Playlist Problems - Keeps Resetting

Hi guys,
Every time I start a new run and choose my playlist, it starts from the start. I want it to begin from the last played position. How do I make it do this?
My playlist is very long and I dont particulary want to split it up into smaller playlists.
Thanx!

Same issue and it's annoying. I even try to shuffle the playlist, but then when I press shuffle, it shuffles ALL my music, not just that playlist. Any suggestions?

Similar Messages

Serious iPod problem (iPod keeps resetting)

I've had my iPod for almost 2 years and until now everything worked fine. i listen to it on average 1 hr each day, and until 2 days ago battery seemed fine (I would recharge it each week, though it would be only half empty).
So 2 days ago I was listening to music, tried to go forward and all of a sudden it stopped playing music, it was just frozen. I reset it and it came back with a "sad" iPod icon. Ocassionaly it would end up with the icon as if the battery is dead. I reset it a few more times and mostlt I got the same "sad" icon and only a few times the battery icon.
I than tried to hook it up to my computer via USB and it would just reset and PC/iTunes would not see it.
Since I've had it for 2 years I thought maybe the battery has gone bad (but does it happen just like that without any signs?) so I tried to charge itbut when I connect it to charger it keeps resetting.
I than tried to force it into disc mode and that worked but as soon as I connected it to my computer it would reset. Even when I tried to charge it in disc mode it would reset after a few secunds.
So, if left alone it is in off mode, but if I push any button it starts up, and eventually shows the sad iPod icon. If plugged into the charger or PC it keeps resetting.
I have no way to get into it and update the iTunes, or access iPod. Has anyone seen this? Does is sound like a battery or is it something worse? I am out of warranty and would not want to spend too much money fixing it since it probably does not worth much, though i wish I could save my iTunes collection...

Hey guys, I'm having a similar problem though a slight variation on a theme. maybe you can help me out.
I have a 4th generation iPod (20 Gig) and it told me my ipod battery had died, so i plugged it into my computer to charge. It started out showing me the large symbol of the battery with the lightening bolt until there was enough to power the iPod so that it could run with iTunes. Except once it finally had enough power and interacted with iTunes it went into a black and white mode instead of the normal color mode and the the battery icon up in the top right corner was black with the lightening bolt. I got the normal "do not disconnect" message except that was black and grey as well.
I figured i'd update my ipod as it was still charging and added a new playlist and it appeared to take the music, but when I unplugged the ipod it showed me the icon of the folder with the exclamation point and gave me the address http://www.apple.com/support/ipod. Since i didn't have time then i reset it and then plugged it in via a car charger to see if charging it would fix the problem. Unfortunately, when I unplugged it from the computer to take to the car and reset it, it started rebooting over and over. I was able to force it into disc mode so that it would continue to charge without wasting so much battery rebooting (it didn't reboot in disc mode) and continued to work on it when i got home.
At home i tried every fix they have listed on the site and in my ipod handbook and nothing has worked. I have reset, restored twice, and charged the battery. The weird thing is that it
1) is recognized by itunes
2) just turns off if i try to use the charger
3) appears to be able to download music to it but makes a clicking noise
4) since it doesn't recognize the charger I can't finish the restore process
5) still gives me the folder icon when it tries to turn on
PLEASE HELP IF YOU CAN!
If you can think of anything i can do to fix this I will be so appreciative.
Thanks guys!

Smart Playlist Problems (Since Ver 5)

