Plays automatically when plugged into a device

Hi. My touch is running version 3.1.1. When I plug my touch into a device, usually my clock-radio which has a built in cradle, it starts playing the first song from my library automatically. Is there a way to prevent this? Very irritating when I have another app running - such as a radio app, and the library takes over...

Jimbo550 wrote:
... but will not charge from the mains, any advice? ...
1) Check the Mains outlet is ON...
2) Try a different Charger...

Similar Messages

Using music app on Iphone when plugged into a device

A feature I would like to see added is being able to control my phone through the music app when it is plugged into a device rather than it being disabled. I mainly listen to music in my car and my radio interface is not very user friendly when it comes to navigating through my music. However if I use pandora when I plug in my device I can control the app from my phone. This is a feature that should be compatible with the music app so that I can control it through my phone which is more user friendly.

Try a reset when your iPhone is plugged into the charger as you say it does not respond when not plugged in...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
See if it will charge after this.

Ow do I stop the ipad from playing music automatically when plugging into my car?

I'd like to play my Scorch application through my car speakers but the iPad starts my music instead and doesn't give me an option to not play it. Anyone know if it's possible to change it so it doesn't start automatically?

I have the same issue. Was attending a major conference, sitting in the VIP section, and suddenly in the middle of the keynote address, I heard music playing, coming from my leather bag. Struggled to turn it off quickly before disrupting the event, but alas I wasn't quick enough. Also have the new iPad. Have tried everything, but it keeps launching sometime after I close the cover. Need a solution, please!

Disable iPhone from playing music when plugged into USB in vehicle?

Drives me crazy because when I plug iPhone into my USB on GMC Terrain it goes to iPhone music. How can I stop this?

I agree with this persons comments. Toyota insists that this issue is caused by the Apple iphone. The car is only receiving the signal.
I have attempted to remove all music files from the iphone, but the iphone will not allow me to do this. It automatically saves one music file in memory and then plays that song EVERY time I plug the phone into my car.
It might be time to try a Samsung phone...

How come my Ipod Touch will only charge when plugged into a computer and not a docking station or wall socket?

My IPhone works with both the charging USB cable as well as the wall socket and docking station. Additionally, my IPod used to charge using both the wall socket plug in and the docking station. My IPod will stay play music when plugged into the docking station, but won't charge. Further, when I plug my IPod into my computer all it will do is charge and is not recognized by ITunes. I have done both a soft and hard reset.

If the iPhone has no problem with the same cable then
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Iphone 3g not recognized by computer(s). Windows 7. Charges when plugged into wall, but not PC's. Also not listen in Device Manager. I have hard reset/soft. reinstalled itunes after clean wipe. went through services... help! Windows 7

Hello all. My system is Windows 7 64bit. In the past my phone worked just fine, plug it into a usb slot, synced up, updated... but for months now it has not worked. Other Iphones will not work on this PC either with their corresponding cables. But my Iphone will also not work when plugged into other computers.. it will not show up at all.. no charge.. no itunes... no drivers show up in Device Manager. My phone works just fine when plugged into the wall with it's cable.. charges fine everything works.. but it will not charge when plugged into a computer.
So far... I have uninstalled everything related to apple... ran ccleaner.. fixed registry errors. Reboot PC, reinstall all itunes and apple components (all latest software) and nothing.
I have gonet o services and stopped and started apple mobile device. It is set to automatic.
I have hard reset the phone and soft reset it.
The cable obviously works. The Phone works when plugged into the wall.
Other Iphones will not work on my pc, nor will my iphone work on theirs
I have disabled windows firewall along with my Comodo Defense Plus and it's firewall. I have disabled my AV. I have scanned with ad aware plus, Avast, ran hijack this and fixed registry errors. Ran Ccleaner.
My device manager does not have anything related to apple in it.. I have no idea why. My Device Manager has no portable devices detected at all and does not recognize anything related to the phone.
Core 2 duo 6600
2gigs of ram
Windows 7 64 bit
I have checked all the tech support stuff I can find. I am desperate. Apple will not help me on the phone without charging me 30$.

Also.... my phone works and can do everything fine when not plugged in.. I just can't get my computer or others to recognize the darn thing when plugged in!

