Playlist Song Position in Memory ipod 7th generation

I recently purchased a 7th generation ipod upgrading from a 4th generation which I had for several years.  With my 4th generation ipod I would frequently listen to a playlist at work in shuffle mode that would have over a 1,000 songs.  This could take about 14 days to completely listen to the entire playlist.  If I didn't use the ipod for 3 or 4 days and then want to continue the playlist exactly where I left off, there was no problem.
I've noticed that with my 7th generation ipod, this isn't the case.  If I pause a playlist then start it again several days later, the last song that I listened to is ready to play but the playlist starts all over again and treats that song as song 1.  However, if I don't wait several days and want to listen to the playlist the next day, the playlist picks up right where it left off.
My question is this:  how long does the 7th generation ipod hold a playlist song position in memory?  Is there a work around to hold it in memory indefinitely?
Thanks,
Mark

Hello jamie,
Thank you for contacting Apple Support Communities.
You can use the following articles to troubleshoot the battery life on your iPhone.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Accurately determine your iPod battery life
http://support.apple.com/kb/HT1322
Regards,
Jeff D.

Similar Messages

  • Ipod 7th generation skipping song

    Hello everybody,
    I'm new on this forum. This is my problem:
    I have an iPod 7th generation. I have 300 mp3 on my iPod. Some of those are skipping when I listen but, if I connect iPod to my pc, open iTunes and go on "iPod of user" then select "music" and play those .mp3, then they play correctly.
    What can I do? Download another time?

    Hey there superbeda,
    If these songs play just fine on your iTunes library but continue to skip when played on your iPod Nano 7th gen, I would next reset your device with these steps:
    iPod nano (7th generation): Hardware troubleshooting
    Reset iPod nano. First, make sure iPod nano is charged. Then press the Sleep/Wake button and the Home button for six seconds, until the Apple logo appears.
    Then test the issue again. If it persists, I would restore the iPod with iTunes on your computer:
    Restoring iPod to factory settings
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • My ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website

    my ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website

    This article should give you the options
    https://discussions.apple.com/docs/DOC-3991

  • 7th generation.  I bought a new iPod 7th generation.  I can't just touch music, I have to double tap it. I can't select songs with a tap, I have to double tap it.  I then have to double tap play/pause, or next song selection to move to next song.  I

    I bought a new iPod 7th generation.  I can't just touch music, I have to double tap it. I can't select songs with a tap, I have to double tap it.  I then have to double tap play/pause, or next song selection to move to next song.  I also can't use my finger to scroll volume.

    Hello HoopsMD,
    Welcome to the Apple Support Communities!
    I understand that the display on your iPod nano (7th generation) is not responding to your touch as you would expect. In this situation, I would recommend reading over the attached article and working through the steps within to help resolve this issue. 
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Display
    Follow these steps if your iPod doesn't respond to your input or has a display-related issue.
    Screen is unresponsive and displays Apple logo or white screen
    Reset iPod by holding down the Sleep/Wake button and Home button until you see the Apple logo appear. If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes.
    If the Apple logo does not appear, or if the iPod is not seen in iTunes, connect it to iTunes and try to restore.
    Touch screen does not accept input
    Clean the screen with a microfiber polishing cloth.
    Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
    If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
    The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
    Sync with iTunes and restore the iPod.
    Have a great day,
    Joe

  • My iPod 7th Generation isn't playing any of my songs.

    I bought an iPod 7th generation classic. It played all my songs there wasn't any issue. Two days into using it, it stopped playing any music. If you hit play it said it was playing but the countdown stayed at 0.
    I returned it and bought a new one.
    However, the same thing has happened here.
    It is also stuck on lock.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I can download new music from itunes but how do I sync to my ipod (7th generation)???

    I can download new music from itunes but how do I sync to my ipod, 7th generation   help and frustrated???????

    iTunes: Syncing media content to iOS devices and iPod - http://support.apple.com/kb/HT1351 - detailed example: https://discussions.apple.com/message/18860187
    iOS: Syncing with iTunes - http://support.apple.com/kb/ht1386 -  You can sync everything or selected playlists.  "WIth iTunes 10, when automatically syncing, you can also manually drag items to the iDevice. These will show up in Manually Added Songs at the bottom of the Music tab after Playlists, Artists Genre, Albums." - https://discussions.apple.com/message/18919754
    iTunes 10 for Mac: Sync your device over a Wi-Fi network - http://support.apple.com/kb/PH2555

  • How do I restore the ipod 7th generation to a previous backup

    Can the ipod 7th generation be restored to a previous backup? I just replaced my ipod because of a defective battery and I want to restore the playlists exactly as they were on the old one.

    You have to sync them again from your computer. There is no backup.

  • Just got a ipod 7th generation and having some difficulty copying tunes from 5 generation to new ipod; cant seem to sync old with new. any suggestions?

    just got a ipod 7th generation and having some difficulty copying tunes from 5 generation to new ipod; cant seem to sync old with new. any suggestions?

    Plug your iPod in and when it appears in iTunes, click on it from under Devices in the left hand pane.  This brings you to the Summary tab.  Locate and click on the Music tab.  What configurations do you have made from under this tab?  Is your iPod configured to sync those playlists?
    B-rock

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • Ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

    ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.  help?

