PlaysForSure Firmware upgrade for Zen Nano/Nano P

i think that it would be absolutely awesome if us nano/nano plus owners could listen to the suscription service music like Yahoo Music Unlimited and Napster to go. I want creative to come out with a firmware upgrade for the nano to make this possible. If you want this firmware upgrade, please sign.

SSR wrote:
There may be hardware limits that prevent these players from using subscription music, such as a secure realtime clock. Also this petition could probably be extended for all the flash players (whether capable or not).
But remember the Xtra and Touch got PFS support and I dont think they were designed with a secure clock in them.... so based on that flash players <i>could</i> have PFS support

Similar Messages

Firmware upgrade for zen mi

<DIV align=center><FONT color=#ff3300>firmware upgrade for creative ZEN MICRO. HOW ?
<DIV align=center><FONT color=#ff3300>
<DIV align=center><FONT color=#ff3300>i have downloaded the creative software upgrade program but didnt know how to us it. Can any one teach mi how to use the program so that i can update my zen micro software. Currently my zen is using the old software just thinking of changing to the new software as my friend say it is better then the old one . Help mi please !! thankxz....:robotsad:

The upgrade process is listed on the download page (click "show details"). Does this help, and if not what specific problem do you have?

2.00.12 Firmware Upgrade for Zen Mi

In trying to upgrade the firmware of my Zen Micro to version 2.00.2 to use PlayForSure / MTP software, I get the following message: "An application is interfering with the flash program. Please close all applications and all Explorer windows before proceeding". I have no applications or Explorer windows open, however. I have tried this on my Windows XP machines at home and at work and get the same error.
Any ideas about how to do the upgrade? I got the Zen Micro specifically for its PlayForSure capabilities. If I can't use it, I am returning it. I will also write a letter to PC Magazine about the problems, despite it getting an Editor's Choice rating.

Starting from scratch... you connect your Micro to the dock, MediaSource starts, you exit MediaSource, presumably the Micro doesn't show as docked, you start the firmware upgrade... correct?
Correct
Can you then detail the *exact* error you get?
There isn't an error as such, but when the player reboots (which it has to to install the firmware) Mediasource starts again as it thinks the Micro is docked again, when i close it down (Mediasource) it continues to upgrade the firmware until it says "rebooting player" then it does nothing, it doesn't reboot the player it just freezes.
What firmware upgrade are you trying to apply?
I'm upgrading from .02.05e to 2.0.2.0
Thanks for the help!

Write a Vista firmware upgrade for Zen Micro to Make Upgrading Simple. Not XP upgra

please just write a vista compatible firmware update for the zen micro. don't complicate matters, by telling us to download this: http://us.creative.com/support/downloads/download2.asp?MainCategory=23&Product=0795&dlcentr ic=9304&Product_Name=ZEN+Micro&filetype=4&OSName=W indows+XP first, run in XP, so that it could be used in vista. this is an oxymoron solution. maybe this does not register in your mind, but not all of us have 2 computers or have dual booting systems. this is just a plain lack of regards for your existing customers needs. you want to make this transition to be as difficult as possible for people stuck in this operating system upgrade limbo.

Zen_Micr0_User wrote:
please just write a vista compatible firmware update for the zen micro. don't complicate matters, by telling us to download this: http://us.creative.com/support/downloads/download2.asp?MainCategory=23&Product=0795&dlcentr ic=9304&Product_Name=ZEN+Micro&filetype=4&OSName=W indows+XP first, run in XP, so that it could be used in vista. this is an oxymoron solution. maybe this does not register in your mind, but not all of us have 2 computers or have dual booting systems. this is just a plain lack of regards for your existing customers needs. you want to make this transition to be as difficult as possible for people stuck in this operating system upgrade limbo.
I don't know man but that firmware has been around for years. Why didn't you upgrade? i also have a micro but did not have a problem since i updated the firmware like 3 years ago.Message Edited by rasstar on 05-04-20070:28 PM
Message Edited by rasstar on 05-04-200705:37 PM

Looking for Firmware upgrade for IPOD to play when connected to Onkyo RCVR ?

Onkyo support tells me their is a Firmware upgrade for my IPOD NANO that will allow it to play when connected to their reciever. Newer IPODS work fine. With my the Onkyo recognizes the IPOD, reacts like it is playing but does not play.

Connect it to your computer and upgrade it in iTunes.

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

Nomad Zen extra jukebox Firmware upgrade for Naps

I am sure that this has been posted before however, I am very keen to find out when this upgrade is available for my 30G jokebox?
Cheers!
Steve

This is the long-awaited Zen Xtra firmware upgrade; all current discussion about it is in the sticky at the top of this forum. (Per their policy, the moderators will eventually lock this thread in favor of the sticky.)
SSR, the top poster on this board (and an expert on Creative players), has an email list on his own website for new Creative player downloads: http://www.stainlesssteelrat.net/njb.htm . Though it's not specific to any one player, you can be sure the Zen Xtra firmware upgrade for MTP/Janus (the technology behind Napster To Go) will be announced there when it's available. (And it works, too: I just got word of the new Audible firmware for my Zen Micro thru that list.)Message Edited by RBBrittain on 09-8-2005 04:07 PM

Zen Micro PlaysForSure firmware upgrade fatal error - RESOL

First, sorry about poor english!
When i tried to upgrade my Zen Micro to the latest firmware i got the following message: "Creative Zen Micro PlaysForSure Firmware Upgrade: This application only supports Windows XP platform with at least Service Pack installed." The executable name was: ZenMicroP4S_PCFW_L6_2_2_02.exe and yes i have Windows XP SP2 installed on my computer. (and on the other three computers, where i got the exact error message.)Message Edited by kaszast on 0-26-2006 08:37 AM

Dear Creative!
You screwed the upgrade program a bit, because it is works ONLY IN ENGLISH version on Windows XP. Shame! You are pushing me into the sea of warez...

