PlayReady update incomplete - W7 64-bit RTM

PlayReady update never completes.
I have tried every "fix" I could find in these forums, and nothing works permanently.
It was not a serious issue until I was forced to use cable boxes from my service supplier. When I had the coaxial cable connected directly to my Hauppauge 2250 tuner card without the cable boxes, I was not affected by the PlayReady technology.
Since using the cable boxes, I have had recordings blocked with the message that provider does not allow viewing except on the computer the recording was recorded on. The recordings are not shared and only watched on the computer they have been recorded
on.
These issues go all the way back to Beta and RC. Whatever the glitch is, if Microsoft has not fixed these issues, PlayReady has to be disabled until Microsoft can permanently fix them.
I either need a link to the fix, if it exists, or how to disable PlayReady so it does not interfere with watching recordings on the computer they were recorded on.
PlayReady has even blocked the signal during TV Signal setup. It is very annoying having to go through setup two or three times because of this.

No good with disabling the A/V. PlayReady still does not complete updating. It will not work no matter what I shut down. I have tried different selective start-ups and "Safe Mode" variations, it just will not work. It is the same problem as reported
by many others.
Is there a link for uninstalling and reinstalling PlayReady. The only link I found was from 2009, so don't know if it is still relevant.
PlayReady is not only causing issues with play recordings, it is also preventing me from watching channels I pay my cable service provider to watch. My regular TVs have no problem with these channels. Microsoft has to disable this service if it not going
to operate 100% correctly all the time. PlayReady is costing me money.
As I stated in my original post, I have done ALL the tricks, tips and work arounds located in the forums. I have used the installer (which I don't know if was latest or not since there was no dates on the Microsoft Tech web page) to uninstall and then reinstall
PlayReady.
PlayReady has been a problem since at least last year (2010). I know it was definitely not working after the Update associated with KB2284742. Not sure about before than because I did not have a cable tuner box from my cable service provider back then.
I ignored the PlayReady issue until now because it did not affect me since I did not have the cable tuner boxes before this month (March). Now I get constant "blue screens" (not BSOD) on certain channels informing me the service provider only allows recordings
to be played on the original computer it was recorded on. And as noted above, some channels I pay for are blocked from viewing "Live". This computer does not share files or recordings.
Please inform me of the advanced trouble shooting procedures as I am tired of doing the same basic trouble shooting over and over again just to have the same results the first 100 times I did them.

Similar Messages

Can not update Photoshop CC (64-bit) 14.0 to 14.2

Can not update Photoshop CC (64-bit) 14.0 to 14.2. Initially the Adobe Creative Cloud Desktop application would also not update (an error message was generated), and I was getting an error message when I attemped to update Photoshop CC using the Application Manager. Once I fixed the Creative Cloud updating problem, I ran the update from the Creative Cloud application and it appeared to work. On checking I found that the 32-bit version of Photoshop CC was updated but not the 64-bit version. When I bring up the Creative Cloud application it tells me Photoshop CC is up to date, even though the 64-bit version is not. Even the Application Manager brought up in Photoshop CC (64-bit) tells me Photoshop is up to date.

if there's an error message, attach a screenshot of it - http://forums.adobe.com/thread/963429
otherwise, use - http://helpx.adobe.com/creative-suite/kb/troubleshoot-update-issues-cs5-cs5.html

Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William

Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William

reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates.

Camera Firmware Update Asking for 32 bit Kernel?

I'm updating my Sony DSLR camera firmware and it rejects doing the update because of 64 bit kernel and asking for 32 bit??
What needs to be done to accomplish that?
Gene

Forgot to mention, I did do a search & tried the reboot while holing down 2 & 3 keys to no avail. Tried Restart & then Shutdown - didn't work
Gene

Browser unable to update the service status bits

I am having an issue with my computer becoming non-working. After a period of time of inactivity and then I go to use the computer, I can move the mouse cursor around but can do nothing else. I have noticed that when moving the cursor around that when I move it to the task-bar I get the hour glass waiting icon. I checked the event viewer and in the applications log I have numerous errors which say "The browser was unable to update the service status bits" Can you explain this and are there any fixes? Thank you

Hi Avinash,
Yes, CTS_BROWSER service is active. It was working before when I click to test. Unfortunately, it started throwing error. We are on SP13 in SOLMAN. I'm using solman as an ABAP stack.
Thanks for your time.

