Playlist viewing issues
I use my iPod Touch to create playlists for my dance classes. I often change the playlists right on my iPod Touch. When I try to view my playlists on my device through iTunes, the playlist's content does not coincide with the playlist content that is actually on my device. I can look at them at the same time and they don't match. I am aware that I can't sync the playlists from my device to my computer using iTunes, but that I can use Senuti to do this. My problem is that my playlists don't match. How can I fix this without losiing my current device playllists?
marshsparkle wrote:
Whats a girl to do?
1st thing I recommend is run Software Update from the Apple menu.
Restart the computer then run it again.
My problem is that all the songs in my playlists which are created in itunes do not show up in the playlists
If they are in your playlists, how are they not in your playlists?
Similar Messages
-
Recently Played playlist syncing issues
Hi Apple friends,
I've noticed some odd behaviour with my iPhone 4 since either iOS 5 or my purchase of iTunes Match (I can not recall which is accurate).
I've read a lot about playlist issues with iOS 5 but I have not heard a mention of anything similar to my situation. I usually sync the default playlists of Recently Played and Recently Added with my iPhone 4 running the latest iOS 5.0.1. I am familiar with the Recently Added bug of reversing the order of the playlist and I thin I can live pretty comfortably with that.
Recently Played however will not sync at all. iTunes says it is syncing and in fact it even names newly played files that are syncing over, but they never appear on the phone. In fact, the recently played playlist that is synced successfully at first will slowly get smaller and smaller as if it was actually keeping a count of recently played songs on my phone (which is obviously played less often) when it is supposed to be a count of recently played songs on my iMac.
Even opening up the playlist viewer of what is on my iPhone in iTunes shows the playlist as the proper size of ~200 tracks but then in reality, Music.app shows ~90 tracks at the moment. iTunes never reports an error during sync and a restore to defaults worked with the first sync but it has since gone back to this behaviour.
I had a bunch of 3G problems (Rogers, eh?) with iTunes Match, so I have long had it disabled for months now on my phone. I don't think this can be the issue, although iTunes Match did have a lot of playlist problems when I had it enabled, but many forum posts have shown me that a lot of people had those issues anyways.
I have also tried switching between USB and Wi-fi Sync with no success... Has anyone else seen a similar issue?
My Recently Played playlist uses this filter:
1. "Last Played" is in the last "2 weeks"
2. "Media Kind" is "Music"
3. Match only ticked items
4. Playlist is live updating (Could this be it?)
Message was edited by: brianjca
Wording and formatting editsbrotherludi wrote:
My Recently played playlist is not correct. My setting is:
Match all of the following rules:
Last played is in last 3 days
Playlist is Music
Media kind is not Podcast
but it does not work, the playlist is not correct.
Delete the rule saying "Playlist is Music" and see what you get.
Also, make sure you have it set for Live Updating. -
Edit the hyperlink in the alert email (Modify my alert settings, View Issue Tracking)
is it possible to add the external hyperlink in these emails instead of the internal hyperlink?
in example when I get a list tracking email there are hyperlink that get sent out with these tags Modify my alert settings | View Issue Tracking | mobile view that use the internal url //servername how can I change it to use the external
address //internetnameHi Joe, check out the following links for solutions:
http://sharepoint.stackexchange.com/questions/13216/how-to-create-custom-email-alert-template-in-sharepoint-2010
https://social.technet.microsoft.com/forums/sharepoint/en-US/e5ebc5a7-8295-49e4-a817-c31066e1ac3d/customize-the-sharepoint-2010-email-alert
http://www.alectang.com/blog/archive/2012/05/16/how-to-customise-sharepoint-alert-email-template.aspx
cameron rautmann -
ITunes 11.01 playlist view - strange behaviour
iTunes 11.01 playlist view.
I've selected a folder and want to create a new playlist. But New / Playlist is greyed out.
This often happens.
At other times it lets me create, but bounces straight into album view - pretty pictures, but not what I want since I am trying to sort and catalogue a folder containing 66 CDs [more than 200 Bach cantatas] which I have loaded.
Now I want to create a separate playlist for each cantata.
Similar process worked fine in iTunes 10 [splitting Vivaldi albums].
