Playlists and the previous/next buttons

Once again, Encore proves to be difficult to work with. I have a bunch of m4v and matching ac3 files that I want to put into Encore to create a Blu-ray. However, I cannot place them all in a timeline and be done with it. Because of the null space at the beginning and/or end of the ac3 files, Encore insists on rebuilding them (to stereo instead of 5.1).
One thing I read as a workaround was to use a playlist. I tried that, and set the end action for each timeline to go to the next timeline. Works swell. However, there is no way to go to a previous timeline since each timeline acts like a seperate item on the disc and not as part of a whole movie. Is there a way around this? Is there a way to get items in a playlist to act like a complete movie instead of individual items?
I know another option is to just have one long ac3 file for the whole movie (as well as one long m4v video file), but this isn't really convenient. I like that Encore will tell me how much space is left on the disc as I drop items into timelines; creating one long video and audio file will leave me guessing at how long the move can be and will involve trial and error. On top of that, I will have to scrub through the whole timeline and manually add chapter marks (this is how I did it on my first project). It is a pain.
There has to be a way to use multiple ac3 files in Encore for a movie without them getting transcoded while having all the clips act as one complete movie instead of individual items. At least I hope there is a way...

Thanks for the replay. I guess what I will do is render all my video clips, drop them in Encore, and stop when I get within a couple of gigs of the disc limit. Then in premiere I will put all the clips together and render out the audio, and then drop the one audio file in Encore.
I know adding chapter markers in Encore is not hard, but it is tedious when you have one long video file and you have to scrub through the whole thing to add them.
Is there another program that will let me use multiple ac3 files in a timeline and keep them as 5.1?

Similar Messages

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?

Hi Pusman,
While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
Does that helps with your query?
Regards,
Rahul

How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.

On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
 message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
 raise form_trigger_failure;
else
 execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi.

HT201441 I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G.

Previous/Next Button Tag

In RoboHelp HTML, is it possible to add something like Main /
Previous / Next button in header / top of each topic, rather than
using the Browse Sequence.
I'm using other HAT previously, but switch to RoboHelp
recently, would like to get it back. :) Thanks in advance.

As it happens I am investigating something like this right
now, having found several problems with the Browse Sequence
mechanism.
It isn't too much work if you plan it carefully. Here's how I
did it.
I made a couple of small images (actually I grabbed the
Back/Forward buttons from Explorer) and inserted them into one
topic, at the end of the Heading 1 which starts each topic. I set
Image_Properties > Text_Wrapping to "Right" so that they appear
in the top right-hand corner of each topic. Note that if you do
this, you must insert the Right arrow first, then a space, then the
Left arrow (without the space, RoboHelp only allowed one link for
both images). I then added a screen tip to the image "Next/Previous
in sequence". Then I added hyperlinks.
After this I was able to select both images, and use
Copy/Paste to add them to all topics. When you double-click, you
get the hyperlink properties dialog, and can correct the links. I
arranged my screen so that the relevant part of the ToC was open on
the screen, so I could see where I was in the sequence.
Of course this is a PITA and error-prone, but testing is
relatively easy, if you have Auto-synchronize_TOC in Window
Properties. The buttons are always in the same place, so you can
just click repeatedly while watching the ToC.
Success!
--- Derek

I installed Firefox 4 and the Orange App button plus the reload and stop are not showing

I installed Firefox 4 and the Orange App button plus the reload and stop are not showing.

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance. 
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily. 
You can also place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top
Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar. 
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button. 
If you type in the location bar then that button becomes a Go button. 
You can middle-click that Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

Just upgraded to 10.0.2 and now it can't findwebsites - three that I know were created with WordPress. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.

I get the following error message: Gone The requested resource / is no longer available on this server and there is no forwarding address. Please remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.

Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)

My home screen is gigantic. As a result I cannot see the keypad for entering in my passcode. Somehow, everything on my home screen has expanded to gigantic size. I've tried to reset the phone by holding the home button and the on off button...

My home screen is gigantic… So much so that 1/200 of the normal screen display now fills up the entire screen. As a result, I cannot even see my keypad to enter in my passcode. I've tried a hard reset a few times (holding the home button and the on off button at the same time until the iPhone restarts). This has not resulted in any changes. Any ideas?

Thank you Lawrence. that worked! I have another question for you as well. I just got this 6 Plus and it is already saying that I am nearing the end of my storage. My iCloud is apparently 20gb and I have 6gb left. I'm attaching a screen shot. Any thoughts on how I can make available some more storage?
I Also wanted to get an enhanced quality Speech voice Alex, but it is saying I don't have enough Memory (I think it says memory because I can't read the message fully). Lastly, in your opinion does Grayscale really improve battery life above and beyond what can be achieved by closing out all apps etc. Thank you.