With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

Having same issue here:
https://discussions.apple.com/message/19043181#19043181

ITunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

iTunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

When I connect it to my iMac (with up-to-date OS X Yosemite 10.9.5) - it doesn't work.
Specifically - iTunes automatically launches, but then quickly shows a dialog window that says, "iTunes could not connect to the iPhone. This device is no longer connected."
Meanwhile - on my iPhone - in the upper right-hand corner (where the battery life is displayed) - you can see the "plugged in" icon (lightening bolt) rapidly blinking on and off.
In other words - it seems like, when it's plugged in - it's rapidly connecting and disconnecting (several times per second).
If I click "OK" on that dialog window on iTunes - it instantly pops back up, and continues to do so as long as I keep the iPhone plugged in.
I have tried all and stile did not resolve my problem. I tried to restart both devices, try different cable (I have original cable). Both devices are new and software's are update it on latest versions.
Thanks in advance for any help!

IPhone will not charge when plugged into computer

My phone was not working, and so I took it to the apple store nearby. Here were the problems:
-error message saying "this device not made to work with iPhone"
-would not charge when plugged into computer OR wall charger
-person on other end of phone calls said i sounded really far away and had trouble hearing me
-when i shut it off, it restarts itself immediately
-cant do a manual reset holding the power and center buttons at same time
-when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
Is there any way they will replace my iphone at no charge?

Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

BSOD when plugging into Dynadock U3

Hi There,
We have a wide number of Toshiba Dynadock u3.0's working with a number of Sony Vaio Laptops. In the main they have worked pretty well, and have improved over time as new releases have come out.
At the moment we are rolling out the new Sony Vaio Pro laptops, and Dynadock is almost essential for users because the Vaio Pro's do not have an ethernet adapter. We are also downgrading them to Windows 7 from Windows 8 as we are not ready for Windows 8 on a large rollout, and holding off till 8.1 goes live.
We have had a couple of blue screen of deaths on 2 Vaio Pro's when plugging into the Dynadock. Both have the latest dynadock drivers, and we have obtained the memory dump for the machines. Before they were plugged in, they were on the WLAN in the office.
The other half a dozen devices we have in use at the moment have not yet reported this issue, and the BSOD has appeared on these two devices only once each, but I was asked to report this issue on these forums to just confirm there is no obvious issue with the Dynadocks.
In the meantime we have 3 other Vaio pros which are being tested and have not yet experinced the same issue.
Memory Dump below:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Scratch\100813-9796-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`020dc022?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00226022?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.22411.amd64fre.win7sp1_ldr.130801-1934
Machine Name:
Kernel base = 0xfffff800`03263000 PsLoadedModuleList = 0xfffff800`034a76d0
Debug session time: Tue Oct 8 11:46:36.236 2013 (UTC + 1:00)
System Uptime: 0 days 3:57:23.966
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 1000009F, {4, 258, fffffa800672db50, fffff80000b9c3d0}
Unable to load image \SystemRoot\system32\drivers\DNPFW.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DNPFW.sys
*** ERROR: Module load completed but symbols could not be loaded for DNPFW.sys
Probably caused by : tcpip.sys
Followup: MachineOwner
0: kd> !analyze -v
*                        Bugcheck Analysis                                    *
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
   subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa800672db50, The thread currently holding on to the Pnp lock.
Arg4: fffff80000b9c3d0
Debugging Details:
DRVPOWERSTATE_SUBCODE: 4
IMAGE_NAME: tcpip.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51d78659
MODULE_NAME: tcpip
FAULTING_MODULE: fffff88001800000 tcpip
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
STACK_TEXT:
fffff880`03507ed0 fffff800`032cb972 : fffffa80`0672dc10 fffffa80`0672db50 00000000`00000000 00000000`0000000d : nt!KiSwapContext+0x7a
fffff880`03508010 fffff800`032dcd8f : 00000000`00000001 00000000`00000000 00000000`00000000 fffff880`01801d60 : nt!KiCommitThreadWait+0x1d2
fffff880`035080a0 fffff800`03332ee6 : fffff880`01801d00 fffff880`00000000 00000000`00000000 00000000`00000000 : nt!KeWaitForSingleObject+0x19f
fffff880`03508140 fffff880`0180289a : fffffa80`07609a10 fffffa80`071db1a0 00000000`00000000 fffffa80`000e0082 : nt! ?? ::FNODOBFM::`string'+0x12ef6
fffff880`035081b0 fffff880`0174f375 : fffffa80`0a1cf8d0 fffffa80`00000000 fffff880`03508438 fffffa80`071db1a0 : tcpip!FlUnbindAdapter+0xaa
fffff880`03508280 fffff880`01760adf : fffffa80`071db1a0 00000000`00000000 fffffa80`0a3357c0 00000000`00000000 : ndis!ndisUnbindProtocol+0x205
fffff880`03508390 fffff880`01761c5b : 00000000`00000001 fffffa80`071db1a0 fffff880`03508420 00000000`00000001 : ndis!ndisCloseMiniportBindings+0x2df
fffff880`035084a0 fffff880`016fabc2 : fffffa80`071db1a0 fffffa80`071db1a0 fffffa80`0cecfc10 fffffa80`071db1a0 : ndis!ndisPnPRemoveDevice+0x25b
fffff880`03508640 fffff880`01764dc1 : 00000000`00000000 fffffa80`0cecfc10 00000000`00000000 fffffa80`071db1a0 : ndis!ndisPnPRemoveDeviceEx+0xa2
fffff880`03508680 fffff880`01ba6537 : 00000000`00000300 00000000`00000000 fffff880`03508848 00000000`00000000 : ndis!ndisPnPDispatch+0x862
fffff880`03508720 00000000`00000300 : 00000000`00000000 fffff880`03508848 00000000`00000000 00000000`00000020 : DNPFW+0x9537
fffff880`03508728 00000000`00000000 : fffff880`03508848 00000000`00000000 00000000`00000020 00000000`000007ff : 0x300
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
Followup: MachineOwner
0: kd> lmvm tcpip
start             end                 module name
fffff880`01800000 fffff880`019fe000   tcpip      (pdb symbols)          c:\symbols\tcpip.pdb\494FAD1F538A4ED5A2BF3CC62A5FFFCB2\tcpip.pdb
    Loaded symbol image file: tcpip.sys
    Mapped memory image file: c:\symbols\tcpip.sys\51D786591fe000\tcpip.sys
    Image path: \SystemRoot\System32\drivers\tcpip.sys
    Image name: tcpip.sys
    Timestamp:        Sat Jul 06 03:52:09 2013 (51D78659)
    CheckSum:         001D78AE
    ImageSize:        001FE000
    File version:     6.1.7601.22378
    Product version: 6.1.7601.22378
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.6 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     tcpip.sys
    OriginalFilename: tcpip.sys
    ProductVersion:   6.1.7601.22378
    FileVersion:      6.1.7601.22378 (win7sp1_ldr.130705-1532)
    FileDescription: TCP/IP Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.