Is this part of the iTunes 11 "new look" - am I missing something?
Thanks muchMany thanks
It's not that I don't like the new look, in particularly the new mini-player is excellent.
simply that the sidebar / playlists is more convenient for the long and tedious work of cataloguing big multi-disc sets and splitting them into one playlist for each separate work.
When I've finished the Bach cantatas, I should start on Haydn's 104 symphonies, currently packed into 33 CDs.
But it's worth the effort. As I move more and more discs into the digital workflow - or should that be EARflow? - I don't often play the physical CDs any more. AirPort Express feeds them straight in to the hifi -
When searching for a song title, an artist etc in Itunes 12 it shows the results via a tiny consolidated drop down menu, however in previous version of Itunes search results would be displayed in the main playlist view. I seriously dislike the search drop down view because A) it only shows limited results B) It shows artwork C) It is confusing when trying to search your playlist when you are trying to organize your library.
If anyone knows a way to change the search view preference please let me know how or advise me on how to suggest to Apple that they change it back or give people the option to choose which search result view they would like to use.
Thanks.If you disable the Search Entire Library option (available in the dropdown to the left of the search box) iTunes 12 will not show the search results in a dropdown but will immediately go to a filtered version of your current view. With the Search Entire Library option enabled, you can still get to this filtered view by clicking on the first entry in the drop down, which will say "Show <search string> in Library" or "Show <search string> in <playlist>" depending on where you start the search from.
There are some inconsistencies in the search behavior, most notably that where you have the Search Entire Library option enabled and search within a playlist the dropdown will show all matches in you complete library (whether in your playlist or not), whereas the first entry in the dropdown just takes you to the filtered playlist view.
You can use https://www.apple.com/feedback/itunesapp.html to provide input to developers about bugs, enhancement requests, etc. -
Viewing issues with Adobe Acrobat Professional 8
We have Adobe Acrobat Professional 8 installed, and we are having some issues when viewing pdf documents. Once a Word document is converted to a pdf document, some of the hyperlinks are appearing thicker (almost bold) than others, and some of the text appears lighter/darker than the rest of the text. There is no pattern to this, it is all very random.
When we print the pdf document, everything looks correct, so this only happening when we view the document on the computer.
Can anyone provide a suggestion on how to fix this issue?
Thanks!Sorry, I forgot the attachment!
Hi Bill,
I am attaching screen shots of 1) a page where the hyperlinks appear thicker and 2) the document properties pages showing the fonts.
We have tried creating it with both the Adobe PDF Maker and the MS PDF tool and it happens using both. I am thinking that this really is a viewing issue, because it prints out fine. Also, it looks the same no matter what the zoom setting is.
Please let me know if you have any other advice.
Thank you!
Cari -
Delete (as in Trash) a track from a playlist view?
Because I so despise Apple's new segregated libraries (I'd be okay if I could just shift a few tracks from one auto(cratic) category to another without major effort), I am toying with creating smart playlists of my various genres to ease my browsing. The problem is, there isn't any way (that I know of) to delete a track from a playlist. And I mean delete as in "remove from the library, ask me if I want to move it to the trash" delete, not "remove from the playlist" delete.
Does anyone know of a way to do this (easily)?
It almost seems like a philosophical issue -- I mean, why isn't there a "trash" option in the contextual menu for a track wherever I'm viewing it? There's a clear logic for deleting a track from a regular playlist meaning that it is only removed from that playlist, but left in the library. But in a smart playlist, when I hit delete, I can't remove it from the playlist -- delete has no functionality. I noticed this when playing with iFlicks, which does let you trash a video while viewing it in a smart playlist -- which intuitively made sense to me.
I honestly only go into the library view when I need to throw things out anyway, so having it segregated (and unpredictably, since it's based on filetype rather than genre -- i.e. underlying and indeterminant format, rather than conceptual and -- hopefully -- determinant metadata) makes it hard to predict where a track may end up.
Thoughts?
Windtunnel G4/500MHz & AlBook G4/1.25GHz Mac OS X (10.4.8)Bob, that does indeed solve the question. The panting rage has subsided, to be replaced by mere indignation.