I have come across a problem, which I believe started when I installed Version 5.
I have many SMART playlists set up that are really for my iPod usage. They are set to pick certain tracks that have not been heard in xxx amount of days, and usually set to a certain number of songs, or a particular amount of time.
The ones I use most often:
SLEEP MUSIC - a playlist of random songs not played in the last 5 days limited to 90 minutes. I listen to this when I go to bed.
WORK MUSIC - a playlist of 100 random songs not played in the last 5 days. I play this through my inMotion dock at work.
Previously, all the smart playlists worked fine. When the songs were played, the playlist would update on the iPod and the next time I would enter that playlist on the iPod, the tracks would be different.
It still works this way as long as I don't connect my iPod to my PC and sync with iTunes. If I do, it always resets the iPod playlists to the songs that appear in the iTunes library. I rarely use these playlists on the PC, so they almost always stay the same.
It seems like in previous versions, iPod would update the iTunes library and the smart playlists would also be updated in iTunes, so that the iPod versions of the playlists would continue to be random. But now, if the playlist is different on the iPod, it will not transfer over to iTunes. Instead, the iTunes playlist is copied back over to my iPod, and I keep getting the same playlists over and over.
This is a major annoyance, as I usually sync my iPod every day since I am constantly updating my library.
I've also noticed that when I synch my iPod, it is copying over songs that are already there, and it always seems to be copying songs I recently played in the iTunes library.
I know that if the tag info is changed, or I add album art to a track, it will be copied over to the iPod again, but I am not making any changes to these tracks, just playing them in iTunes. I don't know if this is related to the smart playlist problem or not.
I thought about unchecking LIVE UPDATE on those playlists that cause a problem, but that doesn't work, as now I'd ALWAYS have the same playlist.
So, my next thought is to use the "Only update selected playlists" option in the preferences to exclude those playlists that have this problem. If I do this, will new music I add still be copied over to my iPod?
Has anyone else encountered these problems?
FYI - I have not updated to the latest iPod update because of smart playlist problems people were having. I have version 1.1 on my 60GB photo. Would updating perhaps fix this problem?
My bottom-line thought on this is that iTunes updates the iPod, but the iPod no longer updates the iTunes library as it previously did. My reasons for thinking this are 1) The playlist problems I am having as stated above, and 2) I notice when I change the ratings on the iPod, they are not changed in iTunes. I am going to do a test and change the rating on a track on the iPod, then I will synch my iPod to see if the track is updated in iTunes, or the file is copied back to the iPod with the old rating.

Reagrding tracks being copied over again, I've seen another post in iPod Lounge where that person indicated the same thing. He stated that the play count was not being updated between the iPod and iTunes, but that the tracks were being copied over again. This sounds like a good explanation of this problem.
I have now noticed many of the tracks which I know I have played in the past show a "0" play count. Are the play counts kept in the iTunes library files (iTunes.xml and iTunes.itl)?
I always save the library files, so that when I reinstall iTunes I can just copy these 2 files back to their proper locations and I have my entire library intact - playlists and all. My music library is on a different drive.
Anyway, I KNOW I have played these tracks on the iPod, and yet they show unplayed on iTunes. This is probably another symptom of the re-copying tracks problem.

Ipod will not charge, keeps resetting, extremely low battery.

Someone please help!!
I adore my Ipod, its 2+, it was working fine, till a few months ago.
In the beginning, it stopped charging on the computer, it synced, but i would have to charge in on a Ipod radio thing first.
Then after awhile, on the radio, (it worked perfectly at first) the ipod would come up with the message, "This accessory not supported by Ipod", it would still play on it, movies, songs, and charge it, but the message would come up every often.
Now it refused to be recognized by the radio, and won't charge.
(yet if you press play the song and movies will play)
It had very little battery left so i bought a wall charger.
I tried charging with a wall charger and car charger!
Now its basically dead, and when i plug it on to the wall charger, the apple logo comes on, and it goes to low battery message, then apple logo..again again.
It just keeps resetting, so i took it off that.
Leaving on the charger for awhile won't work, because it just keeps doing that.
What do i do?
I can't restore it, because i'd have to charge it first!
(I got a new battery for it a few weeks ago, the battery life was way better, charged a bit faster, and it seemed to work better, but the computer still drained it)
Anybody have any ideas?
Please please please.
I swear i love it, but i'm going to throw it out the window soon.
-edit,
just to add, the first thing that went wrong, that started this thing, was when i got that -48 error, it doesn't do that anymore just to add
Message was edited by: Imjustkeeding

I have the same problem and sent my ipod to a the service center for a battery replacement. I was informed by them first by email that "Our technicians have performed full diagnostic checks on your IPOD 5TH GENERATION and have been unable to reproduce the symptom(s) you reported when you requested the repair. As a result of our tests, we can confirm that your product meets Apple specifications for performance, usability, and functionality." then I was told over the phone that they reloaded the software and firmware and that it is working properly and is being sent back to me. Then, and heres the kicker, I received my i pod back with a form stating it was a hardware failure affecting another component. I have since called multiple times and no one can tell me where the hardware failure is but the ipod still says its a battery issue. Go figure i think apple knows exactly what the faulty part is that is causing this error and has no solution short of replacing the unit and they dont want to replace the units of all those with this hardware failure

Linksys WRT54GC keeps resetting

Out of sudden my Linksys wireless router started to reset a few times a day. This results in all customisations being lost and having default SSID without encryption.
I successfully upgraded the firmware to the latest version 2 build but not change. In the limited logs of the router I don't see anything strange.
There is no problem with router's functionality, it's just that it keeps resetting and then I have to reconfigure all the previous settings. Importing them is not a long term solution.
From time to time the Power LED light is orange (this could result in reboots). I have no idea why this problem occurs.
The user guide says nothing about the orange light ot the power LED. Could be some hardware problem but it is something not persistent.
Any hints are appreciated.

