Playlists: any way to control how often a track is play

I'm currently running a playlist of albums on my ZVM, but only get through about an hour's worth on the way into work, then pause. By the time I restart (usually that evening or the next morning) the ZVM needs to be taken out of standby, picks up the playlist where it left off. So far, so good.Problem is, if a track has been played the previous day it seems to be a likely candidate to be played again today. In other words, once a track is played off a playlist it doesnt necessarily prevent it from being played again. This is, of course, on Shuffle mode.Any ideas if, and if so, how I can limit each track to playing just once in any selected playlist?ThxTroll?

Hi Mark,
You need to do this only once as long as the distiller is alive. After the distiller dies out, you will need to do it again before next save as PDF operation. A simpler approach would be to do it every time.
FrameMaker does some post processing on the generated PDF after the distiller finishes, which might be taking time. Specifically, the post-processing is needed if the document has rich media / U3D embedded in it.
If there is no such requirement, you can disable the post-processing clients in maker.ini file (/maker.ini) but this is not the recommendation. The clients are:
·         FRAME2pdf – for 3D
·         FMMediaAnnot – for rich media
·         FMPDFReflow – for enabling some accessibility features in acrobat (Only for tagged PDF).
~Harish

Similar Messages

Any way of knowing how many times a purchased playlist has been burnt?

Is there any way of telling how many playlist burns you have left of the 7 allowed for purchased songs (playlists)?
-Frankie

hi,
use STAD transaction.

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

PLW-07203, any way to control the PLSQL_WARNINGS values specified by Raptor

While debugging some packaged code and compiling the specification through Raptor, I got the PLW_07203 warning, which was deemed to be an error and therefore prevented me from compiling the code successfully in Raptor.
First, is it correct for Raptor to consider these types of compilation warnings to be errors?
Second, since Raptor sets the PLSQL_WARNINGS parameter for the session, is there any way to control that parameter setting? For now, it seems to always specify it by executing ALTER SESSION SET PLSQL_WARNINGS = 'ENABLE:ALL'.
Third, is it possible for Raptor to tell that I've loaded the source for a package specification or body from the data dictionary and have made no changes to it before I ask it to be compiled? Now, it seems that Raptor always is recompiling the package code by using the CREATE OR REPLACE construct, so it will overwrite any existing PLSQL object settings that may have been defined for the code previously. If you could detect that I'm simply asking you to recompile the source (primarily to simply get it compiled with debug information), then you could use the ALTER PACKAGE syntax for the recompilation. That with the ability to specify whether or not the REUSE SETTINGS clause would allow people to compile packages without getting into problems from Raptor changing the PLSQL_WARNINGS session parameter.

1) It's already bugged.
2) This is planned for production
3) There's a right click compile from dictionary which just does an alter ... compile. The new drop coming this week will change how browsing code works so that there's a read-only copy with an edit button to launch the editor.
-kris

Controlling how often my Q10 syncs with my Gmail account

I cannot seem to control how often my Q10 syncs with my Gmail account. I have adjusted the settings for Gmail, Calendar, and Contacts several times, but it seems to pull the emails frequently (within an hour) regardless of the setting. I want to control the syncing manually. What am I missing? The phone is brand new and unlocked, running on AT&T, and this happens regardless of whether I am using WiFi or not.
Thanks!
Solved!
Go to Solution.

Hi and Welcome to the Community!
A few possible variables...
1) What do you have set for "Use Push if Available"
2) How exactly is GMail integrated? EAS? IMAP? POP?
If the answer to item 1 is yes AND you have GMail integrated as IMAP, then the time interval setting is ignored. If integrated as EAS, it may also be ignored as well as the "Use Push..." setting might also be ignored. If integrated as POP, then there is no Push, so your time interval settings would be utilized.
So, depending on the combination of factors, it may or may not be doing exactly now what it should be.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Non-Apple Keyboard: any way to control system audio volume?

I have a non-Apple Keyboard on my new Mini Lion 7.2.1
Is there any way to control system audio volume via the keyboard ?

Well. I can do this. But just because, on my Apple keyboard, there are the keys that do the job. There's a key to mute, and the keys to adjust low and high the sound. But keyboard shortcuts, I don't think exist. The aren't in keyboard shortcut in Keyboard panel, within System Preferences. The bottom line is that isn't a menu item in Finder for lower sound and higher sound. The only option would be an AppleScript that you save as an applet within Scripts menu (activated in Finder via Script Editor) and you invoke with a shortcut... Well, you can do it, if you open the script Set Output Volume in UI Elements Script folder within Scripts folder. Try it out!

Is there any way to control automator through voice commands?

is there any way to control automator through voice commands?
Im simply trying to program my macbook pro early 2011 8gigs ram to resound to voice commands using automator but I haven't found any discuss on the subject.