Thanks! -
I just upgraded to Windows 7 and got Itunes up and running and everything seems fine. Playlists are restored, all music accounted for, etc.
My only issue at this point is when I go into Coverflow view, the area in Itunes where the album artwork is displayed is just a big black square.
I've tried some settings and searched for fixes, but so far have been unable to resolve the problem.
Any suggestions anyone can offer would be greatly appreciated.I figured out what the issue was with this. It turns out that I couldn't turn on accelleration on my video card because it was outdatad. To check this run dxdiag and look at the display tab. You will see the directdraw accelleration. If this is off, turn it on. If it say's 'not available' see if you can upgrade your driver.
But...if you are like me, the video card was just outdated. I bought a new video card for around $35, installed it and presto...coverflow is working perfectly. -
version 12.1.2
I have a list view with 2 rows, 2 columns. column sizes are ( c1 = 85% and c2 = 15 %). C1 displays table data, and c2 has a button on each row, which takes me to different page.
When I click the button I am expecting it to take me to the next page. But for some reason I have to click the button twice to go to the next page. When I click the first time, it only highlights the
row, then when I click the second time, it takes m to the next page. Is there any special settings I need to change for a list view?
First I tried implementing row double click by using client/server listeners to take me to the next page, it showed the same behavior (had to double click twice to go to next page). So I thought it might have something to
do with the client/server listeners not working correctly. So switched to using button to go to next page and I am still seeing the same behavior. Here is my code, I would greatly appreciate any help.
<af:listView value="#{bindings.emp1.collectionModel}" var="item"
emptyText="#{bindings.emp1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.emp1.rangeSize}" id="lv1"
partialTriggers="::b6" selection="single" immediate="true"
binding="#{SomeBean.empListView}">
<af:listItem id="li1">
<af:panelGridLayout id="pgl3">
<af:gridRow marginTop="5px" height="auto" id="gr1">
<af:gridCell marginStart="5px" width="85%" id="gc1">
<af:outputFormatted value="#{item.bindings.empId.inputValue}"
id="of1"
inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
binding="#{MouseDoubleClickBean.empID}"/>
</af:gridCell>
<af:gridCell marginStart="5px" width="15%" marginEnd="5px"
id="gc2">
<af:button id="b4" icon="#{resource['images:add_ovr.png']}"
action="callEditFlow" rendered="true"
visible="true"/>
</af:gridCell>
</af:gridRow>
<af:gridRow marginTop="5px" height="auto" marginBottom="5px" id="gr2">
<af:gridCell marginStart="5px" width="85%" id="gc3">
<af:outputFormatted value="#{item.bindings.empName.inputValue}"
id="of2"
inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
binding="#{MouseDoubleClickBean.empName}"/>
</af:gridCell>
<af:gridCell marginStart="5px" width="15%" marginEnd="5px" id="gc4"/>
</af:gridRow>
<af:clientListener method="doMouseDblClick" type="dblClick"/>
<af:serverListener type="CopyEmp"
method="#{MouseDoubleClickBean.copyEmpDetails}"/>
</af:panelGridLayout>
</af:listItem>
</af:listView>
<af:resource type="javascript">
function doMouseDblClick(evt) {
var btn = evt.getSource();
AdfCustomEvent.queue(btn, "CopyEmp",{},true);
evt.cancel();
</af:resource>
Thanks.Hi,
can you try af:commandButton to see if it is a problem with af;button. If this doesn't work then it appears that there is an issue with the focus setting preventing the action to come through. A work around in this case would be to override the SelectionListener on the vlieView component and to queue the command button action (the downside is that each time you select a row it will navigate (which means you could set the button display to hidden).
I suggest to file a bug with support. If you don't have a support contract, please zip up a simple test case based on the HR schema and send it to frank <dot> nimphius < at > oracle <dot> com (replace the <dot> with . and <at> with @). The testcase should be zipped and renamed to ".unzip" as the extension
Frank -
OBIEE 11g Map View - Issue with Label Translation
Hi All,
I have a strange translation issue with the Maps in 11g.
Created in English language to plot the Revenue for each of the Postal Codes.