Make sure the power adapter is properly connected to the router and to the power outlet. Make sure also it is the correct power adapter for the router. The output of the power adapter should be 3.3 V DC, 2.0 A. If the power adapter is correct, then it could be a possible hardware issue. Make sure the firmware has the version 1.06.1. If it is the latest firmware installed, do a firmware re-flash. It means, you still need to do an upgrade using the same firmware version. After that, do a reset and powercycle the router. After the upgrade process, reconfigure the router.

Airport Extreme (n) router keeps resetting.

My internet keeps going on and off, Ive reset to factory defaults and it keeps resetting every 10-15 minutes for a few seconds. The only thing I have changed is added 1 port forward.

I have the exact same problem and it has only been since just after the new years actually about the time the new time capsule was released it started happening I don't really want to hard wire my connection that is why I have wireless router so my Mac doesn't have to be like pc with wires coming out of it like an octopus as a caveat my time machine stopped working without warning too a few days ago??????????????HMMMMMMMMMMMMMMMMM anyone else?

My Ipod just keeps resetting itself.HELP!!!!

My 60 GB ipod video just keeps resetting itself. I have tried to reset it and plug it into my computer, what should I do??
Windows Windows XP

Try the standard fixes:
- Reset. Nothing is lost
Force an app to close: Hold down the On/Off button for a few seconds until a red slider appears,
then hold down the Home button until the app quits.
- Restore from backup
- Restore to factory settings/new iPod
If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

IPad - after software upgrade the APN settings keep resetting by themselves. There are multilple accounts of this happening. Please help.

Hello,
I have a problem with an iPad 2. After the software upgrade to iOS 5 the APN settings keep resetting all by themselves (I set the APN, I get out of the setting by pressing the back arrow on the top left of the screen, I get back in there and the APN setting is gone). Of course, the internet connection si not working. I've seen other people having the same problem on their iPads after the upgrade.
Does anyone have any idea what the problem could be?

I too am experiencing this issue - on an iPad 2 using a UK BT DATA plan SIM. This is not an issue with the SIM, as I have tried it in a different iPad and it works without any problems.
I have also tried all recent iOS updates, hoping it would overcome the issue - but no joy.
Can we have some assistance from the fine people at Apple please???
It is getting rather infuriating

Keyboard and Mouse Settings Keep "resetting"

Ok so I set up my keyboard's F5 to be the Desktop View ( F11 the old way ) and squeezing my mighty mouse, I set to Expose... but every time I do that, it resets itself after like a day or so..
Anyone experience this? I have to go back in and check off the F5 option again, and I have to change my mouse from Button 4, to Expose.
HELP!

I am having the same problem. I have my system preferences setup to synch with my .mac account. The mouse settings keep resetting on both computers I have synched.
The problem seems to have ramped up since the update to 10.5.3. It is now happening every synch.

Smart folders keep resetting

Hi everybody
I have made a number of smart folders but they keep resetting the rules that I have made for the folders.
I have a suspicion that it happens every time I sync. with my .mac account. But I am not sure.
Doe’s anyone have a good suggestion that can solve my problem.
Best
Lars Kudsk

Hi Kudsk .
Yes, this looks like a .Mac syncing issue.
First of all, in Address Book do File > Back up Address Book, just in case something goes wrong while trying to solve the problem. It wouldn’t be the first time someone loses his/her entire Address Book because of syncing issues.
Now, set up things the way you want, then go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.

System Prefs keep resetting

I have this thing where some System Preferences keep resetting to defaults between restarts: particularly affected are Displays (switching the displays menu item off) and MenuMeters (switching all its menu bar displays off). This would happen on my old G4 Cube and my old PowerBook G4. Over the last month or so I have replaced both with a MacBook Pro and an alu-iMac, hoping the problem would go away, but it hasn't. Both new machines were set up with the migration assistant, so I suppose whatever the bad was on the old ones is still there. Where should I start looking?