I just updated an iPod touch bit my pictures where lost is there any way I can downgrade and get my pictures back??

I just updated an iPod touch bit my pictures where lost is there any way I can downgrade and get my pictures back??

If the photos were synced to the iPod they are not in either an iTunes or iCloud backup.Y may be able to get them from the updated iPod
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

Multiple failures after updates Windows 7 64 bit Home Premium

After loading the latest set of updates for my Windows 7 Home Premium 64 bit operating system and rebooting, I am now experiencing a cascade of failures. None of my network (wireless or ethernet) adapter or miniport drivers
will load. my firewall will not load or has failed. I cannot logon to my Event Viewer to figure out what failed and my Microsoft NET is giving me errors when I try to access anything that might help me figure out what went wrong. So far I
have done a system restore back to before the update, but it did not fix the problems. I have tried to use Microsoft Fix it, but that must access the internet. I am sending this from a different computer because I cannot get online with the other.
Can anyone give me a clue where to start fixing these problems or do I have to completely reinstall my operating system?
Thanks.

Hi,
In this case, you can try repairing windows image using DISM command.
http://technet.microsoft.com/en-us/library/hh824869.aspx
If it still can't work, please make a repair install to fix your system.
http://support.microsoft.com/kb/2255099
Andy Altmann
TechNet Community Support

6490m driver update windows 7 64 bit

Hi together,
I own a early 2011 MacbookPro with an AMD Radeon HD 6490M graphic card and an Intel 3000 HD in addition.
I installed Windows Ultimate 64 bit via bootcamp.
Now I'm facing the error, that the driver I installed by Apple Support Folder (downloaded before in MacOS by bootcamp assistant) ist very old (begin 2011) and I'm not able to install the driver. It says that there is no correct graphic hardware at my system. The AMD Homepage says that 6400M series is supported but I can't get it to work.
Afterwards I installed the latest beta driver (12-8_vista_win7_win8_64_dd_ccc). It installed with no problems but afterwards hardware manager reports that I'm having a AMD 7700M graphic card (I don't remember the name cause I uninstalled it because of extreme bad performance - more laggy then before).
Now I read several threads in here and found a driver version of 11/2011. That one install a graphic card which is called 6400M which usually would be right cause it's the 6400 series. But this driver had same bad performance (40-60fps in counterstrike 1.6) like the other one.
Does anybody now where I can get the latest driver including catalyst center for my AMD Radeon HD 6490M?
It would be really nice if anybody could help me.
I'm sorry for my bad english. If there are any questions please ask.
Regards and thank you!

Graphic switching on Macs only works within OS X. When in Windows, the discreet GPU runs all the time. This is the way it has been since Apple introduced systems with multiple GPUs. And being that I actually own a machine similar to the OP's that runs both Windows and OS X, and you own an HP, it goes without saying that I know more about this than you do.
To the OP, the correct drivers can be downloaded by following the link at the bottom of this page:
http://www.guru3d.com/files_details/amd_catalyst_12_10_whql_download.html
Before installing, make sure you have the Microsoft .NET framework 4.0 and all its security updates installed on your machine.
Uninstall the drivers you have now via control panel/programs and features, reboot, and run this package from the link above. When it finishes, reboot, and it will display "AMD Radeon HD 6400M Series" in device manager. This is the correct naming scheme when you install drivers that are not directly provided by Apple. I have the same set installed on mine, and it says "AMD Radeon HD 6700M Series."

Slow updations (Oracle 11g 64 bit enterprise edition on Linux RHEL)

I have created Following table for profiling updates per second in Oracle Database
Test(RecordId number,Desciption varchar2(2000) //Btree Index on record id only
Table has 10000 records only.
I did updation for every record in loop by follwing query(Stored procedure executed on same server where database exists no network is coming in picture)
update Test set description = description + 'something' where Recordid = i (loop counter)//existing description has 1000 characters
I am wondering that updation of only 10000 records was taking 100 Seconds.
I was expecting atlease 1000 records/second but it is 100 record/second
Can anyone help to correct me and tell how can we improve database updations?
Processor Dual proc dual core
Raid with reading speed 2.5Gbps
OS : Linux RHEL
Database:Oracle enterprise edition 64 bit.
sga_max_size = 1.5 GB
Any help will be highly appreciated.

You are running a loop but Oracle will give you read consistency.
Oracle is probably cloning some of the datablocks as it re-reads them because
it finds that the block has been previously updated.
That sort of a loop is absolutely the wrong way to test Oracle.