Same user, different error, but still a BSOD.
Turning on the laptop when plugged into the dynadock, and he gets a BSOD. I've pasted the bugcheck in below. We are in the process of uninstalling and reinstalling all the drivers, and replacing his dynadock with a known good one to determine if the issue resides with the laptop or not.
*                        Bugcheck Analysis                                    *
ACPI_BIOS_ERROR (a5)
The ACPI Bios in the system is not fully compliant with the ACPI specification.
The first value indicates where the incompatibility lies:
This bug check covers a great variety of ACPI problems. If a kernel debugger
is attached, use "!analyze -v". This command will analyze the precise problem,
and display whatever information is most useful for debugging the specific
error.
Arguments:
Arg1: 0000000000001000, ACPI_BIOS_USING_OS_MEMORY
   ACPI had a fatal error when processing a memory operation region.
   The memory operation region tried to map memory that has been
   allocated for OS usage.
Arg2: 0000000000000000, The high portion of the physical address of the memory region.
Arg3: 0000000000000ff0, The low portion of the physical address of the memory region.
Arg4: 0000000000000025, The length of memory being mapped.
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA5
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff88000fa330f to fffff8000328cf40
STACK_TEXT:
fffff880`03723a58 fffff880`00fa330f : 00000000`000000a5 00000000`00001000 00000000`00000000 00000000`00000ff0 : nt!KeBugCheckEx
fffff880`03723a60 fffff880`00fa5cfe : 00000000`00000ff0 00000000`00000000 00000000`00000000 fffffa80`07d59000 : ACPI!MapPhysMem+0xcf
fffff880`03723ab0 fffff880`00fae0c0 : fffffa80`07d684f0 fffffa80`07d59000 00000000`00008000 00000000`00000000 : ACPI!OpRegion+0x136
fffff880`03723af0 fffff880`00fa8ac2 : fffffa80`07d59000 00000000`00000000 00000000`00008000 00000000`00000000 : ACPI!ParseTerm+0x17c
fffff880`03723b30 fffff880`00fa61a6 : fffff880`00fb90e0 fffff880`00fb9ac0 fffffa80`0671d740 fffff880`00fb90e0 : ACPI!RunContext+0x86
fffff880`03723b70 fffff880`00fa1054 : fffff880`00fb91e8 fffff880`00fb9ac0 fffffa80`0671d740 fffffa80`099f09a8 : ACPI!StartTimeSlicePassive+0x8a
fffff880`03723ba0 fffff800`0352d6ee : fffffa80`066d0b50 00000000`00000080 00000000`00000001 00000000`00000000 : ACPI!ACPIWorkerThread+0xd8
fffff880`03723c00 fffff800`0327df26 : fffff880`03100180 fffffa80`066d0b50 fffffa80`06748660 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03723c40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
ACPI!MapPhysMem+cf
fffff880`00fa330f cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: ACPI!MapPhysMem+cf
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: ACPI
IMAGE_NAME: ACPI.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294
FAILURE_BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
Followup: MachineOwner