Considering that it reoccured, I would consider doing an archive and install. Since the problem was there and migration assistant was used, it'll probable continue. Delete the same preference file again before the reinstall, then immediately boot from the install disk. To bring yourself up to date quickest, use the 10.4.10 combo update.

Variable Width profile for the brush tool keeps resetting

This problem is baffling me. I'm fairly new to Illustrator so I would appreciate some help. I’m using Adobe Illustrator CS6 with a mouse rather than a pressure graphics tablet.
When I create a stroke using the Paint brush tool I would like the stroke to contain a variable width profile. For example narrower at the beginning and end of the stroke but thicker in the middle. Now I can do this by selecting the line after I have made the stroke and choosing the Basic Brush Definition from the drop down list. But if i try to draw a new line the settings are reset again. I cannot create a variable stroke while creating the stroke. The brush definition keeps resetting to 5 pt Round and stroke width 1 pt. It would be much quicker if the stroke remained as a varying width profile as I created the strokes.
I noticed the same problem with the blob brush tool except it's even worse. With the blob brush tool the stroke weight always resets regardless of whether or not I try to set a Variable width profile.
I tried deselecting "New Art has Basic Appearance" mentioned on another forum but that didn't work.
I know its possible because I’ve seen it done on this youtube video. http://www.youtube.com/watch?v=R5wW_65iAiU
Notice the variable width profile is maintained as the artists draws. It doesn’t keep resetting.
Thanks

Just set the Colorization method of the new Brush to Tints or Tints and Shades from the dropdown in the lower right corner of the New Brush diaglo.

Playlist folders keep opening

I just installed iTunes version 11.1.2 on my Mac. Since I have done that, my playlist folders keep opening up when I do a search for a song. I have 225 playlists, and have them broken down into 5 folders -- playlists 1-50, 51-100,etc. Normally, I only keep the final one (201-250) open. Now, when I do a search in the library for a song, the playlist folders all open up, showing all 225 playists. This never happened until I did the update. Anyone know a setting change to make to stop this from happening? Thanks

I have the same problem since upgrading to 11.1.anything version of iTunes. All the playlist folders keep popping open, for no reason that I can discern.
On my Mac (iTunes 11.1.3), a Command-click on any folder's little triangle closes all the folders on that level all at once. It's not a fix, but at least you don't have to close 230 folders one at a time.
On my Windows 7 machine (iTunes 11.0.2*), control-click seems to do this same thing.
*It's too late for my Mac, but for my Windows 7 machine I'm extremely reluctant to 'upgrade' to the very buggy 11.1 version till Apple removes the bugs they inserted. I have seen no benefit from 11.1 on the Mac, just many new bugs.
Hey Apple! This folders-popping-open thing is VERY ANNOYING. Please fix!

Session keep resetting

Hello everyone,
I have a problem with the HTTPsession variable that keeps resetting (the id changes)
I have a java application written in jsf 1.2 using beans, on jdeveloper that stores variables on the session and works correctly.
Now, I tried to integrate this application with UCM Content server to make the pages dynamic, i built a new section and a new region template and placeholder for each page in the application and i used the same page template for all pages, each region template has a <c:import tag> to the corresponding jsf page.
The problem is, that each page refresh now goes through the page template, the region template and finally the jsf page (and not just the jsf page like before) and this causes session reset, which makes it impossible to store attributes in the session.
I tried setting the beans (on faces-config.xml) to request scope and to session scope, but the issue remains.
I tried changing the session persistence store in weblogic.xml file from MEMORY to FILE and to COOKIE and still ..
I also tried to add the parameter "-Dweblogic.servlet.useExtendedSessionFormat=true" to server run but with no help.
Any thoughts or suggestions ?
Thanks,
Moran