Firmware upgrade for Officejet 4500 G510n-z

Please. i need the firmware upgrade for Officejet 4500 G510n-z or at the original firmware. my machine is acting uncommon. The paper feeder process start and page stop in the middle.
thanks for all your help.
Regards;
Carlos Peguero

Yes, there should have been either a firmware update/patch, or a full recall on this device.
The software setup and configuration is bad enough for one humble computer, but when used as
intended with multiple devices it's an absolute headache.
I am constantly having to unplug the printer because the machine has decided it needs to rest for a bit. Okay,
everybody deserves a break now and then. But it goes into coma mode and I could be jesus himself and the power
or any other button) still would not wake it.
I would get into the rest but I'm not getting a helpful vibe from the forum; it's more defensive of a product which, apparently just under 5000 people have come by to check on. My friend at Microsoft talked to an HP engineer, who
laughed and gave us the fix.
Uploading to FedEx-Kinko's is the better option.

Firmware upgrade for WRT54G v7

is there no firmware upgrade for WRT54G v7? i didn't even find version7 as listed in linksys page for routers....

Click on Download and save the file on your Desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use dmin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab-Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware
upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Firmware upgrade for Westell UltraLine Series3 A90-9100EM15-10 ?

I'm wanting to check for/download install a firmware upgrade for my Westell UltraLine Series3 A90-9100EM15-10.
It's currently running
Software Version: 1.02.00.04
Release Date: Aug 28 2008
I'm hoping there's an upgrade available that fixes the HDMI Handshake/dropout problem?
Anyway, the screen I'm taken to after clicking "upgrade" in the router's management UI says :
Check every xx hours at URL _______
The field after "at URL" is not populated.
If I click "check now" I get:
"URL must be in the format: protocol://userassword@hostort/path where protocol is one of http, https, ftp or tftp. Either user or password, or both, may be left out. The port number is also optional."
Was that URL field supposed to be populated by the tech who installed the FIOS?
Where can I find that URL so I can paste it in and get my firmware updates?

Nevermind. I've found it. The link to 1.03.00.08 firmware is http://download.verizon.net/webdownload/firmware/upgrades/westell_router_9100em/A90-9100EM15-10-1.03...

Firmware upgrade for Nokia 6280

I would like to know do we have firmware upgrade for Nokia 6280 as my present one is 3.65 and would like to upgrade it to 5.92 and I am in India
Could you please help me out.

updating to new firmware depends on product code which represents your region of purchasing, language pack and if it's branded or not .... so NOKIA releases firmwares and release it for every product code depending on mentioned points
you can check for updates @ :
http://mea.nokia.com/support/download-software/device-software-update/can-i-update
To find what the latest available device software is, you’ll need your device’s product code. The code is printed on the white label beneath the battery (e.g. CODE: 0520001).
if your phone is branded with an operator, that means that you should go to the operator care center and ask them, not NOKIA
some updates delay in some countries variant product code, as it requires more effort to add language pack to it like "example. China Japan Korea" or it needs the country to approve it due to its policy
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Firmware Upgrade for Actiontec GT704WG Rev. B Router

How do I find the firmware upgrade for the Actiontec GT704WG Rev. B Router? Almost everytime I try to get onto the internet, I have to run the troubleshooter because there is no connection and the final diagnosis is that "The default gateway is unavailable." Googled and found that it is due to the need for a firmware update for the router but cannot find one on the internet. Help!!!

Hi Funrunner
You didn't say which version of the firmware you are currently running, however the latest firmware for that router is Version
3.20.3.3.5.0.9.2.14
Thank you,
Peter
Peter_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Firmware upgrade for playbook

Where can I find the firmware upgrade for my BB playbook? and where can I find documentation on how to do it?
also, does firmware upgrade include the operating system as well, like in other tablets?
Solved!
Go to Solution.

there is no firmware update that I have heard about.
There is an OS update due in February
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Will the Software Update to 10.4.7 install firmware upgrade for SuperDrive?

Will the Software Update to 10.4.7 install firmware upgrade for a SuperDrive?
I have a Mac mini and I've just let the Software Update run as needed, but I am confused by the number of Apple update downloads listed.
I don't believe I need them, when I just use Software Update?
Seems like a simple question, but I was on Windows for the last 10 years.
Thanks,
--Todd
Mini Mac OS X (10.4.7)

Believe Software Update.

PlaysForSure Firmware upgrade for Zen Nano/Nano P

Similar Messages

Maybe you are looking for