IPnone 4s not recognized by Envy dv7-7333cl rnning Windows 8 when plugged into usb port

Laptop does not recognize iPhone 4s when plugged into any of the 4 usb ports. All usb drivers are up to date. All Win 8 and HP udates have been installed and are current. Ports do recognize memory sticks so seem to be working. Is there a special driver needed for iPhone?
This question was solved.
View Solution.

Hey texasbootz,
I'll have to get you to answer a few questions to understand what is going on exactly:
When the iPhone is plugged into the notebook, does it charge?
When the iPhone is plugged into the notebook, does it show up in device manager?
Is iTunes installed?
If it is not charged when plugged in, it is possible that the cable you are using isn't functioning properly, and you may need a replacement. Or, the iPhone itself is having some issues.
In any case, since other devices are working in all of your USB ports, it is possible that its either a software issue (with the iPhone's drivers) or an issue with the iPhone case. You'll have to contact Apple for support on either of those issues. I'd suggest trying to re/install iTunes, see if that fixes it, then to contact Apple.
Hope this helps!
I am an HP employee.
• Say thanks by clicking the 'Thumbs Up' button on the left
• Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

HT4367 Apple TV 2nd gen factory restore (blinking lights when plugged into TV)

I have a 2nd gen apple TV, and when doing the above steps my unit does not show up in iTunes...
I get rapid blinking lights when plugged into tv, and when plugged into itunes as per the steps here, itunes showing nothing.

After trying to update the Apple TV 2nd generation it had the plug into iTunes message. When I plug into iTunes 11 and hit restore a message comes up "The device cannot be found" rendering the device useless. Please help!

Audio Noise When Plugged Into AC Adapter

I have a dv9000 laptop which produces a sizzling/buzzing sound when plugged into the AC adapter. It makes the sound when headphones or external speakers are used. I have updated all drivers that the HP Support article mentioned, but still do not get any silence. It appears that the sound intensifies when the hard drive is used more.
Also, I found articles relating to the same issue, and improper grounding was determined to be the cause. I have a 3 pronged AC adapter, so the ground shouldn't be the problem.

" have a 3 pronged AC adapter, so the ground shouldn't be the problem."
Actually I bet it IS. Try a 3 prone grounding adapter (cheater plug) and let the ground float (leave disconnected). See if your problem doesn't go away. You most likely have a ground loop which I have wrestled with many times in the past with HP laptops. Unless you are sitting in a pool of water or get struck by lightening, you should be just fine 99.99999999% of the time. If you have any other powered external devices connected to the laptop such as hard drives, routers, etc THEY TOO may need to have their grounding floating. Report back your results.

Plays automatically when plugged into a device

Similar Messages

Maybe you are looking for