    Hi stitchinstar!
    I have an article for you that will help  you troubleshoot this issue with your iPod and iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Updated my Windows 8 and updated Itunes to newest versions and now my Ipod 7th Generation Nano is not recognized on my computer or Itunes anymore. I have went thru all steps instructed and offered here so what else can I do?

    Recently have updated my Windows 8 and updated Itunes to mose recent version available. My Ipod 7th Generation Nano worked, connected and synced without difficulty prior to this updating, Now when I plug into my computer it will pop up Itunes but say that this Ipod is not recognized. I have done multiple steps offered to try and nothing has worked. Any other suggestions would be helpful. I just got this Ipod for Christmas and now can't even use it to sync content anymore.

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • IPod 7th generation and Nike

    Hi there!
    I currently have an iPod 6th generation that I was using with a Polar Nike + compatible Hr Monitor, until I was no longer able to get Cals burned info when I was doing any other activity outside of Running.  I am wondering if the iPod 7th Generation will support other activities outside of running like the 6th generation used to?  or have they removed this feature all together?  Also I now use the new Polar H7 bluetooth strap, will it be compatible??  Thanks and any help on these burning questions would be much appreciated!!

    Hey SeanW89,
    Thanks for the question. The iPod nano 7th generation has bluetooth functionality that can connect to the Nike+ sensor. You do not need to purchase the USB kit, but rather just the sensor itself:
    Nike + iPod Sensor - Apple Store (U.S.)
    http://store.apple.com/us/product/MA368LL/E/nike-ipod-sensor
    iPod nano (7th generation): Frequently used features
    http://support.apple.com/kb/HT5470
    Connect to Bluetooth accessories
    You can connect your iPod nano to compatible Bluetooth headsets and other accessories, including some hands-free systems in newer cars. You can also connect to a Nike+ sensor or a Bluetooth heart-rate monitor. iPod nano supports A2DP for audio streaming and AVRCP for controlling playback on Bluetooth devices.
    Note: FM radio will not play through a Bluetooth accessory.
    Thanks,
    Matt M.

  • IPod 7th generation shows no music in menu, but does on iTunes

    I operate on a Windows platform with iTunes SW ver 11.2.2.3 and an iPod 7th generation with SW version 1.0.3. Both identified as latest.
    All was good until the battery drained out completely. I have since been able to synch music and audiobooks that show up on iTunes as being loaded on the iPod.
    But when I use the iPod menu, the "Music" icon no longer takes me to the menu list (music, audiobiiks, etc) but to a screen with musical notes on it and says there's nothing.
    Tried to synch it on an Apple computer and it worked. Reset it to the Windows computer and it doesn't.
    Anyone can help please?

    I have had this same problem for over a month with a Win7 system. I have been working with AppleCare Support all along and we have even replaced the Nano twice without resolution. We tried different cables, different USB ports, uninstalled iTunes, ran CCleaner to correct registry errors, restarted, reinstalled iTunes, etc, etc several times. I posted my problem along with a lengthy explanation earlier tonight. I have documented everything that I have done with Apple and we are both stumped.
         Lets hope someone can figure out what causes the directory on the Nano not to recognize that tracks have been loaded.

  • Can i use my ipod 7th generation with a bose dock

    can i use my ipod 7th generation with a bose doc
    k?

    All of the Bose Dock I see listed online have the 30 pin connector. The iPod 7th Gen has a Lightning connector.
    So you would need a 30 pin to Lightning adaprt that would make for a rather percarious mounting of the iPod.
    I would recommend against it unless you can find one with the Lightning connector.
    Allan

  • My ipod 7th generation switches itself on

    My ipod 7th generation switches itself on, long after i've switched it off properly and is draining the battery.  Anyone else had this problem or is a fault?

    The same thing is happening to mine!  Very frustrating!  It'll just stop for no reason and I've continued on my run without knowing it's stopped.  Could there be a 'one touch' button that i don't know I'm pressing when I check my ipod on my arm or is it just the electronic?!  This need to stop otherwise I can't trust it anymore...

Maybe you are looking for

  • Why is the iphone 5 no longer available

    i don't see the iphone 5 for sale on the apple store.  why is it no longer available?

  • How to use two "field separator" in the same Comunication Channel

    Hi experts, I  upload flat files with XI, and my Comunication Channel is configured to use the field separator "~". FILA.fieldSeparator     ~ Is posible to configure that Comunication Channel to accept two field separator. I want that upload flat fil

  • OIM 10G : UIX Not found error

    Hello, I've moved OIM 10G 9102 to application server Weblogic in cluster (version 10.3.5.0 - 11g). All the workflows and provisioning pieces are working as expected. However, when a manager user is trying to set his proxy by selecting calender dates.

  • Load picture control with png image from the web

    Hi guys, Is there an example anywhere for Labview 8.6 for loading a picture control with png image from the web?

  • Netpanzer

    i'm having trouble compiling with the package provided # Contributor: Angelo Theodorou <[email protected]> # Contributor: Darwin Bautista <[email protected]> pkgname=netpanzer pkgver=0.8.2 pkgrel=1 pkgdesc="An Online Multiplayer Tactical