out.
    Is there a good way for me to display images in some kind of coherent order in MobileMe?
    Thanks,
    Jonathan

    Is this simply to go into the Photos view, get into the Album that I wish to order images within, and do View > Sort Photos > Manually?
    No.
    The trick is to create an Album (File -> New Album) add the pics you want to upload to that Album (Drag and drop them from the Library to the Album in the Sidebar) and then order them as you want. Then upload that Album to MM
    Regards
    TD

  • One song, multiple albums

    Hello all, I don't know if this is possible, but here goes.
    Over time you accumulate the same track a few times from different sources, and that's all well and good as you want the full album or compilation.
    My question is: is it possible to tag one of these tracks for multiple albums, and therefore being able to delete the duplicates, so only the one file is referenced from multiple albums?
    Many thanks in advance for any info.

    Well, no, it realy isn't possible.
    The way iTunes "knows" the track is by some data kept inside the actual file called "ID3" tags. So any single instance of the MP3 file (or AAC, etc) can only have one set of identifying ID3 tags, and thus can only show up in one place in your iTunes library.
    If you have the same tune in multiple places in your iTunes library, then those places reflect multiple sets of ID3 tag information, and those must be in separate files.
    It didn't/doesn't actually have to be that way: there is no reason the tags couldn't have multiple "title", or "album" or other information, but the demand just isn't high enough for such sophisticated behavior for Apple or any other MP3 player to worry about such details.
    And anyway, are you sure they are the same? "Best Of" compilations frequently do some remastering, so even if it has the same length and sounds mostly the same, it might not be precisely the same sets of sounds.
    Anyway, the size of a single audio file compared to the size of disks these days really means this would only matter to folks with borderline obsessive/compulsive disorder. Perhaps you should worry about something more meaningful ?
    \[Disclosure: the only reason I know this is that the same problem irritates me ]

Maybe you are looking for