weblogic.xml :
<?xml version = '1.0' encoding = 'windows-1255'?>
<weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-web-app http://www.bea.com/ns/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd"
xmlns="http://www.bea.com/ns/weblogic/weblogic-web-app">
<library-ref>
<library-name>oracle.ucm.wcm.domain.webapp</library-name>
</library-ref>
<jsp-descriptor>
<resource-provider-class>oracle.adf.library.webapp.ADFJspResourceProvider</resource-provider-class>
</jsp-descriptor>
<library-ref>
<library-name>jstl</library-name>
<specification-version>1.2</specification-version>
</library-ref>
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
</library-ref>
</weblogic-web-app>
faces-config.xml :
<?xml version="1.0" encoding="windows-1255"?>
<faces-config version="1.2" xmlns="http://java.sun.com/xml/ns/javaee">
<managed-bean>
<managed-bean-name>login</managed-bean-name>
<managed-bean-class>payments.beans.LoginBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>paymenthistory</managed-bean-name>
<managed-bean-class>payments.beans.PaymentHistoryBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>payment</managed-bean-name>
<managed-bean-class>payments.beans.PaymentBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>reference</managed-bean-name>
<managed-bean-class>payments.beans.ReferenceBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>payments.beans.UserBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>sendmail</managed-bean-name>
<managed-bean-class>payments.beans.SendMailBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>search</managed-bean-name>
<managed-bean-class>payments.beans.SearchBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>log</managed-bean-name>
<managed-bean-class>payments.beans.LogBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>file</managed-bean-name>
<managed-bean-class>payments.beans.FileBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>constants</managed-bean-name>
<managed-bean-class>payments.beans.ConstantsBean</managed-bean-class>
<managed-bean-scope> session </managed-bean-scope>
</managed-bean>

<validator>
<validator-id>validateName</validator-id>
<validator-class>validations.ValidateName</validator-class>
</validator>
<validator>
<validator-id>validateID</validator-id>
<validator-class>validations.ValidateID</validator-class>
</validator>
<validator>
<validator-id>validateAddress</validator-id>
<validator-class>validations.ValidateAddress</validator-class>
</validator>
<validator>
<validator-id>validatePhone</validator-id>
<validator-class>validations.ValidatePhone</validator-class>
</validator>
<validator>
<validator-id>validateEmail</validator-id>
<validator-class>validations.ValidateEmail</validator-class>
</validator>
<validator>
<validator-id>validateGeneral</validator-id>
<validator-class>validations.ValidateGeneral</validator-class>
</validator>
<validator>
<validator-id>validateHouseNum</validator-id>
<validator-class>validations.ValidateHouseNum</validator-class>
</validator>
<validator>
<validator-id>validateZipCode</validator-id>
<validator-class>validations.ValidateZipCode</validator-class>
</validator>
<validator>
<validator-id>validatePassword</validator-id>
<validator-class>validations.ValidatePassword</validator-class>
</validator>
<validator>
<validator-id>validateUserName</validator-id>
<validator-class>validations.ValidateUserName</validator-class>
</validator>
<validator>
<validator-id>validateReference</validator-id>
<validator-class>validations.ValdiateReference</validator-class>
</validator>
<validator>
<validator-id>validateReceipt</validator-id>
<validator-class>validations.ValidateReceipt</validator-class>
</validator>
<validator>
<validator-id>validateAmount</validator-id>
<validator-class>validations.ValidateAmount</validator-class>
</validator>
<validator>
<validator-id>validateDate</validator-id>
<validator-class>validations.ValidateDate</validator-class>
</validator>

<application>
<message-bundle>validations.messages</message-bundle>
</application>
</faces-config>
web.xml :
<?xml version = '1.0' encoding = 'windows-1255'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<context-param>
<param-name>oracle.adf.jsp.provider.5</param-name>
<param-value>oracle.stellent.wcm.javaee.shared.jsp.IdcJspProvider</param-value>
</context-param>
<context-param>
<param-name>org.richfaces.SKIN</param-name>
<param-value>blueSky</param-value>
</context-param>
<filter>
<display-name>RichFaces Filter</display-name>
<filter-name>richfaces</filter-name>
<filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
<filter-name>richfaces</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter>
<filter-name>JpsFilter</filter-name>
<filter-class>oracle.security.jps.ee.http.JpsFilter</filter-class>
<init-param>
<param-name>enable.anonymous</param-name>
<param-value>true</param-value>
</init-param>
</filter>
<filter>
<description>OpenWCM Mode Filter</description>
<filter-name>wcmmodefilter</filter-name>
<filter-class>oracle.stellent.wcm.javaee.servlet.filter.ModeFilter</filter-class>
</filter>
<filter>
<description>OpenWCM Site Filter</description>
<filter-name>wcmsitefilter</filter-name>
<filter-class>oracle.stellent.wcm.javaee.servlet.filter.WCMSiteFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>JpsFilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>wcmmodefilter</filter-name>
<url-pattern>/wcm-contrib/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>wcmmodefilter</filter-name>
<url-pattern>/wcm-design/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>wcmsitefilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<description>For proxying Content Server content and services</description>
<display-name>OpenWCM Proxy Servlet</display-name>
<servlet-name>wcmproxy</servlet-name>
<servlet-class>oracle.stellent.wcm.javaee.servlet.proxy.ProxyServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<description>Initializes the OpenWCM framework</description>
<display-name>OpenWCM Initialization Servlet</display-name>
<servlet-name>wcmInitServlet</servlet-name>
<servlet-class>oracle.stellent.wcm.javaee.servlet.filter.WCMInitializeServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name> Credit2000ResponseIframe</servlet-name>
<servlet-class> servlets.Credit2000ResponseIframe</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name> AddExternalPaymentServlet</servlet-name>
<servlet-class> servlets.AddExternalPaymentServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>Credit2000ResponseServlet</servlet-name>
<servlet-class>servlets.Credit2000ResponseServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>AuthenticationServlet</servlet-name>
<servlet-class>servlets.AuthenticationServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>StickyCaptcha</servlet-name>
<servlet-class>nl.captcha.servlet.StickyCaptchaServlet</servlet-class>