Latest Address and the Previous Address in the last 30 days

Morning folks.
I need to find out all Customers whose Address changed based on the Effective Date. The Query should be based as of Effective Date 01-JUN-12 and not SYSDATE. So, we want to check the MAX(effective_date) is <= 01-JUN-12 and the Previous Address's Effective Date is between 02-MAY-12 and 01-JUN-12 (30 days). This would suggest that an Address has changed. For argument sake, the Zip Code is enough to differentiate that an address has changed for now.
Based on the data, I only want to pick up Customer 1002 but not 1001, 1003. As for Customer ID 1003, even though his/her address changed in the last 30 days, we are not interested as the Address effective 1st June was good for a long time.
Also, even though the Address for Customer ID 1001 changed twice in that period, I am only interested for the latest two addresses.
Table CUST_ADDRESS
CREATE TABLE CUST_ADDRESS
 "CUST_NO" VARCHAR2(4 BYTE) NOT NULL,
 "STREET" VARCHAR2(20 BYTE),
 "CITY" VARCHAR2(20 BYTE),
 "STATE" VARCHAR2(2 BYTE),
 "ZIP_CODE" VARCHAR2(9 BYTE),
 "EFFECTIVE_DATE" DATE
);INSERT Script
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1001','123 Picket Fences','Santa Ana','CA','92704',to_date('31-MAY-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1001','12259 Circular Dr','Irvine','CA','92705',to_date('10-APR-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1001','22 Green Road','Newport Beach','CA','92709',to_date('03-JAN-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1002','12 Parkside Dr','Chicago','IL','60601',to_date('20-MAY-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1002','3200 Court Road','Indianapolis','IN','46201',to_date('02-MAY-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1003','24 Jaeger St','Bellingham','WA','98225',to_date('01-JUL-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1003','145 NE 38th St','Fort Lauderdale','FL','33334',to_date('18-JUN-12','DD-MON-RR'));
Insert into CUST_ADDRESS (CUST_NO,STREET,CITY,STATE,ZIP_CODE,EFFECTIVE_DATE) values ('1003','212 Coral Drive','Miami','FL','33010',to_date('01-JAN-95','DD-MON-RR'));Thanks a bunch.
Edited by: Roxyrollers on Jul 26, 2012 9:35 AM

Something like this
SQL> ed
Wrote file afiedt.buf
1 select *
2 from (
3 select ca.*,
4 max(effective_date) over (partition by cust_no) max_eff_date,
5 lag(effective_date) over (partition by cust_no order by effective_date) prior_eff_date
6 from cust_address ca)
7 where prior_eff_date between date '2012-05-02' and date '2012-06-01'
8* and max_eff_date <= date '2012-06-01'
SQL> /
CUST STREET CITY ST ZIP_CODE EFFECTIVE MAX_EFF_D PRIOR_EFF
1002 12 Parkside Dr Chicago IL 60601 20-MAY-12 20-MAY-12 02-MAY-12Justin

How can I get a Printed list of 'all' of my playlists and the songs that are in each list

I want to get a printout of 'ALL' of my playlists and the songs that are in each one. All at once.

And you are aware of the possible options for listing the months and having an optional export value for each month.
For listing the months, you can use a number, a 3 character string, or the full name.
For the export value, the full name, the 3 character value, the 1-2 number, or the 0-11 JavaScript value.
I would look at deciding how you want to populate the drop down box and build a one page form with just this field. You can then insert that page into a PDF and copy the field as needed and then delete the inserted page. Or you could create an FDF file to create the drop down box.

My ipod touch is not recognized on itunes and will not turn on or give me the battery sign. I have tried toubleshooting it by holding down the home button and the sleep/wake button, but it doesn't work. What do I do to fix it?

My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?

Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?

I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?

it recognizes the iPOD but I can't get any of the new songs to import to the iPOD
are you getting an error message, Odessa? if so, what does it say? include error message numbers if you're getting any.
if you're not getting an error message, describe what happens when you try to transfer songs to the ipod as best you can.

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost.

In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost. At the time, Apple was still offering the e-chat, so I did that and the man was very helpful and it was a quick fix, so my download button turned green again, and I was able to begin the download. BUT during the download, I was kicked offline once again, and I decided to wait until I was back in the USA. I will go in to an Apple store and ask assistance, but if there is something I am missing, I'd like to try that first. Thanks in advance for any advice.

Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you.

I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?

I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?
I recently bought a Samsung Galaxy S4, and my wife has an iphone. We found out that imessage wont come through from her. After we went to the AT&T helpdesk they said that she could turn off imessage on her phone and that I would get texts on my S4. But then so would everyone else who has an iphone. That won't work for everyone in my company that has an iphone. So what I am wondering is- since I recently got this phone, should I get a new number? Or should I contact ATT or contact Apple to try and get this number de-activated? I'm thinking I'll never get into the icloud account that this number is attached to, but maybe someone has some advice on that?
I just sincerely want imessage to work on this phone and I'm willing to take the steps to do that.
Please help

Either one of the two should work - getting new number from carrier or contacting Apple to revoke phone number from imessage system.
That is if your problem is described correctly.

Playlists and the previous/next buttons

Similar Messages

Maybe you are looking for