I selected Postal Code and Revenue Amount in the Criteria and created a new Map View. It had the text 'Postal Code' in the Map Legend and then the scale for revenue amount.
Now I logged on with Chinese Language , it still appears as 'Postal Code' in English where in it was actually supposed to show it in Chinese.
We have a translation pack to get all the column names translated. If I try creating a new table view, it shows the translated text instead of 'Postal Code', but some how this doesn't work with Maps.
Has anyone faced similar issues ? Is there a workaround for this ?
Thanks for any pointers.Hi,
I also encounter the same issue. When I view combined layout, I get the No Results message. But when I edit the table layout, I see that there are records returned. Does anyone had any luck in resolving this issue?
Thanks! -
Playlist Sync Issues with new iPod Touch 8G
Hi Guys - This my first post. Just got an iPod Touch 8G for Christmas, and I'm
having some issues with Syncíng it and would appreciate some guidance.
I previously used a Sony PSP as my portable music player, and so my music
is organised into folders, with a .m3u playlist for each folder.
To get the music and the playlist onto the iPod, I tried to use the followqing procedure:
1. Downloaded and installed iTunes
2. Registered my iPod and signed up for the iTunes Store
3. Added one of my folders to the iTunes Library
4. Synchronised with my iPod (I selected Manually manage music and videos)
Checked that all the songs were downloaded successfully to the iPod, and
play on the iPOD.
5. Imported the .m3u playlist into iTunes(File->Library->Import Playlist).
Checked it had all items and could play the tracks from the library.
For some reason, the tracks from the folder now appear twice in the
Library after this step.
6. Attempted to sync the playlist to the iPOD. The playlist has 249 tracks,
but for some reason the sync operation fails with error message "Attempting
to copy to the disk 'Joseph Olajubu's iPod' failed. The disk could not be
written to or read from".
The playlist is partially copied, with between 49 and 208 entries (depending on the sync attempt). Playing the songs from the ipod or creating the playlist directly on the iPOD works. Any idea what's going wrong here? I've tried this operation on 2 different computers with similar results. The iPOD has around 4.5G memroy free. Alternatively, is there software like Anapod available for the iPod Touch if this is an iTunes bug?
Thanks in advance for your helpBump
-
Copying file from a Compact Flash Card or Epson Picture Viewer issues
I am a photographer and have been experiencing issues when trying to copy or move files from my compact flash cards or my viewer HD device. Both my Sandisk reader and the epson connect to my iMac through USB (rear ports) and during the copy process, I get messages that one of the files are in use, and the rest of the copy is aborted. Since the copy process doesn't work in a numerical or filename fashion, I have to look through each file that has been copied and try to identify which files were missed. The weird thing is that if I try to copy the file that was mentioned in use, it works fine
I am copying to a USB External drive, connected to my Airport Extreme. I've encountered the same things when the HD was connected directly to the iMac.
I am getting very frustrated with this process, and am looking for insight on how to make this go away, or at the very least, is there an application that will copy/move and verify the files before exiting? I can't help but think that I may have missed files here and there, and those files could be now lost memories.
Any help would be appreciatedThey'll record either while simutaniously recording to tape. I believe the HDV is in a .M2t format but I'm not sure about the DV file format. As for quality, your guess is as good as mine, I haven't had the chance to play with one yet.
Mike
M2 Digital Post Inc.
San Diego, CA. -
Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes
2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first imageWhen the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie -
Hi All,
I'm facing a problem in Viewer. Whenever I customize the report(change graph style or change rows retrieval or drill up/down) , Drill Through to other reports through links are giving an error-
Warning
Do you want to save your changes before closing this worksheet?
You have not saved the changes you made to this worksheet. This worksheet must be closed to continue. Click "Yes" to save changes and continue, "No" to continue without saving changes, or "Cancel" to return to this worksheet. If you choose "Yes" and you do not own the workbook, you will be prompted to save it under a new name.
AND NEXT ON CLICKING YES/NO
Error
An error occurred while handling the event. See the application log for more details.
A fatal application error has occurred. Please consult with your OracleAS administrator or look at the application log file.
This is happening only with Viewer, in my Plus all the links , drill up , drill down are perfectly fine.
Please help me how i solve this problem.