<init-param>
<param-name>width</param-name>
<param-value>250</param-value>
</init-param>
<init-param>
<param-name>height</param-name>
<param-value>75</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>AudioCaptcha</servlet-name>
<servlet-class>nl.captcha.servlet.AudioCaptchaServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>wcmproxy</servlet-name>
<url-pattern>/wcm/idc/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>StickyCaptcha</servlet-name>
<url-pattern>/stickyImg</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AudioCaptcha</servlet-name>
<url-pattern>/audio.wav</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>Credit2000ResponseIframe</servlet-name>
<url-pattern>/Credit2000ResponseIframe</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>Credit2000ResponseServlet</servlet-name>
<url-pattern>/Credit2000ResponseServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AddExternalPaymentServlet</servlet-name>
<url-pattern>/AddExternalPaymentServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AuthenticationServlet</servlet-name>
<url-pattern>/AuthenticationServlet</url-pattern>
</servlet-mapping>
<error-page>
<error-code>403</error-code>
<location>/wcm/support/login/wcm-login.jsp?tryagain=true</location>
</error-page>
<error-page>
<exception-type>oracle.stellent.wcm.client.ApplicationException</exception-type>
<location>/wcm/support/wcm-page-error.jsp</location>
</error-page>
<security-constraint>
<web-resource-collection>
<web-resource-name>ContributionMode</web-resource-name>
<url-pattern>/wcm-contrib/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>WCMContributor</role-name>
</auth-constraint>
</security-constraint>
<security-constraint>
<web-resource-collection>
<web-resource-name>DesignerMode</web-resource-name>
<url-pattern>/wcm-design/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>WCMContributor</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>OpenWCM</realm-name>
<form-login-config>
<form-login-page>/wcm/support/login/wcm-login.jsp</form-login-page>
<form-error-page>/wcm/support/login/wcm-login.jsp?tryagain=true</form-error-page>
</form-login-config>
</login-config>
<security-role>
<role-name>WCMContributor</role-name>
</security-role>
<context-param>
<param-name>com.sun.faces.enableRestoreView11Compatibility</param-name>
<param-value>true</param-value>
</context-param>
</web-app>
------------------------------------------------

HT203066 Health App keeps resetting data and dashboard view

Health up on my iPhone 5s (iOS v8.1.2) keeps resetting the data and dashboard views:
- when I enter data in the 'Me' tab (Birthdate, Sex, Blood type), the data keeps disappearing when opening the application again
- adding a dashboard (i.e. 'Weight') the dashboard shows (with no values) and disappears again
- adding a data point in any dashboard manually does not show.
Also - I am using MyFitness Pal & Withings Health App - no data is showing.
I recently re-installed the phone as new (couple of weeks ago), I re-installed the third party apps (and deleted all data when asked)
Any hints, pointers?
Thanks in advance

I'm having the exact same problem. I've even tried:
1. Turn off all syncing by theirs-party sources.
2. Delete all third-party apps that might sync data so that the Health App "Sources" list is empty
3. Reset all settings on the phone.
4. Reload third-party apps one by one
5. Selectively turn on syncing by third-party apps and only sync categories I really want to see.
All to no avail. The Health App crashes constantly and when trying to input data into third-party apps, those apps will crash also.
I'm currently trying to sync data with:
UP by Jawbone (UP24)
Withings HealthMate (Withings WiFi scale)
MyFitnessPal
Runtastic
Nike+

Playlist Problems - Keeps Resetting

Similar Messages

Maybe you are looking for