I have some AppleScript that expects a Pages (v5.2.2) document opened. It will then then speak the document name, and the count of words in the document. Or, I can trigger Speakable items and tell it to, "Switch to Pages" which it does immediately, because this is part of its repertoire of built-in commands. Then speak Word Count?
In Automator, I created an Application, in which I dragged/dropped the Library > Utilities > Run AppleScript action into the workflow window. I replaced the AppleScript boilerplate with my existing AppleScript code that speaks the word count, and saved the Application into <login dir>/Library/Speech/Speakable Items folder as Word Count? (without the .app extension). It can also be saved in the Application Speakable Items > Pages sub-folder under the general Speakable Items folder.
Next, I turned on Speakable Items in System Preferences > Accessibility > Speakable Items.
It took several tries to get a spoken result from the Automator application, but it did work. Even with a calibrated microphone, and speaking about 18 inches from it. About 2 successes for ten tries. If I just put the AppleScript (without extension) in the same folder, my success rate would improve to 5/10. You may grow very weary of the repetition necessary to get Speakable Items to work. A small pink text banner also appears with the spoken content in it — below the Speakable Items monitor on the screen.
Automator is scriptable. This means that in AppleScript, you can dynamically build an Automator workflow, and then execute it.

Is there any way .? how can i see. what going on my code

hi jdev experts,
am using jdev 11.1.1.5.0 - adfbc
i have a amimpl classes i want to see the each and every value of the row, while perform each and every for loop
is there any way .? how can i see. what going on my code
can anyone paste simple video link regards this?

Hi,
what about debugging ? Just set a break point and run the Debugger (the red run icon). Or you use logging http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part to print out for each row whats going on
Frank

Any way to tell how many GB's an iPhone 4S has without setting it up?

I just got a new iphone 4S (with no box) as a replacement for a broken one from the Apple store. I have a new iphone 5C that is already set up on my account. Is there any way to tell how many GB's the 4S has without setting it up since I just want to sell it and want to know how many GB's it has before I list it.

The same as the one replaced. What does it say on the receipt?

HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

If you have registered all your Apple products, you can see them at:
https://supportprofile.apple.com

Is there any way to control or change the email notification format deliver

Hi,
Is there any way to control or change the email notification format delivered by iBots? I have created an iBot to deliver the scorecard report to the team with type chosen as 'Attachment (HTML)' option. With this definition of iBot - notification being sent in MIME HTML (.mht) format. Due to some security settings at my email client - the attachement gets quratined because of .mht format. So, I am looking for an option to send the notification only in HTML (.htm) format with which I don't have any issues with my email client?
Any help is really appreciated.
Thanks,
Vency

Hi,
You try this
change format of to whichever you required in this file.. I havn't tested it yet..
I hope it will help you..
thank you
E:\OracleBI\web\app\res\b_mozilla\delivers\deliverycontenteditor

Is there any way to know how much time swing client is on open state?

Is there any way to know how much time swing client is on open state? My requirement is to show a message some time after the swing client open i.e., 4-5 hours.

You could also consider using javax.swing.Timer and java.awt.event.ActionListener (or javax.swing.Action) which takes care of running the actionPerformed code on the EDT.
db

Any way to control money input?

Is there any way to control money input, I mean for example
If someone inputs 12.52356 dollars I have to control it until the user inputs 2 digits after the decimal dot.

BTW using floating point numbers to represent money is not very accurate. You would be better to use whole numbers and then only convert to floating point when you want to display it. So for 12.87 you would actually use 1287 instead. Check out the following.
double dollars = 12.87;
double change = dollars - 4 * .45;
System.out.println(change);
int money = 1287;
int remainder = money - 4 * 45;
System.out.println(remainder / 100.00);Output:
11.0699999 - inaccurate
11.07 - accurate

Any Way To Control Fans Under XP With MBP?

Is there any way to control the fans under XP of a MBP?
To stop the thing getting so hot - in OSX I use various - but XP?

Also i want to say than you MUST control your fan in MBP not just in xp also in osx.
And you can install Core Temp for see the current temp
http://www.alcpu.com/CoreTemp/

Is there any way to control an iPod with a lock via USB cable?

I have an iPod touch 4th generation, but I dropped it. The touchscreen no longer works, which is most likely a hardware error (I've tried resetting it). I plan to get a new device, but before that, I would like to be able to unlock it to access certain files and transfer codes inside. I know the lock password to my iPod; is there any way I could control it with my computer?
Thanks.

You may be able to get some info from the restored/erased iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html
-iPod touch Deleted Photo Recovery Tips You Should Know

Playlists: any way to control how often a track is play

Similar Messages

Maybe you are looking for