(URGENT)
ThanksI have got the same issue
and the log file 10.1.2/j2ee/OC4J_BI_Forms/application-deployments/discoverer/OC4J_BI_Forms_default_island_1/application.log tells
09/07/03 09:31:01 discoverer: [ERROR] [Discoverer Viewer BG Worker 18] oracle.discoverer.applications.framework.Applicat
ionController._logException error.bean.delegation.failed
oracle.discoverer.applications.viewer.controllers.ControllerException: error.bean.delegation.failed
at oracle.discoverer.applications.viewer.controllers.GridController.delegateToBean(Unknown Source)
at oracle.discoverer.applications.viewer.controllers.GridController.handleBi_drill2(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at oracle.discoverer.applications.framework.RequestProcessor.execute(Unknown Source)
at oracle.discoverer.applications.framework.WorkerThread.run(Unknown Source)
at java.lang.Thread.run(Thread.java:568)
Caused by: oracle.discoiv.beans.ServerLostException: Contact with backend server lost
at oracle.discoiv.beans.proxy.server.DiscovererServer.lostMiddleTier(DiscovererServer.java(Inlined Compiled Code
at oracle.discoiv.beans.proxy.server.DiscovererServer.getPunchThroughDataProviderResultSet(DiscovererServer.java
(Compiled Code))
at oracle.discoiv.beans.proxy.DataProxy.getDataProviderResultSet(DataProxy.java(Compiled Code))
at oracle.discoiv.beans.Data.getDataProviderResultSet(Data.java:69)
at oracle.disco.bibeans.beans.BeansDataDirector.setResults(BeansDataDirector.java:206)
at oracle.disco.bibeans.DiscoDataSource.notifyListenersIfDataAvailable(DiscoDataSource.java:1059)
at oracle.discoverer.applications.viewer.model.QueryModel.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.model.ViewerModelImpl.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.controllers.ViewerController.notifyListenersDataAvailable(Unknown Sourc
e)
at oracle.discoverer.applications.viewer.controllers.ViewerController.executeQuery(Unknown Source)
... 10 more
Caused by: DiscoNetworkException java.net.ConnectException: Connection refused:host=eulxrxfr,port=34571 - Nested excepti
on: org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=eulxrxfr,port=34571 vmcid: IBM minor c
ode: E02 completed: No
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.Discoverer.closeActiveWorkbook(Unknown Source)
at oracle.disco.model.corbaserver.SessionImpl.closeActiveWorkbook(Unknown Source)
at oracle.disco.model.corbaserver.WorkbookImpl.closeWorkbook(Unknown Source)
at oracle.discoiv.session.model.ModelWorkbook.closeWorkbook(ModelWorkbook.java:234)
at oracle.discoiv.session.model.ModelEul.closeWorkbook(ModelEul.java:269)
at oracle.discoiv.state.CloseWorkbookTransition.doTransition(CloseWorkbookTransition.java:37)
at oracle.discoiv.state.ResetDrillTransition.doTransition(ResetDrillTransition.java:40)
at oracle.discoiv.state.StateTransition.moveToEndState(StateTransition.java(Compiled Code))
at oracle.discoiv.state.DiscoState.applyTransitionsAndCommands(DiscoState.java:132)
at oracle.discoiv.state.BlockingStateMachine.moveStateToDataSpecification(BlockingStateMachine.java:119)
at oracle.discoiv.state.BlockingStateMachine.processDataSpecification(BlockingStateMachine.java:72)
at oracle.discoiv.controller.discoslow.DiscoSlowRequest.executeSlowRequest(DiscoSlowRequest.java:61)
at oracle.discoiv.util.slow.Worker._execute(Worker.java:132)
at oracle.discoiv.util.slow.Worker.run(Worker.java:109)
... 1 more
09/07/03 09:31:02 discoverer: [ERROR] [Discoverer Viewer BG Worker 19] oracle.discoverer.applications.framework.Applicat
ionController._logException error.invalid.state
oracle.discoverer.applications.framework.ApplicationException: error.invalid.state
at oracle.discoverer.applications.framework.RequestProcessor.execute(Unknown Source)
at oracle.discoverer.applications.framework.WorkerThread.run(Unknown Source)
at java.lang.Thread.run(Thread.java:568)
Caused by: oracle.discoiv.beans.SessionClosedException: Session closed
at oracle.discoiv.beans.proxy.server.DiscovererServer.checkSessionActive(DiscovererServer.java(Inlined Compiled
Code))
at oracle.discoiv.beans.proxy.server.DiscovererServer.getPunchThroughDataProviderResultSet(DiscovererServer.java
(Compiled Code))