How can I update to a 64 bit version to play games on facebook & zynga so I won't have any farther problems?

I have windows 7 Home Premiun 64 bit bit computer & I use Google Chrome to play games on Facebook & Zynga. My Shockwave on my computer is 32 bit. How can I update so I won't have any farther problems?

Shockwave Player is strictly 32-bit only.
Most games on Facebook and Zynga use Flash Player, not Shockwave Player.
Flash Player is 32-bit and 64-bit, but you need to run it on a 64-bit browser.
If you have more questions about Flash Player, ask in the FP forum.

Problems with the windows update site in 32-bit Vista Business

Hi Everyone,
I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

hello
You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

1.8 update 40 rpm 32 bits Dependency error

hello,
jre-8u40-macosx-x64.dmg
jre-8u40-windows-i586.exe are OK
jre-8u40-linux-i586.rpm: md5: d03360a9192d26a71770206a4257b470
openSuse 12.4
Can not install files: Dependency error ,
while up31 no problem even after reinstallation.
I do not have 64-bits version to test jre-8u40-linux-x64.rpm.
Error message:
in French "La résolution des dépendances a échoué - Apper
Impossible de trouver une dépendance de paquetage"
translation: "Dependency resolution failed - Apper
Can not find a package dependency "
Details > > nothing provides /usr/sbin/alternatives needed bye jre1.8_40-fcs.i586
A+

hello,
only with rpm,
it's OK on Ubuntu jre-8u40-linux-i586.tar.gz (md5sum: b22953df20789fc199877ad7d615d51e)
it's the same error with 64 bits.
jre-8u40-linux-x64.rpm (md5sum: 1802527c440523d6d9990cb8477593ea)
version openSuse 12.3 (Sorry but I have not updated 13.1)
A+

Updating from Vista 32 bit to Win'7 64 bit.

Hi,
I Currently own a Windows Vista 32 bit OP,
I would like to update to Windows 7 64 bit.
Is that possible?
This question was solved.
View Solution.

Clean install: Yes
Upgrade: No
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Jre 6 update 20 on 64-bit Windows 7 - Could not load the Java Virtual Machi

Hi,
I download and installed jre 6 update 20 (64-bit) on Windows 7 (64-bit).
I ran a 3rd party Java application and I got the error saying 'Could not load the Java Virtual Machine.'.
I found that the jvm.dll is installed under c:\Program Files\Java\jre6\bin\servere folder.
I checked the registry and the JVM is pointing to c:\Program Files\Java\jre6\bin\client folder.
May questions are:
1) Why does the registry point to the clinet folder instead of server folder?
2) Should I change my registry entry to point to the server folder to fix my error - Could not load the Java Virtual Machine?
3) Is there a better way to fix the issue besides chaning the regiatry?
Thanks.

Hi Igor,
I don't have proxy, neither vpn. Everything works with Java 1.6 with the same Java settings.
I tested the jnlps also with janela and the syntax seems OK.
What kind of test you mean?
I wrote this kin of code and this works also:
<pre>
try {
URL url = new URL("http://argouml-downloads.tigris.org/jws/argouml-latest-stable.jnlp");
URLConnection con = url.openConnection();
con.setDoInput(true);
con.setDoOutput(true);
con.getOutputStream();
con.getInputStream();
Logger.getLogger(App.class.getName()).log(Level.INFO,"OK");
} catch (MalformedURLException ex) {
Logger.getLogger(App.class.getName()).log(Level.SEVERE, null, ex);
} catch (IOException ex) {
Logger.getLogger(App.class.getName()).log(Level.SEVERE, null, ex);
</pre>

Trex update on AIX 64 Bit

Hi Experts,
We are running TREX 7.0 Rev 42 on AIX 5.3 64 bit system. I want to update my Trex from Rev 42 to Rev 50.
On SAP market place I could able to see only 32 bit version for AIX is available.Could you please help me in finding 64 bit version or I can use 32 bit patch on my 64 bit AIX 5.3 system
Thanks,
Akram

Hi Akram,
Trex 7.0 is a 32 bit application that can run on 64 bit operating systems in compatibility mode.
Yes you can use the 32 bit patch available on sap marketplace to upgrade trex.
Kind regards,
Barry Cunningham

PlayReady update incomplete - W7 64-bit RTM

Similar Messages

Maybe you are looking for