at oracle.discoiv.beans.proxy.DataProxy.getDataProviderResultSet(DataProxy.java(Compiled Code))
at oracle.discoiv.beans.Data.getDataProviderResultSet(Data.java:69)
at oracle.disco.bibeans.beans.BeansDataDirector.setResults(BeansDataDirector.java:206)
at oracle.disco.bibeans.DiscoDataSource.notifyListenersIfDataAvailable(DiscoDataSource.java:1059)
at oracle.discoverer.applications.viewer.model.QueryModel.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.model.ViewerModelImpl.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.controllers.ViewerController.notifyListenersDataAvailable(Unknown Sourc
e)
at oracle.discoverer.applications.viewer.controllers.GridController.handleDisplayData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
... 3 more
09/07/03 09:31:02 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-10] oracle.discoverer.applications.fram
ework.ApplicationController._logException error.viewer.data.missing
oracle.discoverer.applications.viewer.view.dataprovider.DataProviderException: error.viewer.data.missing
at oracle.discoverer.applications.viewer.view.dataprovider.BaseProxy.<init>(Unknown Source)
at oracle.discoverer.applications.viewer.view.dataprovider.BaseProxy.retrieveModelData(Unknown Source)
at oracle.discoverer.applications.viewer.view.dataprovider.BaseProxy.retrieveModelData(Unknown Source)
at oracle.discoverer.applications.viewer.view.dataprovider.ErrorProxy.retrieveErrorData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at oracle.cabo.servlet.event.MethodEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.invoke(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.
doFilter(ResourceFilterChain.java(Compiled Code))
at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.invoke(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.p
rocessRequest(HttpRequestHandler.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.ru
n(AJPRequestHandler.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.ru
n(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExe
cutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:568) -
GRC 10.1 Simplified Access Request and Remediation View Issues
Hi Everyone,
We recently upgraded our GRC 10.0 environment to 10.1, SP 5 and am having the following issues--has anyone else also experienced?
In the simplified access request form, it keeps telling me to enter a “valid user ID”—even though the ID is valid and works fine in the normal access request screen. Also tried to search and then select the ID in this field with the same error.
In the SoD Remediation view, I keep getting “No Data Found”, even though in the detail view, there are risks the same request:
I’ve checked the following things:
I’ve used IE 8, IE 9, FireFox, Chrome, and the NWBC to see if any of these fix the issue
I double checked the 10.1 “upgrade guide” to make sure Gateway configurations are correct
It looks like we are on the latest support packs:
Any help on this would be greatly appreciated!
Thanks,
BrettHi Brett,
For Remediation issue you can check the below thread.
http://scn.sap.com/thread/3574790
Regards,
Neeraj
Maybe you are looking for
-
Measures as Rows in Pivot Table? OBIEE 11g
Hi, Is it possible to show measures as rows and attributes as columns? I have only one value in my attribute columns. example: --------Company(Oracle)-----Country(India) Sales 100 20000 Units 50 40000T
-
Hi all I escaped from the Windows world a few weeks ago, but finding the combination of iPhoto '08 and Photoshop Elements 4 (PSE) not very intuitive and intially appears to be clumsy when opening files - not a very efficient workflow wise when compar
-
I just purchased an iphone4 to replace my 3gs. How do I sync my new phone to my computer to download my music and photos etc.?
-
What package to use to send messages in LAN? When a message is sent a graphical dialog box appears at receiver's side.
-
How do i upload a single clip for premiere elements 7 to youtube
I have Premiere Elements 7 and have created a project/moive containing 10 clips. I want to upload the clips 'separately ' to Youtube. How do I do this.In other words i don't want to move the entrie movie to Youtube- it is far too big. Thanks.